Titania Nanotube Architectures Synthesized on 3D-Printed Ti-6Al-4V Implant and Assessing Vancomycin Release Protocols.

The aim of this study is to synthesize Titania nanotubes (TNTs) on the 3D-printed Ti-6Al-4V surface and investigate the loading of antibacterial vancomycin drug dose of 200 ppm for local drug treatment application for 24 h. The antibacterial drug release from synthesized nanotubes evaluated via the chemical surface measurement and the linear fitting of Korsmeyer-Peppas model was also assessed. The TNTs were synthesized on the Ti-6Al-4V surface through the anodization process at different anodization time. The TNTs morphology was characterized using field emission scanning electron microscope (FESEM). The wettability and the chemical composition of the Ti-6Al-4V surface and the TNTs were assessed using the contact angle meter, Fourier transform infrared spectrophotometer (FTIR) and the X-ray photoelectron spectroscopy (XPS). The vancomycin of 200 ppm release behavior under controlled atmosphere was measured by the high-performance liquid chromatography (HPLC) and hence, the position for retention time at 2.5 min was ascertained. The FESEM analysis confirmed the formation of nanostructured TNTs with vertically oriented, closely packed, smooth and unperforated walls. The maximum cumulative vancomycin release of 34.7% (69.5 ppm) was recorded at 24 h. The wetting angle of both Ti-6Al-4V implant and the TNTs were found below 90 degrees. This confirmed their excellent wettability.

Control of nanogeometry for advanced energy applications.

Incorporation of one-dimensional, large-surface-area, conductive nanofibers such as carbon nanotubes or 8 nm diameter TiO2 nanotubes into the dye-sensitized solar cell (DSSC) photo-anodes made of spherical TiO2 nanoparticles is shown to significantly improve the photocurrent density and the energy conversion efficiency. The observed DSSC solar cell efficiency enhancement in the presence of elongated nanoscale elements is attributed primarily to the reduction in microcracking tendency of the anode layer and associated robust electron transport, although some contributions of the electrical conducting nature of the filler material may also be possible. A use of metallic conduction paths such as embedded Ti-coated stainless steel mesh screen in the TiO2 anode layer is also described for enhanced photoanode constructions with a future possibility of FTO (fluorinated tin oxide)-glass-free DSSC. It is also shown that the control of contact resistance during DSSC assembly and electrical connection is an important aspect for more accurate evaluations of DSSC performance.

Improved dye sensitized solar cell performance in larger cell size by using TiO2 nanotubes.

Typical dye sensitized solar cells (DSSCs) exhibit a severe reduction of power conversion efficiency when the cell size is increased. In order to cope with this issue, we have investigated the use of anodized TiO(2) nanotubes on Ti foil in combination with the standard TiO(2) nanoparticle paste coated anode structure. The presence of nanotubes in the anode structure enabled a significant mitigation of the size-dependent deterioration of the DSSC performance, with a trend of much milder decrease of the efficiency as a function of the cell dimension up to 9 cm(2). The observed improvement is partly attributed to the elimination of fluorine-doped tin oxide glass in the anode structure, as well as the enhanced charge collection via the nanotube coated Ti substrate, resulting from enhanced mechanical and electrical connections and possibly improved light trapping. The introduction of TiO(2) nanotubes on the Ti foil substrate led to a substantial improvement of the J(sc) current density.

Extreme superomniphobicity of multiwalled 8 nm TiO2 nanotubes.

We report unprecedented superomniphobic characteristics of nanotube-structured TiO(2) surface fabricated by electrochemical etching and hydrothermal synthesis process, with the wettability contact angles for water and oil both being ∼174° or higher. A tangled forest of ∼8-nm-diameter, multiwalled nanotubes of TiO(2) was produced on the microtextured Ti surface, with the overall nanotube length controlled to 150 nm by adjusting the processing time. Wettability measurements indicate that the nanotube surface is extremely nonwettable to both water and oil. The contact angle of the 8 nm TiO(2) nanotube surface after perfluorosilane coating is extremely high (178°) for water droplets indicating superhydrophobic properties. The contact angle for oil, measured using a glycerol droplet, is also very high, about 174°, indicating superoleophobic characteristics. These dual nonwetting properties, superomniphobic characteristics, are in sharp contrast to the as-made TiO(2) nanotubes which exhibit superhydrophilic properties with a contact angle of essentially ∼0°. Such an extreme superomniphobic material made by a simple and versatile method can be useful for a variety of technical applications. It is interesting to note that all three properties can be obtained with identical nanotube structures. A nanometer-scaled structure introduced by hydrothermally grown TiO(2) nanotubes is an effective air trapping nanostructure in enhancing the amphiphobic (superomniphobic) wettability.