Debris and Smear Layer Removal in Curved Root Canals: A Comparative Study of Ultrasonic and Sonic Irrigant Activation Techniques.

The aim of this study was to compare the cleaning efficacy of three irrigant activation devices with a control of non-activated syringe and needle irrigation in curved root canals. Sixty human curved roots were endodontically prepared and divided into four groups (n = 15) with similar root curvature distributions. Final irrigation using 4% NaOCl was performed with a syringe and needle (30-G) alone, or with Eddy sonic powered irrigation system (polymeric tip #0.25/0.06), Endosonic ultrasonic activation (polymeric tip #0.25/0.03), or Irrisafe ultrasonic activation (stainless-steel tip, #0.25/0.00). SEM was used to evaluate cleaning efficacy, employing five-score systems for debris and smear layer. While no significant difference in debris removal was observed between Endosonic or Irrisafe activation and non-activated irrigation, Eddy sonic powered irrigation system significantly improved debris removal in the apical third of curved root canals. Smear layer removal was effective in coronal and mid-root sections for all groups but less so in the apical third. Thus, Eddy sonic powered irrigation system demonstrated higher efficacy in removing debris from the apical third of curved root canals compared with non-activated syringe and needle irrigation. However, all three irrigant activation systems exhibited no difference from the non-activated control in smear layer removal.

Efficacy of Different Irrigant Activation Systems on Debris and Smear Layer Removal: A Scanning Electron Microscopy Evaluation.

Background: Irrigation is an essential component of root canal treatment to enable cleaning beyond the reach of mechanical instruments. The study aimed to assess and compare the efficacy of different final irrigation protocols, including sonic- and ultrasonic-powered irrigant-activation systems, on debris and smear layer removal in the coronal, middle, and apical thirds of straight oval root canals. Materials and Methods: Straight oval root canals of 60 human mandibular incisors were prepared to size 40.04 and divided into four groups (n = 15) according to the final irrigation protocols: (a) Eddy sonic activation (b) endosonic passive ultrasonic irrigation (PUI), (c) irrisafe PUI, and (d) manual syringe and needle irrigation with no additional activation, which served as control. After the treatment procedures, the roots were split and observed using scanning electron microscopy. The presence of remaining debris and smear layer at the coronal, mid-root, and apical thirds of the canals were evaluated using a score system and statistically analyzed using multinominal models with significance level set at p < 0.05. Results: None of the final irrigation protocols completely removed all debris and smear layer from all root canals. When the syringe and needle were used without activation, more debris and smear layer were found in the apical third of the canals. Activation of the final irrigant with each of the three devices significantly reduced the presence of debris in the apical third, compared to the syringe and needle final irrigation, with no difference among the three activation devices. Eddy and irrisafe activation also significantly reduced the residual smear layer in the apical third, compared to syringe and needle alone, while the reduction in the remaining smear layer by endosonic activation did not reach the significance level. Conclusions: Removal of debris and smear layer from the apical part of the root canal by syringe and needle irrigation alone may be significantly improved by using sonic or ultrasonic activation of the final irrigant. Endosonic activation was less effective in removal of smear layer from the apical part of the canals compared to the other two activation systems.

Can Type of Instrumentation and Activation of the Final Irrigant Improve the Obturation Quality in Oval Root Canals? A Push-Out Bond Strength Study.

To appraise the outcome of file systems and activation of the final irrigant on the push-out bond strength of root fillings in oval canals. Single-rooted mandibular premolars (n = 180) with oval canals were divided into three groups (n = 60) for instrumentation: ProTaper Next (PTN), WaveOne (WO), and Self-adjusting File (SAF). The specimens were further divided into subgroups (n = 20) and subjected to final irrigation with activation by EndoActivator or passive ultrasonic irrigation or without activation. Then, the specimens were again subdivided (n = 10) and obturated with gutta-percha and AH Plus (GP-AH) or C-Point with EndoSequence bioceramic sealer (C-EBC). One-millimeter-thick horizontal slices were cut from the apical third of the root, 5 mm from the apex, and subjected to push-out bond strength (BS) testing. Specimens for which SAF was used exhibited higher BS values than those for which PTN or WO was used (p < 0.05). Activation of the final irrigation did not affect the BS of the root fillings. Root fillings made of C-EBC presented a higher BS than those made of GP-AH (p < 0.05). Adhesive failure was more common with specimens instrumented using PTN and WO. Root canals instrumented with SAF, showed the highest bond strength values for both root filling materials. The C-EBC produced significantly higher bond strength values than those of the GP-AH.

Healing after surgical retreatment at four time points: A retrospective study.

AIM: To evaluate the outcome of surgical retreatment at four time points, that is 6, 12, 24 and 48 months post-operatively, and to search for prognostic factors that may affect the outcome. METHODOLOGY: Clinical records and intraoral periapical radiographs were collected from patients who had undergone surgical retreatment between 2009 and 2015 and attended 6-, 12-, 24- and 48-month follow-up visits. Surgical retreatment was performed by one endodontist and involved minimal root-end resection and maximal length root-end preparation using prebent ultrasonic files. Outcomes were categorized as complete, incomplete, uncertain or unsatisfactory healing, based on clinical and radiographic findings. The complete and incomplete categories were pooled and considered successes, while uncertain and unsatisfactory outcomes were considered failures. Changes in healing outcome were analysed using the McNemar-Bowker test, and prognostic factors were analysed using univariate analysis. RESULTS: The study cohort included 297 patients with 384 teeth. The overall success rate after 48 months was 90.6% compared with 88.5%, 93% and 92.4% after 6, 12 and 24 months respectively. Age, gender, presence of isthmus and length of canal preparation had no significant influence on the outcome. Lesion size and tooth type had a significant influence only after 6 and 12 months, respectively, with no significant differences at other time points. Fifty per cent of the teeth classified as unsatisfactory or uncertain healing at the 6 months follow-up improved to incomplete or complete healing after 12 months. None of the cases classified as unsatisfactory healing after 12 months subsequently improved, and only 2 cases that were classified as uncertain healing after 12 months improved after 24 months. CONCLUSIONS: Surgical retreatment was found to be a predictable procedure with a high success rate of 90.6% after 4 years. Over the follow-up periods, only a minor regression in the success rate was found. The 12 months follow-up results closely indicated the long-term outcome of surgical retreatment.

Deficiencies in Root Canal Fillings Subsequent to Adaptive Instrumentation of Oval Canals.

The purpose of this study was to explore the influence of instrumentation and the potential for debris deposition using XP-endo shaper plus (XP-SP) and full-sequence SAF (F-SAF) on the adaption of thermoplastic root canal fillings in oval canals. Following the manufacturer's instructions, ninety human permanent mandibular incisors with a single oval canal 6 mm from the apex (verified using pre-operative CBCT scanning) were instrumented with XP-SP and F-SAF. Obtura III Max apparatus was used for root canal obturation without the use of a root canal sealer. The roots were then sectioned 6 mm from the apex and examined with a digital stereomicroscope at x25 magnification to assess the root canal fillings. The F-SAF was associated with a significantly higher (p < 0.01) percentage of entire adaptation of the root fillings (76%) compared to the XP-SP (57%). Furthermore, the XP-SP group was also associated with higher (p < 0.01) defective obturation with debris at 17% and with voids at 26%. However, the F-SAF had lower percentages of defective obturations (7% with debris and 17% with voids). The quality of obturation of oval canals instrumented using full-sequence SAF was better.

Apical debris extrusion during instrumentation of oval root canals in primary teeth using manual versus motorized files: an ex vivo study.

This study aimed to assess the apical extrusion of debris during instrumentation of primary canines using three endodontic file types. Forty-five extracted primary canines were randomly assigned to three instrumentation groups (n = 15): Hand K-files; and the motorized Kedo-S files and XP-endo Shaper files. The apically extruded debris produced during the procedure was collected and dried in pre-weighed Eppendorf tubes, and the mass of debris was calculated. The time required for the endodontic procedure was also recorded. Analysis of variance (ANOVA) and Tukey's post hoc test were used with a significance level set at 5%. XP-endo Shaper and Kedo-S files extruded significantly less debris compared with hand K-files with means of 0.84 ± 0.31 and 1.20 ± 0.67 mg respectively, compared to 2.13 ± 0.31 mg (p < 0.0001). No significant difference was found between the two motorized files. Less time was required to complete the procedure with the XP-endo Shaper compared to the hand K-files (p < 0.0001) and Kedo-S files (p < 0.0001). Within the limitations of the present study, it may be concluded that motorized files extruded less debris and required less instrumentation time compared to traditional K-files, which could benefit paediatric patients with root canal treatment needs.

Effect of Adaptive, Rotary, and Manual Root Canal Instrumentation in Primary Molars: A Triple-Armed, Randomized Controlled Clinical Trial.

This clinical trial focused on collating the instrumentation time and quality of root canal obturation in primary molars treated with three instrumentation techniques: adaptive, rotary, and manual. A triple-armed, randomized controlled clinical trial was performed on 75 primary molars requiring pulpectomy treatment, divided into three groups (n = 25 per group). The teeth in Group 1 were instrumented with an adaptive technique (XP-endo Shaper, FKG Dentaire, La Chaux-de-Fonds, Switzerland), Group 2 with pediatric rotary files (Kedo-S; D1 and E1), and Group 3 with a manual technique (hand K-files). The apical size of the final instrumentation was maintained at #30 for all groups. Instrumentation time and the grade of the root canal obturation were evaluated. Instrumentation duration was recorded, employing a digital stopwatch from the insertion of the first file until the completion of final irrigation. Obturation quality was assessed using radiographs. The criteria taken as a reference for obturation were: optimal (1 mm short of the apex), underfilled (2 mm short of the apex), or overfilled (beyond the apex). The use of an adaptive technique was associated with the lowest instrumentation time (p < 0.0001) when used for instrumenting primary molars and with the highest root canal filling quality of the three groups. The application of the new concept of adaptive instrumentation for pulpectomy of primary molars was a favorable technique, considering the significant reduction in instrumentation time and better obturation.

Prevalence of dens invaginatus in young Israeli population and its association with clinical morphological features of maxillary incisors.

Dens invaginatus is an anomaly mostly observed in maxillary incisors. This study aimed to assess the prevalence of dens invaginatus in maxillary incisors in young Israeli population and to study its potential association with clinical coronal morphological features. Data was collected from periapical radiographs and clinical photographs of patients from Orthodontics Department between 2006 and 2018. Radiographic characteristics were evaluated and compared to clinical coronal morphological features. Statistical analysis was performed using the Pearson chi-square test with statistical significance set at p < 0.05. The sample included 1621 maxillary incisors from 547 patients. Dens invaginatus was observed in 422 (26%) of these teeth. Maxillary lateral incisors were more affected than central incisors. In 103 patients dens invaginatus was unilateral, while in all other cases it was bilateral. Unique clinical morphological characteristics were observed in 88% of the teeth that exhibited radiographic evidence of dens invaginatus. Dens invaginatus Type I was most frequently observed, accounting for 90% of the teeth. A significant association between clinical coronal morphological features and dens invaginatus was detected. Dens invaginatus is common in maxillary incisors of the study population. Several clinical morphological features may predict the presence of dens invaginatus.

Accuracy for diagnosis of periapical cystic lesions.

Clinical differentiation between cystic lesions of endodontic and non-endodontic origin is of importance because correct diagnosis may affect treatment decision making. Most radicular cysts are treated with conservative approaches and, therefore, are not surgically removed. The objective of this study was to determine the accuracy of clinical diagnosis of periapical lesions as compared to the histological findings, and to evaluate various associated factors. All biopsy specimens submitted for histological evaluation from 2002 to 2009 were assessed. Only cases of periapical lesions with complete patient data and clinical diagnosis were included. Sensitivity, specificity and accuracy of the clinical diagnosis were calculated and various patient-related factors were evaluated. Of the 4,908 cases, 183 met inclusion criteria. Histologically, there were 171 lesions of radicular cysts and 12 cases of non-endodontic cysts, including OKC and Incisive Canal Cyst. The diagnostic accuracy for clinical diagnosis for radicular cysts was 91.84% and 91.84% for non-endodontic cysts. There was a high accuracy of clinical differentiation between cystic lesions of endodontic and non-endodontic origin. However, some non-endodontic lesions may be incorrectly diagnosed clinically as lesions of endodontic origin. Histological evaluation may be necessary for the correct diagnosis. Further clinical studies are needed to evaluate clinical examination and histological diagnosis of periapical lesions.

Cleanliness and erosion of root canal walls after irrigation with a new HEDP-based solution vs. traditional sodium hypochlorite followed by EDTA. A scanning electron microscope study.

OBJECTIVES: To compare the cleanliness and erosion of root canal walls after the use of a new HEDP (1-hydroxyethane-1,1-diphosphonic acid) -based irrigant with that achieved by irrigation with sodium hypochlorite followed by EDTA. MATERIALS AND METHODS: Forty recently extracted single-rooted teeth were prepared with ProTaper Next files to size X3, using either HEDP-containing 3% sodium hypochlorite, throughout the procedure (n = 20), or 3% sodium hypochlorite followed by a final rinse with 17% EDTA (n = 20), which were both applied with a syringe and needle. Ten additional teeth were prepared and irrigated with saline and served as negative controls. The teeth were split longitudinally and subjected to SEM evaluation for the presence of a smear layer, debris, and erosion of the root canal wall. The Pearson chi-square test was used to compare the results, and the level of significance was set at p < 0.05. RESULTS: In both groups, there were more cases with a smear layer in the apical third of the root canal than in the coronal third, but the groups did not differ from each other significantly (p = 0.545). The root canal walls in both groups were almost free of debris, showing no difference between the groups (p = 0.342). Moderate erosion of the root dentine was found in 10-26% of the cases in both groups, but severe erosion was detected in only one case in each of the groups, which did not differ significantly from each other (p = 0.606). CONCLUSION: Within the limitations of the present study, the HEDP-based irrigation solution did not differ from 3% sodium hypochlorite followed by EDTA in terms of cleanliness or the incidence of erosion of the canal wall. CLINICAL RELEVANCE: When used with syringe and needle irrigation, the new HEDP-based irrigant is convenient and safe but should not be expected to result in cleaner canal walls than 3% sodium hypochlorite followed by 17% EDTA.

Root canal configuration and root wall thickness of first maxillary premolars in an Israeli population. A Cone-beam computed tomography study.

Anatomical features of first maxillary premolars may greatly affect endodontic and following restorative treatments. The aim of this study was to evaluate root canal configuration and root wall thickness of first maxillary premolars using a preexisting CBCT database. A CBCT database of 400 first maxillary premolar was used to study canal configuration, presence of furcation-facing groove on the buccal root and root wall thickness. Root wall thickness was measured from axial CBCT slices at three critical points of the root: The most coronal part of the furcation-facing groove in the buccal root, when present, the CEJ level of the palatal root and 5 mm apically to the CEJ level of the palatal root. Vertucci Type IV configuration was the most common among all teeth, but in single-rooted teeth, Vertucci Type II was predominant. The mean thickness of the buccal root in the area of a furcation-facing groove was 1.1 (±0.2) mm, but in 39% of the cases, it was thinner than 1 mm. The mean thickness of the palatal root at 5 mm from the CEJ was 1.1 (±0.2), but in 28% of the cases, it was thinner than 1 mm. Thickness of root dentin walls of first maxillary premolars varies and may be limited at critical points in both buccal and palatal roots. In case the patient has a previous CBCT scan it may be useful for planning treatment of first maxillary premolars, in order to recognize and avoid potential risks such as furcation-facing groove, thin dentin walls in critical areas and presence of Type II Verucci canal, all of which may dictate less invasive procedures, using smaller files.

Dentinal defects induced by 6 different endodontic files when used for oval root canals: an in vitro comparative study.

OBJECTIVES: To compare the formation of dentinal defects using stainless-steel hand K-files (HFs), rotary files, reciprocating files, and Self-Adjusting File (SAF), when used for oval root canals. MATERIALS AND METHODS: One hundred and forty extracted human mandibular premolar with single root and oval canal were selected for this study. Oval canals were confirmed by exposing to mesio-distal and bucco-lingual radiographs. Teeth with open apices or anatomic irregularities were excluded. All selected teeth were de-coronated perpendicular to the long axis of the tooth, leaving roots segments approximately of 16 mm in length. Twenty teeth were left unprepared (control), and the remaining 120 teeth were divided into 6 groups (n = 20) and instrumented using HF (size 40/0.02), Revo-S (RS; size 40/0.06), ProTaper NEXT (PTN; size 40/0.06), WaveOne (WO; size 40/0.09), RECIPROC (RC; size 40/0.06), and the SAF (2 mm). Roots were then sectioned 3, 6, and 9 mm from the apex, and observed under stereomicroscope, for presence of dentinal defects. "No defect" was defined as root dentin that presented with no visible microcracks or fractures. "Defect" was defined by microcracks or fractures in the root dentin. RESULTS: The control, HF, and SAF did not exhibit any dentinal defects. In roots instrumented by RS, PTN, WO, and RC files exhibited microcracks (incomplete or complete) in 40%, 30%, 55%, and 50%, respectively. CONCLUSIONS: The motor-driven root canal instrumentation with rotary and reciprocating files may create microcracks in radicular dentine, whereas the stainless-steel hand file instrumentation, and the SAF produce minimal or less cracks.

Efficacy of self-adjusting file, XP-endo finisher and passive ultrasonic irrigation on the removal of calcium hydroxide paste from an artificial standardized groove.

The purpose of this study was to compare the effectiveness of self-adjusting file (SAF), XP-endo finisher (XP), passive ultrasonic irrigation (PUI) and conventional syringe and needle irrigation (SNI) in the removal of Ca(OH)2 from an artificial groove. Eighty mandibular incisors with single oval canals were prepared to size 40/0.04 and split longitudinally. A standardised groove was prepared in the apical third and filled with Ca(OH)2 . The root halves were reassembled and divided into two control groups (n = 4) and four experimental groups (n = 18) according to the removal methods used. The amount of residual Ca(OH)2 was evaluated using a four-grade scoring system. The differences among the groups were analysed using the Kruskal-Wallis test (P < 0.05). SAF, XP and PUI removed significantly more Ca(OH)2 than SNI (P < 0.001), although there were no significant differences among them (P = 0.209). None of the tested methods could completely clean Ca(OH)2 from the groove.

Apical extrusion of debris during the preparation of oval root canals: a comparative study between a full-sequence SAF system and a rotary file system supplemented by XP-endo finisher file.

OBJECTIVES: The purpose of this study was to assess the amount of apically extruded debris during the preparation of oval canals with either a rotary file system supplemented by the XP-endo Finisher file or a full-sequence self-adjusting file (SAF) system. MATERIALS AND METHODS: Sixty mandibular incisors were randomly assigned to two groups: group A: stage 1-glide path preparation with Pre-SAF instruments. Stage 2-cleaning and shaping with SAF. Group B: stage 1-glide path preparation with ProGlider file. Stage 2-cleaning and shaping with ProTaper Next system. Stage 3-Final cleaning with XP-endo Finisher file. The debris extruded during each of the stages was collected, and the debris weights were compared between the groups and between the stages within the groups using t tests with a significance level set at P < 0.05. RESULTS: The complete procedure for group B resulted in significantly more extruded debris compared to group A. There was no significant difference between the stages in group A, while there was a significant difference between stage 2 and stages 1 and 3 in group B, but no significant difference between stages 1 and 3. CONCLUSIONS: Both instrumentation protocols resulted in extruded debris. Rotary file followed by XP-endo Finisher file extruded significantly more debris than a full-sequence SAF system. Each stage, in either procedure, had its own contribution to the extrusion of debris. CLINICAL RELEVANCE: Final preparation with XP-endo Finisher file contributes to the total amount of extruded debris, but the clinical relevance of the relative difference in the amount of apically extruded debris remains unclear.

Extrusion of Debris from Primary Molar Root Canals following Instrumentation with Traditional and New File Systems.

INTRODUCTION: To assess the amount of debris extruded apically during instrumentation of distal canals of extracted primary molars by three instrument systems [ProTaper Universal (PTU), ProTaper NEXT (PTN), and self-adjusting file (SAF)] compared with conventional stainless steel hand K-files (HF, control). MATERIALS AND METHODS: Primary mandibular molars (n = 120) with a single distal canal were selected and randomly divided into four groups (n = 30) for root canal instrumentation using group I, HF (to size 0.30/0.02 taper), group II, PTU (to size F3), group III, PTN (to size X3), and group IV, SAF. Debris extruded during instrumentation was collected in preweighed Eppendorf tubes, stored in an incubator at 70°C for 5 days and then weighed. Statistical analysis was performed by one-way analysis of variance (ANOVA), followed by Turkey's post hoc test (p = 0.05). RESULTS: All the groups resulted in extrusion of debris. There was statistically significant difference (p < 0.001) in the debris extrusion between the three groups: HF (0.00133 ± 0.00012), PTU (0.00109 ± 0.00005), PTN (0.00052 ± 0.00008), and SAF (0.00026 ± 0.00004). CONCLUSION: Instrumentation with SAF resulted in the least debris extrusion when used for shaping root canals of primary molar teeth. CLINICAL SIGNIFICANCE: Debris extrusion in primary teeth poses an adverse effect on the stem cells and may also alter the permanent dental germ. Debris extrusion is rarely reported for primary teeth and it is important for the clinician to know which endodontic instrumentation leads to less extrusion of debris.

Effect of glide path preparation on apical extrusion of debris in root canals instrumented with three single-file systems: An ex vivo comparative study.

AIM: The aim of this study was to test the effect of new protocol of glide path preparation by 20/0.04 rotary file on apical extrusion of debris when instrumenting fine curved mesial canals in mandibular molars with Self-adjusting File (SAF) and compare it to a glide path prepared by 20/0.02 hand K-file and rotary OneShape (OS) and reciprocating WaveOne (WO) file instrumentation. MATERIALS AND METHODS: Sixty mandibular molars with curved mesial roots were selected and randomly divided into three groups (n = 20) for instrumentation. In two groups, glide path was prepared using 20/0.02 K-file for instrumentation by OS (size 25/0.06 taper) and WO (size 25/0.08 taper) files; in the remaining group, 20/0.04 rotary file was used for glide path preparation and instrumented by SAF (1.5 mm). The debris extruded during instrumentation was collected in preweighed Eppendorf tubes and stored in an incubator at 70°C for 5 days. Tubes containing the dry extruded debris were then weighed. One-way analysis of variance (ANOVA) was applied to the weights obtained, followed by Tukey's post hoc test for multiple comparison. RESULTS: The mean debris (g) extruded apically was 0.000651 ± 0.000291, 0.000823 ± 0.000319, and 0.000473 ± 0.000238 for Group 1 (20/0.02 + OS), Group 2 (20/0.02 + WO), and Group 3 (20/0.04 + SAF), respectively. The groups exhibited a significant difference (P < 0.01; ANOVA). Group 3 resulted in least debris extrusion compared to Groups 1 and 2 (P < 0.01; Tukey's post hoc test). CONCLUSION: Glide path prepared to size 20/0.04 and SAF 1.5 mm instrumentation produce less debris in curved mesial canals of mandibular molars, compared to glide path established by 20/0.02 and instrumentation by OS and WO files.

Root canal morphology and variations in mandibular second molar teeth of an Indian population: an in vivo cone-beam computed tomography analysis.

OBJECTIVES: This study aims to investigate the root canal morphology of permanent mandibular second molars of an Indian population in vivo using cone-beam computed tomography (CBCT) images. METHODS: CBCT images (n = 983; males = 489, females = 494) of untreated, completely developed permanent mandibular second molar teeth were examined. CBCT scans were acquired as part of diagnosis and treatment planning for treatments unrelated to the present study. The number of roots and root canals were recorded. Canal configuration was classified based on Vertucci's and Fan's classifications. RESULTS: The most common configuration was two-root (79.35%) and three-root canals (53.50%). The incidence of three-rooted molars was 7.53%, whereas 13.12% of the studied teeth studied have fused roots with C-shaped canals. The predominant canal morphology in the mesial roots was Vertucci's type IV (45.17%), followed by type II (32.55%), type I (7.23%), type V (1.02%), and type III (0.91%). The distal root in contrast showed type I (61.14%) as the predominant canal configuration, followed by type II (18.21%) and type IV (7.53%). The incidence of three-rooted molars was higher in males (n = 55; 5.59%) than in females (n = 19; 1.94%) (p < 0.01). The canals in the extra roots exhibited type I (100%) root canal morphology. In teeth with C-shaped root canal (13.12%), the variations in the coronal, middle, and apical third ranged from C1 to C4. CONCLUSIONS: Root canal systems of the mesial roots of mandibular second molars of the study population demonstrated a high degree of variability. While three roots were rare, there was a sexual predisposition. Fused roots with C-shaped canals were rare and demonstrated significant variations from the coronal to apical third. CLINICAL RELEVANCE: Root canal morphology can demonstrate variations based on race and sex of patients. Clinicians must always consider the possible variations to ensure successful endodontic treatment.

Assessment of the fracture resistance of teeth instrumented using 2 rotary and 2 reciprocating files versus the Self-Adjusting File (SAF): An ex vivo comparative study on mandibular premolars.

AIM: Current ex vivo study compared fracture resistance of teeth instrumented using 5 endodontic files, filled with Gutta-percha and AH Plus. MATERIALS AND METHODS: Sixty freshly extracted, single-rooted mandibular premolars were acquired and decoronated to obtain 15 mm segments. These samples were randomly divided into six groups (n = 10). Group 1 served as the control containing untreated samples (without instrumentation or filling). In Groups 2-6, samples were instrumented using rotary (Universal ProTaper and Revo-S), reciprocating (WaveOne and RECIPROC(®)), and self-adjusting file (SAF), respectively. Following instrumentation, the samples were filled by lateral compaction with Gutta-percha and AH Plus. A week later, after the sealer was completely set, a vertical load was applied to the specimen's canal in each group until fracture. The loads required for fracture were recorded, and statistical analysis was performed. RESULTS: The mean fracture load differed significantly among the groups (P < 0.01; one-way ANOVA). Tukey's post-hoc tests revealed that the fracture resistance was similar in the control and SAF groups (P > 0.05) and was significantly higher than that of the 2 rotary and reciprocating groups (P < 0.01). CONCLUSION: The samples instrumented by the SAF exhibited a better fracture resistance.

The efficacy of the Self-Adjusting File versus WaveOne in removal of root filling residue that remains in oval canals after the use of ProTaper retreatment files: A cone-beam computed tomography study.

AIM: The current ex vivo study compared the efficacy of removing root fillings using ProTaper retreatment files followed by either WaveOne reciprocating file or the Self-Adjusting File (SAF). MATERIALS AND METHODS: Forty maxillary canines with single oval root canal were selected and sectioned to obtain 18-mm root segments. The root canals were instrumented with WaveOne primary files, followed by obturation using warm lateral compaction, and the sealer was allowed to fully set. The teeth were then divided into two equal groups (N = 20). Initial removal of the bulk of root filling material was performed with ProTaper retreatment files, followed by either WaveOne files (Group 1) or SAF (Group 2). Endosolv R was used as a gutta-percha softener. Preoperative and postoperative high-resolution cone-beam computed tomography (CBCT) was used to measure the volume of the root filling residue that was left after the procedure. Statistical analysis was performed using t-test. RESULTS: The mean volume of root filling residue in Group 1 was 9.4 (±0.5) mm(3), whereas in Group 2 the residue volume was 2.6 (±0.4) mm(3), (P < 0.001; t-test). CONCLUSIONS: When SAF was used after ProTaper retreatment files, significantly less root filling residue was left in the canals compared to when WaveOne was used.

Self-adjusting file (SAF) separation in clinical use: A preliminary survey among experienced SAF users regarding prevalence and retrieval methods.

CONTEXT: The self-adjusting file (SAFs) is reported to be resistant to file separation in laboratory tests. No information is currently available regarding SAF separation during clinical use. AIM: To conduct preliminary clinical survey among experienced SAF users in order to establish the prevalence of SAF separation during clinical use and to study how were such cases treated. MATERIALS AND METHODS: A questionnaire was sent to experienced SAF users to make inquiries regarding incidence of SAF separation and how were such events treated. Only responses from operators who had used 50 SAFs or more were included in the present study. Fisher's exact test was used to compare file separation occurrence. RESULTS: A total of 2517 SAFs had been used by these operators, and 15 cases of file separation were reported (0.6%). Twelve of these 15 separated files could be retrieved within a few minutes using Hedström files, with no additional dentine removal required. In the three cases in which the separated files could not be retrieved, the separated file segment was successfully bypassed. CONCLUSIONS: The SAF might separate during clinical use, but the incidence of such an event was low. In most such cases, the separated file segment was easily and quickly retrieved without additional removal of dentin.