Regression Analysis of Orthogonal, Cylindrical and Multivariable Color Parameters for Colorimetric Surface pH Measurement of Materials.

The surface pH is a critical factor in the quality and longevity of materials and products. Traditional fast colorimetric pH detection-based tests such as water quality control or pregnancy tests, when results are determined by the naked eye, cannot provide quantitative values. Using standard pH papers, paper-printed comparison charts, or colorimetric microfluidic paper-based analytical devices is not suitable for such technological applications and quality management systems (QMSs) where the particular tested material should contain a suitable indicator in situ, in its structure, either before or after the process, the technology or the apparatus that are being tested. This paper describes a method based on the combination of impregnation of a tested material with a pH indicator in situ, its exposure to a process of technology whose impact on pH value is to be tested, colorimetric pH measurement, and approximation of pH value using derived pH characteristic parameters (pH-CPs) based on CIE orthogonal and cylindrical color variables. The hypotheses were experimentally verified using the methyl red pH indicator, impregnating the acid lignin-containing paper, and preparing a calibration sample set with pH in the range 4 to 12 using controlled alkalization. Based on the performed measurements and statistical evaluation, it can be concluded that the best pH-CPs with the highest regression parameters for pH are √∆E, ln (a),√∆H (ab), a/L, h/b and ln (b/a). The experimental results show that the presented method allows a good estimation of pH detection of the material surfaces.

Solid-phase microcolumn extraction and gas chromatography-mass spectrometry identification of volatile organic compounds emitted by paper.

A rapid non-destructive sampling technique for the analysis of volatile organic compounds (VOCs) emitted by paper sheets is described. A capillary, which is connected to a microcolumn packed with Tenax TA, is inserted between two sheets at the centre of a paper stack encapsulated inside a PET/Al/PE composite foil. The other end of the microcolumn is connected to a gas-tight syringe and an appropriate volume of gaseous phase is aspirated. The microcolumn is then thermally desorbed in a modified GC inlet (modification is presented) and analysed by gas chromatography-mass spectrometry (GC-MS). In the chromatogram from the analysis of artificially aged paper sample 21 compounds were identified. Advantages of the method including the short sampling time (1 min), simplicity and economic aspect are discussed.

1-Methyl-6-nitro-1H-benzimidazole.

The title compound, C(8)H(7)N(3)O(2), a potential anti-tumour drug and an anti-oxidant agent, was studied in order to give more insight into structure-function relationships. The 1-methyl-benzimidazole unit of the mol-ecule was found to be exactly planar and the nitro group is inclined at an angle of 10.4 (2)° to the plane of the heterocycle. The bond lengths in the present derivative were analyzed in details and compared with those of the parent unsubstituted analogues in the Cambridge Structural Database. The results have shown that the additional nitro group is not involved in conjugation with the adjacent π-system and hence has no effect on the charge distribution of the heterocyclic ring.

Characterization of Klason lignins by reversed-phase high-performance liquid chromatography using wide-pore octadecylsilica and stepwise gradients of dimethylformamide in water.

RP-HPLC using stepwise gradients of N,N-dimethylformamide (DMF) in a phosphate-buffered (pH 3.00) aqueous mobile phase and a wide-pore (30 nm) octadecylsilica column has been applied to the analysis of a variety of lignins--organocell lignin, dioxane lignin, Björkman lignin, and Klason lignins from both softwoods and hardwoods, respectively, in order to demonstrate the usefulness of the approach for their characterization. Tandem combination of spectrophotometric diode array detection and fluorimetric detection was used to acquire more detailed information about the chromatographic behavior of lignins. The results show that a ten-step gradient can reveal distinct features of lignins and humic substances. Combination of good solvating properties of DMF for lignins together with a wide-pore RP sorbent improves surface interactions of the analytes and suppresses the influence of size exclusion effects. Thus it provides reproducibility of characterization profiles and robustness of the method. The calculated repeatability of the retention time of selected peaks was +/- 0.46% RSD. The reproducibility of the data within one week (set of seven data) was +/- 1.1% RSD. These data are also representative of the other well-shaped peaks of analyzed substances.