Tetrodotoxin for Chemotherapy-Induced Neuropathic Pain: A Randomized, Double-Blind, Placebo-Controlled, Parallel-Dose Finding Trial.

Tetrodotoxin (TTX) has emerged as a potentially efficacious agent for chemotherapy-induced neuropathic pain (CINP), a prevalent, debilitating condition often resistant to analgesics. This randomized, double-blind, dose-finding study was undertaken to explore safety and trends in efficacy of four TTX doses and to identify a dose for further study. One hundred and twenty-five patients with taxane- or platinum-related CINP received subcutaneous placebo or TTX (7.5 µg twice daily (BID), 15 µg BID, 30 µg once daily (QD), 30 µg BID) for four consecutive days. Primary outcome measure was average patient-reported Numeric Pain Rating Scale (NPRS) score during Days 21-28 post-treatment. Changes in mean NPRS score were not statistically different between cohorts, due to small trial size and influence of a few robust placebo responders. Cumulative responder analysis showed significant difference from placebo with 30 µg BID cohort using the maximum response at any timepoint (p = 0.072), 5-day (p = 0.059), 10-day (p = 0.027), and 20-day (p = 0.071) rolling averages. In secondary quality of life (QOL) outcomes, 30 µg BID cohort also differed significantly from placebo in a number of SF-36 and CIPN20 subscales. Most adverse events (AE) were mild or moderate with oral paresthesia (29.6%) and oral hypoesthesia (24.8%) as most common.

Safety, Tolerability, Pharmacokinetics, and Concentration-QTc Analysis of Tetrodotoxin: A Randomized, Dose Escalation Study in Healthy Adults.

Tetrodotoxin (TTX) is a highly specific voltage-gated sodium channel (VGSC) blocker in clinical evaluation as a peripheral-acting analgesic for chronic pain. This study presents the first published results of the safety including cardiac liability of TTX at therapeutic-relevant concentrations in twenty-five healthy adults. Randomized, double-blind, placebo-, and positive- (moxifloxacin) controlled study evaluated single ascending doses of 15 µg, 30 µg, and 45 µg TTX over 3 periods with a 7-day washout between each period. Subcutaneous injections of TTX were readily absorbed, reaching maximum plasma concentration (Cmax) within 1.5 h. Both extent of exposure (AUC) and Cmax increased in proportion to dose. No QT prolongation was identified by concentration-QTc analysis and the upper bounds of the two-sided 90% confidence interval of predicted maximum baseline and placebo corrected QTcF (ΔΔQTcF) value did not exceed 10 ms for all tetrodotoxin doses, thereby meeting the criteria of a negative QT study. Safety assessments showed no clinically relevant changes with values similar between all groups and no subject withdrawing due to adverse events. Paresthesia, oral-paresthesia, headache, dizziness, nausea, and myalgia were the most common TEAEs (overall occurrence ≥5%) in the TTX treatment groups. TTX doses investigated in this study are safe, well-tolerated, and lack proarrhythmic proclivity.

Direct measurement of the kinetics of CBM9 fusion-tag bioprocessing using luminescence resonance energy transfer.

The economics of affinity-tagging technologies, particularly at preparative scales, depends in part on the cost and efficiency of the bioprocessing step used to remove the affinity tag and obtain the final purified product (Lowe et al., J Biochem Biophys Methods. 2001;49:561-574). When CBM9, the family 9 cellulose binding module from Thermotoga maritima, serves as the affinity tag, the overall efficiency of tag removal is a function of the choice of processing enzyme and the local structure of the cleavage site, most notably the linker sequence flanking the bioprocessing recognition site on the tag side. A novel spectroscopic method is reported and used to rapidly and accurately measure CBM9 fusion-tag bioprocessing kinetics and their dependence on the choice of linker sequence. The assay monitors energy transfer between a lanthanide-based donor bound to the CBM9 tag and an acceptor fluorophore presented on the target protein or peptide. Enzyme-catalyzed cleavage of the fusion tag terminates this resonance energy transfer, resulting in a change in fluorescence intensity that can be monitored to quantify substrate concentration over time. The assay is simple, fast and accurate, providing k(cat)/K(M) values that contain standard errors of less than 3%. As a result, both substantial and subtle differences in bioprocessing kinetics can be measured and used to guide bioproduct design.

Mechanically stable porous cellulose media for affinity purification of family 9 cellulose-binding module-tagged fusion proteins.

A mechanically stable cellulose-based chromatography media was synthesized to permit inexpensive affinity purification of recombinant proteins containing the family 9 carbohydrate-binding module (CBM9) fused to either the N- or C-terminus of the target protein. A second-order response surface model was used to identify optimal concentrations of the primary reactants, epichlorohydrin and dimethyl sulfoxide (DMSO), required to cross-link the starting material, Perloza MT100, a compressible but inexpensive cellulose-based chromatography resin. This resulted in a mechanically stable cross-linked affinity chromatography media capable of operating at an order-of-magnitude higher linear velocity than permitted by unmodified MT100. Moments and Van Deemter analyses were used to show that rates of solute mass transfer within the column are largely unaffected by the cross-linking reaction, while the binding capacity decreased by 20% to 7.1 micromol of protein/g resin, a value superior to most commercial affinity chromatography media. In sharp contrast to MT100, the mechanical stability and purification performance of the cross-linked media are not diminished by scale-up or repeated column use.

A novel two-zone protein uptake model for affinity chromatography and its application to the description of elution band profiles of proteins fused to a family 9 cellulose binding module affinity tag.

A novel two-zone model (TZM) is presented to describe the rate of solute uptake by the stationary phase of a sorption-type chromatography column. The TZM divides the porous stationary-phase particle into an inner protein-free core and an outer protein-containing zone where intraparticle transport is limited by pore diffusion and binding follows Langmuir theory. The TZM and the classic pore-diffusion model (PDM) of chromatography are applied to the prediction of stationary-phase uptake and elution bands within a cellulose-based affinity chromatography column designed to selectively purify proteins genetically labelled with a CBM9 (family 9 cellulose binding module) affinity tag. Under both linear and nonlinear loading conditions, the TZM closely matches rates of protein uptake within the stationary phase particles as measured by confocal laser scanning microscopy, while the PDM deviates from experiment in the linear-binding region. As a result, the TZM is shown to provide improved predictions of product breakthrough, including elution behavior from a bacterial lysate feed.

Strategy for selecting and characterizing linker peptides for CBM9-tagged fusion proteins expressed in Escherichia coli.

The influence of linker design on fusion protein production and performance was evaluated when a family 9 carbohydrate-binding module (CBM9) serves as the affinity tag for recombinant proteins expressed in Escherichia coli. Two bioinformatic strategies for linker design were applied: the first identifies naturally occurring linkers within the proteome of the host organism, the second involves screening peptidases and their known specificities using the bioinformatics software MEROPS to design an artificial linker resistant to proteolysis within the host. Linkers designed using these strategies were compared against traditional poly-glycine linkers. Although widely used, glycine-rich linkers were found by tandem MS data to be susceptible to hydrolysis by E. coli peptidases. The natural (PT)(x)P and MEROPS-designed S(3)N(10) linkers were significantly more stable, indicating both strategies provide a useful approach to linker design. Factor X(a) processing of the fusion proteins depended strongly on linker chemistry, with poly(G) and S(3)N(10) linkers showing the fastest cleavage rates. Luminescence resonance energy transfer studies, used to measure average distance of separation between GFP and Tb(III) bound to a strong calcium-binding site of CBM9, revealed that, for a given linker chemistry, the separation distance increases with increasing linker length. This increase was particularly large for poly(G) linkers, suggesting that this linker chemistry adopts a hydrated, extended configuration that makes it particularly susceptible to proteolysis. Differential scanning calorimetry studies on the PT linker series showed that fusion of CBM9 to GFP did not alter the T(m) of GFP but did result in a destabilization, as seen by both a decrease in T(m) and DeltaH(cal), of CBM9. The degree of destabilization increased with decreasing length of the (PT)(x)P linker such that DeltaT(m) = -8.4 degrees C for the single P linker.

Affinity-tagged green fluorescent protein (GFP) extraction from a clarified E. coli cell lysate using a two-phase aqueous micellar system.

Green fluorescent protein (GFP) has been proposed as an ideal choice for a protein-based biological indicator for use in the validation of decontamination or disinfection treatments. In this article, we present a potentially scalable and cost-effective way to purify recombinant GFP, produced by fermentation in Escherichia coli, by affinity-enhanced extraction in a two-phase aqueous micellar system. Affinity-enhanced partitioning, which improves the specificity and yield of the target protein by specific bioaffinity interactions, has been demonstrated. A novel affinity tag, family 9 carbohydrate-binding module (CBM9) is fused to GFP, and the resulting fusion protein is affinity-extracted in a decyl beta-D-glucopyranoside (C10G1) two-phase aqueous micellar system. In this system, C10G1 acts as phase forming and as affinity surfactant. We will further demonstrate the implementation of this concept to attain partial recovery of affinity-tagged GFP from a clarified E. coli cell lysate, including the simultaneous removal of other contaminating proteins. The cell lysate was partitioned at three levels of dilution (5x, 10x, and 40x). Irrespective of the dilution level, CBM9-GFP was found to partition preferentially to the micelle-rich phase, with the same partition coefficient value as that found in the absence of the cell lysate. The host cell proteins from the cell lysate were found to partition preferentially to the micelle-poor phase, where they experience less excluded-volume interactions. The demonstration of proof-of-principle of the direct affinity-enhanced extraction of CBM9-GFP from the cell lysate represents an important first step towards developing a cost-effective separation method for GFP, and more generally, for other proteins of interest.

Affinity-enhanced protein partitioning in decyl beta-D-glucopyranoside two-phase aqueous micellar systems.

Liquid-liquid extraction in two-phase aqueous complex-fluid systems has been proposed as a scalable, versatile, and cost-effective purification method for the downstream processing of biotechnological products. In the case of two-phase aqueous micellar systems, careful choices of the phase-forming surfactants or surfactant mixtures allow these systems to separate biomolecules based on size, hydrophobicity, charge, or specific affinity. In this article, we investigate the affinity-enhanced partitioning of a model affinity-tagged protei--green fluorescent protein fused to a family 9 carbohydrate-binding module (CBM9-GFP)--in a two-phase aqueous micellar system generated from the nonionic surfactant n-decyl beta-D-glucopyranoside (C10G1), which acts simultaneously as the phase-former and the affinity ligand. In this simple system, CBM9-GFP was extracted preferentially into the micelle-rich phase, despite the opposing tendency of the steric, excluded-volume interactions operating between the protein and the micelles. We obtained more than a sixfold increase (from 0.47 to 3.1) in the protein partition coefficient (Kp), as compared to a control case where the affinity interactions were "turned off" by the addition of a competitive inhibitor (glucose). It was demonstrated conclusively that the observed increase in Kp can be attributed to the specific affinity between the CBM9 domain and the affinity surfactant C10G1, suggesting that the method can be generally applied to any CBM9-tagged protein. To rationalize the observed phenomenon of affinity-enhanced partitioning in two-phase aqueous micellar systems, we formulated a theoretical framework to model the protein partition coefficient. The modeling approach accounts for both the excluded-volume interactions and the affinity interactions between the protein and the surfactants, and considers the contributions from the monomeric and the micellar surfactants separately. The model was shown to be consistent with the experimental data, as well as with our current understanding of the CBM9 domain.

Inexpensive and generic affinity purification of recombinant proteins using a family 2a CBM fusion tag.

The selective binding of the family 2a carbohydrate binding module (CBM2a) of xylanase 10A of the soil bacterium Cellulomonas fimi to a variety of cellulosic substrates is shown to provide a new, cost-effective affinity chromatography system for purification of recombinant protein. Genetic linkage of CBM2a to a target protein, in this case protein A from Staphylococcus aureus, results in a fusion protein that binds strongly to the particulate-cellulose resin Avicel PH101 and retains the biological activity of the fusion partner. Affinity purification of protein A-CBM2a from the supernatant of a recombinant E. coli JM101 culture results in a product purity of greater than 95% and a product concentration factor of 34 +/- 3. Measured column parameters are combined with one-dimensional equations governing continuity and intraparticle diffusion to predict product breakthrough curves with good accuracy over the range of realistic operating conditions. Peak spreading within the column is controlled by intraparticle diffusion for CBM2a and by a combination of film mass transfer and intraparticle diffusion for the larger protein A-CBM2a fusion protein.

Inexpensive one-step purification of polypeptides expressed in Escherichia coli as fusions with the family 9 carbohydrate-binding module of xylanase 10A from T. maritima.

A novel inexpensive affinity purification technology is described based on recombinant expression in Escherichia coli of the polypeptide or protein target fused through its N-terminus to TmXyn10ACBM9-2 (CBM9), the C-terminal family 9 carbohydrate-binding module of xylanase 10A from Thermotoga maritima. Measured association constants (K(a)) for adsorption of CBM9 to insoluble allomorphs of cellulose are between 2 x 10(5) and 8 x 10(6) M(-1). CBM9 also binds a range of soluble sugars, including glucose. As a result, a 1M glucose solution is effective in eluting CBM9 and CBM9-tagged fusion proteins from a very inexpensive commercially-available cellulose-based capture column. A processing site is encoded at the C-terminus of the tag to facilitate its rapid and quantitative removal by Factor X(a) to recover the desired target protein sequence following affinity purification. Fusion of the CBM9 affinity tag to the N-terminus of green fluorescent protein (GFP) from the jellyfish, Aquorin victoria, is shown to yield >200 mgl(-1) of expressed soluble fusion protein that can be affinity separated from clarified cell lysate to a purity of >95% at a yield of 86%.

Enhancement of coxsackievirus B3 infection by antibody to a different coxsackievirus strain.

Group B coxsackieviruses (CVBs) are a major cause of viral myocarditis and pancreatitis in humans and produce a similar pattern of disease in inbred strains of mice. As there are six strains of CVBs, individuals can be infected with multiple serotypes. This raises the possibility of antibody enhancement of infectivity (AEI) by cross-reactive but non-neutralizing antibody to a different strain from a prior infection. To determine whether AEI plays a role in coxsackievirus pathogenesis, an in vitro system using the murine macrophage cell line J774.1 was tested for enhanced infection when incubated with CVB3 plus anti-CVB2 antibody. Yields of virus were found to increase by 10-50-fold and the percentage of infected cells increased proportionately. The effect was Fc-mediated as F(ab')2 fragments of the antibody could not mediate the effect. To determine whether AEI could also be demonstrated in vivo CVB3 was injected into 5-week-old mice together with mouse polyclonal anti-CVB2. Controls included mice injected with PBS or CVB3 alone. Results showed that the titres of virus in tissues of animals injected with virus plus antibody were 1-2 logs higher than when virus was injected alone. This was accompanied by greater histopathological damage, particularly in the heart. These results have implications for human disease as infection with multiple strains likely occurs during the lifetime of an individual.