Bio-Based Polyurethane Networks Containing Sunflower Oil Based Polyols.

This work focused on the preparation and investigation of polyurethane (SO-PU)-containing sunflower oil glycerides. By transesterification of sunflower oil with glycerol, we synthesized a glyceride mixture with an equilibrium composition, which was used as a new diol component in polyurethanes in addition to poly(ε-caprolactone)diol (PCLD2000). The structure of the glyceride mixture was characterized by physicochemical methods, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), nuclear magnetic resonance spectroscopy (NMR), and size exclusion chromatography (SEC) measurements. The synthesis of polyurethanes was performed in two steps: first the prepolymer with the isocyanate end was synthesized, followed by crosslinking with an additional amount of diisocyanate. For the synthesis of the prepolymer, 4,4'-methylene diphenyl diisocyanate (MDI) or 1,6-hexamethylene diisocyanate (HDI) were used as isocyanate components, while the crosslinking was carried out using an additional amount of MDI or HDI. The obtained SO-PU flexible polymer films were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The so-obtained flexible SO-PU films were proved to be suitable for the preparation of potentially biocompatible and/or biodegradable scaffolds. In addition, the stress versus strain curves for the SO-PU polymers were interpreted in terms of a mechanical model, taking into account the yield and the strain hardening.

Synthesis and Application of Robust Spiro [Fluorene­9] CAAC Ruthenium Alkylidene Complexes for the "One-Pot" Conversion of Allyl Acetate to Butane-1,4-diol.

A series of a novel CAAC ligands featuring a spiro-fluorene group have been synthesized and complexed with ruthenium alkylidenes, yielding the corresponding Hoveyda-type derivatives as a new family of olefin metathesis catalysts. The novel complexes have been characterized by XRD, HRMS and NMR measurements. The synthetized complexes were tested in catalysis and showed good activity in olefin metathesis, as demonstrated on diethyl diallylmalonate and allyl acetate substrates. The unique backbone in the ligand system with the large, yet inflexible condensed system renders interesting properties to the catalyst, exemplified by the good catalytic performance and improved Z­selectivity. In addition, the complex can also serve as a hydrogenation catalyst in a consecutive (one-pot) reaction. The latter reaction can convert allyl acetate to butane­1,4­diol, a valuable chemical intermediate for biodegradable polybutylene succinate (PBS).

"Inverted" Cyclic(Alkyl)(Amino)Carbene (CAAC) Ruthenium Complex Catalyzed Isomerization Metathesis (ISOMET) of Long Chain Olefins to Propylene at Low Ethylene Pressure.

Isomerization Metathesis (ISOMET) reaction is an emerging tool for "open loop" chemical recycling of polyethylene to propylene. Novel, latent N-Alkyl substituted Cyclic(Alkyl)(Amino)Carbene (CAAC)-ruthenium catalysts (5a-Ru, 3b-Ru - 6c-Ru) are developed rendering "inverted" chemical structure while showing enhanced ISOMET activity in combination with (RuHCl)(CO)(PPh3)3 (RuH) double bond isomerization co-catalyst. Systematic investigations reveal that the steric hindrance of the substituents on nitrogen and carbon atom adjacent to carbene moiety in the CAAC ligand have significantly improved the catalytic activity and robustness. In contrast to the NHC-Ru and CAAC-Ru catalyst systems known so far, these systems show higher isomerization metathesis (ISOMET) activity (TON: 7400) on the model compound 1-octadecene at as low as 3.0 bar optimized pressure, using technical grade (3.0) ethylene. The propylene content formed in the gas phase can reach up to 20% by volume.

Block Synthesis and Step-Growth Polymerization of C-6-Sulfonatomethyl-Containing Sulfated Malto-Oligosaccharides and Their Biological Profiling.

Highly sulfated malto-oligomers, similar to heparin and heparan-sulfate, have good antiviral, antimetastatic, anti-inflammatory and cell growth inhibitory effects. Due to their broad biological activities and simple structure, sulfated malto-oligomer derivatives have a great therapeutic potential, therefore, the development of efficient synthesis methods for their production is of utmost importance. In this work, preparation of α-(1→4)-linked oligoglucosides containing a sulfonatomethyl moiety at position C-6 of each glucose unit was studied by different approaches. Malto-oligomeric sulfonic acid derivatives up to dodecasaccharides were prepared by polymerization using different protecting groups, and the composition of the product mixtures was analyzed by MALDI-MS methods and size-exclusion chromatography. Synthesis of lower oligomers was also accomplished by stepwise and block synthetic methods, and then the oligosaccharide products were persulfated. The antiviral, anti-inflammatory and cell growth inhibitory activity of the fully sulfated malto-oligosaccharide sulfonic acids were determined by in vitro tests. Four tested di- and trisaccharide sulfonic acids effectively inhibited the activation of the TNF-α-mediated inflammatory pathway without showing cytotoxicity.

Formulation and Investigation of CK2 Inhibitor-Loaded Alginate Microbeads with Different Excipients.

The aim of this study was to formulate and characterize CK2 inhibitor-loaded alginate microbeads via the polymerization method. Different excipients were used in the formulation to improve the penetration of an active agent and to stabilize our preparations. Transcutol® HP was added to the drug-sodium alginate mixture and polyvinylpyrrolidone (PVP) was added to the hardening solution, alone and in combination. To characterize the formulations, mean particle size, scanning electron microscopy analysis, encapsulation efficiency, swelling behavior, an enzymatic stability test and an in vitro dissolution study were performed. The cell viability assay and permeability test were also carried out on the Caco-2 cell line. The anti-oxidant and anti-inflammatory effects of the formulations were finally evaluated. The combination of Transcutol® HP and PVP in the formulation of sodium alginate microbeads could improve the stability, in vitro permeability, anti-oxidant and anti-inflammatory effects of the CK2 inhibitor.

Molecular data storage using direct analysis in real time (DART) ionization mass spectrometry for decoding.

Molecular data storage is becoming a viable alternative to traditional information storage systems. Here, we propose a method where the presence or absence of a given molecule in a mixture of compounds represents a bit of information. As a novel approach, direct analysis in real time (DART) ionization mass spectrometry is used to recover and decode the information stored at the molecular level. Nicotinic acid derivatives were synthesized and used as the 'bit compounds'. Their volatility and ease of ionization make these molecules especially suitable for DART-MS detection. The application of DART-MS as a method with an ambient ionization technique, enables the re-reading of digital chemical codes embedded in the material of ordinary objects. Our method is designed to store and read back short pieces of digital information, up to several hundred bits. These codes can have the function of barcodes or QR codes, as shown in our proof-of-principle applications. First, modelling a QR code as a link to our university's website, three solutions were prepared, each representing 22 bits. Proceeding further, the bit compounds were incorporated into a polymer matrix that is suitable for 3D printing, and a toy ship was created with a hidden barcode. In addition, decoding software was developed to process the DART-MS spectra. The nicotinic acid components representing the bits dominated the DART-MS spectra and error-free decoding was achieved.

Bisphenol A Diglycidyl Ether-Primary Amine Cooligomer-poly(ε-caprolactone) Networks: Synthesis and Characterization.

In this work, the preparation and systematic investigation of cross-linked polyurethane-epoxy (PU-EP) polymer systems are reported. The PU-EP polymers were prepared using a reaction of isocyanate (NCO)-terminated PU-prepolymer with diglycidyl ether of bisphenol A (DGEBA)-amine cooligomer. The oligomerization of DGEBA was carried out by adding furfurylamine (FA) or ethanolamine (EA), resulting in DGEBA-amine cooligomers. For the synthesis of NCO-terminated PU-prepolymer, poly(ε-caprolactone)diol (PCD) (Mn = 2 kg/mol) and 1,6-hexamethylene diisocyanate (HDI) were used. The cross-linking was achieved by adding DGEBA-amine cooligomer to PU-prepolymer, in which the obtained urethane bonds, due to the presence of free hydroxil groups in the activated DGEBA, served as netpoints. During cross-linking, ethanolamine provides an additional free hydroxyl group for the formation of a new urethane bond, while furfurylamine can serve as a thermoreversible coupling element (e.g., Diels-Alder adduct). The PU-EP networks were characterized using attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and scanning electron microscopy (SEM). The DMA curves of some PU-EPs (depending on the compositions and the synthetic method) revealed a plateau-like region above the melting temperature (Tm) of PCD, confirming the presence of a cross-linked structure. This property resulted in a shape memory (SM) behavior for these samples, which can be fine-tuned in the presence of furfurylamine through the formation of additional thermoreversible bonds (e.g., Diels-Alder adduct).

Enhanced Copolymer Characterization for Polyethers Using Gel Permeation Chromatography Combined with Artificial Neural Networks.

Gel permeation chromatography (GPC) is a generally applied method for the mass analysis of various polymers and copolymers, but it inherently fails to provide additional important information such as the composition of copolymers. However, we will show that GPC measurements using different solvents can yield not just the correct molecular weight but the composition of the copolymer. Accordingly, artificial neural networks (ANNs) have been developed to process the data of GPC measurements and determine the molecular weight and the chemical composition of the copolymers. The target values of the ANNs were obtained by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and nuclear magnetic resonance (NMR) spectroscopy. Our GPC-ANN method is demonstrated by the analysis of various poloxamers, i.e., poly(ethylene oxide) (PEO)-poly(propylene oxide) (PPO) block copolymers. Two ANNs were constructed. The first one (ANN_1) works in a wider mass range (from 900 to 12,500 dalton), while the second one (ANN_2) produces more output values. ANN_2 can thus predict seven characteristic copolymer parameters, namely, two average molecular weights, the average weight fraction of the EO unit, and four average numbers of the repeat units. The correlation between the experimentally obtained outputs and the predicted ones is high (r > 0.98). The accuracy of the ANNs is very convincing, and both ANNs predict the number-average molecular weight (Mn) with an accuracy below 5%. Furthermore, this work is the first step for creating an open database and applications extending the use of the GPC-ANN method for the analysis of copolymers.

Microcystin-LR, a Cyanobacterial Toxin, Induces Changes in the Organization of Membrane Compartments in Arabidopsis.

To evaluate the effects of the cyanobacterial toxin microcystin-LR (MCY-LR, a protein phosphatase inhibitor) and diquat (DQ, an oxidative stress inducer) on the organization of tonoplast, the effect of MCY-LR on plastid stromule formation and on mitochondria was investigated in wild-type Arabidopsis. Tonoplast was also studied in PP2A catalytic (c3c4) and regulatory subunit mutants (fass-5 and fass-15). These novel studies were performed by CLSM microscopy. MCY-LR is produced during cyanobacterial blooms. The organization of tonoplast of PP2A mutants of Arabidopsis is much more sensitive to MCY-LR and DQ treatments than that of wild type. In c3c4, fass-5 and fass-15, control and treated plants showed increased vacuole fragmentation that was the strongest when the fass-5 mutant was treated with MCY-LR. It is assumed that both PP2A/C and B" subunits play an important role in normal formation and function of the tonoplast. In wild-type plants, MCY-LR affects mitochondria. Under the influence of MCY-LR, small, round-shaped mitochondria appeared, while long/fused mitochondria were typical in control plants. Presumably, MCY-LR either inhibits the fusion of mitochondria or induces fission. Consequently, PP2A also plays an important role in the fusion of mitochondria. MCY-LR also increased the frequency of stromules appearing on chloroplasts after 1 h treatments. Along the stromules, signals can be transported between plastids and endoplasmic reticulum. It is probable that they promote a faster response to stress.

Investigation of oxidative stress in patients with multifocal motor neuropathy.

Background and purpose: Multifocal motor neuropathy (MMN) is a rare, immune-mediated illness attacking ex-clusively motor nerves. It is known that oxidative stress is present in peripheral neuropathies, but it has not been investigated MMN. Methods: We measured in our prospective study the L-arginine, symmetric and asymmetric dimethylarginine (SDMA, ADMA) serum concentrations of 10 patients and 10 controls before and after intravenous immunoglobulin treatment (IVIG), as markers of the L-arginine/NO pathway involved in chronic inflammation and oxidative stress. The functions of motor nerves were tested in all patients and the serum antiganglioside antibody levels were de-tec-ted, as well. Results: MMN patients showed significantly higher ADMA (p = 0.0048; 0.98 and 0.63, respectively) and SDMA le-vels (p = 0.001; 0.88 and 0.51, respectively) than healthy controls, while L-arginine was not different. Controlling for the covariant age, ADMA (B = -0.474; p = 0.041) or SDMA (B = -0.896; p < 0.0005) serum levels proved to be the significant predictors of the presence of MMN. IVIG therapy decreased significantly ADMA concentrations (p = 0.025; 0.98 and 0.84, respectively) and showed a trend to reduce SDMA levels (p = 0.1; 0.88 and 0.74, respectively). The dimethylamine levels did not correlate with the number of affected nerves, disease duration, or the presence of ganglioside antibodies. The conduction block-related peripheral motor dysfunction improved right after the IVIG treatment. Conclusion: Dimethylamine levels are elevated in the serum and are responsive to IVIG therapy in MMN. These findings support the presence of oxidative stress in MMN.

Flexible Investment Casting Wax Patterns for 3D-Printing: Their Rheological and Mechanical Characterizations.

The mechanical and rheological characterizations of flexible investment casting patterns capable of 3D printing are reported. The wax pattern was composed of microcrystalline hydrocarbon wax (DMW7478), Piccotex 75 (a copolymer of α-methyl-styrene and vinyl toluene with a 75/25 molar ratio, respectively) and Escorene (a copolymer of ethylene and vinyl acetate with a 72/28 mass ratio, respectively). It was found that in order to obtain a wax pattern with appreciable mechanical properties, the content of the microcrystalline hydrocarbon wax in these blends should not exceed 30% (m/m). Thus, a series of patterns with 28% (m/m) wax and varying Piccotex and Escorene contents spanning from 0 to 72% (m/m) was prepared. The dependence of the dynamic viscosities of the wax patterns on the composition was described using a stretched exponential model, whereas their variations with the temperature were interpreted in terms of the Arrhenius-Guzman equation. Furthermore, the slopes of the lines fitted to the viscosity versus temperature curves at the pour point decreased linearly with the Piccotex content. Non-Newtonian changes in the shear stress with the shear rate and shear stress crystallization were observed at temperatures near the pour points. The mechanical properties were evaluated using the uniaxial tensile mode and by three-point bending experiments. It was found that the stress (σ) versus the relative elongation (ε) curves can effectively be rendered by means of the standard linear solid (SLS) viscoelastic model. In addition, it was also established that the Young's modulus varied according to a sigmoid-type curve with the piccotex content, while the yield stress decreased linearly with the concentration of Piccotex. In addition, based on the spooling suitability and printability, the patterns were rated and it was found that the most appropriate wax pattern compositions for 3D printing were those which contained 30% (m/m) and 35% (m/m) Piccotex.

Potential Original Drug for Aspergillosis: In Vitro and In Vivo Effects of 1-N,N-Dimethylamino-5-Isocyanonaphthalene (DIMICAN) on Aspergillus fumigatus.

As the recent outbreak of coronavirus disease 2019 (COVID-19) has shown, viral infections are prone to secondary complications like invasive aspergillosis with a high mortality rate, and therefore the development of novel, effective antifungals is of paramount importance. We have previously demonstrated that 1-amino-5-isocyanonaphthalene (ICAN) derivatives are promising original drug candidates against Candida strains (Patent pending), even against fluconazole resistant C. albicans. Consequently, in this study ICANs were tested on Aspergillus fumigatus, an opportunistic pathogen, which is the leading cause of invasive and systematic pulmonary aspergillosis in immunosuppressed, transplanted and cancer- or COVID-19 treated patients. We have tested several N-alkylated ICANs, a well as 1,5-naphthalene-diisocyanide (DIN) with the microdilution method against Aspergillus fumigatus strains. The results revealed that the diisocyanide (DIN) was the most effective with a minimum inhibitory concentration (MIC) value as low as 0.6 µg mL-1 (3.4 µM); however, its practical applicability is limited by its poor water solubility, which needs to be overcome by proper formulation. The other alkylated derivatives also have in vitro and in vivo anti-Aspergillus fumigatus effects. For animal experiments the second most effective derivative 1-N, N-dimethylamino-5-isocyanonaphthalene (DIMICAN, MIC: 7-8 µg mL-1, 36-41 µM) was selected, toxicity tests were made with mice, and then the antifungal effect of DIMICAN was tested in a neutropenic aspergillosis murine model. Compared to amphotericin B (AMB), a well-known antifungal, the antifungal effect of DIMICAN in vivo turned out to be much better (40% vs. 90% survival after eight days), indicating its potential as a clinical drug candidate.

Multiple mechanisms contribute to fluorometry signals from the voltage-gated proton channel.

Voltage-clamp fluorometry (VCF) supplies information about the conformational changes of voltage-gated proteins. Changes in the fluorescence intensity of the dye attached to a part of the protein that undergoes a conformational rearrangement upon the alteration of the membrane potential by electrodes constitute the signal. The VCF signal is generated by quenching and dequenching of the fluorescence as the dye traverses various local environments. Here we studied the VCF signal generation, using the Hv1 voltage-gated proton channel as a tool, which shares a similar voltage-sensor structure with voltage-gated ion channels but lacks an ion-conducting pore. Using mutagenesis and lipids added to the extracellular solution we found that the signal is generated by the combined effects of lipids during movement of the dye relative to the plane of the membrane and by quenching amino acids. Our 3-state model recapitulates the VCF signals of the various mutants and is compatible with the accepted model of two major voltage-sensor movements.

Semisynthetic teicoplanin derivatives with dual antimicrobial activity against SARS-CoV-2 and multiresistant bacteria.

Patients infected with SARS-CoV-2 risk co-infection with Gram-positive bacteria, which severely affects their prognosis. Antimicrobial drugs with dual antiviral and antibacterial activity would be very useful in this setting. Although glycopeptide antibiotics are well-known as strong antibacterial drugs, some of them are also active against RNA viruses like SARS-CoV-2. It has been shown that the antiviral and antibacterial efficacy can be enhanced by synthetic modifications. We here report the synthesis and biological evaluation of seven derivatives of teicoplanin bearing hydrophobic or superbasic side chain. All but one teicoplanin derivatives were effective in inhibiting SARS-CoV-2 replication in VeroE6 cells. One lipophilic and three perfluoroalkyl conjugates showed activity against SARS-CoV-2 in human Calu-3 cells and against HCoV-229E, an endemic human coronavirus, in HEL cells. Pseudovirus entry and enzyme inhibition assays established that the teicoplanin derivatives efficiently prevent the cathepsin-mediated endosomal entry of SARS-CoV-2, with some compounds inhibiting also the TMPRSS2-mediated surface entry route. The teicoplanin derivatives showed good to excellent activity against Gram-positive bacteria resistant to all approved glycopeptide antibiotics, due to their ability to dually bind to the bacterial membrane and cell-wall. To conclude, we identified three perfluoralkyl and one monoguanidine analog of teicoplanin as dual inhibitors of Gram-positive bacteria and SARS-CoV-2.

Isocyanonaphthol Derivatives: Excited-State Proton Transfer and Solvatochromic Properties.

Fluorescent probes that exhibit solvatochromic or excited-state proton-transfer (ESPT) properties are essential tools for the study of complex biological or chemical systems. Herein, the synthesis and characterization of a novel fluorophore that reveals both features, 5-isocyanonaphthalene-1-ol (ICOL), are reported. Various solvatochromic methods, such as Lippert−Mataga and Bilot−Kawski, together with time-dependent density functional theory (TD-DFT) and time-resolved emission spectroscopy (TRES), were applied to gain insights into its excited-state behavior. To make comparisons, the octyloxy derivative of ICOL, 5-isocyano-1-(octyloxy)naphthalene (ICON), was also prepared. We found that internal charge transfer (ICT) takes place between the isocyano and −OH groups of ICOL, and we determined the values of the dipole moments for the ground and excited states of both ICOL and ICON. Furthermore, in the emission spectra of ICOL, a second band at higher wavelengths (green emission) in solvents of higher polarities (dual emission), in addition to the band present at lower wavelengths (blue emission), were observed. The extent of this dual emission increases in the order of 2-propanol < methanol < N,N-dimethylformamide (DMF) < dimethyl sulfoxide (DMSO). The presence of the dual fluorescence of ICOL in these solvents can be ascribed to ESPT. For ICOL, we also determined ground- and excited-state pKa values of 8.4 ± 0.3 and 0.9 ± 0.7, respectively, which indicates a considerable increase in acidity upon excitation. The TRES experiments showed that the excited-state lifetimes of the ICOL and ICON spanned from 10.1 ns to 5.0 ns and from 5.7 ns to 3.8 ns, respectively. In addition, we demonstrated that ICOL can be used as an effective indicator of not only the critical micelle concentration (cmc) of ionic (sodium lauryl sulfate (SLS)) and nonionic surfactants (Tween 80), but also other micellar parameters, such as partition coefficients, as well as to map the microenvironments in the cavities of biomacromolecules (e.g., BSA). It is also pointed out that fluorescence quenching by pyridine can effectively be utilized for the determination of the fractions of ICOL molecules that reside at the water−micelle interface and in the interior spaces of micelles.

Novel Polyurethane Scaffolds Containing Sucrose Crosslinker for Dental Application.

In this paper, the synthesis, characterization, and properties of crosslinked poly(ε-caprolactone)-based polyurethanes as potential tissue replacement materials are reported. The polyurethane prepolymers were prepared from poly(ε-caprolactone)diol (PCD), polyethylene glycol (PEG)/polylactic acid diol (PLAD), and 1,6-hexamethylene diisocyanate (HDI). In these segmented polyurethanes, the role of PEG/PLAD was to tune the hydrophobic/hydrophilic character of the resulting polymer while sucrose served as a crosslinking agent. PLAD was synthesized by the polycondensation reaction of D,L-lactic acid and investigated by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and nuclear magnetic resonance spectroscopy (NMR). The crosslinked polyurethane samples (SUPURs) obtained were characterized by attenuated total reflectance Fourier-transform infrared spectroscopy (AT-FT-IR), swelling, and mechanical (uniaxial tensile tests) experiments. The thermo and thermomechanical behavior were studied by differential scanning calorimetry (DSC) and dynamical mechanical analysis (DMA). The viability of dental pulp stem cells was investigated in the case of polyurethanes composed of fully biocompatible elements. In our studies, none of our polymers showed toxicity to stem cells (DPSCs).

Quantification of Polyethylene Glycol 400 Excreted in the Urine by MALDI-TOF Mass Spectrometry.

Polyethylene glycol 400 (PEG 400) was used as a permeability probe to examine the gastrointestinal tract which can be involved in the pathogenesis of some inflammatory and autoimmune diseases. A novel methodology was developed and validated for the quantitation of PEG 400 excreted in human urine after oral administration using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). The excretion ratios were determined for the most intense ions corresponding to nine PEG 400 oligomers. The relative error of accuracy was between -6.0% and 8.5%, and the relative standard deviation (RSD) of the precision was below 15%. Our method was successfully applied in a large-scale experimental study involving nearly two hundred volunteers. Due to the large number of measurements, detailed and reliable statistical analysis was performed. No significant difference was found between the male and female group of volunteers at 0.05 significance level, except the two largest PEG oligomers. However, the average excretion ratios of the male volunteers are greater than that of the women for all the nine PEG oligomers, suggesting a difference in the intestinal permeability between men and women.

Catalytic Decomposition of Long-Chain Olefins to Propylene via Isomerization-Metathesis Using Latent Bicyclic (Alkyl)(Amino)Carbene-Ruthenium Olefin Metathesis Catalysts.

One of the most exciting scientific challenges today is the catalytic degradation of non-biodegradable polymers into value-added chemical feedstocks. The mild pyrolysis of polyolefins, including high-density polyethylene (HDPE), results in pyrolysis oils containing long-chain olefins as major products. In this paper, novel bicyclic (alkyl)(amino)carbene ruthenium (BICAAC-Ru) temperature-activated latent olefin metathesis catalysts, which can be used for catalytic decomposition of long-chain olefins to propylene are reported. These thermally stable catalysts show significantly higher selectivity to propylene at a reaction temperature of 75 °C compared to second generation Hoveyda-Grubbs or CAAC-Ru catalysts under ethenolysis conditions. The conversion of long-chain olefins (e.g., 1-octadecene or methyl oleate) to propylene via isomerization-metathesis is performed by using a (RuHCl)(CO)(PPh3 )3 isomerization co-catalyst. The reactions can be carried out at a BICAAC-Ru catalyst loading as low as 1 ppm at elevated reaction temperature (75 °C). The observed turnover number and turnover frequency are as high as 55 000 and 10 000 molpropylene molcatalyst -1 h-1 , respectively.

Synthesis of Sucrose-HDI Cooligomers: New Polyols for Novel Polyurethane Networks.

Sucrose-1,6-hexamethylene diisocyanate (HDI) cooligomers were synthesized and used as new polyols for poly(ε-caprolactone) (PCL)-based polyurethanes. The polyaddition reaction of sucrose and HDI was monitored by MALDI-TOF MS. It was found that by selecting appropriate reaction conditions, mostly linear oligomer chains containing 16 sucrose units could be obtained. For the synthesis of polyurethane networks, prepolymers were prepared by the reaction of poly(ε-caprolactone) (PCL, 10 kg/mol) with HDI or 4,4'-methylene diphenyl diisocyanate (MDI) and were reacted with sucrose-HDI cooligomers. The so-obtained sucrose-containing polyurethanes were characterized by means of attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FT IR), swelling, mechanical (uniaxial tensile tests) and differential scanning calorimetry (DSC).

Isocyanide Substitution in Acridine Orange Shifts DNA Damage-Mediated Phototoxicity to Permeabilization of the Lysosomal Membrane in Cancer Cells.

In cancer therapy, immunogenic cell death eliminates tumor cells more efficiently than conventional apoptosis. During photodynamic therapy (PDT), some photosensitizer (PS) targeting lysosomes divert apoptosis to the immunologically more relevant necrosis-like cell death. Acridine orange (AO) is a PS targeting lysosome. We synthesized a new compound, 3-N,N-dimethylamino-6-isocyanoacridine (DM), a modified AO, aiming to target lysosomes better. To compare DM and AO, we studied optical properties, toxicity, cell internalization, and phototoxicity. In addition, light-mediated effects were monitored by the recently developed QUINESIn method on nuclei, and membrane stability, morphology, and function of lysosomes utilizing fluorescent probes by imaging cytometry in single cells. DM proved to be a better lysosomal marker at 405 nm excitation and lysed lysosomes more efficiently. AO injured DNA and histones more extensively than DM. Remarkably, DM's optical properties helped visualize shockwaves of nuclear DNA released from cells during the PDT. The asymmetric polar modification of the AO leads to a new compound, DM, which has increased efficacy in targeting and disrupting lysosomes. Suitable AO modification may boost adaptive immune response making PDT more efficient.