Investigating the hard X-ray production via proton spallation on different materials to detect elements.

Various atomic and nuclear methods use hard (high-energy) X-rays to detect elements. The current study aims to investigate the hard X-ray production rate via high-energy proton beam irradiation of various materials. For which, appropriate conditions for producing X-rays were established. The MCNPX code, based on the Monte Carlo method, was used for simulation. Protons with energies up to 1650 MeV were irradiated on various materials such as carbon, lithium, lead, nickel, salt, and soil, where the resulting X-ray spectra were extracted. The production of X-rays in lead was observed to increase 16 times, with the gain reaching 0.18 as the proton energy increases from 100 MeV to 1650 MeV. Comparatively, salt is a good candidate among the lightweight elements to produce X-rays at a low proton energy of 30 MeV with a production gain of 0.03. Therefore, it is suggested to irradiate the NaCl target with 30 MeV proton to produce X-rays in the 0-2 MeV range.

The application of graphene/h-BN metamaterial in medical linear accelerators for reducing neutron leakage in the treatment room.

Neutrons can be generated in medical linear accelerators (Linac) due to the interaction of high-energy photons (> 10 MeV) with the components of the accelerator head. The generated photoneutrons may penetrate the treatment room if a suitable neutron shield is not used. This causes a biological risk to the patient and occupational workers. The use of appropriate materials in the barriers surrounding the bunker may be effective in preventing the transmission of neutrons from the treatment room to the outside. In addition, neutrons are present in the treatment room due to leakage in the Linac's head. This study aims to reduce the transmission of neutrons from the treatment room by using graphene/hexagonal boron nitride (h-BN) metamaterial as a neutron shielding material. MCNPX code was used to model three layers of graphene/h-BN metamaterial around the target and other components of the linac, and to investigate its effect on the photon spectrum and photoneutrons. Results indicate that the first layer of a graphene/h-BN metamaterial shield around the target improves photon spectrum quality at low energies, whereas the second and third layers have no significant effect. Regarding neutrons, three layers of the metamaterial results in a 50% reduction in the number of neutrons in the air within the treatment room.

Introduction of Graphene/h-BN Metamaterial as Neutron Radiation Shielding by Implementing Monte Carlo Simulation.

In this paper, graphene/h-BN metamaterial was investigated as a new neutron radiation shielding (NRS) material by Monte Carlo N-Particle X version (MCNPX) Transport Code. The graphene/h-BN metamaterial are capable of both thermal and fast neutron moderator and neutron absorber process. The constituent phases in graphene/h-BN metamaterial are chosen to be hexagonal boron nitride (h-BN) and graphene. The introduced target was irradiated by an Am-Be neutron source with an energy spectrum of 100 keV to 15 MeV in a Monte Carlo simulation input file. The resulting current transmission rate (CTR) was investigated by the MCNPX code. Due to concrete's widespread use as a radiation shielding material, the results of this design were also compared with concrete targets. The results show a significant increase in NRS compared to concrete. Therefore, metamaterial with constituent phase's graphene/h-BN can be a suitable alternative to concrete for NRS.