ABSTRACT
Classified information is information of vital importance to the State, which must be protected against disclosure, misuse, damage, unauthorized reproduction, destruction, loss or theft in the interest of the State. At present, there are four levels of classification. For each classification level, precise requirements are laid down for the material of the walls, partitions and ceilings of the rooms in which classified information is stored. Several types of materials are defined for each classification level. The objective of this study was to test and determine whether the different types of materials proposed for the Confidential level meet the same level of resistance. A drop weight test via pendulum was used to determine the resistance. A 50 kg weight was used to break through a 60 × 100 cm sample. The impact of the weight was on the exact center of the sample. The result of the tests was that to break through samples of different materials, large differences in the drop height of the weight were required. The most resistant was the specimen made of reinforced concrete, which required 3 impacts from a height of 80 cm to break through. On the contrary, the least resistant were the specimens made of masonry of autoclaved aerated concrete, where after 2 falls from a height of 5 cm, the sample broke into 2 parts.
ABSTRACT
This work investigates the effect of various sand fractions on the ballistic resistance of ultra-high-performance steel-fibre-reinforced concrete (UHP-SFRC) samples. We specifically investigated replacing expensive and generally inaccessible microsands with commonly available sands. The tests and the measured values show that replacing part of the microsand with the more commonly and economically acceptable 0/2 mm aggregate fraction minimises the resulting mechanical properties and ballistic resistance. The most common type of ammunition was used to test all sample bodies, which is a 7.62 × 39 mm calibre with an all-metal jacket and a mild steel core. The damage's extent and mode were determined using a 3D scanner operating on photogrammetry.
ABSTRACT
This paper deals with the description, measurement, and use of electromagnetic properties of ferromagnetic fibres used as dispersed fibre reinforcement in composite mixtures. Firstly, the fibres' magnetic properties are shown, and a method of measuring the hysteresis loop of fibres is proposed. The results from the measurements are presented and a discussion of the influence of measured parameters on the fibres' orientation in a magnetic field is performed. Furthermore, methods of non-destructive estimation, of their amount and orientation in the composite specimens, are discussed. The main experimental goal of this paper is to show the relationship between this non-destructive method's results and the destructive flexural strength measurements. The method is sensitive enough to provide information related to fibre reinforcement.
