Zinc silicate phosphor: Insights of X-ray induced and temperature enabled luminescence.

The present investigation deals with the effect of calcination temperature on the structural and thermoluminescent (TL) properties of Zn2 SiO4 materials. For this study, Zn2 SiO4 was prepared via a simple hydrothermal route and calcinated at temperatures from 700°C to 1100°C in an air atmosphere. TL data of all Zn2 SiO4 samples showed two peaks at around 240°C and 330°C due to the formation of the luminescence centre during X-ray irradiation. More interestingly, the Zn2 SiO4 sample calcinated at 900°C exhibited a shift in the TL peak (282°C and 354°C) with an optimal TL intensity attributed to its good crystallinity with a well-defined hexagonal plate-like morphology. X-ray-irradiated Zn2 SiO4 samples calcinated at 900°C exhibited a high-temperature TL glow curve peak, suggesting that the present material could be used for high-temperature dosimetry applications.

Is Job Insecurity Worse for Mental Health Than Having a Part-time Job in Canada?

OBJECTIVES: A growing number of people depend on flexible employment, characterized by outsider employment status and perceived job insecurity. This study investigated whether there was a synergistic effect of employment status (full-time vs. part-time) and perceived job insecurity on major depressive disorder. METHODS: Data were derived from the 2012 Canadian Community Health Survey-Mental Health of 12 640 of Canada's labor force population, aged 20 to 74. By combining employment status with perceived job insecurity, we formed four employment categories: full-time secure, full-time insecure, part-time secure, and part-time insecure. RESULTS: Results showed no synergistic health effect between employment status and perceived job insecurity. Regardless of employment status (full-time vs. part-time), insecure employment was significantly associated with a high risk of major depressive disorder. Analysis of the interaction between gender and four flexible employment status showed a gender-contingent effect on this link in only full-time insecure category. Men workers with full-time insecure jobs were more likely to experience major depressive disorders than their women counterparts. CONCLUSIONS: This study's findings imply that perceived job insecurity may be a critical factor for developing major depressive disorder, in both men and women workers.

Fast on-fiber derivatization and GC/MS analysis of phytohormones in wheat based on pencil-type coated carbon fibers.

New coated carbon fibers (CCFs) have been synthesized, characterized and used as solid phase microextraction (SPME) matrix for the analysis of phytohormones (jasmonic acid, indole-3-acetic acid, and abscisic acid) in wheat samples. The SPME device, realized inserting CCFs in a pencil-type device, when coupled with gas chromatography-mass spectrometry, provides in few steps high recovery values (79-112%), fast on-fiber derivatization (30 s), good method reproducibility (RSD < 20%), low detection limits (0.5-2.1 ng g-1). The pencil-type CCFs-SPME device was successfully employed for the determination of phytohormone in wheat samples, allowing simple and quick extraction/derivatization/injection processes. The proposed device can be then considered as a promising and functional tool for fast and reliable extraction and preconcentration of analytes from real samples, allowing a simple derivatization procedure and direct injection in the chromatographic instrumentation.

A methimazole resistant patient with Graves' disease (GD): A case report of mid-term management with herbal decoctions mainly composed of Anemarrhena Bunge.

Graves' disease (GD) is the most common cause of hyperthyroidism. Anti-thyroid drugs, including methimazole, are the most commonly selected treatment option for this condition. But for decades, no additional drug option has been added. Anemarrhena Bunge has been used in many herbal decoctions for patients who had hyperthyroidism-like symptoms, such as sweating, heat intolerance, and anxiety. In this case study, a patient with GD who had once achieved therapeutic goals with methimazole but then re-developed hyperthyroidism was treated with only herbal decoctions, and achieved euthyroidism, normalization of T3, T4 levels for 13 months and maintenance of thyroid stimulating hormone (TSH) levels for 8 months and TSH binding inhibitory immunoglobulins (TBII)-negative status for 13 months (TSH and TBII level before treatment: 0.01 µIU/mL, 10.94 IU/L; TSH level normalization after 14 months from the initiation of the treatment: 0.75 µIU/mL, TBII level normalization after 9 months from the initiation of the treatment: 0.8 IU/L). The patient did not report any adverse effects related to this treatment. A herbal decoction with Anemarrhena Bunge might be effective in patients who are resistant to methimazole treatments, a finding which needs further investigation in future.

Successful Midterm Management With an Herbal Decoction, Modified-Goshajinkigan (mGJG) for Non-Proliferative Diabetic Retinopathy: A Case Study.

Diabetic retinopathy (DR) is one of the leading cause of blindness worldwide and the most common cause of blindness among the working population. Early treatment of the disease is essential to prevent severe visual loss among patients. But there are few therapeutic options available for early stage diabetic retinopathy. We present the case of an early stage diabetic retinopathy patient presented with retinal hemorrhages in the superior temporal area and disc hemorrhages of disc nasal area. The patient was diagnosed with mild NPDR on fundus examinations. After 6 months of taking modified-Goshaiinkigan (mGJG), the characteristic features of mild NPDR disappeared. Throughout three consecutive years of follow-ups, no evident lesions that could be diagnosed as DR were found during fundus examinations. Many components of mGJG have potential efficacy toward diabetic retinopathy. This study suggests that mGJG is a possible medication for early stage DR. Concerning the degenerative characteristics of DR, early management strategies are important in young DM patients and integrative care, such as in this case, are worth investigating further.

An etched stainless steel wire/ionic liquid-solid phase microextraction technique for the determination of alkylphenols in river water.

In this study, a stainless steel wire/ionic liquid-solid phase microextraction technique was developed for the direct extraction of APs from water samples. Some parameters were optimised, such as selection of the substrate and ILs, extraction time, extraction temperature, stirring rate and sample pH, etc. The experimental data demonstrated that the etched stainless steel wire was a suitable substrate for IL-coated SPME. The coating was prepared by directly depositing the ILs onto the surface of the etched stainless steel wire, which exhibited a porous structure and a high surface area. The [C8MIM][PF6] IL exhibited maximum efficiency with an extraction time of 30 min, and the aqueous sample was maintained at 40 °C and adjusted to pH 2 under stirring conditions. The enrichment factor of the IL coating for the four APs ranged from 1382 to 4779, the detection limits (LOD, S/N=3) of the four APs ranged from 0.01 to 0.04 ng mL(-1) and the RSD values for purified water spiked with APs ranged from 4.0 to 11.8% (n=3). The calibration graphs were linear in the concentration range from 0.5 to 200 ng mL(-1) (R(2)>0.9569). The optimised method was successfully applied for the analysis of real water samples, and the method was suitable for the extraction of APs from water samples.

Effect of Yeonryeonggobon-dan (YRGBD), an herbal complex, on glycemic control in patients with Type 2 diabetes mellitus: a case series.

INTRODUCTION: Diabetes mellitus has significant effects on the human body. Recently, herbal medicines have received attention as complementary anti-diabetic agents on the basis of the results of several experimental studies. We present a series of 38 cases that demonstrate the positive effect of Yeonryeonggobon-dan (YRGBD), an herbal complex, in lowering blood sugar levels in patients with uncontrolled type 2 diabetes mellitus. METHODS: We reviewed the medical records of 38 patients treated with YRGBD. The types and doses of other hypoglycemic agents administered to the patients remained unchanged during treatment with YRGBD. RESULTS: After YRGBD therapy, the glycated haemoglobin level decreased from 76.16±19.90mmol/mol (9.11±1.82%) to 51.21±8.82mmol/mol (6.84±0.81%). There was a statistically significant difference between the glycated haemoglobin levels measured before and after treatment (paired t test, p<0.001). DISCUSSION: In the present study, we show the clinical effects of YRGBD on blood sugar control in patients with type 2 diabetes mellitus. Further clinical studies investigating the effects of YRGBD are needed.

Effect of Astragalus membranaceus extract on diabetic nephropathy.

UNLABELLED: Diabetic nephropathy, a microvascular complication of diabetes, is a progressive kidney disease caused by angiopathy of the capillaries in the kidney glomeruli. Herein, we report a case of a 62-year-old patient with a 30 year history of diabetes, who showed a substantial improvement in diabetic nephropathy on administration of 30 g of Astragalus membranaceus extract per day. After 1 month, estimated glomerular filtration rate increased from 47 to 72 ml/min per 1.73 m(2) and was subsequently maintained at the 1-month follow-up. Urinary protein levels also decreased following treatment. Herein, we present and discuss the evidence and mechanism of A. membranaceus on diabetic nephropathy in this patient. LEARNING POINTS: Diabetic nephropathy is a progressive kidney disease.Angiotensin-converting enzyme (ACE) inhibitors or angiotensin receptor blockers (ARBs) are currently used to prevent and delay the progression of diabetic nephropathy. However, their effects are not sufficient to prevent a decline in kidney function.Furthermore, combination therapy with an ACE inhibitor and an ARB can produce adverse effects without additional benefits.In the early phase of diabetic nephropathy, administration of Astragalus membranaceus can be a therapeutic option.

Cation-selective electropreconcentration.

A cation-selective microfluidic sample preconcentration system is described. The cation sample was electropreconcentrated using a reversed-direction electroosmotic flow (EOF) and an anion-permselective filter, where an electric double layer (EDL) overlap condition existed. The anion-permselective filter between microchannels was fabricated by three different methods: 1) extending a positively charged, nanoporous, polymer membrane by photopolymerization of poly(diallyldimethylammonium chloride) (PDADMAC); 2) etching a nanochannel and then coating it with a positively-charged monomer, N-[3-(trimethoxysilyl)propyl]-N'-(4-vinylbenzyl)ethylenediamine hydrochloride (TMSVE); and, 3) etching a nanochannel and then coating it with a positively-charged, pre-formed polymer, polyE-323. The EOF direction in the microchannel was reversed by both TMSVE and polyE-323 coatings. The cation-selective preconcentration was investigated using charged fluorescent dyes and tetramethylrhodamine isothiocyanate (TRITC)-tagged peptides/proteins. The preconcentration in the three different systems was compared with respect to efficiency, dependence on buffer concentration and pH, tolerable flow rate, and sample adsorption. Both TMSVE- and polyE-323-coated nanochannels showed robust preconcentration at high flow rates, whereas the PDADMAC membrane maintained anion-permselectivity at higher buffer concentrations. The TMSVE-coated nanochannels showed a more stable preconcentration process, whereas the polyE-323-coated nanochannels showed a lower peptide sample adsorption and robust efficiency under a wide range of buffer pHs. The system described here can potentially be used for the preconcentration of cationic peptides/proteins on microfluidic devices for subsequent analyses.

Frictional characteristics of nano-scale mesoporous SiO2 thin film formed by sol-gel and self-assembly method.

The pores on the surface function as an outlet for wear particles and enhance the storage of lubricants, which improves lubrication effectiveness. Mesoporous SiO2 thin films were formed by the sol-gel and self-assembly methods to have a porous structure. One of the important issues in the manufacturing of the films involves the control of the porous structure to ensure proper mechanical properties. Mesoporous materials were manufactured with two surfactants, Pluronid Polyol (F127) and Cetyltrimethylammonium Bromide (CTABr). The pores were then exposed on the surface by chemical mechanical polishing (CMP) and plasma-etching. Ball-on-disk tests with mesoporous SiO2 thin films on glass specimens were conducted. The results show that the friction coefficient and wear volume of a specimen with F127, which has a 8 nm pore size, are far lower than those of CTABr, which has a 3 nm pore size at both the dry condition and at boundary lubricated condition. This proves a significant dependency of friction and wear on pore size of mesoporous SiO2 thin films.

Photovoltaic performance of nanoporous TiO2 replicas synthesized from mesoporous materials for dye-sensitized solar cells.

For dye-sensitized solar cell (DSSC), highly ordered nanoporous TiO2 materials with crystalline frameworks were successfully synthesized from different silica templates including SBA-15, KIT-6 and MSU-H. A photoelectrode in DSSC was fabricated by adsorbing cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)-ruthenium(II)bis-tetrabutylammonium dye (N719) onto the prepared TiO2 nanoparticles. The samples were characterized by XRD, TEM, FE-SEM, AFM and Brunauer-Emmett-Teller (BET), and FT-IR analysis. An investigation of the influence of the bonding structure of N719 dye and nanoporous TiO2 on the photovoltaic performance of DSSC revealed that the bonding structure of N719 on TiO2 films is caused by the unidentate and bidentate linkage. Based on the overall conversion efficiency (eta), fill factor (FF), open-circuit voltage (V(oc)) and short-circuit current (/sc) from the I-V curves measured, it was observed that the photoelectric performance is strongly dependent on the dispersion properties of the nanoporous TiO2 replicas from mesoporous silica templates.

Rat liver 10-formyltetrahydrofolate dehydrogenase, carbamoyl phosphate synthetase 1 and betaine homocysteine S-methytransferase were co-purified on Kunitz-type soybean trypsin inhibitor-coupled sepharose CL-4B.

An Asp/His catalytic site of 10-formyltetrahydrofolate dehydrogenase (FDH) was suggested to have a similar catalytic topology with the Asp/His catalytic site of serine proteases. Many studies supported the hypothesis that serine protease inhibitors can bind and modulate the activity of serine proteases by binding to the catalytic site of serine proteases. To explore the possibility that soybean trypsin inhibitor (SBTI) can recognize catalytic sites of FDH and can make a stable complex, we carried out an SBTI-affinity column by using rat liver homogenate. Surprisingly, the Rat FDH molecule with two typical liver proteins, carbamoyl-phosphate synthetase 1 (CPS1) and betaine homocysteine S-methyltransferase (BHMT) were co-purified to homogeneity on SBTI-coupled Sepharose and Sephacryl S-200 followed by Superdex 200 FPLC columns. These three liver-specific proteins make a protein complex with 300 kDa molecular mass on the gel-filtration column chromatography in vitro. Immuno-precipitation experiments by using anti-FDH and anti-SBTI antibodies also supported the fact that FDH binds to SBTI in vitro and in vivo. These results demonstrate that the catalytic site of rat FDH has a similar structure with those of serine proteases. Also, the SBTI-affinity column will be useful for the purification of rat liver proteins such as FDH, CPS1 and BHMT.