A class of low-cost alternatives to kifunensine for increasing high mannose N-linked glycosylation for monoclonal antibody production in Chinese hamster ovary cells.

N-linked glycosylation of therapeutic monoclonal antibodies is an important product quality attribute for drug safety and efficacy. An increase in the percent of high mannose N-linked glycosylation may be required for drug efficacy or to match the glycosylation profile of the innovator drug during the development of a biosimilar. In this study, the addition of several chemical additives to a cell culture process resulted in high mannose N-glycans on monoclonal antibodies produced by Chinese hamster ovary (CHO) cells without impacting cell culture performance. The additives, which include known mannosidase inhibitors (kifunensine and deoxymannojirimycin) as well as novel inhibitors (tris, bis-tris, and 1-amino-1-methyl-1,3-propanediol), contain one similar molecular structure: 2-amino-1,3-propanediol, commonly referred to as serinol. The shared chemical structure provides insight into the binding and inhibition of mannosidase in CHO cells. One of the novel inhibitors, tris, is safer compared to kifunensine, 35x as cost-effective, and stable at room temperature. In addition, tris and bis-tris provide multiple low-cost alternatives to kifunensine for manipulating glycosylation in monoclonal antibody production in a cell culture process with minimal impact to productivity or cell health.

Computational insights into O-glycosylation in a CTLA4 Fc-fusion protein linker and its impact on protein quality attributes.

The hinge region of immunoglobulin G1 (IgG1) is used as a common linker for Fc-fusion therapeutic proteins. With the advances of high-resolution mass spectrometry and sample treatment strategies, unexpected O-linked glycosylation has been observed in the linker. However, the molecular mechanism involved in this unusual posttranslational modification is unknown. In this study, we applied site-direct mutagenesis, mass spectrometry, analytical chromatography, and computational modeling to investigate O-glycosylation processes in a clinically used CTLA4 Fc-fusion protein and its impacts on protein quality attributes. Surprisingly, O-glycans could be formed at new sites when an initial O-glycosylation site was eliminated, and continued to occur until all potential O-glycosylation sites were nulled. Site-preference of O-glycosylation initiation was attributed to the complex formation between the linker peptide and glycan transferase whereas the O-glycosylating efficiency and the linker flexibility were correlated using molecular modeling and simulations. As predicted, O-glycan-free CTLA4 Fc-fusion proteins were more homogenous for sialylation, and interestingly less prone to protein aggregation. Attenuating protein aggregation was a desirable effect, and could be related to the reduced presence of linker O-glycans that hindered inter-chain disulfide bond reformation. Findings from this study shed light on new therapeutic protein design and development.

Observations of cell size dynamics under osmotic stress.

Cultured mammalian cells [e.g., murine hybridomas, Chinese hamster ovary (CHO) cells] used to produce therapeutic and diagnostic proteins often exhibit increased specific productivity under osmotic stress. This increase in specific productivity is accompanied by a number of physiological changes, including cell size variation. Investigating the cell size variation of hyperosmotically stressed cultures may reveal, in part, the basis for increased specific productivity as well as an understanding of some of the cellular defense responses that occur under hyperosmotic conditions. The regulation of cell volume is a critical function maintained in animal cells. Although these cells are highly permeable to water, they are significantly less permeable to ionic solutes. Appropriate cell-water content is actively maintained in these cells by regulation of ion and osmolyte balances. Transport appropriate to extracellular conditions, leading to accrual or release of these species, is activated in response to acute cell volume changes. Osmotically induced regulatory volume increases (RVI) and regulatory volume decreases (RVD) are known to occur under a variety of conditions. We observed the time evolution of size variation in populations of two CHO cell lines under hyperosmotic conditions. Observations were made using multiple instruments, multiple cell lines, and multiple cell culture conditions. Size variation of CHO A1 was gauged by flow cytometry using an LSRII® flow cytometer while CHO B0 cells were quantified using a Cedex® cell analyzer. Hyperosmotic stress had a dose-dependent effect on the regulatory control of cell volume. Stressed cultures of CHO cells grown in suspension exhibited a shift in mean cell diameter. This shift in mean was not due to a change in the whole population, but rather to the emergence of distinct subpopulations of cells with larger cell diameters than those in the bulk of the population.

Cell culture and gene transcription effects of copper sulfate on Chinese hamster ovary cells.

This study reports the effects of varying concentrations of copper sulfate on the metabolic and gene transcriptional profile of a recombinant Chinese hamster ovary (CHO) cell line producing an immunoglobulin G (IgG)-fusion protein (B0). Addition of 50 µM copper sulfate significantly decreased lactate accumulation in the cultures while increasing viable cell density and protein titer. These changes could be seen from day 6 and became increasingly evident with culture duration. Reducing the copper sulfate concentration to 5 µM retained all the above beneficial effects, but with the added benefit of reduced levels of the aggregated form of the B0 protein. To profile the cellular changes due to copper sulfate addition at the transcriptional level, Affymetrix® CHO microarrays were used to identify differentially expressed genes related to reduced cellular stresses and facilitated cell cycling. Based on the microarray results, down-regulation of the transferrin receptor and lactate dehydrogenase, and up-regulation of a cytochrome P450 family-2 polypeptide were then confirmed by Western blotting. These results showed that copper played a critical role in cell metabolism and productivity on recombinant CHO cells and highlighted the usefulness of microarray data for better understanding biological responses on medium modification.

Transcriptomic responses to sodium chloride-induced osmotic stress: a study of industrial fed-batch CHO cell cultures.

The rapidly expanding market for monoclonal antibody and Fc-fusion-protein therapeutics has increased interest in improving the productivity of mammalian cell lines, both to alleviate capacity limitations and control the cost of goods. In this study, we evaluated the responses of an industrial CHO cell line producing an Fc-fusion-protein to hyperosmotic stress, a well-known productivity enhancer, and compared them with our previous studies of murine hybridomas (Shen and Sharfstein, Biotechnol Bioeng. 2006;93:132-145). In batch culture studies, cells showed substantially increased specific productivity in response to increased osmolarity as well as significant metabolic changes. However, the final titer showed no substantial increase due to the decrease in viable cell density. In fed batch cultures, hyperosmolarity slightly repressed the cellular growth rate, but no significant change in productivity or final titer was detected. To understand the transcriptional responses to increased osmolarity and relate changes in gene expression to increased productivity and repressed growth, proprietary CHO microarrays were used to monitor the transcription profile changes in response to osmotic stress. A set of osmotically regulated genes was generated and classified by extracting their annotations and functionalities from online databases. The gene list was compared with results previously obtained from similar studies of murine-hybridoma cells. The overall transcriptomic responses of the two cell lines were rather different, although many functional groups were commonly perturbed between them. Building on this study, we anticipate that further analysis will establish connections between productivity and the expression of specific gene(s), thus allowing rational engineering of mammalian cells for higher recombinant-protein productivity.

Effects of culture conditions on N-glycolylneuraminic acid (Neu5Gc) content of a recombinant fusion protein produced in CHO cells.

CHO cells express glycoproteins containing both the N-acetylneuraminic acid (Neu5Ac) and minor amounts of the N-glycolylneuraminic acid (Neu5Gc) forms of sialic acid. As Neu5Gc is not expressed in humans and can be recognized as a foreign epitope, there is the potential for immunogenicity issues for glycoprotein therapeutics. During process development of a glycosylated fusion protein expressed by CHO cells, a number of culture conditions were identified that affected the Neu5Gc content of the recombinant glycoprotein. Sodium butyrate (SB), a well-known additive reported to enhance recombinant protein productivity in specific cases, minimally affected product titers here, but did decrease Neu5Gc levels by 50-62%. A shift in culture temperature to a lower value after the exponential growth phase was used to extend the culture period. It was found that the Neu5Gc levels were 59% lower when the temperature shift occurred later near the stationary phase of the culture compared to an early-temperature shift, near the end of the exponential growth phase. Studies on the effects of pCO(2) with this product showed that the Neu5Gc levels were 46% lower at high pCO(2) conditions (140 mmHg) compared to moderate pCO(2) levels (20-80 mmHg). Finally, a comparison of sodium carbonate versus sodium hydroxide as the base used for pH control resulted in a reproducible 33% decrease in Neu5Gc in bioreactors using sodium hydroxide. These results are of practical importance as SB is a commonly tested additive, and the other factors affecting Neu5Gc can conveniently be used to reduce or control Neu5Gc in processes for the manufacture of glycoprotein therapeutics.

Feed development for fed-batch CHO production process by semisteady state analysis.

Semisteady state cultures are useful for studying cell physiology and facilitating media development. Two semisteady states with a viable cell density of 5.5 million cells/mL were obtained in CHO cell cultures and compared with a fed-batch mode control. In the first semisteady state, the culture was maintained at 5 mM glucose and 0.5 mM glutamine. The second condition had threefold higher concentrations of both nutrients, which led to a 10% increase in lactate production, a 78% increase in ammonia production, and a 30% reduction in cell growth rate. The differences between the two semisteady states indicate that maintaining relatively low levels of glucose and glutamine can reduce the production of lactate and ammonia. Specific amino acid production and consumption indicated further metabolic differences between the two semisteady states and fed-batch mode. The results from this experiment shed light in the feeding strategy for a fed-batch process and feed medium enhancement. The fed-batch process utilizes a feeding strategy whereby the feed added was based on glucose levels in the bioreactor. To evaluate if a fixed feed strategy would improve robustness and process consistency, two alternative feeding strategies were implemented. A constant volume feed of 30% or 40% of the initial culture volume fed over the course of cell culture was evaluated. The results indicate that a constant volumetric-based feed can be more beneficial than a glucose-based feeding strategy. This study demonstrated the applicability of analyzing CHO cultures in semisteady state for feed enhancement and continuous process improvement.

Optimal and consistent protein glycosylation in mammalian cell culture.

In the biopharmaceutical industry, mammalian cell culture systems, especially Chinese hamster ovary (CHO) cells, are predominantly used for the production of therapeutic glycoproteins. Glycosylation is a critical protein quality attribute that can modulate the efficacy of a commercial therapeutic glycoprotein. Obtaining a consistent glycoform profile in production is desired due to regulatory concerns because a molecule can be defined by its carbohydrate structures. An optimal profile may involve a spectrum of product glycans that confers a desired therapeutic efficacy, or a homogeneous glycoform profile that can be systemically screened for. Studies have shown some degree of protein glycosylation control in mammalian cell culture, through cellular, media, and process effects. Studies upon our own bioprocesses to produce fusion proteins and monoclonal antibodies have shown an intricate relationship between these variables and the resulting protein quality. Glycosylation optimization will improve therapeutic efficacy and is an ongoing goal for researchers in academia and industry alike. This review will focus on the advancements made in glycosylation control in a manufacturing process, as well as the next steps in understanding and controlling protein glycosylation.

Hydrogel-perfluorocarbon composite scaffold promotes oxygen transport to immobilized cells.

Cell encapsulation provides cells a three-dimensional structure to mimic physiological conditions and improve cell signaling, proliferation, and tissue organization as compared to monolayer culture. Encapsulation devices often encounter poor mass transport, especially for oxygen, where critical dissolved levels must be met to ensure both cell survival and functionality. To enhance oxygen transport, we utilized perfluorocarbon (PFC) oxygen vectors, specifically perfluorooctyl bromide (PFOB) immobilized in an alginate matrix. Metabolic activity of HepG2 liver cells encapsulated in 1% alginate/10% PFOB composite system was 47-104% higher than alginate systems lacking PFOB. A cubic model was developed to understand the oxygen transport mechanism in the alginate/PFOB composite system. The theoretical flux enhancement in alginate systems containing 10% PFOB was 18% higher than in alginate-only systems. Oxygen uptake rates (OURs) of HepG2 cells were enhanced with 10% PFOB addition under both 20% and 5% O2 boundary conditions, by 8% and 15%, respectively. Model predictions were qualitatively and quantitatively verified with direct experimental OUR measurements using both a perfusion reactor and oxygen sensing plate, demonstrating a greater OUR enhancement under physiological O2 boundary conditions (i.e., 5% O2). Inclusion of PFCs in an encapsulation matrix is a useful strategy for overcoming oxygen limitations and ensuring cell viability and functionality both for large devices (>1 mm) and over extended time periods. Although our results specifically indicate positive enhancements in metabolic activity using the model HepG2 liver system encapsulated in alginate, PFCs could be useful for improving/stabilizing oxygen supply in a wide range of cell types and hydrogels.

Enhancing oxygen tension and cellular function in alginate cell encapsulation devices through the use of perfluorocarbons.

Encapsulation devices are often hindered by the inability to achieve sufficient oxygen levels for sustaining long-term cell survival both in vivo and in vitro. We have investigated the use of synthetic oxygen carriers in alginate gels to improve metabolic activity and viability of HepG2 cells over time. Perfluorocarbons (PFCs), specifically perfluorotributylamine (PFTBA) and perfluorooctylbromide (PFOB), were emulsified with alginate and used to encapsulate HepG2 cells in a spherical geometry. Cellular state was assessed using the MTT assay and Live/Dead stain as well as through analysis of both lactate and lactate dehydrogenase (LDH) levels which are indirect indicators of oxygen availability. Addition of 1% surfactant resulted in stable emulsions with evenly dispersed PFC droplets of the order of 1-2 microm in diameter, with no influence on cell viability. Both PFCs evaluated were effective in increasing cellular metabolic activity over alginate-only gels. The presence of 10% PFOB significantly increased cellular growth rate by 10% and reduced both intracellular LDH and extracellular lactate levels by 20-40%, improving glucose utilization efficiency. The characteristic drop in cellular metabolic activity upon encapsulation was eliminated with addition of 10% PFC and viability was better maintained throughout the bead, with a significant decrease in necrotic core size. Results were consistent under a physiologically relevant 5% oxygen environment. The incorporation of PFC synthetic oxygen carriers into encapsulation matrices has been successfully applied to improve cell function and viability with implication for a variety of tissue engineering applications.

Application of colorimetric assays to assess viability, growth and metabolism of hydrogel-encapsulated cells.

The applicability of the colorimetric 3-(4,5-dimethylthiozol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and lactate dehydrogenase (LDH) assays to measure cell growth and viability in hydrogel encapsulation systems was investigated using HepG2 liver cells encapsulated in alginate matrices. The MTT assay was effective in measuring viable cell density in alginate-encapsulated cell systems, demonstrating less variance and higher throughput capability than hemocytometry. The LDH assay was effective in measuring dead cell density in monolayer cultures and in alginate-encapsulated cells simply by measuring the LDH concentration secreted into the medium. Further validation of these assays was shown in two additional cell lines (rat muscle and mouse embryonic fibroblasts). The MTT and LDH assays are particularly significant in the rapid evaluation of in vitro cell encapsulation device design.

Pluronic F127 as a cell encapsulation material: utilization of membrane-stabilizing agents.

Thermoreversible gelation of the copolymer Pluronic F127 (generic name, poloxamer 407) in water makes it a unique candidate for cell encapsulation applications, either alone or to promote cell seeding and attachment in tissue scaffolds. At concentrations of 15-20% (w/w), aqueous Pluronic F127 (F127) solutions gel at physiological temperatures. The effect of F127 on viability and proliferation of human liver carcinoma cells (HepG2) was determined for both liquid and gel formulations. Cell concentration and viability over a 5-day period were measured by the trypan blue assay via hemocytometry and results were confirmed in both the MTT and LDH assays. With 0.1-5% (w/w) F127 (liquid), cells proliferated and maintained high viability over 5 days. However, at 10% (w/w) F127 (liquid), there was a significant decrease in cell viability and no cell proliferation was evident. HepG2 cell encapsulation in F127 concentrations ranging from 15 to 20% (w/w) (gel) resulted in complete cell death by 5 days. This was also true for the HMEC-1 (endothelial) and L6 (muscle) cell lines evaluated. Cell-seeding density did not affect cell survival or proliferation. Membrane-stabilizing agents (hydrocortisone, glucose, and glycerol) were added to the F127 gel formulations to improve cell viability. The steroid hydrocortisone demonstrated the most significant improvement in viability, from <2% (in F127 alone) to >70% (with 60 nM hydrocortisone added). These results suggest that F127 formulations supplemented with membrane-stabilizing agents can serve as viable cell encapsulation materials. In addition, hydrocortisone may be generally useful in the promotion of cell viability for a wide range of encapsulation materials.