Nondestructive Monitoring of the Dispersion State of Titanium Dioxide Nanoparticles in Concentrated Suspensions Using Magnetic Resonance Imaging.

The purpose of the present study is to demonstrate the applicability of magnetic resonance imaging, especially T2 relaxation time mapping, for nondestructive monitoring of the dispersion state of nanoparticles (NPs) in concentrated suspensions. TiO2 15-nm-diameter NPs, for use in sunscreen lotion products, were examined as a test NP. First, this study investigated whether T2 is sensitive to the NP concentration. In experiments with pulsed nuclear magnetic resonance on TiO2 NP suspensions with different organic solvents (ethanol, acetone, and decamethylcyclopentasiloxane), the T2 of each solvent varied in the suspensions according to the NP concentration. This study also confirmed that T2 mapping was effective for visualizing differences in NP concentration. Subsequently, gravitational sedimentation of the test suspensions was investigated. T2 mapping exhibited better detection sensitivity to sedimentation occurring in concentrated suspensions than visual observation, as it enabled the detection of changes in NP distributions that could not be visible to the naked eye. In addition, measurements of backscattered light enabled the full understanding of the dispersion stability of the TiO2 NPs in each solvent. Finally, the present study evaluated the centrifuge sedimentation of a commercial TiO2 NP suspension. T2 mapping clearly showed the complicated sedimentation behavior induced by the centrifugation treatment. The simulated fluid flow was consistent with the particle distribution in the centrifuged sample; thus, the sedimentation was believed to have developed in accordance with the vorticity generated by the centrifugation.

Self-organizing Map Analysis for Understanding Comprehensive Relationships between Formulation Variables, State of Water, and the Physical Stability of Pharmaceutical Emulsions.

The physical stability of pharmaceutical emulsions is an important quality attribute to be considered. To obtain a better understanding of this issue, this study investigated the contribution of the state of water to the physical stability of pharmaceutical emulsions. The key technology to evaluate the state of water was magnetic resonance imaging (MRI). For sample preparation, model emulsions with different formulation variables (surfactant content, water content, and hydrophilic-lipophilic balance) were prepared. The T1 relaxation time, diffusion coefficient, and viscosity were measured as physical properties. The physical stability of the samples was evaluated using apparent diffusion coefficient maps acquired by MRI. Data analysis of the observed data was performed using the nonlinear response surface method and Kohonen's self-organizing map (SOM). It was determined that, depending on the formulation variables, the state of water was substantially changed and it played a significant role in the physical stability. SOM analysis successfully classified the conditions of formulation variables into four distinct clusters in terms of the similarity of the physical properties of the resultant emulsions, and then clarified the characteristics of the stable emulsions. This study provided us with a comprehensive understanding of the formulation variables, physical properties, and stability concerning the preparation of the model emulsion.

Supersaturated state of diazepam injection following dilution with infusion fluid.

BACKGROUND: Significant precipitation produced by the dilution of diazepam (DZP) injection with an infusion fluid is a great concern for the clinical practice. In this study, the precipitation behavior under different conditions was investigated. METHOD: For the sample preparation, DZP injections (Horizon injection and Cercine injection) were diluted with various infusion fluids (Saline, 5% glucose infusion fluid and Soldem 3A) at designated dilution ratios ranging from 1× to 40× (5 mg/mL to 0.125 mg/mL). In addition, to measure the solubility of DZP in the samples, the saturated solutions of DZP were prepared. The DZP concentrations in the samples were measured by high-performance liquid chromatography (HPLC). This study also investigated the precipitate using various analytical methods: infrared microscopy, (1)H-NMR, differential scanning calorimetry, and powder X-ray deflection. RESULTS: First, the compatibility of injection with infusion fluids was investigated. Significant precipitation occurred at dilution ratios ranging from 2× to 20×. No significant effects of formulations and infusion fluids on the compatibility were observed. The solubility of DZP was then further investigated. The concentration of DZP dissolved in the admixtures was higher than the solubility. This indicated that DZP existed in a supersaturated state in the infusion fluid admixtures. In the next phase of this study, the precipitate was investigated using various analytical methods. Results showed that the precipitate in infusion fluid admixtures was mostly composed of DZP, but also contained small amounts of the ingredients of DZP injection, such as benzoic acid and benzyl alcohol. CONCLUSIONS: This study clarified details of the precipitation occurring after dilution of DZP injection with infusion fluids. It is worth noting that DZP in an infusion admixture existed in a supersaturated state. These findings offer important insight into the clinical practice of DZP injection.

Study of the contribution of the state of water to the gel properties of a photocrosslinked polyacrylic acid hydrogel using magnetic resonance imaging.

Photocrosslinked polyacrylic acid (PAA-HEMA) hydrogels are a promising candidate for use in dermatological patch adhesives. To gain further knowledge about the properties of this gel, we investigated the T1 relaxation time and the diffusion coefficient (D) of water in the hydrogels using magnetic resonance (MR) imaging. Hydrogels with different formulations and process factors were prepared and tested. The observed data were analyzed by ANOVA, which clarified the mode of action of the formulation and process factors based on these MR parameters. Various gel properties (i.e., gel fraction, swelling capacity, gel strength, and water-retention ability) were also measured, followed by a Bayesian network (BN) analysis. The BN allowed us to summarize well the relationships between the formulation and process factors, MR parameters, and gel properties. T1 was associated with the swelling and water-retention properties of the hydrogel, whereas D was associated with gel formation and gel strength. Furthermore, this study clarified that T1 and D mostly represented the hydration and water-compartmentalization effects of the hydrogel, respectively. In conclusion, the state of water seems to play an important role in the properties of the PAA-HEMA hydrogel.