ABSTRACT
We report a self-induced spatially-coherent dot array consisting of fourteen units of vertical-cavity surface-emitting modes that exhibit spatially uniform spectra. A 47.5 µm total beam width and 0.5° narrow emission are achieved using an oblong cavity enclosed with a flat top mirror, cylindrically curved bottom mirror, and side facet. Notably, terminating the side of the cavity with a perpendicular facet enhances the horizontal propagation, which couples with the vertical resonance in each dot, similar to the case of master lasers in injection-locked lasers that delocalize the modes. Conventional semiconductor lasers, edge-emitting lasers, and vertical-cavity surface-emitting lasers have a Fabry-Pérot cavity; furthermore, emission and resonance are in identical directions, limiting the beam width to micrometers. Though the present structure has the same scheme of propagation, the right-angled facet synchronizes the modes and drastically expands the beam width.
ABSTRACT
The electrical and optical improvements of AlGaInP micro-light-emitting diodes (µLEDs) using atomic-layer deposition (ALD) sidewall passivation were demonstrated. Due to the high surface recombination velocity and minority carrier diffusion length of the AlGaInP material system, devices without sidewall passivation suffered from high leakage and severe drop in external quantum efficiency (EQE). By employing ALD sidewall treatments, the 20×20 µm2 µLEDs resulted in greater light output power, size-independent leakage current density, and lower ideality factor. The forward current-voltage characteristic was enhanced by using surface pretreatment. Furthermore, ALD sidewall treatments recovered the EQE of the 20×20 µm2 devices more than 150%. This indicated that AlGaInP µLEDs with ALD sidewall treatments can be used as the red emitter for full-color µLED display applications.
ABSTRACT
We successfully demonstrated an electrically injected blue(202¯1¯)semipolar vertical-cavity surface-emitting laser with a 5λ cavity length, an ion implanted aperture, and a dual dielectric DBR design. The peak power under pulsed operation was 1.85 mW, the threshold current was 4.6 kA/cm2 , and the differential efficiency was 2.4% for the mode at 445 nm of a device with a 12 µm aperture. Lasing was achieved up to a 50% duty cycle and the thermal impedance was estimated to be 1800 K/W. The lasing emission was found to be 100% plane polarized along the a-direction.
