Relationship between a gum-chewing routine and oral, physical, and cognitive functions of community-dwelling older adults: A Kashiwa cohort study.

AIM: As associations between oral function and general health have been reported in community-dwelling older adults, easily implementable preventive measures are urgently required. We focused on the health benefits of gum chewing, as no studies have been carried out on the impact of gum-chewing routines on the health of older adults. This cross-sectional study aimed to determine whether the gum-chewing routine is associated with oral, physical and cognitive functions in community-dwelling older adults. METHODS: This study included 1617 community-dwelling older participants in a health survey carried out in 2021. The gum-chewing routine and weekly chewing time were assessed using a self-administered questionnaire. The outcome measures, including actual measurements of oral function, physical function, cognitive function, dietary intake and lifestyle, were evaluated using self-administered questionnaires or health surveys. RESULTS: We analyzed 1474 (mean age 76.1 ± 5.8 years, 45% women) participants for whom all data were not missing, and 14% of them had a gum-chewing routine for more than 30 min weekly. Oral functions were significantly higher in older adults with a gum-chewing routine, and there were substantially fewer participants with oral frailty (adjusted odds ratio 0.581, 95% confidence interval 0.340-0.993). Additionally, cognitive and physical functions, including grip strength, were significantly higher in the gum-chewing routine group. CONCLUSIONS: Community-dwelling older adults with a gum-chewing routine have higher oral, physical and cognitive functions. These findings indicate that a gum-chewing routine might contribute to maintaining oral function and preventing frailty. Geriatr Gerontol Int 2024; 24: 68-74.

Effect of attachment type on distal bodily movement of the maxillary canine in aligner orthodontics: a finite element study.

OBJECTIVES: To clarify the effect of attachment types on bodily movement of the maxillary canine in aligner orthodontics. MATERIALS AND METHODS: Using an aligner, the canine was moved bodily by 0.1 mm distally as a target position. Orthodontic tooth movement was simulated using the finite element method (FEM). The alveolar socket was displaced in the same manner as the initial movement caused by elastic deformation of the periodontal ligament. First, the initial movement was calculated, and then the alveolar socket was displaced in the same direction and with the same magnitude as the initial movement. These calculations were repeated to move the teeth after placement of the aligner. The teeth and the alveolar bone were assumed to be rigid bodies. A FEM model of the aligner was made based on the crown surfaces. The thickness of the aligner was 0.45 mm, and its Young's modulus was 2 GPa. Three types of attachments-semicircular couple, vertical rectangular, and horizontal rectangular-were placed on the canine crown. RESULTS: Regardless of the type of attachment, upon placement of the aligner on the dentition the crown of the canine moved to the target position, while the apex hardly moved. That is, the canine tipped and rotated. After repeating the calculation, the canine became upright and moved bodily regardless of the attachment type. In the aligner without an attachment, the canine did not become upright. CONCLUSIONS: There was almost no difference among attachment types in terms of achieving bodily movement of the canine.

Oral frailty as a risk factor for mild cognitive impairment in community-dwelling older adults: Kashiwa study.

BACKGROUND: Oral frailty is defined as a slight decline in comprehensive oral function and can predict the onset of adverse health outcomes including morbidity in community-dwelling older adults. Previously, the number of remaining teeth and masticatory status had been suggested to be associated with cognitive decline. The effects of comprehensive oral condition on cognitive decline have not been adequately examined. In this study, we aimed to examine whether oral frailty is associated with new-onset mild cognitive impairment (MCI) among community-dwelling older adults. METHODS: Two thousand and forty-four participants of a longitudinal cohort study in Kashiwa City, Chiba Prefecture, without cognitive decline who participated in at least one follow-up survey, were included. New-onset MCI was assessed using the Mini-Mental State Examination (score < 27 defined as MCI). Oral frailty was evaluated based on six components including the number of remaining teeth, masticatory status, tongue pressure, oral motor skills, and subjective difficulties in eating and swallowing. "Oral non-frailty" was defined as good performance on all six measures, "oral pre-frailty" was defined as poor performance on one or two measures, and "oral frailty" was defined as poor performance on three or more measures. Statistical analysis was performed, mainly using a Cox proportional hazards model. RESULTS: Of the 1410 participants who did not fit the exclusion criteria (mean 72.4 ± 5.2 years; 49 % female), 19 % had new-onset MCI during the follow-up period. When comparing the status of oral frailty (non-frailty, oral pre-frailty, and oral frailty), the oral frailty group had a significantly higher hazard ratio for new-onset MCI than the other groups, even after adjusting for confounding factors. Among the six components, a decrease in the number of remaining teeth, low tongue pressure, and difficulty eating tough foods significantly correlated with new-onset MCI. Additionally, we found individuals with co-existing oral frailty and physical frailty to be associated with an increased risk of MCI. However, no significant increase in hazard ratio was observed in participants with either physical or oral frailty. CONCLUSIONS: The study findings suggest that oral frailty could predict the risk of new-onset MCI in community-dwelling older adults. Further, we found that oral frailty with physical frailty exacerbated this risk, implying the existence of direct or additive effects on cognitive dysfunction. Comprehensive oral health focusing on maintaining eating function can be a strategy to prevent MCI and delay dementia in community-dwelling older adults.

Phosphatidylcholine-Plasmalogen-Oleic Acid Has Protective Effects against Arachidonic Acid-Induced Cytotoxicity.

Plasmalogens are a group of glycerophospholipids containing a vinyl-ether bond at the sn-1 position in the glycerol backbone. Cellular membrane plasmalogens are considered to have important roles in homeostasis as endogenous antioxidants, differentiation, and intracellular signal transduction pathways including neural transmission. Therefore, reduced levels of plasmalogens have been suggested to be associated with neurodegenerative diseases such as Alzheimer's disease. Interestingly, although arachidonic acid is considered to be involved in learning and memory, it could be liberated and excessively activate neuronal activity to the excitotoxic levels seen in Alzheimer's disease patients. Here, we examined the protective effects of several kinds of plasmalogens against cellular toxicity caused by arachidonic acid in human neuroblastoma SH-SY5Y cells. As a result, only phosphatidylcholine-plasmalogen-oleic acid (PC-PLS-18) showed protective effects against arachidonic acid-induced cytotoxicity based on the results of lactate dehydrogenase release and ATP depletion assays, as well as cellular morphological changes in SH-SY5Y cells. These results indicate that PC-PLS-18 protects against arachidonic acid-induced cytotoxicity, possibly via improving the stability of the cellular membrane in SH-SY5Y cells.

Biomechanical analysis of the maxillary molar intrusion: A finite element study.

INTRODUCTION: The purpose of this study was to analyze and clarify tooth movement when intruding the maxillary molars using intrusive forces between the maxillary first and second molars. METHODS: A finite element method was used to simulate the long-term orthodontic movement of the maxillary dentition by accumulating the initial displacement of teeth produced by elastic deformation of the periodontal ligament. Intrusive forces of 2 N were applied buccally to the archwire between the maxillary first and second molars. Two different sized transpalatal arches (TPAs) (0.036-in and 0.06-in) and a gradually increased constriction bend and torque toward the posterior teeth were applied to prevent buccal tipping of the posterior teeth when intruding the maxillary posterior teeth. RESULTS: The whole maxillary dentition rotated clockwise as the intrusive force passed posteriorly to the center of resistance. Buccal crown tipping of the maxillary posterior teeth and lingual tipping of the maxillary incisors occurred. Their tipping decreased with a constriction bend and lingual crown torque and when a TPA was applied. CONCLUSIONS: Supplemental procedures such as a constriction bend and lingual crown torque and a TPA could effectively prevent the buccal crown tipping of the maxillary posterior teeth when intruding on them.

Tooth Movement Efficacy of Retraction Spring Made of a New Low Elastic Modulus Material, Gum Metal, Evaluated by the Finite Element Method.

The aim of this study was to evaluate the tooth movement efficacy of retraction springs made of a new ß-titanium alloy, "gum metal", which has a low Young's modulus and nonlinear super elasticity. Using double loop springs incorporated into an archwire made of gum metal (GUM) and titanium molybdenum alloy (TMA), the maxillary anterior teeth were moved distally to close an extraction space. The long-term movements were simulated by the finite element method. Its procedure was constructed of two steps, with the first step being the calculation of the initial tooth movement produced by elastic deformation of the periodontal ligament, and in the second step, the alveolar socket was moved by the initial tooth movement. By repeating these steps, the tooth moved by accumulating the initial tooth movement. The number of repeating calculations was equivalent to an elapsed time. In the GUM and TMA springs, the anterior teeth firstly tipped lingually, and then became upright. As a result of these movements, the canine could move bodily. The amount of space closure in GUM spring was 1.5 times that in TMA spring. The initial tipping angle of the canine in the GUM spring was larger than that in the TMA spring. The number of repeating calculations required for the bodily movement in the GUM spring was about two times that in the TMA spring. It was predicted that the speed of space closure in the GUM spring was smaller than that in the TMA spring.

Biomechanical analysis for total distalization of the maxillary dentition: A finite element study.

INTRODUCTION: This study aimed to identify the tooth movement patterns relative to various force angulations (FAs) when distalizing the total maxillary dentition. METHODS: Long-term orthodontic movement of the maxillary dentition was simulated by accumulating the initial displacement of teeth produced by elastic deflection of the periodontal ligament using a finite element analysis. Distalization forces of 3 N were applied to the archwire between the maxillary canine and first premolar at 5 different FAs (-30°, -15°, 0°, 15°, and 30°) to the occlusal plane. RESULTS: Maxillary incisors and molars showed lingual and distal tipping at all FAs, respectively. At a force angulation of 30°, almost bodily distalization of the total maxillary dentition occurred, but incisors showed considerable lingual tipping because of the effect of clearance gap (0.003-in, 0.022 × 0.025-in bracket slot, 0.019 × 0.025-in archwire) and elastic deflection of the archwire. Medial displacement of the maxillary anterior teeth occurred because of lingual tipping during distalization. The occlusal plane rotated clockwise at all FAs because of extrusion of the maxillary incisors and intrusion of the maxillary second molars, and the amounts decreased as FA increased. CONCLUSIONS: Tooth movement patterns during distalization of the total maxillary dentition were recognized. With an understanding of the mechanics, a proper treatment plan can be established.

Biomechanical analysis for total mesialization of the maxillary dentition: A finite element study.

INTRODUCTION: The purpose of this study was to analyze and clarify tooth movement during mesialization of the whole maxillary dentition with various force angulations (FAs). METHODS: A finite element method was used to simulate the long-term orthodontic movement of the maxillary dentition by accumulating the initial displacement of teeth produced by elastic deformation of the periodontal ligament. A mesial force of 3 N was applied to the maxillary second molar at 5 different FAs (-30°, -15°, 0°, 15°, and 30°) to the occlusal plane. RESULTS: At an FA of 28°, the line of action of the force passed through the center of resistance of the maxillary whole dentition. With all FAs, the central incisors and molars tipped labially and mesially, respectively. The tipping angles gradually decreased as the FAs shifted from -30° to 30°. The molars tipped lingually with FAs of -30° and -15°, whereas they tipped buccally with FAs of 0°, 15°, and 30°. The molars tended to rotate mesiolingually more as the angle of force increased toward an FA of 30°. The occlusal plane rotated counterclockwise with FAs of -30°, -15°, and 0°, whereas it rotated clockwise with FAs of 15° and 30°. With an FA of 30°, buccal tipping and mesiolingual rotation of the molars, and the change in the occlusal plane angle decreased when the transpalatal arch (TPA) was fixed to the first molars and decreased, even more when the TPA was fixed to the second molars rather than the first molars, when a thicker TPA was used, and when the TPA was fixed to both molars rather than a single molar. CONCLUSIONS: There was a correlation between tooth movement during mesialization of the whole maxillary dentition and the angle at which the force was applied.

Prevalence and risk factors of sarcopenia in community-dwelling older adults visiting regional medical institutions from the Kadoma Sarcopenia Study.

This study aimed to investigate risk factors for sarcopenia in community-dwelling older adults visiting regional medical institutions. We retrospectively analyzed medical records of 552 participants (mean age: 74.6 ± 6.7 years, males 31.3%) who underwent body composition evaluation between March 2017 and December 2018 at one of 24 medical institutions belonging to the Kadoma City Medical Association in Japan. We collected the participant's characteristics and laboratory data. Sarcopenia was diagnosed according to the Asian Working Group for Sarcopenia 2019. Sarcopenia, including severe sarcopenia, was detected in 22.3% of all participants, 17.3% of men, and 24.5% of women; rates increased with age. Multivariate logistic regression analysis revealed age (odds ratio [OR]: 2.12; 95% confidence interval [CI] 1.20-3.75), obesity (OR: 0.15; 95% CI 0.07-0.32), hypertension (OR: 0.44; 95% CI 0.25-0.76), certification of long term care (OR: 3.32; 95% CI 1.41-7.81), number of daily conversations (OR: 0.44; 95% CI 0.25-0.77), and malnutrition (OR: 2.42; 95% CI 1.04-5.60) as independent predictors of sarcopenia. Receiver operating characteristic curve analysis demonstrated that the cut-off for daily conversations defining sarcopenia was 4.8 persons. The prevalence of sarcopenia in this study was 22.3%. Besides traditional risk factors for sarcopenia, the number of daily conversations was an independent factor.

Biomechanical analysis for total mesialization of the mandibular dentition: A finite element study.

OBJECTIVES: To clarify the mechanics of tooth movement in mesialization of the whole mandibular dentition when changing the force angulation. SETTING: A finite element method was used to simulate long-term movements of the whole mandibular dentition. MATERIAL AND METHODS: Tooth movement was simulated by accumulating the initial displacement, which was produced by elastic deformation of the periodontal ligament. Mesial forces of 3 N were applied to the second molar bracket at -30°, -15°, 0°, 15° and 30° to the occlusal plane. RESULTS: The whole dentition and occlusal plane were rotated depending on the direction of the force with respect to the centre of resistance (CR). At a force angulation of -30°, the line of action of the force passed near the CR, and the whole dentition translated without rotation of the occlusal plane. The second molar tipped buccally due to a clearance gap between the archwire and bracket slot. When increasing a force angulation from -30°, the line of action of the force passed above the CR, and thereby, the occlusal plane rotated clockwise. This rotation of the whole dentition induced tipping of the individual teeth. Buccal tipping of the molar due to an elastic deformation of the archwire was prevented by using a lingually pre-bent archwire. CONCLUSIONS: Careful selection of force angulation and biomechanics is essential to obtain proper tooth movement in total mesialization of the mandibular dentition.

Effects of Attachment of Plastic Aligner in Closing of Diastema of Maxillary Dentition by Finite Element Method.

The aim of this study was to clarify the effect of attachment on tooth movement produced by a plastic aligner. Closing of a diastema, in which the maxillary right and left central incisors moved bodily, was simulated using a finite element method. Long-term orthodontic movements of the maxillary dentition were simulated by accumulating the initial displacement of teeth produced by elastic deformation of the periodontal ligament. The incisor tipped and rotated just after placement of the aligner irrespective of the attachment. After a sufficiently long time, the incisor was upright and moved bodily in the aligner with attachment, but the incisor remained tipped in the aligner without attachment. It was demonstrated that the attachment was effective for achieving bodily movement.

A finite element analysis of the effects of archwire size on orthodontic tooth movement in extraction space closure with miniscrew sliding mechanics.

BACKGROUND: Sliding mechanics with miniscrews is recently used for extraction space closure. The purpose of this study was to elucidate how and why the archwire size affects long-term tooth movement in miniscrew sliding mechanics. METHODS: Long-term orthodontic tooth movements were simulated based on a remodeling law of the alveolar bone by using a finite element method, in which the bracket rotated freely within a clearance gap (a play) of the archwire-bracket slot. The archwire size was changed to 0.021, 0.018, and 0.016 in. for the 0.022-in. bracket. RESULT: Lingual crown tipping and extrusion of the incisors increased with decreasing the archwire size. Movements of the posterior teeth were approximately the same irrespective of archwire size. CONCLUSIONS: When decreasing the archwire size, a play of the archwire-bracket slot, as well as the elastic deformation of the archwire, resulted in lingual tipping of the incisors. This tipping led to extrusion of the incisors.

A retrospective analysis on the utility and complications of upper arm ports in 433 cases at a single institute.

BACKGROUND: We have employed upper arm central venous ports (UACVPs) since 2006 for long-term intravenous chemotherapy (CTx) or fluid supplementation. We evaluated the long-term availability of CVPs implanted in the upper arm to determine whether UACVPs could be one of the treatment options besides chest CVPs in terms of CVP-related complications. METHODS: We reviewed the medical records of all patients who underwent subcutaneous implantation of UACVPs at Kyoto University Hospital from 1 April, 2006 to 30 June, 2009. We assessed the indwelling duration of the UACVPs and the incidences of early and late UACVP-related complications. RESULTS: A total of 433 patients underwent subcutaneous implantation of UACVPs during this time period. The cumulative follow-up period was 251,538 catheter days, and the median duration of UACVP indwelling was 439.0 days (1-2, 24). There was no UACVP-related mortality throughout the study period. A total of 83 UACVP-related complications occurred (19.2 %), including 43 cases of infection (9.9 %, 0.17/1000 catheter days), ten cases of catheter-related thrombosis (2.3 %, 0.040/1000 catheter days), ten cases of occlusion (2.3 %, 0.040/1000 catheter days), nine cases of catheter dislocation (2.0 %, 0.036/1000 catheter days), five cases of port leakage (1.2 %, 0.019/1000 catheter days), four cases of skin dehiscence (0.9 %, 0.015/1000 catheter days) and two cases of port chamber twist (0.5 %, 0.008/1000 catheter days). The removal-free one-year port availability was estimated at 87.8 %. CONCLUSIONS: UACVPs were of long-term utility, with complication rates comparable to those of chest CVPs previously reported.

Detection of a second mesiobuccal canal in maxillary molars by swept-source optical coherence tomography.

INTRODUCTION: The purpose of this study was to investigate the ability of swept-source optical coherence tomographic (SS-OCT) imaging to detect a second mesiobuccal canal (MB2) in maxillary molars compared with visual inspection (VI) and dental operating microscopy (DOM). METHODS: Forty extracted human maxillary molars were examined. After the removal of half the crown and access cavity preparation, the existence of MB2 canals was confirmed based on cross-sectional images of each tooth obtained by micro-computed tomographic scanning as the reference standard. Then, the pulp chamber floor was scanned by SS-OCT imaging. Three dentists independently evaluated the SS-OCT images and the pulp chamber floor under VI and DOM for the presence of MB2 canals. The detection rate of MB2 canals for SS-OCT imaging, VI, and DOM was calculated, and statistical analysis was performed. RESULTS: MB2 canals existed in 19 of 40 teeth (47.5%) using micro-CT imaging. Sensitivity of DOM (0.947) was significantly higher than that of SS-OCT imaging (0.632). Specificity of SS-OCT imaging (0.714) was significantly higher than that of DOM (0.333). No statistically significant differences were found for accuracy among the 3 methods. Kappa values of SS-OCT, VI, and DOM were 0.526, 0.417, and 0.326, respectively. CONCLUSIONS: SS-OCT imaging is noninvasive, involves no ionizing radiation, and is accurate for the detection of MB2 canals.

Plasmalogens rescue neuronal cell death through an activation of AKT and ERK survival signaling.

Neuronal cells are susceptible to many stresses, which will cause the apoptosis and neurodegenerative diseases. The precise molecular mechanism behind the neuronal protection against these apoptotic stimuli is necessary for drug discovery. In the present study, we have found that plasmalogens (Pls), which are glycerophospholipids containing vinyl ether linkage at sn-1 position, can protect the neuronal cell death upon serum deprivation. Interestingly, caspse-9, but not caspase-8 and caspase-12, was cleaved upon the serum starvation in Neuro-2A cells. Pls treatments effectively reduced the activation of caspase-9. Furthermore, cellular signaling experiments showed that Pls enhanced phosphorylation of the phosphoinositide 3-kinase (PI3K)-dependent serine/threonine-specific protein kinase AKT and extracellular-signal-regulated kinases ERK1/2. PI3K/AKT inhibitor LY294002 and MAPK/ERK kinase (MEK) inhibitor U0126 treatments study clearly indicated that Pls-mediated cell survival was dependent on the activation of these kinases. In addition, Pls also inhibited primary mouse hippocampal neuronal cell death induced by nutrient deprivation, which was associated with the inhibition of caspase-9 and caspase-3 cleavages. It was reported that Pls content decreased in the brain of the Alzheimer's patients, which indicated that the reduction of Pls content could endanger neurons. The present findings, taken together, suggest that Pls have an anti-apoptotic action in the brain. Further studies on precise mechanisms of Pls-mediated protection against cell death may lead us to establish a novel therapeutic approach to cure neurodegenerative disorders.

Up-regulation of p38 mitogen-activated protein kinase during pulp injury-induced glial cell/neuronal interaction in the rat thalamus.

INTRODUCTION: We have recently reported that the signal of pulp injury induces both neuronal and glial cell activation in the contralateral thalamus in rats, although the mechanisms of the glial cell/neuronal interaction remain unclear. This study was undertaken to test our hypothesis that p38 mitogen-activated protein kinase (MAPK) signaling pathways are involved in the pulp injury-induced glial cell/neuronal interaction in the thalamus. METHODS: A local anesthetic (lidocaine with epinephrine) or saline (control) was injected into the tissue surrounding the left mandibular first molar of Wistar rats. The tooth was then pulp-exposed, and the cavity was sealed with flowable composite. After 0 (normal pulp with local anesthetic or saline pretreatment), 24, and 72 hours, the contralateral side of thalamus was retrieved and subjected to immunohistochemistry for phospho-p38 MAPK and glial fibrillary acidic protein and real-time polymerase chain reaction analysis of p38-MAPK family (MAPK 13 and MAPK 14) mRNAs. RESULTS: The area immunopositive to phospho-p38 MAPK increased until 72 hours after pulp exposure in both local anesthetic-pretreated and saline-pretreated animals, but the rate of increase was lower in the local anesthetic-pretreated animals. The density of glial fibrillary acidic protein-expressing astrocytes showed a significant increase only in the saline-pretreated animals. Expression levels of MAPK 13 and MAPK 14 mRNAs increased at 24 hours and still higher at 72 hours in the saline-pretreated animals. Notably, MAPK 13 and MAPK 14 mRNA levels at 24 and 72 hours in the local anesthetic-pretreated animals showed significantly lower levels than those in the saline-pretreated animals. CONCLUSIONS: It was concluded that pulp injury-induced up-regulation of MAPK 13, MAPK 14, and phospho-p38 MAPK in the thalamus was suppressed by the local anesthetic pretreatment, suggesting the involvement of p38 MAPK signaling pathways in the glial cell-neuronal interaction induced by pulpal nociception.

Finite element analysis of the effect of force directions on tooth movement in extraction space closure with miniscrew sliding mechanics.

INTRODUCTION: Miniscrews placed in bone have been used as orthodontic anchorage in extraction space closure with sliding mechanics. The movement patterns of the teeth depend on the force directions. To move the teeth in a desired pattern, the appropriate direction of force must be selected. The purpose of this article is to clarify the relationship between force directions and movement patterns. METHODS: By using the finite element method, orthodontic movements were simulated based on the remodeling law of the alveolar bone. The power arm length and the miniscrew position were varied to change the force directions. RESULTS: When the power arm was lengthened, rotation of the entire maxillary dentition decreased. The posterior teeth were effective for preventing rotation of the anterior teeth through an archwire. In cases of a high position of a miniscrew, bodily tooth movement was almost achieved. The vertical component of the force produced intrusion or extrusion of the entire dentition. CONCLUSIONS: Within the limits of the method, the mechanical simulations demonstrated the effect of force direction on movement patterns.

The role of N-methyl-D-aspartate receptor subunits in the rat thalamic mediodorsal nucleus during central sensitization.

We have identified tooth pulp-driven neurons (TPDNs) in the thalamic mediodorsal nucleus (MD) in rats and showed that the TPDNs' responsiveness in the MD is increased by chemical conditioning stimulation of allyl-isothiocyanate (mustard oil) to the molar tooth pulp. The aim of the present study was to address the role of N-methyl-d-aspartate receptors (NMDA receptors) in the sensitized central nervous system following the mustard oil application to the rat tooth pulp. Microinjection of MK-801, a noncompetitive NMDA receptor antagonist, to the thalamic MD nucleus reduced the TPDNs' responsiveness in the thalamic MD nucleus. Gene expression analysis showed that expression levels of NMDA receptor subunits NR2A and NR2D mRNAs in the thalamus were increased by the mustard oil application and that the increases were reduced by MK-801. When naloxone, an opioid receptor antagonist, was given systemically following the MK801 microinjection, the TPDNs' responsiveness was rekindled and expression levels of NR2D and NR2A mRNAs were increased. Moreover, lidocaine pretreatment abolished the mustard oil-induced upregulation of NR2D and NR2A mRNAs. These results suggest that, during central sensitization, interaction of NMDA receptors and endogeneous opioid-related inhibitory mechanisms plays critical role in the alteration of the TPDNs' responsiveness in the thalamic MD nucleus.

Increased gene expression of Toll-like receptors and antigen-presenting cell-related molecules in the onset of experimentally induced furcation lesions of endodontic origin in rat molars.

INTRODUCTION: Early immunopathogenic mechanisms behind pulp infection-induced furcal inflammation have not been well understood. To address the immunopathology of the pulp infection-induced furcal region of the periodontal ligament (PDL), we performed immunohistochemical and quantitative gene expression analyses for toll-like receptors (TLRs) in the furcal PDL of rat molars subjected to unsealed or sealed pulpotomy. METHODS: Furcal inflammation in rat molars was generated by making unsealed pulpotomies that were exposed to the oral environment for 24 hours. Pulpotomized teeth sealed with a temporary filling material and untreated normal teeth served as controls. Gene expression was analyzed with laser capture real-time polymerase chain reaction for TLR-2, TLR-4, and antigen presenting cell (APC)-related molecules (class II MHC, CD83, and CD86). Immunohistochemistry for TLR-2 and TLR-4 was also performed. RESULTS: Messenger RNA expression levels of TLRs and the APC-related molecules in the furcal periodontal ligament were significantly up-regulated in teeth with unsealed pulpotomy. Immunohistochemistry for unsealed pulpotomized teeth revealed that TLRs-expressing cells were predominantly distributed within the PDL beneath the furcal dentin. CONCLUSIONS: These results suggested the involvement of innate immune mechanisms involving TLRs and resulting activation of APCs in the early pathogenesis of pulp infection-induced furcal inflammation.