Exposure to respirable silica among clay brick workers in Kathmandu valley, Nepal.

Previous studies report high respirable silica exposures among clay brick workers globally; however, there are little data on exposures among workers in fixed chimney Bull's trench kilns, the predominant kiln type in Kathmandu valley, Nepal. We investigated respirable silica exposures among workers (N = 46) in five similar exposure groups (SEGs). Mean exposures were highest for red brick loading/carrying (331 µg/m3), followed by green brick stacking (223 µg/m3), fireman (102 µg/m3), coal crushing/carrying (92 µg/m3), and green brick molding (71 µg/m3). The average free silica content (13.8%) in the respirable dust fraction was similar to levels reported for clay brick workers employed in other types of kilns. Dust control measures and respiratory protection are recommended, with priority given to workers assigned to red brick loading and stacking and green brick stacking and carrying.

Respiratory symptoms and illnesses related to the concentration of airborne particulate matter among brick kiln workers in Kathmandu valley, Nepal.

BACKGROUND: Bricks have been manufactured in Nepal for hundreds of years and are seen as a component of Nepalese sculpture and architecture. Large quantities of hazardous materials including high concentrations of particulate matter are emitted on a daily basis from brick kilns. Exposure to these hazardous materials can lead to adverse consequences on the environment and human health. This study was conducted to  estimate the prevalence of respiratory symptoms/illnesses and the magnitude of respirable and total dust exposures among Nepalese brick kiln workers. METHODS: Respiratory symptoms/illnesses were evaluated by questionnaire among brickfield workers (n = 400) and a referent group of grocery workers (n = 400) in Kathmandu valley. Work zones (WZs): green brick molding (GBM), green brick stacking/carrying (GBS/C), red brick loading/carrying (RBL/C), coal preparation (CP) and firemen (FM) were the similar exposure groups (SEGs) from where personal air samples and interviews were taken. Among brickfield workers, personal monitoring was conducted across SEGs for total (n = 89) and respirable (n = 72) dust during February-March 2015 and March-April 2016. Applying multi-stage probability proportionate to size sampling technique, 16 kilns and 400 brick workers for interview were selected. Proportions, means, medians and ranges were calculated for the demographics, samples and respiratory symptoms/illnesses. One-way ANOVA was applied to compare the significance differences of the level of particulate matter among SEGs. Bivariate and multivariate logistic regression analysis were performed to evaluate association between respiratory symptoms/illnesses and participants groups, and SEGs among brick kiln workers at 0.05 level. Statistical analyses were performed using IBM SPSS Statistics 21. RESULTS: Chronic cough (14.3%), phlegm (16.6%) and bronchitis (19.0%) were higher (P < 0.05) among brickfield compared with grocery workers (6.8, 5.8 and 10.8%). Mean respirable (5.888 mg/m3) and total (20.657 mg/m3) dust exposures were highest for red brick loading tasks. The prevalence of chronic cough, chronic phlegm, chronic bronchitis, wheezing and asthma were significantly higher for other WZs workers (p < 0.05) compared with CP; for GBM: 22.9, 34.6, 15.0 and 7.5%; for GBS/C: 13.5, 15.8, 10.0, 8.8 and 7.5%; for RBL/C: 11.1, 17.1, 27.4, 19.0 and 11.9%; for FM: 18.4, 12.5, 28.4, 4.9 and 0.0%; and for CP: 4.9, 6.3, 13.3, 9.3 and 4.0% respectively. CONCLUSION: High dust exposures identified in this study may explain the increased prevalence of respiratory symptoms/illnesses among Nepalese brickfield workers, warranting action to reduce exposures.

Load limit of a UASB fed septic tank-treated domestic wastewater.

Performance of a 250 L pilot-scale up-flow anaerobic sludge blanket (UASB) reactor, operated at ambient temperatures, fed septic tank effluents intermittently, was monitored for hydraulic retention time (HRT) from 18 h to 4 h. The total suspended solids (TSS), total chemical oxygen demand (CODT), dissolved chemical oxygen demand (CODdis) and suspended chemical oxygen demand (CODss) removal efficiencies ranged from 20 to 63%, 15 to 56%, 8 to 35% and 22 to 72%, respectively, for the HRT range tested. Above 60% TSS and 47% CODT removal were obtained in the combined septic tank and UASB process. The process established stable UASB treatment at HRT≥6 h, indicating a hydraulic load design limit. The tested septic tank-UASB combined system can be a low-cost and effective on-site sanitation solution.