Fully inkjet-printed two-dimensional material field-effect heterojunctions for wearable and textile electronics.

Fully printed wearable electronics based on two-dimensional (2D) material heterojunction structures also known as heterostructures, such as field-effect transistors, require robust and reproducible printed multi-layer stacks consisting of active channel, dielectric and conductive contact layers. Solution processing of graphite and other layered materials provides low-cost inks enabling printed electronic devices, for example by inkjet printing. However, the limited quality of the 2D-material inks, the complexity of the layered arrangement, and the lack of a dielectric 2D-material ink able to operate at room temperature, under strain and after several washing cycles has impeded the fabrication of electronic devices on textile with fully printed 2D heterostructures. Here we demonstrate fully inkjet-printed 2D-material active heterostructures with graphene and hexagonal-boron nitride (h-BN) inks, and use them to fabricate all inkjet-printed flexible and washable field-effect transistors on textile, reaching a field-effect mobility of ~91 cm2 V-1 s-1, at low voltage (<5 V). This enables fully inkjet-printed electronic circuits, such as reprogrammable volatile memory cells, complementary inverters and OR logic gates.

Structural analysis and enhanced production of fusaricidin from Paenibacillus kribbensis CU01 isolated from yellow loess.

A bacterial strain showing strong antifungal activity was isolated from yellow loess and was identified as Paenibacillus kribbensis CU01. Insoluble mucoidal polymers were separated from M9 culture medium via low-speed centrifugation. Most antifungal activity was associated with substances in the insoluble precipitate, which was purified by reverse phase high performance liquid chromatography. Purified fractions were analyzed using matrix-assisted laser desorption/ionization time-of-flight/time-of-flight mass spectrometry. Two major ion peaks with mass-to-charge ratio values (m/z) at 883.6 and 897.6 were revealed. After alkaline hydrolysis and sequence analysis, two cyclic depsipeptides were identified as, fusaricidin A and fusaricidin B. Their production was significantly increased by the addition of glucose, Fe2+ , and Mn2+ to M9 medium. Maximum concentrations of produced fusaricidin A and fusaricidin B at flask-scale comprised 460 mg L-1 and 118 mg L-1 , respectively: the highest production concentrations yet reported in the literature. This demonstrates that P. kribbensis CU01 has enormous commercial potential for the mass production of fusaricidin.

Modeling an Excitable Biosynthetic Tissue with Inherent Variability for Paired Computational-Experimental Studies.

To understand how excitable tissues give rise to arrhythmias, it is crucially necessary to understand the electrical dynamics of cells in the context of their environment. Multicellular monolayer cultures have proven useful for investigating arrhythmias and other conduction anomalies, and because of their relatively simple structure, these constructs lend themselves to paired computational studies that often help elucidate mechanisms of the observed behavior. However, tissue cultures of cardiomyocyte monolayers currently require the use of neonatal cells with ionic properties that change rapidly during development and have thus been poorly characterized and modeled to date. Recently, Kirkton and Bursac demonstrated the ability to create biosynthetic excitable tissues from genetically engineered and immortalized HEK293 cells with well-characterized electrical properties and the ability to propagate action potentials. In this study, we developed and validated a computational model of these excitable HEK293 cells (called "Ex293" cells) using existing electrophysiological data and a genetic search algorithm. In order to reproduce not only the mean but also the variability of experimental observations, we examined what sources of variation were required in the computational model. Random cell-to-cell and inter-monolayer variation in both ionic conductances and tissue conductivity was necessary to explain the experimentally observed variability in action potential shape and macroscopic conduction, and the spatial organization of cell-to-cell conductance variation was found to not impact macroscopic behavior; the resulting model accurately reproduces both normal and drug-modified conduction behavior. The development of a computational Ex293 cell and tissue model provides a novel framework to perform paired computational-experimental studies to study normal and abnormal conduction in multidimensional excitable tissue, and the methodology of modeling variation can be applied to models of any excitable cell.

Incidental microscopic bile duct tumor thrombi in hepatocellular carcinoma after curative hepatectomy: a matched study.

In patients with hepatocellular carcinoma (HCC), the presence of bile duct tumor thrombi (BDTT) in the major bile ducts indicates poor prognosis compared with that of HCC patients without BDTT. However, the prognostic significance of incidental microscopic BDTT in the peripheral bile ducts after curative liver resection is not known. We compared the outcomes of HCC patients with and without microscopic BDTT in the peripheral bile ducts who underwent hepatectomy.The electronic medical records of 31 patients with microscopic BDTT (BDTT group) were retrospectively reviewed. To compare the surgical outcomes, 62 patients (No BDTT group) were randomly chosen from the remaining HCC patients without BDTT based on age, sex, etiology of HCC, tumor size, tumor number, and modified Union for International Cancer Control T staging.The 1-year, 2-year, and 3-year disease-free survival rates and overall survival rates were 54.8%, 34.0%, 34.0% and 90.1%, 69.2%, 61.0% in the BDTT group and 66.8%, 59.2%, 42.3% and 86.4%, 84.4%, 84.4% in the No BDTT group (P = 0.089 and P = 0.014, respectively). The overall survival curve in the No BDTT group was higher than that in the BDTT group. Multivariate analysis revealed that predisposing factors for tumor recurrence after curative liver resection included increased levels of the protein induced by vitamin K antagonist-II (PIVKA-II), tumor grades 3 and 4, and the presence of BDTT.This study demonstrates that HCC prognosis is worse in patients with incidental microscopic BDTT in the peripheral bile ducts than it is in those without BDTT. The presence of BDTT should therefore be considered when evaluating a patient's HCC prognosis after curative hepatectomy.

Biodegradable electroactive polymers for electrochemically-triggered drug delivery.

We report biodegradable electroactive polymer (EAP)-based materials and their application as drug delivery devices. Copolymers composed of oligoaniline-based electroactive blocks linked to either polyethylene glycol or polycaprolactone blocks via ester bonds were synthesized in three steps from commercially available starting materials and isolated without the need for column chromatography. The physicochemical and electrochemical properties of the polymers were characterized with a variety of techniques. The ability of the polymers to deliver the anti-inflammatory drug dexamethasone phosphate on the application of electrochemical stimuli was studied spectroscopically. Films of the polymers were shown to be degradable and cell adhesive in vitro. Such EAP-based materials have prospects for integration in implantable fully biodegradable/bioerodible EAP-based drug delivery devices that are capable of controlling the chronopharmacology of drugs for future clinical application.

Activation-free printed carbon nanotube field emitters.

When a carbon nanotube paste is formulated based on highly functional hyperbranched polymers such as dipentaerythritol hexaacrylate, the volume shrinkage during thermal curing builds up internal stress that generates microcrack patterns on the printed surface. The nanotubes exposed in the cracks emit electrons successfully at such an extremely low electric field as 0.5 V µm( - 1), and reach 25.5 mA cm( - 2) of current density at 2 Vµm( - 1) from an optimized paste concerning mainly the size and spatial uniformity of the crack. In addition to the superior field emission properties with low manufacturing cost, this activation-free technology can provide a minimized nanohazard in the device fabrication process, compared to those conventional activation technologies developing serious nanoflakes by using destructive methods.

A computer model of engineered cardiac monolayers.

Engineered monolayers created using microabrasion and micropatterning methods have provided a simplified in vitro system to study the effects of anisotropy and fiber direction on electrical propagation. Interpreting the behavior in these culture systems has often been performed using classical computer models with continuous properties. However, such models do not account for the effects of random cell shapes, cell orientations, and cleft spaces inherent in these monolayers on the resulting wavefront conduction. This work presents a novel methodology for modeling a monolayer of cardiac tissue in which the factors governing cell shape, cell-to-cell coupling, and degree of cleft space are not constant but rather are treated as spatially random with assigned distributions. This modeling approach makes it possible to simulate wavefront propagation in a manner analogous to performing experiments on engineered monolayer tissues. Simulated results are compared to previously published measured data from monolayers used to investigate the role of cellular architecture on conduction velocities and anisotropy ratios. We also present an estimate for obtaining the electrical properties from these networks and demonstrate how variations in the discrete cellular architecture affect the macroscopic conductivities. The simulations support the common assumption that under normal ranges of coupling strength, tissues with relatively uniform distributions of cell shapes and connectivity can be represented using continuous models with conductivities derived from random discrete cellular architecture using either global or local estimates. The results also reveal that in the presence of abrupt changes in cell orientation, local estimates of tissue properties predict smoother changes in conductivity that may not adequately predict the discrete nature of propagation at the transition sites.

Thresholds for transverse stimulation: fiber bundles in a uniform field.

Cable theory is used to model fibers (neural or muscular) subjected to an extracellular stimulus or activating function along the fiber (longitudinal stimulation). There are cases however, in which activation from fields across a fiber (transverse stimulation) is dominant and the activating function is insufficient to predict the relative stimulus thresholds for cells in a bundle. This work proposes a general method of quantifying transverse extracellular stimulation using ideal cases of long fibers oriented perpendicular to a uniform field (circular cells in a 2-D extracellular domain). Several methods are compared against a fully coupled model to compute electrical potentials around each cell of a bundle and predict the magnitude of applied plate potential (Phi(p)) needed to activate a given cell (Phi(pact)). The results show that with transverse stimulation, the effect of cell presence on the external field must be considered to accurately compute Phi(pact). They also show that approximating cells as holes can accurately predict firing order and Phi(pact) of cells in bundles. Potential profiles from this hole model can also be applied to single cell models to account for time-dependent transmembrane voltage responses and more accurately predict Phi(pact). The approaches used herein apply to other examples of transverse cell stimulation where cable theory is inapplicable and coupled model simulation is too costly to compute.

Building a backlight unit with lateral gate structure based on carbon nanotube field emitters.

This paper describes the fabrication of a backlight unit for liquid crystal display based on printed carbon nanotube field emitters with lateral gate and additional mesh structures. The device architecture has been optimized through field emission characterization and supporting numerical simulation. The emission current depends strongly on the cathode-gate gap, mesh position, and mesh bias. Direct observation of luminous images on a phosphor screen reveals that the electron beams undergo a noticeable shrinkage along the lateral direction with increasing anode bias, which is in good agreement with the simulation results. We suggest and demonstrate a modified structure equipped with double emitter edges leading to approximately 20% improved phosphor efficiency (34.4 lm W(-1)) and luminance (9600 cd m(-2)), compared to those from a single edge structure.

Magnoliae flos induces apoptosis of RBL-2H3 cells via mitochondria and caspase.

BACKGROUND: Magnoliae flores (MF), the buds of Magnolia denudata Desrousseaux, have been successfully used for the management of allergic diseases in Korea. The purpose of the present study was to determine their causal role in inducing apoptosis of mast cells and to verify the underlying mechanism. METHODS: The viability of mast cells was assessed by the trypan blue exclusion test. Induction of apoptosis was confirmed by DNA fragmentation, nuclear staining and DNA hypoploidy. Western blotting and immunofluorescent staining were performed to study the alterations in expression level and translocation of apoptosis-related proteins. Mitochondrial membrane potential (MMP) change and cytochrome C release were assayed. RESULTS: We present several lines of evidence indicating that MF induce apoptosis. Changes in cell morphology, generation of DNA fragmentation, cell cycle arrest, activation of caspase-3, and PARP and DFF degradations were demonstrated. The reduction of MMP and the release of cytochrome C to cytosol were also shown. Either PTP blockers, bongkrekic acid and cyclosporin A, or pancaspase inhibitors, Boc.D-fmk and zVAD-fmk, did not prevent the release of cytochrome C. Bax protein content was increased, and Bax was translocated from cytosol into mitochondria at early time points after MF treatment. CONCLUSIONS: We have demonstrated that MF induce mitochondria- and caspase-dependent mast cell apoptosis. Our observations contribute new insights to the role of MF and support the view that the clinical effect of MF may depend on their pharmacological efficacy in regulating mast cell apoptosis.

Early mitochondrial hyperpolarization and intracellular alkalinization in lactacystin-induced apoptosis of retinal pigment epithelial cells.

We investigated the induction and underlying mechanism of apoptosis in retinal pigment epithelial cells by the inhibition of proteasome activity using lactacystin. Rat retinal pigment epithelial cell line retinal pigment epithelial (RPE)-J was used in this study. Apoptosis was evaluated by light and electron microscopies, DNA electrophoresis, and terminal deoxynucleotidyl transferase dUTP nick-end labeling assay. The apoptosis-related proteins were localized in the cells by immunofluorescent microscopy, and the changes of their protein contents and the enzyme activation were monitored by Western blot. Mitochondrial membrane potential was quantified by measuring J aggregate (5,5',6,6'-tetrachloro-1,1',3,3'-tetraethylbenzimidazol carbocyanine iodide) fluorescence. To measure changes in intracellular pH, cells were loaded with 2',7'-bis(carboxyethyl)-5(6')-carboxyfluorescein and assayed by flow cytometry. To elucidate the type of transport system involving intracellular pH regulation, several transporter inhibitors were used, and their effect on pH and membrane potential was assayed as described above. Lactacystin treatment significantly induced apoptosis in RPE-J cells. During the RPE cell apoptosis, 1) cytochrome c and Smac/DIABLO were released into cytosol from mitochondria, 2) translocation of apoptosis-inducing factor to the nucleus was evident, 3) Bax protein seemed to translocate to mitochondria, 4) procaspase-3 and poly(ADP-ribose) polymerase were cleaved, and 5) nuclear condensation and DNA fragmentation were clearly observed. Noticeably, a transient increase of mitochondrial membrane potential was coincidentally detected with the intracellular alkalinization after lactacystin administration. Furthermore, the lactacystin-induced early alkalinization was inhibited by 4-acetamido-4'-isothiocyanostilbene-2,2'-disulfonate, an inhibitor of Cl(-)/HCO(3)(-) anion exchanger, which also prevented early mitochondrial hyperpolarization and apoptosis. Lactacystin-induced apoptosis in RPE-J cells is closely associated with an early mitochondrial hyperpolarization induced by intracellular alkalinization.