The Interaction of Heparin Tetrasaccharides with Chemokine CCL5 Is Modulated by Sulfation Pattern and pH.

Interactions between chemokines such as CCL5 and glycosaminoglycans (GAGs) are essential for creating haptotactic gradients to guide the migration of leukocytes into inflammatory sites, and the GAGs that interact with CCL5 with the highest affinity are heparan sulfates/heparin. The interaction between CCL5 and its receptor on monocytes, CCR1, is mediated through residues Arg-17 and -47 in CCL5, which overlap with the GAG-binding (44)RKNR(47) "BBXB" motifs. Here we report that heparin and tetrasaccharide fragments of heparin are able to inhibit CCL5-CCR1 binding, with IC50 values showing strong dependence on the pattern and extent of sulfation. Modeling of the CCL5-tetrasaccharide complexes suggested that interactions between specific sulfate and carboxylate groups of heparin and residues Arg-17 and -47 of the protein are essential for strong inhibition; tetrasaccharides lacking the specific sulfation pattern were found to preferentially bind CCL5 in positions less favorable for inhibition of the interaction with CCR1. Simulations of a 12-mer heparin fragment bound to CCL5 indicated that the oligosaccharide preferred to interact simultaneously with both (44)RKNR(47) motifs in the CCL5 homodimer and engaged residues Arg-47 and -17 from both chains. Direct engagement of these residues by the longer heparin oligosaccharide provides a rationalization for its effectiveness as an inhibitor of CCL5-CCR1 interaction. In this mode, histidine (His-23) may contribute to CCL5-GAG interactions when the pH drops just below neutral, as occurs during inflammation. Additionally, an examination of the contribution of pH to modulating CCL5-heparin interactions suggested a need for careful interpretation of experimental results when experiments are performed under non-physiological conditions.

Tumor cell targeting by iron oxide nanoparticles is dominated by different factors in vitro versus in vivo.

Realizing the full potential of iron oxide nanoparticles (IONP) for cancer diagnosis and therapy requires selective tumor cell accumulation. Here, we report a systematic analysis of two key determinants for IONP homing to human breast cancers: (i) particle size and (ii) active vs passive targeting. In vitro, molecular targeting to the HER2 receptor was the dominant factor driving cancer cell association. In contrast, size was found to be the key determinant of tumor accumulation in vivo, where molecular targeting increased tumor tissue concentrations for 30 nm but not 100 nm IONP. Similar to the in vitro results, PEGylation did not influence in vivo IONP biodistribution. Thus, the results reported here indicate that the in vitro advantages of molecular targeting may not consistently extend to pre-clinical in vivo settings. These observations may have important implications for the design and clinical translation of advanced, multifunctional, IONP platforms.

Molecular sensing with magnetic nanoparticles using magnetic spectroscopy of nanoparticle Brownian motion.

Functionalized magnetic nanoparticles (mNPs) have shown promise in biosensing and other biomedical applications. Here we use functionalized mNPs to develop a highly sensitive, versatile sensing strategy required in practical biological assays and potentially in vivo analysis. We demonstrate a new sensing scheme based on magnetic spectroscopy of nanoparticle Brownian motion (MSB) to quantitatively detect molecular targets. MSB uses the harmonics of oscillating mNPs as a metric for the freedom of rotational motion, thus reflecting the bound state of the mNP. The harmonics can be detected in vivo from nanogram quantities of iron within 5s. Using a streptavidin-biotin binding system, we show that the detection limit of the current MSB technique is lower than 150 pM (0.075 pmole), which is much more sensitive than previously reported techniques based on mNP detection. Using mNPs conjugated with two anti-thrombin DNA aptamers, we show that thrombin can be detected with high sensitivity (4 nM or 2 pmole). A DNA-DNA interaction was also investigated. The results demonstrated that sequence selective DNA detection can be achieved with 100 pM (0.05 pmole) sensitivity. The results of using MSB to sense these interactions, show that the MSB based sensing technique can achieve rapid measurement (within 10s), and is suitable for detecting and quantifying a wide range of biomarkers or analytes. It has the potential to be applied in variety of biomedical applications or diagnostic analyses.

Design and analysis of immune-evading enzymes for ADEPT therapy.

The unparalleled specificity and activity of therapeutic proteins has reshaped many aspects of modern clinical practice, and aggressive development of new protein drugs promises a continued revolution in disease therapy. As a result of their biological origins, however, therapeutic proteins present unique design challenges for the biomolecular engineer. For example, protein drugs are subject to immune surveillance within the patient's body; this anti-drug immune response can compromise therapeutic efficacy and even threaten patient safety. Thus, there is a growing demand for broadly applicable protein deimmunization strategies. We have recently developed optimization algorithms that integrate computational prediction of T-cell epitopes and bioinformatics-based assessment of the structural and functional consequences of epitope-deleting mutations. Here, we describe the first experimental validation of our deimmunization algorithms using Enterobacter cloacae P99 ß-lactamase, a component of antibody-directed enzyme prodrug cancer therapies. Compared with wild-type or a previously deimmunized variant, our computationally optimized sequences exhibited significantly less in vitro binding to human type II major histocompatibility complex immune molecules. At the same time, our globally optimal design exhibited wild-type catalytic proficiency. We conclude that our deimmunization algorithms guide the protein engineer towards promising immunoevasive candidates and thereby have the potential to streamline biotherapeutic development.

Heparin mimetics.

Explorations of the therapeutic potential of heparin mimetics, anionic compounds that are analogues of glycosaminoglycans (GAGs), have gone hand-in-hand with the emergence of understanding as to the role of GAGs in many essential biological processes. A myriad of structurally different heparin mimetics have been prepared and examined in many diverse applications. They range in complexity from heterogeneous polysaccharides that have been chemically sulphated to well-defined compounds, designed in part to mimic the natural ligand, but with binding specificity and potency increased by conjugation to non-carbohydrate pharmacophores. The maturity of the field is illustrated by the seven heparin mimetics that have achieved marketing approval and there are several more in late-stage clinical development. An overview of the structural determinants of heparin mimetics is presented together with an indication of their activities. The challenges in developing heparin mimetics as drugs, specificity and potential toxicity issues, are highlighted. Finally, the development path of three structurally very different mimetics, PI-88(®), GMI-1070 and RGTAs, each of which is in clinical trials, is described.

Kinetics of chemokine-glycosaminoglycan interactions control neutrophil migration into the airspaces of the lungs.

Chemokine-glycosaminoglycan (GAG) interactions are thought to result in the formation of tissue-bound chemokine gradients. We hypothesized that the binding of chemokines to GAGs would increase neutrophil migration toward CXC chemokines instilled into lungs of mice. To test this hypothesis we compared neutrophil migration toward recombinant human CXCL8 (rhCXCL8) and two mutant forms of CXCL8, which do not bind to heparin immobilized on a sensor chip. Unexpectedly, when instilled into the lungs of mice the CXCL8 mutants recruited more neutrophils than rhCXCL8. The CXCL8 mutants appeared in plasma at significantly higher concentrations and diffused more rapidly across an extracellular matrix in vitro. A comparison of the murine CXC chemokines, KC and MIP-2, revealed that KC was more effective in recruiting neutrophils into the lungs than MIP-2. KC appeared in plasma at significantly higher concentrations and diffused more rapidly across an extracellular matrix in vitro than MIP-2. In kinetic binding studies, KC, MIP-2, and rhCXCL8 bound heparin differently, with KC associating and dissociating more rapidly from immobilized heparin than the other chemokines. These data suggest that the kinetics of chemokine-GAG interactions contributes to chemokine function in tissues. In the lungs, it appears that chemokines, such as CXCL8 or MIP-2, which associate and disassociate slowly from GAGs, form gradients relatively slowly compared with chemokines that either bind GAGs poorly or interact with rapid kinetics. Thus, different types of chemokine gradients may form during an inflammatory response. This suggests a new model, whereby GAGs control the spatiotemporal formation of chemokine gradients and neutrophil migration in tissue.

Platelet endothelial cell adhesion molecule 1 (PECAM-1) and its interactions with glycosaminoglycans: 2. Biochemical analyses.

Platelet endothelial cell adhesion molecule 1 (PECAM-1) (CD31), a member of the immunoglobulin (Ig) superfamily of cell adhesion molecules with six Ig-like domains, has a range of functions, notably its contributions to leukocyte extravasation during inflammation and in maintaining vascular endothelial integrity. Although PECAM-1 is known to mediate cell adhesion by homophilic binding via domain 1, a number of PECAM-1 heterophilic ligands have been proposed. Here, the possibility that heparin and heparan sulfate (HS) are ligands for PECAM-1 was reinvestigated. The extracellular domain of PECAM-1 was expressed first as a fusion protein with the Fc region of human IgG1 fused to domain 6 and second with an N-terminal Flag tag on domain 1 (Flag-PECAM-1). Both proteins bound heparin immobilized on a biosensor chip in surface plasmon resonance (SPR) binding experiments. Binding was pH-sensitive but is easily measured at slightly acidic pH. A series of PECAM-1 domain deletions, prepared in both expression systems, were tested for heparin binding. This revealed that the main heparin-binding site required both domains 2 and 3. Flag-PECAM-1 and a Flag protein containing domains 1-3 bound HS on melanoma cell surfaces, but a Flag protein containing domains 1-2 did not. Heparin oligosaccharides inhibited Flag-PECAM-1 from binding immobilized heparin, with certain structures having greater inhibitory activity than others. Molecular modeling similarly identified the junction of domains 2 and 3 as the heparin-binding site and further revealed the importance of the iduronic acid conformation for binding. PECAM-1 does bind heparin/HS but by a site that is distinct from that required for homophilic binding.

Direct detection of the binding of avidin and lactoferrin fluorescent probes to heparinized surfaces.

We describe the use of two heparin-binding proteins, avidin and lactoferrin, as probes for monitoring the amount of heparin immobilized to plastic surfaces. The proteins were derivatized with either fluorescent labels or europium chelates, enabling sensitive, fast, reproducible, and robust assays, and were used to measure the amount of protein bound to heparinized microplates, with particular attention to plates that have been coated with bovine serum albumin (BSA)-heparin conjugate. This direct method unequivocally shows that BSA-heparin affords an economical, convenient, and reliable method for coating both polystyrene microtiter plates and magnetic beads with heparin. We demonstrate that assays using directly labeled proteins overcome the problems of dissociation of the heparin-protein complex, which can occur during incubation and washing steps associated with antibody-based detection methods, and the loss in binding capacity caused by certain blocking regimes. We suggest that labeled avidin and lactoferrin are convenient probes for heparinized surfaces with the potential for much wider applicability than that presented here.

Probing the interactions of phosphosulfomannans with angiogenic growth factors by surface plasmon resonance.

The binding interactions of the phosphosulfomannan anticancer agent PI-88 (1) with the angiogenic growth factors FGF-1, FGF-2, and VEGF were studied by surface plasmon resonance (SPR) on a BIAcore 3000 biosensor. Compared with heparin, PI-88 has at least 11-fold higher affinity for FGF-1 and at least 3-fold higher affinity for VEGF, but at least 13-fold lower affinity for FGF-2. To define the structural features of PI-88 that are important for growth factor binding, several analogues, such as dephosphorylated PI-88 and a sulfated pentasaccharide, were prepared. The binding interactions of these analogues with FGF-1, FGF-2, and VEGF were similarly studied by SPR, and structure-activity relationships were determined.

The reaction of acetylacetone with amino sugars: implications for the formation of glycosylpyrazole derivatives.

Glycosylpyrazoles are efficiently formed by reaction of saccharide hydrazones with pentan-2,4-dione (acetylacetone), but in aqueous buffer, pyrazole derivatives of amino sugars couple with a further equivalent of acetylacetone affording high yields of ketoenamines. These ketoenamines were considerably more stable than the ketoenamines formed from 2-amino-2-deoxy aldoses that have been described as intermediates in the classical Elson-Morgan reaction. Moreover, high yields of perketoenamine derivatives were achieved with oligosaccharides derived from hydrolysis of chitosan. The removal of the ketoenamine moieties to regenerate the free amine was readily accomplished with aqueous hydrazine.

Avidin is a heparin-binding protein. Affinity, specificity and structural analysis.

The specificity, affinity and stoichiometry of the interaction between avidin and glycosaminoglycans (GAGs) have been investigated using heparin-coated microtiter-plate assays, a filter binding assay and surface plasmon resonance (SPR) analysis using a BIAcore 2000 biosensor. Avidin binds heparin and heparan sulfate, and chondroitin-4-sulfate, chondroitin-6-sulfate, dermatan sulfate or hyaluronan were unable to compete for binding. Highest-affinity binding was observed with heparin, and weaker binding was seen when using heparan sulfate or low molecular weight heparin preparations. This indicated that only specific polysaccharide structures tightly interact with avidin. Approximately two avidin molecules bind to each heparin molecule with an overall affinity of 160 nM. The interaction is pH dependent, increasing five-fold upon decreasing the pH from 7.5 to 5.5, while binding was negligible at pH 9. We demonstrate the potential of fluorescent avidin derivatives as a tool for the detection of heparin and heparan sulfates on surfaces by application to both heparin immobilized on polystyrene plates and heparan sulfate on cell surfaces.

Protein-heparin interactions measured by BIAcore 2000 are affected by the method of heparin immobilization.

Surface plasmon resonance (SPR) biosensors such as the BIAcore 2000 are a useful tool for the analysis of protein-heparin interactions. Generally, biotinylated heparin is captured on a streptavidin-coated surface to create heparinized surfaces for subsequent binding analyses. In this study we investigated three commonly used techniques for the biotinylation of heparin, namely coupling through either carboxylate groups or unsubstituted amines along the heparin chain, or through the reducing terminus of the heparin chain. Biotinylated heparin derivatives were immobilized on streptavidin sensor chips and several heparin-binding proteins were examined. Of the surfaces investigated, heparin attached through the reducing terminus had the highest binding capacity, and in some cases had a higher affinity for the proteins tested. Heparin immobilized via intrachain bare amines had intermediate binding capacity and affinity, and heparin immobilized through the carboxylate groups of uronic acids had the lowest capacity for the proteins tested. These results suggest that immobilizing heparin to a surface via intrachain modifications of the heparin molecule can affect the binding of particular heparin-binding proteins.