Epoxidation of Argemone mexicana oil with peroxyacetic acid formed in-situ using sulfated tin (IV) oxide catalyst: Characterization; kinetic and thermodynamic analysis.

In this study, sulfated tin (IV) oxide solid acid catalyst was prepared for the epoxidation of Argemone mexicana oil (AMO) with peroxyacetic acid formed in-situ. The catalyst was synthesized using the chemical co-precipitation method and characterized. The effects of various epoxidation parameters on ethylenic double bond conversion (%) and oxygen ring content were analyzed. The maximum ethylenic double bond conversion of 95.5% and epoxy oxygen content of 6.25 was found at the molar ratio of AMO to 30% of H2O2 = 1:2.5, molar ratio of AMO to acetic acid = 1:1.5, catalyst concentration = 12.5%, and reaction temperature = 70 °C at reaction time = 6 h. The kinetic and thermodynamic features of the epoxidation of AMO were also analyzed with appropriate models. The results of the kinetic study of the epoxidation reaction followed pseudo first order with the activation energy = 0.47.03 kJ/mol. Moreover, the thermodynamic constants of epoxidation of AMO were found as ΔH = 44.18 kJ/mol, ΔS = -137.91 Jmol-1k-1) and ΔG = 91.12 kJ/mol. The epoxidized product of AMO was further analyzed using FTIR, 1H NMR, and 13C NMR. The results of these analyses confirmed the successful conversion of the ethylenic double bond in the AMO to EAMO.

Utilization of Cactus Peel as Biosorbent for the Removal of Reactive Dyes from Textile Dye Effluents.

Textile industries generate large quantities of dye containing wastewater which pose a serious environmental problem. Currently, biosorbents have become desirable for the removal of dyes from textile effluents. In this study, batch experiments were conducted to investigate the biosorption characteristics of cactus peel on the removal of reactive red dye from aqueous solutions. The effects of solution pH, biosorbent dosage, contact time, and initial concentration were studied. The interaction effects of process variables were analysed using response surface methodology. The results showed that removal efficiency increased as initial dye concentration and solution pH decreased and as biosorbent dosage and contact time increased. The highest removal efficiency (99.43%) was achieved at solution pH, initial dye concentration, biosorbent dose, and contact time of 3.0, 40 mg/l, 6 g, and 120 min, respectively. From regression analysis, the Langmuir isotherm was found to better (R 2 = 0.9935) represent the biosorption process as compared with the Freundlich isotherm (R 2 = 0.9722). Similarly, the pseudo-second-order model was seen to represent very well the biosorption kinetics. The results show that cactus peel has good potential for the removal of reactive red dye.

Characterization of crop residues from false banana /Ensete ventricosum/ in Ethiopia in view of a full-resource valorization.

False banana /Ensete ventricosum [Welw.] Cheesman/ is exploited as a food crop in Ethiopia where it represents an important staple food. The plant is harvested and large amounts of biomass residues are originated, mainly from the pseudo stem (i.e., fiber bundles obtained from the leaf sheaths after being scrapped to produce starchy food) and the inflorescence stalk. These materials were studied in relation to their summative chemical composition, composition of lignin, lipophilic and polar extracts. Moreover, their structural characteristics, in view of their valorization, were scrutinized. The analytical studies were performed with the aid of FTIR, GC/MS, Py-GC/MS and SEM. The fiber bundles are aggregates of mainly long and slender fibers with low ash, extractives and lignin contents (3.8%. 4.4% and 10.5% respectively) and high holocellulose and α-cellulose contents (87.5% and 59.6% respectively). The hemicelluloses in the fibers are mostly highly acetylated xylans and the lignin is of the H-type (H:G:S, 1:0.7:0.8). This lignin composition is in line with the FTIR peaks at 1670 cm-1 and 1250 cm-1.The inflorescence stalk has high ash content (12.3% in the main stalk and 24.6% in fines) with a major proportion of potassium, high extractives (25.9%), and low lignin and α-cellulose contents (5.8% and 17.9% respectively). The stalk includes numerous starch granules in the cellular structure with the predominant presence of parenchyma. The potential valorization routes for these materials are clearly different. The fiber bundles could be used as a fiber source for paper pulp production with the possibility of a prior hemicelluloses removal while the inflorescence stalk has nutritional value for food and fodder. Furthermore, it can also be used for sugar fermentation products.