Reversibly Controlled Ternary Polar States and Ferroelectric Bias Promoted by Boosting Square-Tensile-Strain.

Interaction between dipoles often emerges intriguing physical phenomena, such as exchange bias in the magnetic heterostructures and magnetoelectric effect in multiferroics, which lead to advances in multifunctional heterostructures. However, the defect-dipole tends to be considered the undesired to deteriorate the electronic functionality. Here, deterministic switching between the ferroelectric and the pinched states by exploiting a new substrate of cubic perovskite, BaZrO3 is reported, which boosts the square-tensile-strain to BaTiO3 and promotes four-variants in-plane spontaneous polarization with oxygen vacancy creation. First-principles calculations propose a complex of an oxygen vacancy and two Ti3+ ions coins a charge-neutral defect-dipole. Cooperative control of the defect-dipole and the spontaneous polarization reveals ternary in-plane polar states characterized by biased/pinched hysteresis loops. Furthermore, it is experimentally demonstrated that three electrically controlled polar-ordering states lead to switchable and nonvolatile dielectric states for application of nondestructive electro-dielectric memory. This discovery opens a new route to develop functional materials via manipulating defect-dipoles and offers a novel platform to advance heteroepitaxy beyond the prevalent perovskite substrates.

Addition of Cellulose Nanofibers to Control Surface Roughness for Hydrophobic Ceramic Coatings.

Hydrophobic ceramic coatings are used for a variety of applications. Generally, hydrophobic coating surfaces are obtained by reducing the surface energy of the coating material or by forming a highly textured surface. Reducing the surface energy of the coating material requires additional costs and processing and changes the surface properties of the ceramic coating. In this study, we introduce a simple method to improve the hydrophobicity of ceramic coatings by implementing a textured surface without chemical modification of the surface. The ceramic coating solution was first prepared by adding cellulose nanofibers (CNFs) and then applied to a polypropylene (PP) substrate. The surface roughness increased as the amount of added CNFs increased, increasing the water contact angle of the surface. When the amount of CNFs added was corresponding to 10% of the solid content, the surface roughness average of the area was 43.8 µm. This is an increase of approximately 140% from 3.1 µm (the value of the surface roughness of the surface without added CNFs). In addition, the water contact angle of the coating with added CNF increased to 145.0°, which was 46% higher than that without the CNFs. The hydrophobicity of ceramic coatings with added CNFs was better because of changes in the surface topography. After coating and drying, the CNFs randomly accumulated inside the ceramic coating layer, forming a textured surface. Thus, hydrophobicity was improved by implementing a rugged ceramic surface without revealing the surface of the CNFs inside the ceramic layer.

Enhanced Interfacial Adhesion of Polydimethylsiloxane (PDMS) by Control of the Crosslink Density.

In this paper, we report a simple, fast, and one-step approach to improve the adhesion force of polydimethylsiloxane (PDMS) by incorporating inorganic nanoparticles that can control the physical, mechanical, and adhesion properties of the PDMS. An organic/inorganic PDMS-based composite was fabricated by the hydrosilylation of vinyl-decorated silica nanoparticles (v-SNPs) and the PDMS. The v-SNP/PDMS composite showed a significantly decreased elastic modulus and increased elongation compared with that of pristine SNPs incorporated with the PDMS composite (SNP/PDMS) and pristine PDMS. Furthermore, the v-SNP/PDMS composite exhibited a low glass-transition temperature and sharp crystallization and melting peaks in the differential scanning calorimetry curve compared with those of pristine PDMS and the SNP/PDMS composite. Moreover, the v-SNP/PDMS composite showed a high swelling ratio and crosslinked molecular weight and low gel fraction. These results may originate from the suppression of the PDMS-curing networks as the addition of the v-SNPs creates a low curing density because of the chemical bonding between PDMS and the v-SNPs. Finally, the v-SNP/PDMS composite showed an improvement of ~426% in the adhesion force compared with pristine PDMS and the SNP/PDMS composite. We anticipate that this v-SNP/PDMS composite could be used as a highly adhesive and hydrophobic coating material for various applications in industry.