Controller for an Axial Flow Blood Pump.

A rotary blood pump inherently provides only one noninvasive "observable'" parameter (motor current) and allows for only one "controllable" parameter (pump speed). To maintain the systemic circulation properly, the pump speed must be controlled to sustain appropriate outlet Hows and perfusion pressure while preventing pulmonary damage caused by extremes in preload. Steady-state data were collected at repeated intervals during chronic trials of the Nimbus AxiPump (Nimbus, Inc., Rancho Cordova, California, U.S.A.) in sheep (n = 7) and calves (n = 12). For each data set, the pump speed was increased at increments of 500 rpm until left ventricular and left atrial emptying was observed by left atrial pressure diminishing to zero. The effect of decreasing preload was evaluated perioperatively by inferior vena cava occlusion at a constant pump speed. Fourier analysis established a relationship between changes in the pump preload and the power spectra of the pump current waveform. Based on these results, a control method was devised to avoid ventricular collapse and maintain the preload within a physiologic range. The objective of this controller is the minimization of the second and third harmonic of the periodic current waveform. This method is intended to provide a noninvasive regulation of the pump by eliminating the need for extraneous transducers.

High-Resolution Fluorescent Particle-Tracking Flow Visualization within an Intraventricular Axial Flow Left Ventricular Assist Device.

Flow visualization is typically applied in blood pump development to both confirm the design expectations and identify regions that may be predisposed to blood element deposition and trauma. Rotary pumps, in particular, place high demands on the technique chosen to visualize the flow given the limited visual accessibility of the flow path and the high impeller speeds. Fluorescent image-tracking velocimetry currently is used at the University of Pittsburgh Medical Center to visualize flow accurately inside of these pumps both qualitatively and quantitatively. Flow patterns under steady conditions within an intraventricular axial flow, left ventricular assist pump (prototype No. 7, SUN Medical Technology Research Corporation, Nagano, Japan) were investigated using this technique. The flow fields at the impeller-stator interface and at the pump outlet were given specific attention. This allowed the assessment of the fluid dynamics throughout the hydrodynamic design limits of the pump.