Hydrogen-induced Sulfur Vacancies on the MoS2 Basal Plane Studied by Ambient Pressure XPS and DFT Calculations.

Sulfur vacancy on an MoS2 basal plane plays a crucial role in device performance and catalytic activity; thus, an understanding of the electronic states of sulfur vacancies is still an important issue. We investigate the electronic states on an MoS2 basal plane by ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and density functional theory calculations while heating the system in hydrogen. The AP-XPS results show a decrease in the intensity ratio of S 2p to Mo 3d, indicating that sulfur vacancies are formed. Furthermore, low-energy components are observed in Mo 3d and S 2p spectra. To understand the changes in the electronic states induced by sulfur vacancy formation at the atomic scale, we calculate the core-level binding energies for the model vacancy surfaces. The calculated shifts for Mo 3d and S 2p with the formation of sulfur vacancy are consistent with the experimentally observed binding energy shifts. Mulliken charge analysis indicates that this is caused by an increase in the electronic density associated with the Mo and S atoms around the sulfur vacancy as compared to the pristine surface. The present investigation provides a guideline for sulfur vacancy engineering.

Elucidation of the atomic-scale processes of dissociative adsorption and spillover of hydrogen on the single atom alloy catalyst Pd/Cu(111).

Hydrogen spillover is a crucial process in the selective hydrogenation reactions on Pd/Cu single atom alloy catalysts. In this study, we report the atomic-scale perspective of these processes on the single atom alloy catalyst Pd/Cu(111) based on the experimental and theoretical results, including infrared reflection absorption spectroscopy (IRAS), temperature programmed desorption (TPD), high-resolution X-ray photoelectron spectroscopy (HR-XPS), and density functional theory (DFT) calculations for core-level excitation. The hydrogen spillover onto Cu(111) was successfully observed in real time using time-resolved IRAS measurements at 80 K. The chemical shifts of Pd 3d5/2 indicate that H2 is dissociated and adsorbed at the Pd site. In addition, a "two-step" chemical shift of the Pd 3d5/2 binding energy was observed, indicating two types of hydrogen adsorption states at the Pd site. The proposed mechanism of the hydrogen dissociation and spillover processes is as follows: (i) a hydrogen molecule is dissociated at a Pd site, and the hydrogen atoms are adsorbed on the Pd site; (ii) the number of hydrogen atoms on the Pd site increases up to three; and (iii) the hydrogen atoms will spill over onto the Cu surface.

Linear Trimer Molecule Formation by Three-Center-Four-Electron Bonding in a Crystalline Solid RuP.

Some inorganic solids undergo phase transitions that result in the formation of "molecules" in their crystalline frameworks, which are frequently accompanied by dramatic changes in physical properties; the metal-insulator transition (MIT) in vanadium dioxide, for instance, is accompanied by the formation of dimer molecules with conventional two-center-two-electron bonding. We have discovered the creation of a linear ruthenium trimer with atypical three-center-four-electron bonding in ruthenium monophosphide at its MIT. Our detailed structural investigation and electronic structure calculations reveal that charge transfer from polymerized phosphorous to ruthenium automatically tunes the electron density to precisely four per trimer at the MIT, with all conduction electrons present at high temperatures being trapped by the trimer's molecular orbitals at low temperatures. Our results demonstrate that molecules are essential even in solid crystals, as they impact their electronic properties.

The Simplest Model for Doped Poly(3,4-ethylenedioxythiophene) (PEDOT): Single-crystalline EDOT Dimer Radical Cation Salts.

Invited for the cover of this issue is the group of Tomoko Fujino and Hatsumi Mori at the University of Tokyo. The image depicts the structural information of doped PEDOT uncovered by the single-crystalline EDOT dimer model. Read the full text of the article at .10.1002/chem.202005333.

Diverse densest binary sphere packings and phase diagram.

We revisit the densest binary sphere packings (DBSPs) under periodic boundary conditions and present an updated phase diagram, including newly found 12 putative densest structures over the x-α plane, where x is the relative concentration and α is the radius ratio of the small and large spheres. To efficiently explore the DBSPs, we develop an unbiased random search approach based on both the piling-up method to generate initial structures in an unbiased way and the iterative balance method to optimize the volume of a unit cell while keeping the overlap of hard spheres minimized. With those two methods, we have discovered 12 putative DBSPs and thereby the phase diagram is updated, while our results are consistent with those of a previous study [Hopkins et al., Phys. Rev. E 85, 021130 (2012)]PLEEE81539-375510.1103/PhysRevE.85.021130 with a small correction for the case of 12 or fewer spheres in the unit cell. Five of the discovered 12 DBSPs are identified in the small radius range of 0.42≤α≤0.50, where several structures are competitive to each other with respect to packing fraction. Through the exhaustive search, diverse dense packings are discovered and, accordingly, we find that packing structures achieve high packing fractions by introducing distortion and/or combining a few local dense structural units. Furthermore, we investigate the correspondence of the DBSPs with crystals based on the space group. The result shows that many structural units in real crystals, e.g., LaH_{10} and SrGe_{2-δ} being high-pressure phases, can be understood as DBSPs. The correspondence implies that the densest sphere packings can be used effectively as structural prototypes for searching complex crystal structures, especially for high-pressure phases.

The Simplest Model for Doped Poly(3,4-ethylenedioxythiophene) (PEDOT): Single-crystalline EDOT Dimer Radical Cation Salts.

Although doped poly(3,4-ethylenedioxythiophene) (PEDOT) is extensively used in electronic devices, their molecular-weight distributions and inadequately defined structures have hindered the elucidation of their underlying conduction mechanism. In this study, we introduce the simplest discrete oligomer models: EDOT dimer radical cation salts. Single-crystal structural analyses revealed their one-dimensional (1D) columnar structures, in which the donors were uniformly stacked. Band calculations identified 1D metallic band structures with a strong intracolumnar orbital interaction (band width W≈1 eV), implying the origin of the high conductivity of doped PEDOT. Interestingly, the salts exhibited semiconducting behavior reminiscent of genuine Mott states as a result of electron-electron repulsion (U) dominant over W. This study realized basic models with tunable W and U to understand the conduction mechanism of doped PEDOT through structural modification in oligomers, including the conjugation length.

Anisotropic Triangular Lattice Realized in Rhenium Oxychlorides A3ReO5Cl2 (A = Ba, Sr).

We report the synthesis, crystal structure, and magnetic properties of the two new quantum antiferromagnets A3ReO5Cl2 (A = Sr, Ba). The crystal structure is isostructural with the mineral pinalite Pb3WO5Cl2, in which the Re6+ ion is square pyramidally coordinated by five oxide atoms and forms an anisotropic triangular lattice (ATL) made of S = 1/2 spins. The magnetic interactions J and J' in the ATL are estimated from magnetic susceptibilities to be 19.5 (44.9) and 9.2 (19.3) K, respectively, with J'/J = 0.47 (0.43) for A = Ba (Sr). For each compound, the heat capacity at low temperatures shows a large T-linear component with no signature of long-range magnetic order above 2 K, which suggests a gapless spin liquid state of one-dimensional character of the J chains in spite of the significantly large J' couplings. This is a consequence of one-dimensionalization by geometrical frustration in the ATL magnet; a similar phenomenon has been observed in two compounds with slightly smaller J'/J values: Cs2CuCl4 (J'/J = 0.3) and the related compound Ca3ReO5Cl2 (0.32). Our findings demonstrate that 5d mixed-anion compounds provide a unique opportunity to explore novel quantum magnetism.

Possible Kitaev Quantum Spin Liquid State in 2D Materials with S=3/2.

Quantum spin liquids (QSLs) form an extremely unusual magnetic state in which the spins are highly correlated and fluctuate coherently down to the lowest temperatures, but without symmetry breaking and without the formation of any static long-range-ordered magnetism. Such intriguing phenomena are not only of great fundamental relevance in themselves, but also hold promise for quantum computing and quantum information. Among different types of QSLs, the exactly solvable Kitaev model is attracting much attention, with most proposed candidate materials, e.g., RuCl_{3} and Na_{2}IrO_{3}, having an effective S=1/2 spin value. Here, via extensive first-principles-based simulations, we report the investigation of the Kitaev physics and possible Kitaev QSL state in epitaxially strained Cr-based monolayers, such as CrSiTe_{3}, that rather possess a S=3/2 spin value. Our study thus extends the playground of Kitaev physics and QSLs to 3d transition metal compounds.

"Visible" 5d Orbital States in a Pleochroic Oxychloride.

Transition metal compounds sometimes exhibit attractive colors. Here, we report a new oxychloride, Ca3ReO5Cl2, that shows unusually distinct pleochroism; that is, the material exhibits different colors depending on the viewing direction. This pleochroism is a consequence of the coincidental complex crystal field splitting of the 5d orbitals of the Re6+ ion in a square-pyramidal coordination of low symmetry in the energy range of the visible spectrum. Since the relevant d-d transitions show characteristic polarization dependence according to the optical selection rule, the orbital states are "visible" in Ca3ReO5Cl2.

Dirac Fermions in Borophene.

Honeycomb structures of group IV elements can host massless Dirac fermions with nontrivial Berry phases. Their potential for electronic applications has attracted great interest and spurred a broad search for new Dirac materials especially in monolayer structures. We present a detailed investigation of the ß_{12} sheet, which is a borophene structure that can form spontaneously on a Ag(111) surface. Our tight-binding analysis revealed that the lattice of the ß_{12} sheet could be decomposed into two triangular sublattices in a way similar to that for a honeycomb lattice, thereby hosting Dirac cones. Furthermore, each Dirac cone could be split by introducing periodic perturbations representing overlayer-substrate interactions. These unusual electronic structures were confirmed by angle-resolved photoemission spectroscopy and validated by first-principles calculations. Our results suggest monolayer boron as a new platform for realizing novel high-speed low-dissipation devices.

Effects of adenosine 5'-monophosphate on epidermal turnover.

The structure and function of the epidermis is maintained by cell renewal based on epidermal turnover. Epidermal turnover is delayed by aging, and it is thought that the delay of the epidermal turnover is a cause of aging alternation of skin. The epidermal turnover is related to the energy metabolism of epidermal basal cells. Adenosine 5'-triphosphate (ATP) is needed for cell renewal: cell division, and adenosine 5'-monophosphate (AMP) increases the amount of intracellular ATP. These findings suggest that AMP accelerates the epidermal turnover delayed by aging. This study investigated whether AMP and adenosine 5'-monophosphate disodium salt (AMP2Na) accelerates the epidermal turnover. An effect of AMP2Na on cell proliferation was examined by our counting of keratinocytes. An effect of AMP2Na on cell cycle was examined by our counting of basal cells in DNA synthetic period of hairless rats. The effects of AMP2Na (or AMP) on the epidermal turnover were examined by our measuring stratum corneum transit time by use of guinea pigs, and by our measuring stratum corneum surface area by use of hairless rats and in a clinical pharmacological study. The AMP2Na showed two different profiles on the proliferation of primary cultured keratinocytes. At a low concentration it induced cell growth, whereas at a high concentration it inhibited cell growth. The number of basal cells in the DNA synthetic period of AMP2Na was significantly higher than that of the vehicle in hairless rats. The stratum corneum transit time of AMP2Na was significantly shorter than that of the vehicle in guinea pigs. The corneocyte surface area of emulsion containing AMP2Na was significantly smaller than that of the vehicle in volunteers. We conclude that AMP promotes the cell proliferation and the cell cycle progression of epidermal basal cells and accelerates epidermal turnover safely. In addition, AMP is useful for skin rejuvenation in dermatology and aesthetic dermatology.