ABSTRACT
The use of thin magnetostrictive patches to generate and detect guided waves within the composite samples is investigated for defect detection. This approach has been implemented using SH0 shear horizontal guided waves in both CFRP and GFRP plates. A magnetostrictive patch transducer was able to generate SH0 waves with known directional characteristics. The synthetic aperture focusing technique (SAFT) was then used to reconstruct images of defects using multiple transmission and detection locations. The results for imaging defects in both types of material are presented.
Subject(s)
Diagnostic Imaging , TransducersABSTRACT
A set of experiments was designed and conducted to investigate the vibrational ultrasonic response of a thin magnetostrictive patch bonded to a glass plate, with changes in static and dynamic magnetic fields applied to the patch. Such arrangements are often used as a means of generating guided waves in pipes or plates, by attaching a patch to a sample's surface. The effect of varying the applied static and dynamic magnetic field's amplitudes and directions and the frequency of the dynamic magnetic field was studied. It was demonstrated that the vibration of the magnetostrictive patch could be controlled and enhanced by optimizing the magnetic fields. It was also shown that for low-amplitude dynamic magnetic fields, Lorentz forces generated within the patch and the resonant frequency of the patch could also contribute to the enhancement of the vibration of the patch for low-amplitude fields. For high-amplitude dynamic magnetic fields, the magnetostriction effect can be the main transduction mechanism, which can be optimized for non-destructive testing and inspection purposes.
ABSTRACT
The analysis and design of a novel flexible dielectric sensor, which can be integrated into a composite materials manufacturing process to measure the resin frontal flow, is presented in this paper. The proposed sensor consists of two parallel line electrodes and a ground plane covered by a dielectric material. The analytical description and the electrostatic modelling were considered for the design of the sensor and to enhance the understanding of the response of the sensor to the resin impregnation of a carbon fabric during the infusion phase. The optimization of the sensor's response and the increase of its sensitivity with regards to the geometric characteristics and the materials used were the main objectives of this study. An experimental set-up for the vacuum infusion process which includes the proposed sensor was used to measure the capacitance and validate the derived resin flow against visual measurements. The results indicate that the sensor can provide information on the resin frontal flow within 2% accuracy against visual measurements, which make this technology promising for monitoring the liquid resin infusion processes.
