Cardiac Health Assessment Using a Wearable Device Before and After Transcatheter Aortic Valve Implantation: Prospective Study.

Background: Due to aging of the population, the prevalence of aortic valve stenosis will increase drastically in upcoming years. Consequently, transcatheter aortic valve implantation (TAVI) procedures will also expand worldwide. Optimal selection of patients who benefit with improved symptoms and prognoses is key, since TAVI is not without its risks. Currently, we are not able to adequately predict functional outcomes after TAVI. Quality of life measurement tools and traditional functional assessment tests do not always agree and can depend on factors unrelated to heart disease. Activity tracking using wearable devices might provide a more comprehensive assessment. Objective: This study aimed to identify objective parameters (eg, change in heart rate) associated with improvement after TAVI for severe aortic stenosis from a wearable device. Methods: In total, 100 patients undergoing routine TAVI wore a Philips Health Watch device for 1 week before and after the procedure. Watch data were analyzed offline-before TAVI for 97 patients and after TAVI for 75 patients. Results: Parameters such as the total number of steps and activity time did not change, in contrast to improvements in the 6-minute walking test (6MWT) and physical limitation domain of the transformed WHOQOL-BREF questionnaire. Conclusions: These findings, in an older TAVI population, show that watch-based parameters, such as the number of steps, do not change after TAVI, unlike traditional 6MWT and QoL assessments. Basic wearable device parameters might be less appropriate for measuring treatment effects from TAVI.

The Influence Of Epicardial Resistance On Microvascular Resistance Reserve.

BACKGROUND: The optimal index of microvascular function should be specific for the microvascular compartment. Yet, coronary flow reserve (CFR), despite being widely used to diagnose coronary microvascular dysfunction (CMD), is influenced by both epicardial and microvascular resistance. Conversely, microvascular resistance reserve (MRR) adjusts for fractional flow reserve (FFR), and thus is theoretically independent of epicardial resistance. OBJECTIVES: We tested the hypothesis that MRR, unlike CFR, is not influenced by increasing epicardial resistance, and thus is a more specific index of microvascular function. METHODS: In a cohort of 16 patients that had undergone proximal left anterior descending artery stenting, we created four grades of artificial stenosis (no stenosis, mild, moderate, and severe) using a coronary angioplasty balloon inflated to different degrees within the stent. For each stenosis grade, we calculated CFR and MRR using continuous thermodilution (64 measurements of each) in order to assess their response to changing epicardial resistance. RESULTS: Graded balloon inflation resulted in a significant sequential decrease in mean FFR (no stenosis: 0.82 ±0.05; mild: 0.72 ±0.04; moderate: 0.61 ±0.05; severe: 0.48 ±0.09, p<0.001). This translated into a linear decrease in mean hyperaemic coronary flow (no stenosis: 170.5 ±66.8 ml/min; mild: 149.8 ±58.8 ml/min; moderate: 124.4 ±53.0 ml/min; severe: 94.0 ±45.2 ml/min, p<0.001). CFR exhibited a marked linear decrease with increasing stenosis (no stenosis: 2.5 ±0.9; mild: 2.2 ±0.8; moderate: 1.8 ±0.7; severe: 1.4 ±0.6), corresponding to a decrease of 0.3 for a decrease in FFR of 0.1 (p<0.001). In contrast, MRR exhibited a negligible decrease across all stenosis grades (no stenosis: 3.0 ±1.0; mild: 3.0 ±1.0; moderate: 2.9 ±1.0; severe: 2.8 ±1.0), corresponding to a decrease of just 0.05 for a decrease in FFR of 0.1 (p<0.001). CONCLUSION: MRR, unlike CFR, is minimally influenced by epicardial resistance, and thus should be considered the more specific index of microvascular function. This suggests that MRR can also reliably evaluate microvascular function in patients with significant epicardial disease.

Measuring Absolute Coronary Flow and Microvascular Resistance by Thermodilution: JACC Review Topic of the Week.

Diagnosing coronary microvascular dysfunction remains challenging, primarily due to the lack of direct measurements of absolute coronary blood flow (Q) and microvascular resistance (Rµ). However, there has been recent progress with the development and validation of continuous intracoronary thermodilution, which offers a simplified and validated approach for clinical use. This technique enables direct quantification of Q and Rµ, leading to precise and accurate evaluation of the coronary microcirculation. To ensure consistent and reliable results, it is crucial to follow a standardized protocol when performing continuous intracoronary thermodilution measurements. This document aims to summarize the principles of thermodilution-derived absolute coronary flow measurements and propose a standardized method for conducting these assessments. The proposed standardization serves as a guide to ensure the best practice of the method, enhancing the clinical assessment of the coronary microcirculation.

Validation of a novel numerical model to predict regionalized blood flow in the coronary arteries.

Aims: Ischaemic heart disease results from insufficient coronary blood flow. Direct measurement of absolute flow (mL/min) is feasible, but has not entered routine clinical practice in most catheterization laboratories. Interventional cardiologists, therefore, rely on surrogate markers of flow. Recently, we described a computational fluid dynamics (CFD) method for predicting flow that differentiates inlet, side branch, and outlet flows during angiography. In the current study, we evaluate a new method that regionalizes flow along the length of the artery. Methods and results: Three-dimensional coronary anatomy was reconstructed from angiograms from 20 patients with chronic coronary syndrome. All flows were computed using CFD by applying the pressure gradient to the reconstructed geometry. Side branch flow was modelled as a porous wall boundary. Side branch flow magnitude was based on morphometric scaling laws with two models: a homogeneous model with flow loss along the entire arterial length; and a regionalized model with flow proportional to local taper. Flow results were validated against invasive measurements of flow by continuous infusion thermodilution (Coroventis™, Abbott). Both methods quantified flow relative to the invasive measures: homogeneous (r 0.47, P 0.006; zero bias; 95% CI -168 to +168 mL/min); regionalized method (r 0.43, P 0.013; zero bias; 95% CI -175 to +175 mL/min). Conclusion: During angiography and pressure wire assessment, coronary flow can now be regionalized and differentiated at the inlet, outlet, and side branches. The effect of epicardial disease on agreement suggests the model may be best targeted at cases with a stenosis close to side branches.

Changes in absolute flow, myocardial resistance and FFR after chronic total occlusion percutaneous coronary intervention.

BACKGROUND: Randomised studies of percutaneous coronary intervention (PCI) in patients with chronic total occlusion (CTO) have shown inconsistent outcomes, suggesting incomplete understanding of this cohort and their coronary physiology. To address this shortcoming, we designed a prospective observational study to measure the recovery of absolute coronary blood flow following successful CTO PCI Aims: We sought to identify patient and procedural characteristics associated with a favourable physiological outcome after CTO PCI. METHODS: Consecutive patients with a CTO subtending viable myocardium underwent PCI utilising contemporary techniques and the hybrid algorithm. Immediately after PCI, and at 3-month follow-up, physiological measurements were performed utilising continuous thermodilution. RESULTS: A total of 81 patients were included with a mean age of 63.6±8.9 years, and 66 (81.5%) were male. Physiological measurements of absolute coronary blood flow in the CTO vessel increased by 30% (p<0.001) and microvascular resistance reduced by 16% (p<0.001) from immediately post-CTO PCI to follow-up assessment. Fractional flow reserve increased by 0.02 (p=0.015) in the same period. Prior coronary artery bypass graft (CABG) and a higher estimated glomerular filtration rate (eGFR) were associated with a larger change in absolute flow. An extraplaque strategy was associated with a smaller change in absolute flow. CONCLUSIONS: Post-CTO PCI, there is a continued augmentation in absolute coronary blood flow and reduction in microvascular resistance from baseline to follow-up at 3 months. Prior CABG and a higher baseline eGFR were predictors of a larger change in absolute coronary flow, whilst an extraplaque final wire path strategy predicted a smaller change. Lastly, the patient characteristics and comorbidities had a larger influence than procedural factors on the observed change in absolute flow.

Prognostic Value of Measuring Fractional Flow Reserve After Percutaneous Coronary Intervention in Patients With Complex Coronary Artery Disease: Insights From the FAME 3 Trial.

BACKGROUND: We evaluate the prognostic value of measuring fractional flow reserve (FFR) after percutaneous coronary intervention (post-PCI FFR) and intravascular imaging in patients undergoing PCI for 3-vessel coronary artery disease in the FAME 3 trial (Fractional Flow Reserve versus Angiography for Multivessel Evaluation). METHODS: The FAME 3 trial is a multicenter, international, randomized study comparing FFR-guided PCI with coronary artery bypass grafting in patients with multivessel coronary artery disease. PCI was not noninferior with respect to the primary end point of death, myocardial infarction, stroke, or repeat revascularization at 1 year. Post-PCI FFR data were acquired on a patient and vessel-related basis. Intravascular imaging guidance was tracked. The primary end point is a comparison of target vessel failure (TVF) defined as a composite of cardiac death, target vessel myocardial infarction, and target vessel revascularization at 1 year based on post-PCI FFR values. Cox regression with robust SEs was used for analysis. RESULTS: Of the 757 patients randomized to PCI, 461 (61%) had post-PCI FFR measurement and 11.1% had intravascular imaging performed. The median post-PCI FFR was 0.89 [IQR' 0.85-0.94]. On a vessel-level, post-PCI FFR was found to be a significant predictor of TVF univariately (hazard ratio=0.67 [95% CI' 0.48-0.93] for 0.1 unit increase, P=0.0165). On a patient-level, the single lowest post-PCI FFR value was also found to be a significant predictor of TVF univariately (hazard ratio=0.65 [95% CI' 0.48-0.89] for 0.1 unit increase, P=0.0074). Post-PCI FFR was an independent predictor of TVF in multivariable analysis adjusted for key clinical parameters. Outcomes were similar between patients who had intravascular imaging guidance and those who did not. CONCLUSIONS: Post-PCI FFR measurement was a significant predictor of TVF on a vessel and patient level and an independent predictor of outcomes in a population with complex 3-vessel coronary artery disease eligible for coronary artery bypass grafting. The limited use of intravascular imaging did not affect outcomes. REGISTRATION: URL: https://www. CLINICALTRIALS: gov; Unique identifier: NCT02100722.

Changes in coronary collateral function after successful chronic total occlusion percutaneous coronary intervention.

BACKGROUND: Contemporary chronic total occlusion (CTO) percutaneous coronary intervention (PCI) incorporates wire escalation and dissection/re-entry recanalisation strategies. AIMS: The purpose of the study was to investigate changes in collateral function after CTO PCI and to identify whether the mode of successful recanalisation influences collateral function regression. METHODS: Patients scheduled for elective CTO PCI with evidence of viability in the CTO territory by noninvasive imaging were included in this study. After successful CTO PCI, the aortic pressure (Pa) and distal coronary artery wedge pressure (Pw) during balloon occlusion were measured, both in a resting state and during infusion of intravenous adenosine, allowing the calculation of the pressure-derived collateral pressure index at rest and hyperaemia (CPIrest and the collateral fractional flow reserve [FFRcoll], respectively). Measurements were repeated 3 months later during angiographic follow-up. RESULTS: Eighty-one patients had physiological measurements at baseline and follow-up. In the final cohort the mean age was 64 years and 82% were male. The mean maximal stent diameter and total stent length were 3.2±0.5 mm and 68±31 mm, respectively. Successful strategies were antegrade wiring (64.2%), antegrade dissection re-entry (8.6%), and retrograde dissection re-entry (27.1%). Between the index procedure and follow-up, wedge pressure decreased from 34±11 mmHg to 21±8.5 mmHg (p<0.01), respectively. FFRcoll changed from 0.34±0.11 to 0.19±0.09 (p<0.01) at follow-up and CPIrest from 0.40±0.14 to 0.17±0.09 (p<0.01). Absolute maximum collateral flow decreased from 55±32 ml/min directly after PCI to 38±24 ml/min (p<0.01). There was no relation between the recanalisation technique and changes in FFRcoll. CONCLUSIONS: There was a significant reduction in collateral flow over time, independent of the recanalisation technique.

Automation of intracoronary continuous thermodilution for absolute coronary flow and microvascular resistance measurements.

AIM: Microvascular resistance reserve (MRR) as derived from continuous intracoronary thermodilution specifically quantifies microvasculature function. As originally described, the technique necessitates reinstrumentation of the artery and manual reprogramming of the infusion pump when performing resting and hyperemic measurements. To simplify and to render this procedure operator-independent, we developed a fully automated method. The aim of the present study is to validate the automated procedure against the originally described one. METHODS AND RESULTS: For the automated procedure, an infusion pump was preprogrammed to allow paired resting-hyperemic thermodilution assessment without interruption. To validate the accuracy of this new approach, 20 automated measurements were compared to those obtained in the same vessels with conventional paired resting-hyperemic thermodilution measurements (i.e., with a sensor pullback at each infusion rate and manual reprogramming of the infusion pump).  A close correlation between the conventional and the automated measuring technique was found for resting flow (Qrest : r = 0.89, mean bias = 2.52; SD = 15.47), hyperemic flow (Qhyper : r = 0.88, mean bias = -2.65; SD = 27.96), resting microvascular resistance (Rµ-rest : r = 0.90, mean bias = 52.14; SD = 228.29), hyperemic microvascular resistance Rµ-hyper : r = 0.92, mean bias = 12.95; SD = 57.80), and MRR (MRR: r = 0.89, mean bias = 0.04, SD = 0.59).  Procedural time was significantly shorter with the automated method (5'25″ ± 1'23″ vs. 4'36″ ± 0'33″, p = 0.013). CONCLUSION: Continuous intracoronary thermodilution-derived measurements of absolute flow, absolute resistance, and MRR can be fully automated. This further shortens and simplifies the procedure when performing paired resting-hyperemic measurements.

Refining Our Understanding of the Flow Through Coronary Artery Branches; Revisiting Murray's Law in Human Epicardial Coronary Arteries.

Background: Quantification of coronary blood flow is used to evaluate coronary artery disease, but our understanding of flow through branched systems is poor. Murray's law defines coronary morphometric scaling, the relationship between flow (Q) and vessel diameter (D) and is the basis for minimum lumen area targets when intervening on bifurcation lesions. Murray's original law (Q α DP) dictates that the exponent (P) is 3.0, whilst constant blood velocity throughout the system would suggest an exponent of 2.0. In human coronary arteries, the value of Murray's exponent remains unknown. Aim: To establish the exponent in Murray's power law relationship that best reproduces coronary blood flows (Q) and microvascular resistances (Rmicro) in a bifurcating coronary tree. Methods and Results: We screened 48 cases, and were able to evaluate inlet Q and Rmicro in 27 branched coronary arteries, taken from 20 patients, using a novel computational fluid dynamics (CFD) model which reconstructs 3D coronary anatomy from angiography and uses pressure-wire measurements to compute Q and Rmicro distribution in the main- and side-branches. Outputs were validated against invasive measurements using a Rayflow™ catheter. A Murray's power law exponent of 2.15 produced the strongest correlation and closest agreement with inlet Q (zero bias, r = 0.47, p = 0.006) and an exponent of 2.38 produced the strongest correlation and closest agreement with Rmicro (zero bias, r = 0.66, p = 0.0001). Conclusions: The optimal power law exponents for Q and Rmicro were not 3.0, as dictated by Murray's Law, but 2.15 and 2.38 respectively. These data will be useful in assessing patient-specific coronary physiology and tailoring revascularisation decisions.

Hypothermia for Cardioprotection in Patients with St-Elevation Myocardial Infarction: Do Not Give It the Cold Shoulder Yet!

The timely revascularization of an occluded coronary artery is the cornerstone of treatment in patients with ST-elevation myocardial infarction (STEMI). As essential as this treatment is, it can also cause additional damage to cardiomyocytes that were still viable before reperfusion, increasing infarct size. This has been termed "myocardial reperfusion injury". To date, there is still no effective treatment for myocardial reperfusion injury in patients with STEMI. While numerous attempts have been made to overcome this hurdle with various experimental therapies, the common denominator of these therapies is that, although they often work in the preclinical setting, they fail to demonstrate the same results in human trials. Hypothermia is an example of such a therapy. Although promising results were derived from experimental studies, multiple randomized controlled trials failed to do the same. This review includes a discussion of hypothermia as a potential treatment for myocardial reperfusion injury, including lessons learned from previous (negative) trials, advanced techniques and materials in current hypothermic treatment, and the possible future of hypothermia for cardioprotection in patients with STEMI.

Ultrastructural Characteristics of Myocardial Reperfusion Injury and Effect of Selective Intracoronary Hypothermia: An Observational Study in Isolated Beating Porcine Hearts.

In acute myocardial infarction (AMI), myocardial reperfusion injury may undo part of the recovery after revascularization of the occluded coronary artery. Selective intracoronary hypothermia is a novel method aimed at reducing myocardial reperfusion injury, but its presumed protective effects in AMI still await further elucidation. This proof-of-concept study assesses the potential protective effects of selective intracoronary hypothermia in an ex-vivo, isolated beating heart model of AMI. In four isolated Langendorff perfused beating pig hearts, an anterior wall myocardial infarction was created by inflating a balloon in the mid segment of the left anterior descending (LAD) artery. After one hour, two hearts were treated with selective intracoronary hypothermia followed by normal reperfusion (cooled hearts). In the other two hearts, the balloon was deflated after one hour, allowing normal reperfusion (control hearts). Biopsies for histologic and electron microscopic evaluation were taken from the myocardium at risk at different time points: before occlusion (t = BO); 5 minutes before reperfusion (t = BR); and 10 minutes after reperfusion (t = AR). Electron microscopic analysis was performed to evaluate the condition of the mitochondria. Histological analyses included evaluation of sarcomeric collapse and intramyocardial hematoma. Electron microscopic analysis revealed intact mitochondria in the hypothermia treated hearts compared to the control hearts where mitochondria were more frequently damaged. No differences in the prespecified histological parameters were observed between cooled and control hearts at t = AR. In the isolated beating porcine heart model of AMI, reperfusion was associated with additional myocardial injury beyond ischemic injury. Selective intracoronary hypothermia preserved mitochondrial integrity compared to nontreated controls.

Left atrial reverse remodeling predicts long-term survival after cardiac resynchronization therapy.

BACKGROUND: Left ventricular (LV) reverse remodeling has been identified as a strong predictor of long-term survival in patients receiving CRT. Interestingly, CRT induces reverse remodeling in the left atrium (LA) as well. It is currently unknown to what extent LA reverse remodeling is correlated to long-term survival after CRT. This study aims to assess the long-term prognostic value of left atrium (LA) reverse remodeling in patients undergoing cardiac resynchronization therapy (CRT). METHODS: Baseline and 3-months follow-up echocardiograms after CRT implantation were prospectively assessed to determine changes in left ventricular end-systolic volume (LVESV), left ventricular ejection fraction (LVEF), left atrial volume (LAV), and left atrial reservoir strain (LASr). Multivariate Cox regression analysis was performed to identify predictors for long-term survival. RESULTS: In our study population of 99 patients with a mean follow-up of 6.3 ± 2.1 years, 43 patients (43%) reached the end-point of all-cause mortality. More extensive LA reverse remodeling, as measured by a relative increase in LASr, was observed in survivors compared to non-survivors (43 [29-64] % vs. 8 [2-28] %, P < 0.001, respectively). After multivariate analysis, delta LASr remained the only significant predictor of mortality [HR per 5%: 0.90 (0.86-0.95); AUC 0.78 (0.68-0.88)]. CONCLUSION: An increase in LASr is associated with favorable long-term outcome after CRT. The observed clinical importance of LA reverse remodeling after CRT asks for further validation in larger prospective cohorts.

Microvascular Resistance Reserve for Assessment of Coronary Microvascular Function: JACC Technology Corner.

The need for a quantitative and operator-independent assessment of coronary microvascular function is increasingly recognized. We propose the theoretical framework of microvascular resistance reserve (MRR) as an index specific for the microvasculature, independent of autoregulation and myocardial mass, and based on operator-independent measurements of absolute values of coronary flow and pressure. In its general form, MRR equals coronary flow reserve (CFR) divided by fractional flow reserve (FFR) corrected for driving pressures. In 30 arteries, pressure, temperature, and flow velocity measurements were obtained simultaneously at baseline (BL), during infusion of saline at 10 mL/min (rest) and 20 mL/min (hyperemia). A strong correlation was found between continuous thermodilution-derived MRR and Doppler MRR (r = 0.88; 95% confidence interval: 0.72-0.93; P < 0.001). MRR was independent from the epicardial resistance, the lower the FFR value, the greater the difference between MRR and CFR. Therefore, MRR is proposed as a specific, quantitative, and operator-independent metric to quantify coronary microvascular dysfunction.

Hypothermia for Reduction of Myocardial Reperfusion Injury in Acute Myocardial Infarction: Closing the Translational Gap.

Myocardial reperfusion injury-triggered by an inevitable inflammatory response after reperfusion-may undo a considerable part of the myocardial salvage achieved through timely percutaneous coronary intervention in patients with acute myocardial infarction. Because infarct size is strongly correlated to mortality and risk of heart failure, the importance of endeavors for cardioprotective therapies to attenuate myocardial reperfusion injury and decrease infarct size remains undisputed. Myocardial reperfusion injury is the result of several complex nonlinear phenomena, and for a therapy to be effective, it should act on multiple targets involved in this injury. In this regard, hypothermia remains a promising treatment despite a number of negative randomized controlled trials in humans with acute myocardial infarction so far. To turn the tide for hypothermia in patients with acute myocardial infarction, sophisticated solutions for important limitations of systemic hypothermia should continue to be developed. In this review, we provide a comprehensive overview of the pathophysiology and clinical expression of myocardial reperfusion injury and discuss the current status and possible future of hypothermia for cardioprotection in patients with acute myocardial infarction.

Quantification of Absolute Myocardial Flow and Resistance by Continuous Thermodilution in Patients with Ischemia and Nonobstructive Coronary Artery Disease (INOCA).

In approximately half of the patients undergoing coronary angiography for angina pectoris or for signs or symptoms suggestive of ischemic heart disease, no obstructive coronary artery disease is angiographically visible. The majority of these patients with angina or ischemia and no obstructive coronary artery disease (INOCA) have an underlying coronary vasomotor dysfunction, and current consensus documents recommend diagnostic invasive coronary vasomotor function testing (CFT). During CFT, a variety of vasomotor dysfunction endotypes can be assessed, including vasospastic coronary dysfunction (epicardial or microvascular vasospasm), and/or microvascular vasodilatory dysfunction, including impaired vasodilatory capacity and increased microvascular resistance. The quantification of the continuous thermodilution derived absolute coronary blood flow and resistance might be a better measure compared to the currently used standard physiologic measures. This article provides an overview of this continuous thermodilution method.

Coronary microvascular dysfunction assessed by continuous intracoronary thermodilution: A comparative study with index of microvascular resistance.

BACKGROUND: This study aimed to assess the correlation between the standard of care, the index of microvascular resistance (IMR) versus the novel microvascular resistance (Rmicro) and to determine the pathologic cut-off value in a selected population with suspected coronary microvascular dysfunction (CMD). METHODS: One-hundred and twenty patients with high clinical suspicion of CMD due to ischemic symptoms in the absence of significant epicardial coronary lesions were prospectively included. Following a standardized systematic protocol, coronary flow reserve, IMR, fractional flow reserve, Q and Rmicro were measured in the left anterior descending coronary artery using a temperature/pressure sensor-tipped guidewire and a dedicated infusion catheter. RESULTS: There was a high prevalence of CMD with 50 (42%) patients showing an IMR ≥ 25. Median IMR was 23 [IQR: 14-34] and median Rmicro was 464 Woods Units (WU) [IQR: 354-636WU]. ROC analyses identified 500 WU as the optimal Rmicro cut-off to identify patients with an IMR ≥ 25, with an area under the ROC curve (C statistic) of 0.83 (95% CI: 0.74 to 0.89, p < 0.0001). CONCLUSIONS: Rmicro derived from continuous intracoronary thermodilution is an accurate index to measure microvascular resistances enabling the invasive diagnostic of CMD.

Basics of Coronary Thermodilution.

Coronary microvascular dysfunction is a highly prevalent condition in both obstructive and nonobstructive coronary artery disease. Intracoronary thermodilution is a promising technique to investigate coronary microvascular (dys)function in vivo and to assess its most important metric: microvascular resistance. Here, the authors provide a practical review of bolus and continuous thermodilution for the measurement of coronary flow and microvascular resistance. The authors describe the basic principles of indicator-dilution theory and of coronary thermodilution and detail the practicalities of their application in the catheterization laboratory. Finally, the authors discuss contemporary clinical applications of coronary thermodilution-based microvascular assessment in humans and future perspectives.

High microvascular resistance and reduced left atrial strain in patients with coronary microvascular dysfunction: The micro-strain study.

BACKGROUND: It is already known that high coronary microvascular resistance (Rµ) is linked to altered left ventricular stiffness and might be an early indicator of heart failure with preserved ejection fraction (HFpEF). Left atrial dysfunction, on the other hand, varies according to the grade of left ventricular diastolic dysfunction. This is the first study to use the latest development for invasive assessment of Rµ and to combine it with echocardiographic assessment of left atrial strain during reservoir phase (LASr) by speckle tracking in relation to left ventricular (LV) diastolic function. METHODS AND RESULTS: An invasive angiogram was performed in 97 patients because of suspected ANOCA. All patients underwent comprehensive echocardiography, yet image quality was poor in 15 patients leaving 82 patients to include in the final analysis. In order to compare Rµ with LASr values, patients were divided into 4 groups based upon normal values of Rµ as defined by Fournier et al. The mean LASr was plotted against the four resistance groups. The LASr was 48.6% in the lowest resistance group, and 40.1%, 36.3% and 30.1% in the low intermediate, high intermediate and high resistance group respectively. These differences were significant compared to the lowest resistance group (p < 0.05). Although higher Rµ groups showed more diastolic dysfunction, LASr was already decreased irrespective of the severity of diastolic dysfunction. CONCLUSION: This study shows a relationship between increased Rµ and reduced LASr, that seems to precede conventional measures of left ventricular diastolic dysfunction. This suggests that microvascular dysfunction might be an early indicator for the development of impaired LA function.