ABSTRACT
New high-performance photocatalytic materials are required to effectively treat water pollution. The effect of annealing temperature on the photocatalytic activities of tin dioxide (SnO2) nanoparticles is investigated in this work. SnO2 nanoparticles are prepared via a hydrothermal method and annealing at various temperatures ranging from as-prepared to 900 °C. The size of SnO2 nanoparticles increases from 4 nm to 10 nm with an increase in annealing temperature. The photocatalytic properties of these nanoparticles are evaluated through the photocatalytic degradation of methylene blue under sunlight. Photocatalytic activities decrease significantly with an increase in annealing temperature due to an increase in size and a decrease in the surface area of SnO2 nanoparticles.
ABSTRACT
For the first time, the BaTiO3 nano-sized particles were obtained through solid-state reaction by employing the titanium oxide nanoparticle. Meanwhile, by using TiO2 with micro-sized particles, the synthesized BaTiO3 shows the micro-sized. The XRD pattern confirms that both BaTiO3 nano-sized and micro-sized particles display the tetragonal structure. Both SEM and TEM analysis revealed that the size of the nano-sized material is in the range of 30-50 nm; in the meantime, the microsized material shows a size of 500 nm. The Eg of both BaTiO3 micro-sized and nano-sized were calculated by using the Kubelka-Munk function. The shifted bandgap of BaTiO3 nano-sized particle is nearly 0.24 eV larger than that of BaTiO3 miro-sized particle due to the particle size effect. The P-E measurement of n-BaTiO3 proved that the obtained BaTiO3 nano-sized is ferroelectric material. The result may provide a new route for the fabrication of barium titanate nanoparticle with ferroelectric properties.
ABSTRACT
Water pollution abatement is a problem in today's society that requires urgent attention. Moreover, photocatalysts are an effective method to treat environmental pollution, and SnO2/reduced graphene oxide composite photocatalysts have been extensively studied in recent years. The synthesis parameters for these photocatalysts significantly affect their morphologies, structures, and properties. In this study, we investigated the effects of annealing temperatures on the properties of SnO2/reduced graphene oxide nanocomposites, which were hydrothermally fabricated at 180 °C for 24 h and annealed at 200 °C-800 °C. The structural characteristics of the fabricated nanocomposites were studied via x-ray diffraction, field emission scanning electron microscopy, and Raman scattering analyses. The observed results indicated that increasing the annealing temperature from 200 °C to 800 °C increased the average SnO2 nanoparticle size from 4.60 nm to 9.27 nm; in addition, the Raman scattering peaks of the SnO2 increased, and those of the reduced graphene oxide significantly decreased as the annealing temperature was increased. Furthermore, the specific surface area of the samples decreased due to the increase in calcination temperature. The amount of reduced graphene oxide content in all the samples was measured using thermo-gravimetric analysis. The optical properties of the samples were studied using ltraviolet-visible absorption spectra, and their photocatalytic activity was evaluated by decomposing methylene blue under visible light using the samples as catalysts. In particular, the photocatalytic properties of nanocomposites decreased significantly with increasing annealing temperature. Among the samples, the photocatalytic activity of that annealed at 200 °C is most satisfactory as it has the smallest particle size and the largest specific surface area. The results of our research could facilitate the production of efficient catalysts with suitable properties.
