Evaluation of Nitrogen Oxide Reduction Performance in Permeable Concrete Surfaces Treated with a TiO2 Photocatalyst.

Fine dust, recently classified as a carcinogen, has raised concerns about the health effects of air pollution. Vehicle emissions, particularly nitrogen oxide (NOx), contribute to ultrafine dust formation as a fine dust precursor. A photocatalyst, such as titanium dioxide (TiO2), is a material that causes a catalytic reaction when exposed to light, has exceptional characteristics such as decomposition of pollutants, and can be used permanently. This study aimed to investigate NOx reduction performance by developing ecofriendly permeable concrete with photocatalytic treatment to reduce fine dust generated from road mobile pollution sources. Permeable concrete specimens containing an activated loess and zeolite admixture were prepared and subjected to mechanical and durability tests. All specimens, including the control (CTRL) and admixture, met quality standard SPS-F-KSPIC-001-2006 for road pavement. Slip resistance and permeability coefficient also satisfied the standards, while freeze-thaw evaluation criteria were met only by CTRL and A1Z1 specimens. NOx reduction performance of the permeable concrete treated with TiO2 photocatalyst was assessed using ISO standard and tank chambers. NOx reduction efficiency of up to 77.5% was confirmed in the permeable concrete specimen with TiO2 content of 7.5%. Nitrate concentration measurements indirectly confirmed photolysis of nitrogen oxide. Incorporating TiO2 in construction materials such as roads and sidewalks can improve the atmospheric environment for pedestrians near roads by reducing NOx levels through photocatalysis.

Evaluation of the NOx Reduction Performance of Mortars Containing Zeolite/Activated Red Clay Coated with a TiO2 Photocatalyst.

Globally, there is a growing concern about air pollution due to rapid industrialization and urbanization. Therefore, in this study, an experimental study was conducted to evaluate the performance of reducing nitrogen oxides, a precursor to fine dust, in mortars coated with a titanium dioxide (TiO2) photocatalyst, which has the effect of decomposing pollutants. In particular, in this study, zeolite and activated red clay were used as cement substitutes to improve the fine dust reduction performance of the TiO2 photocatalyst. A total of 14 different mixtures were designed, considering the substitution rates of zeolite and activated red clay (30%, 40%, and 50%) and the cement-fine aggregate ratio (1:2 and 1:3) as experimental variables. A TiO2 photocatalyst was employed in this study to evaluate the NOx reduction performance. As zeolite and activated red clay were added, the compressive strength and flexural strength of the mortars decreased by 15% to 60%, while the absorption rate increased by 5% to 16%. The NOx reduction efficiency of up to 67.4% was confirmed in the H50-3 specimen with the TiO2 catalyst. The NOx reduction performance of mortars with the TiO2 photocatalyst sprayed on their surface improved as the substitution ratio of zeolite and activated red clay increased. Additionally, it was confirmed that the NOx reduction effect of specimens using activated red clay was superior to those using zeolite. Therefore, through this study, it was confirmed that the NOx reduction performance of the TiO2 photocatalyst can be improved when zeolite and activated red clay are used as cement substitutes.

Paper-Based Substrate for a Surface-Enhanced Raman Spectroscopy Biosensing Platform-A Silver/Chitosan Nanocomposite Approach.

Paper is a popular platform material in all areas of sensor research due to its porosity, large surface area, and biodegradability, to name but a few. Many paper-based nanocomposites have been reported in the last decade as novel substrates for surface-enhanced Raman spectroscopy (SERS). However, there are still limiting factors, like the low density of hot spots or loss of wettability. Herein, we designed a process to fabricate a silver-chitosan nanocomposite layer on paper celluloses by a layer-by-layer method and pH-triggered chitosan assembly. Under microscopic observation, the resulting material showed a nanoporous structure, and silver nanoparticles were anchored evenly over the nanocomposite layer. In SERS measurement, the detection limit of 4-aminothiophenol was 5.13 ppb. Furthermore, its mechanical property and a strategy toward further biosensing approaches were investigated.

Paper-Based Diagnostic System Facilitating Escherichia coli Assessments by Duplex Coloration.

Laboratory support for low-resource regions is a rising global issue. As microbiological contamination is closely associated with other issues like food safety, water supply sustainability, and public health, bacterial assessments in this setting need to be improved. Herein, we demonstrate a paper-based diagnostic device for point-of-need testing, in which fecal-indicating Escherichia coli and highly pathogenic E. coli are detected by duplex coloration. This device was functionalized by mixing different chromogenic substrates that reflect each bacterial enzymatic phenotype. In the final part of the paper, we describe this microbiological diagnostic system tested with bacteria-contaminated food samples. The device sensitivity was shown to have greatly reduced the total analysis time (below to 4 h) when combined with an enrichment amplification procedure. Notably, this paper device successfully detected 10 cfu/mL of target bacteria in a contaminated milk sample. Our diagnostic system shows acceptable accuracy, short analysis time, and a user-friendly interface, thereby eliminating demands for high-end equipment and a highly trained staff. We expect that this diagnostic system will be a sustainable solution in supporting microbiological or clinical laboratories in low-income countries.

One-step sensing of foodborne pathogenic bacteria using a 3D paper-based device.

Managing food contamination from bacteria has been an ongoing issue in the public health and industrial fields. Enzymatic substrates possessing optical properties, e.g. fluorescence or color manifestation, are widely exploited in pathogenic/non-pathogenic bacteria culture methods. Recently, various chromogenic substrates have been utilized in the development of point-of-care diagnostic tools. Herein, four types of chromogenic substrates were exploited to develop paper-based sensors for major foodborne pathogens. We designed a compact sized three-dimensional paper device with a simple user interface. By inserting functional layers in the middle of multilayers, pre-lysis and pH regulation steps were excluded and the analysis time was subsequently reduced, while only one sample droplet was needed for the whole analysis process. After the enzymatic reactions had proceeded, target-specific colors appeared. When it was combined with enrichment, 101 cfu mL-1 of pathogens were successfully detected in 4-8 hours, while those in milk samples were readily sensed in 12 hours. The proposed bacteria sensor exhibited great advantages of low cost, portability and simple operation, while showing a respectable limit-of-detection as low as 101 cfu mL-1 and below. Significantly, we emphasize that it takes fewer steps than existing methods and provides a reduced analysis time owing to the layer functionalization.