Hole transport layer based on conjugated polyelectrolytes for polymer solar cells.

We demonstrate the conjugated polyelectrolytes (CPEs) as efficient hole transport layer (HTL) of polymer solar cells. Replacing poly(3,4-ethylenedioxy-thiophene):poly(styrenesulfonate) (PEDOT:PSS) with a CPEs with narrow bandgap results in both improvements in device efficiency and stability. In spite of their narrow bandgap, thin CPE films (thickness of ∼30 nm) enable sufficient light absorption within the active layer. Enhancement of device efficiency is attributed to low surface roughness, high transmittance in visible region, and reduced charge transfer resistance. Compared to the device with PEDOT:PSS, pH neutral nature of CPEs may enhance device stability under ambient condition.

Anodically Grown Binder-Free Nickel Hexacyanoferrate Film: Toward Efficient Water Reduction and Hexacyanoferrate Film Based Full Device for Overall Water Splitting.

One of the challenges in obtaining hydrogen economically by electrochemical water splitting is to identify and substitute cost-effective earth-abundant materials for the traditionally used precious-metal-based water-splitting electrocatalysts. Herein, we report the electrochemical formation of a thin film of nickel-based Prussian blue analogue hexacyanoferrate (Ni-HCF) through the anodization of a nickel substrate in ferricyanide electrolyte. As compared to the traditionally used Nafion-binder-based bulk film, the anodically obtained binder-free Ni-HCF film demonstrates superior performance in the electrochemical hydrogen evolution reaction (HER), which is highly competitive with that shown by a Pt-plate electrode. The HER onset and the benchmark cathodic current density of 10 mA cm-2 were achieved at small overpotentials of 15 mV and 0.2 V (not iR-corrected), respectively, in 1 M KOH electrolyte, together with the long-term electrochemical durability of the film. Further, a metal-HCF-electrode-based full water-splitting device consisting of the binder-free Ni-HCF film on a Ni plate and a one-dimensional Co-HCF film on carbon paper as the electrodes for the HER and the oxygen evolution reaction (OER), respectively, was designed and was found to demonstrate very promising performance for overall water splitting.