Development of Direct LDL Measurement by LDL Precipitation Combined with Sandwich ELISA Using In-House-Generated mAbs.

One of the major risk factors for the progression of cardiovascular diseases is a high blood level of low-density lipoprotein (LDL), so progression of the disease may be prevented by lowering the plasma LDL. Evaluation and monitoring of LDL concentrations are therefore necessary. Friedewald's equation is a calculation method that is currently used routinely to estimate plasma LDL concentrations in hospital laboratories. However, this method cannot be applied to samples with a high concentration of triglyceride (TG). To overcome this limitation, this study aimed to develop direct LDL measurements using in-house generated monoclonal antibodies against human LDL in combination with LDL precipitation using heparin-containing citrate buffer pH 5.04. The method was applied to measure the LDL concentration in 208 randomized samples from Suranaree University of Technology Hospital. The mean values obtained from the developed method and the hospital laboratory were 126.6 ± 43.1 mg/dL and 123.2 ± 42.3 mg/dL, respectively. Linear regression analysis showed a high correlation between these two methods (r = 0.8491, p < 0.0001). High concentrations of TG, total cholesterol, and HDL have no influence on the LDL values obtained by this method. In this study, we offer an alternative technique for the direct measurement of plasma LDL. Further development for more convenient and easy use can now be undertaken.

Discrimination between minimally modified LDL and fully oxidized LDL using monoclonal antibodies.

Low density lipoprotein (LDL) can be oxidized in a stepwise process that leads to the production of minimally modified low density lipoprotein (mm-LDL), in which only the lipid component is oxidized, and then of fully oxidized LDL (oxLDL), in which both the lipids and the protein are oxidized. The thiobarbituric acid-reactive substances (TBARS) assay is a recognized method for determination of oxidized LDL, however this method is unable to distinguish between mm-LDL and oxLDL. In this study, seven specific monoclonal antibodies (mAbs) against human LDL were generated and selectively bound to the apolipoprotein B-100 (apoB-100) component of LDL. Oxidized LDL was produced by incubation of human LDL with 10 µM CuSO4 for various times. The TBARS assay revealed that the optimal incubation time to achieve maximal lipid oxidation was 9 h. Indirect ELISA using the newly generated mAbs was implemented to differentiate between mm-LDL and oxLDL and it was found that binding of the mAbs to oxLDL was significantly decreased after 48 h of incubation, reflecting the oxidative modification of apoB-100. Our results suggest that the optimal times for incubation of LDL with CuSO4 for generation of mm-LDL and oxLDL were 9 h and 48 h, respectively.

Roles of a protease from Euphorbia resinifera latex in human anticoagulant and antithrombotic activities.

Thromboembolism is a major cause of morbidity and mortality worldwide. Most therapeutic drugs for treating thrombosis can cause hemorrhage and have short half-lives within human blood circulation resulting in a need to discover and develop novel anticoagulants/antithrombotics. EuRP-61 has been isolated from a plant latex (Euphorbia resinifera) and characterized as a serine protease. In this study, EuRP-61 was able to hydrolyze all chains of human fibrin clots. The enzyme may have long term stability in blood circulation as its fibrinogenolytic activity was not affected by human blood circulating inhibitors such as α2-macroglobulin and antithrombin III. The enzyme may affect the extrinsic, intrinsic or common pathways of the human blood coagulation cascade as evidenced by its prolonged of both prothrombin (PT) and activated partial thromboplastin (APTT) time. Moreover, the enzyme inhibited platelet aggregation via the ADP-receptor pathway. EuRP-61 was not toxic to human red blood cells in the 4 common blood groups (A, B, O and AB) (all Rh+) or human peripheral blood mononuclear cells (hPBMCs). The enzyme may protect human peripheral blood cells from aggregation without destroying them. This study provides evidence that EuRP-61 may have potential as an agent for the treatment of thrombosis.

Drug Release from Polymer Thin Films and Gel Pellets: Insights from Programmed Microplate Electroanalysis.

Robotic electroanalysis in 24-well microplates was used to determine Paracetamol (PCT) release from thin films of chitosan and two pH-sensitive synthetic polymers as well as blends of the polymers with each other and with agarose. Square-wave voltammograms were recorded automatically in a potential window of 0.35 V-0.85 V vs. Ag/AgCl/0.1 M KCl and their evaluation revealed time-dependent PCT release into acidic and basic media. Comparison of the release profiles showed that pure chitosan layers released PCT quickly in a single-phase process while liberation from synthetic polymer thin films was slower with a sigmoidal shape at pH 1.2 and pH 8.0 with a maximum release of PCT after approximately 150 and 140 min, respectively. The release profile from thicker agarose films was between those of the thin films. Agarose blended with chitosan or synthetic polymers formed films with biphasic release behavior. Chitosan linearized the initial section of the release profile in chitosan/polymer blends. The automated procedure for release testing offers the advantage of low-cost, labor-effective and error-free data acquisition. The procedure has been validated as a useful microplate assay option for release profile testing.

Anti-human CD63 monoclonal antibody COS3A upregulates monocyte-induced IL-10 excretion leading to diminution of CD3-mediated T cell response.

Human CD63 has been reported to play a role either as an inhibitor or as a co-stimulator of T- cell responses, although the mechanism of this is unclear. In this study, an anti-human CD63 monoclonal antibody (mAb) COS3A was used to monitor the role of CD63 in T-cell activation. MAb COS3A could inhibit CD3-mediated T-cell proliferation and CD25 expression in peripheral blood mononuclear cells (PBMCs), used as a study model, but the suppressive effect was not observed when purified T-cells were used instead of PBMCs. The inhibitory phenomenon was associated with downregulation of IL-2 and IFN-γ by T-cells, but upregulation of IL-10 by monocytes. Neutralizing IL-10 with anti-IL-10 mAb improved the T-cell response, indicating the role of IL-10 in T-cell suppression. In this study, monocytes were demonstrated to play a role in impeding T-cell activation by the anti-CD63 mAb COS3A. This is the first evidence that anti-CD63 mAb induces IL-10 secretion by monocytes, which later play a role in T-cell hypo-responsiveness.

Amperometric Detection of the Urinary Disease Biomarker p-HPA by Allosteric Modulation of a Redox Polymer-Embedded Bacterial Reductase.

We report an amperometric biosensor for the urinary disease biomarker para-hydroxyphenylacetate ( p-HPA) in which the allosteric reductase component of a bacterial hydroxylase, C1-hpah, is electrically wired to glassy carbon electrodes through incorporation into a low-potential Os-complex modified redox polymer. The proposed biosensing strategy depends on allosteric modulation of C1-hpah by the binding of the enzyme activator and analyte p-HPA, stimulating oxidation of the cofactor NADH. The pronounced concentration-dependence of allosteric C1-hpah modulation in the presence of a constant concentration of NADH allowed sensitive quantification of the target, p-HPA. The specific design of the immobilizing redox polymer with suitably low working potential allowed biosensor operation without the risk of co-oxidation of potentially interfering substances, such as uric acid or ascorbic acid. Optimized sensors were successfully applied for p-HPA determination in artificial urine, with good recovery rates and reproducibility and sub-micromolar detection limits. The proposed application of the allosteric enzyme C1-hpah for p-HPA trace electroanalysis is the first successful example of simple amperometric redox enzyme/redox polymer biosensing in which the analyte acts as an effector, modulating the activity of an immobilized biocatalyst. A general advantage of the concept of allosterically modulated biosensing is its ability to broaden the range of approachable analytes, through the move from substrate to effector detection.

Robotic microplate voltammetry for real-time hydrogel drug release testing.

Robotic square wave voltammetry (SVW) in 24-well microtiter plates has been developed as a reliable non-manual procedure for quantifying drug release from pharmaceutical hydrogels. The assay was established using 1% agarose disks containing Paracetamol® (PCT) as a model preparation. Computerized buffer delivery and SVW in calibration and hydrogel sample wells were performed by a three-electrode arrangement combined with a thin plastic tube. For the glassy carbon working electrode of the assembly the upper limit of the linear response and the lower detection limit of sequential 'in-well' PCT-SVW were 1000 and 0.5 µM, respectively. During non-stop runs through plate wells with equal drug titers the voltammetric PCT signal was stable for at least 6 h. For the construction of drug-release curves with triplicate data points PCT-SVW was performed sequentially on three identical hydrogel samples in neighboring plate wells, preceded and followed by sensor calibrations for response validation. The results showed bi-phasic PCT release profiles exhibiting an initial rapid loss of the drug near the surface of the gel, followed by slowly decelerating release of more deeply buried drug and the dissipation of the concentration gradient that drives diffusion. The proposed automation of voltammetric testing generates reliable hydrogel drug release profiles without the need for operator intervention, avoiding human errors from monotonous manual electroanalysis and releasing skilled staff for other work. This approach is therefore suggested as an economic option for hydrogel dissolution testing in academic or industrial R&D, particularly when the required multi-parameter optimization creates many samples.

Simple and Economical Analytical Voltammetry in 15 µL Volumes: Paracetamol Voltammetry in Blood Serum as a Working Example.

Reported is a three-electrode mini-cell for voltammetry in 15 µL solutions. The key device component is a rolled platinum foil of an inverted omega-shaped cross section, which functions as both the electrolyte container and the counter-electrode. The analytical assembly was completed with properly sized working and reference electrodes in the two terminals of the quasi-tubular Pt trough. Its applicability in electrochemical assays of 15 µL solutions was verified by redox mediator voltammetry at graphite and noble metal sensors and by trace lead stripping voltammetry. Real sample analysis was adequate for drug detection in a volunteer's blood, drawn before and 1 or 4 h after ingestion of paracetamol. In line with its known pharmacokinetics, lack of drug as well as drug presence and clearance were proven correctly in the three samples. The mini-cell here is easy to assemble and operate, indefinitely reusable, and offers valuable economy in chemical usage and minimal waste. This is primarily a versatile device for electrochemical laboratory analysis of samples that are available only in small quantities, and cost-effective quantitative screens for expensive high-molecular-weight compounds, products of microsynthesis, physiological microdialysis collections, and finger-prick blood sampling are seen as feasible targets.

Tuned Amperometric Detection of Reduced ß-Nicotinamide Adenine Dinucleotide by Allosteric Modulation of the Reductase Component of the p-Hydroxyphenylacetate Hydroxylase Immobilized within a Redox Polymer.

We report the fabrication of an amperometric NADH biosensor system that employs an allosterically modulated bacterial reductase in an adapted osmium(III)-complex-modified redox polymer film for analyte quantification. Chains of complexed Os(III) centers along matrix polymer strings make electrical connection between the immobilized redox protein and a graphite electrode disc, transducing enzymatic oxidation of NADH into a biosensor current. Sustainable anodic signaling required (1) a redox polymer with a formal potential that matched the redox switch of the embedded reductase and avoided interfering redox interactions and (2) formation of a cross-linked enzyme/polymer film for stable biocatalyst entrapment. The activity of the chosen reductase is enhanced upon binding of an effector, i.e. p-hydroxy-phenylacetic acid ( p-HPA), allowing the acceleration of the substrate conversion rate on the sensor surface by in situ addition or preincubation with p-HPA. Acceleration of NADH oxidation amplified the response of the biosensor, with a 1.5-fold increase in the sensitivity of analyte detection, compared to operation without the allosteric modulator. Repetitive quantitative testing of solutions of known NADH concentration verified the performance in terms of reliability and analyte recovery. We herewith established the use of allosteric enzyme modulation and redox polymer-based enzyme electrode wiring for substrate biosensing, a concept that may be applicable to other allosteric enzymes.

Biochemical and functional analysis of COS3A, a novel CD63-specific monoclonal antibody.

BACKGROUND: Monoclonal antibodies (mAbs) have become essential tools in life science research and in medicine, because of their extreme specificity. Several mAbs against leukocyte surface molecules have been generated in our laboratory. From these, mAb COS3A was selected for biochemical and functional analysis. OBJECTIVE: To analyze the properties and function of the mAb COS3A. METHOD: Cellular distribution was analyzed by immunofluorescence staining and flow cytometry. Biochemical characterization of the molecular target of COS3A was approached by immunoprecipitation, Western blotting and amino acid sequencing using LC-MS. N-glycosidase F treatment of COS3A-precipitated protein and culture of U937 cells in the presence of tunicamycin before cell lysate preparation were used to study the glycosylation state of proteins. Phagocytosis was examined by flow cytometry. RESULTS: MAb COS3A bound specifically to a molecule expressed on the surface of various human hematopoietic cells and cell lines but not on erythrocytes. The antigen had a molecular weight of 30-70 kDa, which was reduced to 25 kDa by elimination of N-linked glycan. LC-MS data and immunoprecipitation indicated that mAb COS3A bound specifically to the CD63 molecule. Remarkably, functional analysis demonstrated that mAb COS3A dramatically reduced granulocyte phagocytosis. CONCLUSIONS: The mAb COS3A recognized the CD63 molecule and strongly diminished granulocyte phagocytosis of E. coli, suggesting that CD63 may play a crucial role in the initial step of phagocytosis. MAb COS3A is, therefore, suitable for both biochemical and functional studies of CD63, and may be used for further study of the mechanism of phagocytosis and also in therapeutic approaches.

Electrochemical detection of the disease marker human chitinase-3-like protein 1 by matching antibody-modified gold electrodes as label-free immunosensors.

Tissue inflammation, certain cardiovascular syndromes and the occurrence of some solid tumors are correlated with raised serum concentrations of human chitinase-3-like protein 1 (YKL-40), a mammalian chitinase-like glycoprotein, which has become the subject of current research. Here we report the construction and characterization of an electrochemical platform for label-free immunosensing of YKL-40. Details of the synthesis of YKL-40 and production of anti-YKL-40 immunoglobulin G (IgG) are provided and cross-reactivity tests presented. Polyclonal anti-YKL-40 IgG was immobilized on gold electrodes and the resulting immunosensors were operated in an electrochemical flow system with capacitive signal generation. The strategy offered a wide linear detection range (0.1µg/L to 1mg/L) with correlation coefficients (R(2)) above 0.99 and good sensitivity (12.28±0.27nF/cm(2) per decade of concentration change). Additionally, the detection limit of 0.07±0.01µg/L was well below that of optical enzyme-linked immunosorbent assays (ELISAs), which makes the proposed methodology a promising alternative for YKL-40 related disease studies.

Human cartilage chitinase 3-like protein 2: cloning, expression, and production of polyclonal and monoclonal antibodies for osteoarthritis detection and identification of potential binding partners.

Human cartilage chitinase 3-like protein 2 (CHI3L2 or YKL-39) is a member of family-18 glycosyl hydrolases that lacks chitinase activity. YKL-39 is known as a potential marker for the activation of chondrocytes and the progression of osteoarthritis. In this study, we cloned and expressed a functional form of human YKL-39 in the bacterial system. The Escherichia coli expressed YKL-30 was used as immugen for production of anti YKL-39 polyclonal and monoclonal antibodies. Both antibody types were highly selective, reacting only with YKL-39. Isotype mapping identified two hybridoma clones (so called clones 6H11 and 8H3) to be IgM isotype. Dot blot assay showed that the monoclonal antibody was strongly active with the synovial fluid of an osteoarthritis patient, human monocyte, and T lymphocyte cell lines. Database search for protein binding partners gave high hits with several glycoproteins that play particular roles in cartilage tissue scaffolding, connective tissue formation, and cell-cell interactions. In conclusion, anti YKL-39 polyclonal and monoclonal antibodies were raised and tested to be suitable for immunological applications, such as the investigation of the YKL-39 regulating pathway and the development of an immunosensing tool for sensitive detection of cartilage tissue destruction.

The outer membrane protein VhOmp of Vibrio harveyi: pore-forming properties in black lipid membranes.

Vibrio harveyi is known to cause fatal vibriosis in marine animals. Here, an outer membrane protein from V. harveyi, namely, VhOmp, was isolated and functionally characterized in terms of pore-forming contact with artificial lipid membranes. The native VhOmp exists as a trimer of a molecular weight similar to that of the porin OmpF from Escherichia coli. Reconstitution of VhOmp into black lipid membranes demonstrated its ability to form ion channels. The average pore conductance of VhOmp was revealed to be about 0.9 and 2 nS in 0.2 and 1 M KCl, respectively. Within transmembrane potentials of +/-100 mV, VhOmp pores behaved as ohmic conduits, and their conductance scaled linearly with voltage. Nonlinear plots of the pore conductance versus symmetrical salt concentrations at either side of the protein-incorporating membrane suggested the influence of interior channel functionalities on the passage of charged species. In the presence of Omp-specific polyclonal antibodies, the pore-forming property of VhOmp was modulated so that the usual step-like current increments were replaced by random transitory current fluctuations. VhOmp exhibited a strong biological activity by causing hemolysis of human red blood cells, indicating that VhOmp may act as a crucial determinant during bacterial infection to animal host cells.

Potent inhibition of OKT3-induced T cell proliferation and suppression of CD147 cell surface expression in HeLa cells by scFv-M6-1B9.

CD147, a multifunctional type I transmembrane glycoprotein, has been implicated in various physiological and pathological processes. It is involved in signal transduction pathways and also plays a crucial role in the invasive and metastatic activity of malignant tumor cells. Diminished expression of this molecule has been shown to be beneficial in suppression of tumor progression. In a previous study, we generated and characterized a recombinant antibody fragment, scFv, which reacted specifically to CD147. In the present study, we further investigated the biological properties, function and the effect of generated scFv on CD147 expression. The in vitro study showed that soluble scFv-M6-1B9 produced from E. coli HB2151 bound to CD147 surface molecule and inhibited OKT3-induced T cell proliferation. Furthermore, soluble lysate of scFv-M6-1B9 from 293A cells, transduced with a scFv-M6-1B9 expressing adenovirus vector, recognized both recombinant and native CD147. These results indicate that scFv-M6-1B9 binds with high efficiency and specificity. Importantly, scFv-M6-1B9 intrabody reduced the expression of CD147 on the cell surface of HeLa cells suggesting that scFv-M6-1B9 is biologically active. In conclusion, our present study demonstrated that scFv-M6-1B9 has a great potential to target both the intracellular and the extracellular CD147. The generated scFv-M6-1B9 may be an effective agent to clarify the cellular function of CD147 and may aid in efforts to develop a novel treatment in various human carcinomas.

LFA-1-mediated leukocyte adhesion regulated by interaction of CD43 with LFA-1 and CD147.

The activity of the lymphocyte-function associated antigen 1 (LFA-1; CD11a/CD18) must be tightly controlled during the onset of cellular immunity. It is well known that the sialoglycoprotein CD43 can influence LFA-1-mediated cell adhesion in an either anti- or pro-adhesive manner through mechanisms not well understood. By using a yeast-2-hybrid screen and co-immunoprecipitation we identified physical association of CD43 with two novel partners, LFA-1 itself and the Ig-family member CD147 (EMMPRIN, basigin), and characterized how these interactions are involved in LFA-1-mediated cell adhesion. Monoclonal antibodies (mAbs) to both CD43 and CD147 induced similar homotypic cell aggregation and adhesion of Jurkat T cells and U937 myeloid cells. Both CD43 and CD147 mAbs induced dynamic co-capping of LFA-1 together with the CD43 and the CD147 molecule to cell contact zones. However, in contrast to CD43, we were not able to co-immunoprecipitate LFA-1 with CD147, which indicates that CD43 interacts with CD147 and LFA-1 in two distinct but similarly reorganized complexes. Co-transfection of CD43 interfered with the CD147-induced cell adhesion and aggregation, and siRNA-mediated knock down of CD43 in human T cells resulted in enhanced LFA-1 activation induced via CD147 and also the T cell antigen receptor. These results indicate that triggering CD43 and the underlying signaling pathways enhance LFA-1 adhesiveness while CD43 also negatively regulates LFA-1 induction via other receptors by dynamic interaction with either LFA-1 or CD147.

Production, characterization, and functional analysis of newly established CD99 monoclonal antibodies MT99/1 and MT99/2.

The leukocyte surface molecule CD99 is an integral membrane glycoprotein encoded by the E2/MIC2 gene. This molecule is broadly expressed on cells of the hematopoietic system and displays two surface forms, a long 32 kDa form and a short 28 kDa form. While the complete function of the CD99 molecule is unclear, it has been reported to be involved in regulation of cell adhesion, migration, and apoptosis. Thus, several CD99 monoclonal antibodies (MAbs) have been generated for biochemical and functional studies of the CD99 molecule. In the present study two CD99 MAbs, MT99/1 and MT99/2, were produced. The MAbs recognized different epitopes of the CD99 molecule. MAb MT99/1, but not MT99/2, was appropriate for biochemical characterization. Binding of MAb MT99/1 with its epitope led to the induction of cell adhesion and apoptosis. The generated MAbs can be used for future study of the function and mechanism of the CD99 molecule, including its role in the immune system, and may have application in tumor diagnosis and treatment.

CD147 contains different bioactive epitopes involving the regulation of cell adhesion and lymphocyte activation.

CD147 is a leukocyte surface molecule which belongs to the immunoglobulin superfamily. It is broadly expressed on various cell types and is a lymphocyte activation-associated molecule. In order to study the function of CD147, five CD147 monoclonal antibodies (mAbs) were generated: M6-2F9; M6-1D4; M6-1F3; M6-1B9; and M6-1E9. Biochemical characterizations and cross-blocking experiments indicated that M6-1B9 and M6-1E9 recognize the same or contiguous epitopes on CD147. By employing COS transfectants expressing CD147 membrane-distal domain (domain 1) and membrane-proximal domain (domain 2), mAbs M6-2F9, M6-1D4, M6-1B9, and M6-1E9 were shown to recognize epitopes located on domain 1 of the molecule. Functional studies indicated that engagement of CD147 by mAbs M6-1B9 and M6-1E9 strongly inhibited lymphocyte proliferation induced by a CD3 mAb. In contrast, mAbs M6-2F9, M6-1D4, and M6-1F3 induced U937 homotypic cell aggregation. The results indicate that CD147 contains at least two bioactive domains. Epitopes responsible for induction of cell aggregation are different from those regulating lymphocyte activation.

Engagement of Na,K-ATPase beta3 subunit by a specific mAb suppresses T and B lymphocyte activation.

In order to identify new molecules involved in regulation of T cell proliferation, we generated various mAb by immunization of mice with the T cell line Molt4. We found one mAb (termed P-3E10) that down-regulated the in vitro T cell proliferation induced by CD3-specific OKT3 mAb. The P-3E10 mAb was also able to inhibit IFN-gamma, IL-2, IL-4 and IL-10 production of OKT3-activated T cells. The antigen recognized by P-3E10 mAb is broadly expressed on all hematopoietic as well as on all non-hematopoietic cell lines tested so far. Within peripheral blood leukocytes, the P-3E10 antigen was detected on lymphocytes, monocytes and granulocytes. Human umbilical vein endothelial cells (HUVEC) also scored positively. By evaluating the effect of P-3E10 mAb on these cell types we found that it also inhibited anti-IgM-induced B cell proliferation. However, it did not block growth factor-mediated proliferation of HUVEC, and spontaneous proliferation of SupT-1, Jurkat, Molt4 and U937 cell lines. Moreover, it did not influence phagocytosis of human blood monocytes and granulocytes. Biochemical analysis revealed that the P-3E10 antigen is a protein with a mol. wt of 45-50 kDa under non-reducing and 50-55 kDa under reducing conditions. By using a retroviral cloning system, the P-3E10 antigen was cloned. Sequence analysis revealed the P-3E10 antigen to be identical to the beta3 subunit of the Na,K-ATPase.