Macromolecular Design and Engineering of New Amphiphilic N-Vinylpyrrolidone Terpolymers for Biomedical Applications.

New amphiphilic VP-(di)methacrylate terpolymers of different monomer compositions and topologies have been synthesized by radical polymerization in toluene without any growth regulator of polymer chains. Their structures and properties in solid state and water solution were studied by double-detector size-exclusion chromatography; IR-, 1H, and 13C NMR-spectroscopy; DLS, TEM, TG, and DSC methods. The composition of the VP-AlkMA-TEGDM monomer mixture has been established to regulate the topology of the resulting macromolecules. The studied terpolymers presented on TEM images as individual low-contrast particles and their conglomerates of various sizes with highly ordered regions; in general, they are amorphous structures. None of the terpolymers demonstrated cytotoxic effects for noncancerous Vero and tumor HeLa cells. Hydrophobic D-α-tocopherol (TP) was encapsulated in terpolymer nanoparticles (NPs), and its antioxidant activity was evaluated by ABTS (radical monocation 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulfonic acid)) or DPPH (2,2'-diphenyl-1-picrylhydrazyl) methods. The reaction efficiency depends on the TP-NP type. The IC50 values for the decolorization reaction of ABTS•+ and DPPH inhibition in the presence of initial and encapsulated TP were obtained.

Design and Investigation of New Water-Soluble Forms of α-Tocopherol with Antioxidant and Antiglycation Activity Using Amphiphilic Copolymers of N-Vinylpyrrolidone.

Water-soluble forms of α-tocopherol (TP) as an effective antioxidant were obtained by encapsulating it into nanoparticles (NPs) of amphiphilic copolymers of N-vinylpyrrolidone with triethylene glycol dimethacrylate (CPL1-TP) and N-vinylpyrrolidone with hexyl methacrylate and triethylene glycol dimethacrylate (CPL2-TP) synthesized by radical copolymerization in toluene. The hydrodynamic radii of NPs loaded with TP (3.7 wt% per copolymers) were typically ca. 50 or 80 nm depending on copolymer composition, media, and temperature. Characterization of NPs was accomplished by transmission electron microscopy (TEM), IR-, and 1H NMR spectroscopy. Quantum chemical modeling showed that TP molecules are capable to form hydrogen bonds with donor groups of the copolymer units. High antioxidant activity of both obtained forms of TP has been found by the thiobarbituric acid reactive species and chemiluminescence assays. CPL1-TP and CPL2-TP effectively inhibited the process of spontaneous lipid peroxidation as well as α-tocopherol itself. The IC50 values of luminol chemiluminescence inhibition were determined. Antiglycation activity against vesperlysine and pentosidine-like AGEs of TP water-soluble forms was shown. The developed NPs of TP are promising as materials with antioxidant and antiglycation activity and can be used in various biomedical applications.

Engineering of Numerous Moiré Superlattices in Twisted Multilayer Graphene for Twistronics and Straintronics Applications.

Because of their unique atomic structure, 2D materials are able to create an up-to-date paradigm in fundamental science and technology on the way to engineering the band structure and electronic properties of materials on the nanoscale. One of the simplest methods along this path is the superposition of several 2D nanomaterials while simultaneously specifying the twist angle between adjacent layers (θ), which leads to the emergence of Moiré superlattices. The key challenge in 2D nanoelectronics is to obtain a nanomaterial with numerous Moiré superlattices in addition to a high carrier mobility in a stable and easy-to-fabricate material. Here, we demonstrate the possibility of synthesizing twisted multilayer graphene (tMLG) with a number of monolayers NL = 40-250 and predefined narrow ranges of θ = 3-8°, θ = 11-15°, and θ = 26-30°. A 2D nature of the electron transport is observed in the tMLG, and its carrier mobilities are close to those of twisted bilayer graphene (tBLG) (with θ = 30°) between h-BN layers. We demonstrate an undoubtful presence of numerous Moiré superlattices simultaneously throughout the entire tMLG thickness, while the periods of these superlattices are rather close to each other. This offers a challenge of producing a next generation of devices for nanoelectronics, twistronics, and neuromorphic computing for large data applications.

The Concentration of C(sp3) Atoms and Properties of an Activated Carbon with over 3000 m2/g BET Surface Area.

The alkaline activation of a carbonized graphene oxide/dextrin mixture yielded a carbon-based nanoscale material (AC-TR) with a unique highly porous structure. The BET-estimated specific surface area of the material is 3167 m2/g, which is higher than the specific surface area of a graphene layer. The material has a density of 0.34 g/cm3 and electrical resistivity of 0.25 Ω·cm and its properties were studied using the elemental analysis, transmission electron microscopy (TEM), electron diffraction (ED), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), and electron energy loss spectroscopy (EELS) in the plasmon excitation range. From these data, we derive an integral understanding of the structure of this material. The concentration of sp3 carbon atoms was found to be relatively low with an absolute value that depends on the measurement method. It was shown that there is no graphite-like (002) peak in the electron and X-ray diffraction pattern. The characteristic size of a sp2-domain in the basal plane estimated from the Raman spectra was 7 nm. It was also found that plasmon peaks in the EELS spectrum of AC-TR are downshifted compared to those of graphite.

2D/3D Metallic Nano-objects Self-Organized in an Organic Molecular Thin Film.

We present the fabrication and investigation of the properties of nanocomposite structures consisting of two-dimensional (2D) and three-dimensional (3D) metallic nano-objects self-organized on the surface and inside of organic molecular thin-film copper tetrafluorophthalocyanine (CuPcF4). Metallic atoms, deposited under ultrahigh vacuum (UHV) conditions onto the organic ultrathin film, diffuse along the surface and self-assemble into a system of 2D metallic overlayers. At the same time, the majority of the metal atoms diffuse into the organic matrix and self-organize into 3D nanoparticles (NPs) in a well-defined manner. The evolution of the morphology and electronic properties of such structures as a function of nominal metal content is studied under UHV conditions using transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), and photoelectron spectroscopy (PES) techniques. Using HR-TEM, we have observed the periodicity of atomic planes of individual silver NPs. The steady formation of agglomerates from individual single nanocrystallites with intercrystallite boundaries is observed as well. PES reveals generally weak chemical interactions between silver and the organic matrix and n-doping of CuPcF4 at the initial stages of silver deposition, which is associated with charge transfer from the 2D wetting layer on the basis of core-level spectra shift analysis.

Experimental study of thermal stability of thin nanowires.

Thin (D < 10 nm) nanowires are in principle promising for their application as catalysts and as elements of nanocomputers and quantum devices. To perform these tasks, their structure and properties must be stable at least at standard conditions. Using our technique based on the capture of small particles to the core of quantized vortices in superfluid helium, we synthesized nanowires made of various metals and alloys and investigated their thermal stability. The indium nanowires (D = 8 nm) were shown to be stable when heated to 100 °C, i.e., almost to the melting point, whereas the silver nanowires (D = 5 nm) disintegrated into traces of individual nanoclusters at 300 K. The gold and platinum nanowires also decomposed at temperatures more than twice as low as the melting point. A model is proposed to explain the premature decay of thin nanowires by unfreezing of the surface-atom mobility in combination with the anomalous dependence of the surface tension on the nanowire radius. Methods for improving the stability limits of thin nanowires by saturation of their surface with immobilized atoms as well as by surface oxidation have been proposed and experimentally tested.

Structure and Properties of Platinum, Gold and Mercury Nanowires Grown in Superfluid Helium.

Webs consisting of nanowires made of gold, platinum and mercury were produced by the technique based on laser ablation of metals inside superfluid helium. Their morphology and structure as well as their electrical conductivity have been studied. Diameters of gold and platinum nanowires are 4.5 and 3 nm, respectively. Fortunately, they are close to diameters of nanospheres made of these metals, which, as known from the literature, possess anomalous catalytic activity. Web resistivities for all metals up to room temperature are controlled by conductive electron scattering on a wire surface, thus they are almost independent of T. Nanowires in the webs are electrically interconnected, and therefore the web can be used as a catalyst without any support. Possible advantages of this type of nanocatalyst are outlined.