Liquid collagen from freshwater fish skin ameliorates hydration, roughness and elasticity in photo-aged skin: a randomized, controlled, clinical study.

BACKGROUND/OBJECTIVES: Collagen is commonly used in diverse forms as a functional component in skincare products. On the other hand, the effects of collagen on human skin are controversial. Dietary collagen hydrolysates from freshwater Pangasius hypophthalmus fish skin ameliorated photo-aged skin of hairless mice. This study conducted a randomized, double-blind, placebo-controlled clinical trial to determine if liquid fish collagen (Collagen-Tripep20™, Tripep20) as a drink strengthens skin health and quality. SUBJECTS/METHODS: In this clinical trial, 85 subjects aged 35-60 yrs were diagnosed with photo-aged skin. Eighty-five subjects were randomized to receive either Tripep20 (n = 44) or placebo (n = 41). Seventy-eight subjects fully participating for a 12-week period consumed 1,000 mg of Tripep20 (n = 41) or placebo (n = 37) in a 50-mL bottle as a daily drink. The intend-to-treat and per-protocol populations were 85 and 78, respectively. Skin hydration, wrinkles, and elasticity were assessed at 0 (baseline), 6, and 12 weeks during the study period. RESULTS: Skin hydration in the Tripep20 group was significantly higher from 6 weeks (P < 0.001) than the baseline. After 12 weeks, the Crow's-feet visual score and skin roughness (Ra, Rq, and Rmax) were significantly improved in the Tripep20 group than in the placebo group (P < 0.05). Consuming liquid collagen Tripep20 greatly enhanced skin elasticity (Gross R2, Net R5, and Biological elasticity R7) in 6 weeks compared to the placebo group. The Tripep20 group showed a significant increase in skin elasticity from the baseline after 6 and 12 weeks (P < 0.001). Neither abnormal symptoms nor adverse events were encountered during the study period in subjects ingesting Tripep20 or placebo. The changes in parameters related to hematology and clinical chemistry were within the normal ranges. CONCLUSION: Oral consumption of liquid collagen Tripep20 was safe and well-tolerated. The results of this study show that freshwater fish-derived liquid collagen Tripep20 can be used as a healthy functional food ingredient to improve skin moisturizing, anti-wrinkling, and elasticity in an aging population.

Fluoro-Ethylene-Carbonate Plays a Double-Edged Role on the Stability of Si Anode-Based Rechargeable Batteries During Cycling and Calendar Aging.

The energy storage density of Li-ion batteries can be improved by replacing graphite anodes with high-capacity Si-based materials, though instabilities have limited their implementation. Performance degradation mechanisms that occur in Si anodes can be divided into cycling stability (capacity retention after repeated battery cycles) and calendar aging (shelf life). While cycling instabilities and improvement strategies have been researched intensively, there is little known about the underlying mechanisms that cause calendar aging. In this work, multiple electron microscope techniques are used to explore the mechanism that governs calendar aging from the sub-nanometer-to-electrode scale. Plasma focused ion beam tomography is used to create 3D reconstructions of calendar aged electrodes and revealed the growth of a LiF-rich layer at the interface between the copper current collector and the silicon material, which can lead to delamination and increased interfacial impendence. The LiF layer appeared to derive from the fluoro-ethylene-carbonate electrolyte additive, which is commonly used to improve cycling stability in Si-based systems. The results reveal that additives necessary to improve cycling stability can cause performance degradation over the long-term during calendar aging. The results show that high performing, stable systems require careful design to simultaneously mitigate both cycling and calendar aging instabilities.

Tailoring Solvation Solvent in Localized High-Concentration Electrolytes for Lithium||Sulfurized Polyacrylonitrile.

Sulfurized polyacrylonitrile (SPAN) is a promising cathode material for lithium-sulfur (Li-S) batteries due to its significantly reduced polysulfide (PS) dissolution compared to that of elemental S cathodes. Although conventional carbonate-based electrolytes are stable with SPAN electrodes, they are unstable with Li metal anodes. Recently, localized high-concentration electrolytes (LHCEs) have been developed to improve the stability of Li anodes. Here, we report a new strategy to further improve the performance of Li||SPAN batteries by replacing the conventional solvating solvent 1,2-dimethoxyethane (DME) in LHCEs with a new solvating solvent, 1,2-diethoxyethane (DEE). The new optimal DEE-LHCE exhibits less reactivity against Li2S2, alleviates PS dissolution, forms a better cathode-electrolyte interphase layer on the SPAN cathode, and enhances SPAN structural reversibility even at elevated temperatures (45 °C). Compared to DME-LHCE, DEE-LHCE with the same salt and diluent leads to better performance in Li||SPAN batteries (with 82.9% capacity retention after 300 cycles at 45 °C), preservation of the SPAN cathode structure, and suppression of volume change of the Li metal anode. A similar strategy on tailoring the solvating solvents in LHCEs can also be used in other rechargeable batteries to improve their electrochemical performances.

N-Acetylglucosamine and its dimer ameliorate inflammation in murine colitis by strengthening the gut barrier function.

Ulcerative colitis (UC) is a chronic gastrointestinal disease whose incidence is increasing rapidly worldwide. Anti-inflammatory medications, including 5-aminosalicylic acid (5-ASA), corticosteroids, and immunosuppressants, are used for its treatment; however, new alternatives would be required due to the serious side effects of some of these medications. N-Acetylglucosamine (NAG) is an amino sugar composed of mucin that is secreted by intestinal epithelial cells. It is also used to promote the growth of intestinal bacteria. The current study aimed to determine the efficacy of NAG against dextran sulfate sodium (DSS)-induced chronic colitis and elucidate its mechanism of action. Mice were randomly divided into control, DSS, 0.1% sulfasalazine, 0.1% NAG, 0.3% NAG, and 0.3% NAG-dimer (NAG-D) groups, and results showed that colitis-induced body weight loss, disease activity, colonic tissue damage, colon length shortening, and the loss of mucin-secreting area were significantly improved in the NAG-D group. The intestinal permeability indicator, serum CD 14 level, and expression of the tight junction protein, occludin, were both improved in the 0.3% NAG group. Inflammatory biomarkers, including GATA3, IFN-γ, p-IκBα, COX2, TGF-ß1, and Smad7, were significantly lower in the 0.3% NAG and NAG-D groups than in the DSS group. The intestinal microbial composition was most significantly altered in the 0.3% NAG group, showing decreased ratios of pathogenic bacteria, such as Betaproteobacteria, especially Burkholderiales. The results overall suggested that NAG or NAG-D supplementation can alleviate inflammation by strengthening the intestinal barrier function and maintaining gut microbiota homeostasis in a DSS-induced colitis mouse model.

A Systematic Study on the Effects of Solvating Solvents and Additives in Localized High-Concentration Electrolytes over Electrochemical Performance of Lithium-Ion Batteries.

Localized high-concentration electrolytes (LHCEs) based on five different types of solvents were systematically studied and compared in lithium (Li)-ion batteries (LIBs). The unique solvation structure of LHCEs promotes the participation of Li salt in forming solid electrolyte interphase (SEI) on graphite (Gr) anode, which enables solvents previously considered incompatible with Gr to achieve reversible lithiation/delithiation. However, the long cyclability of LIBs is still subject to the intrinsic properties of the solvent species in LHCEs. Such issue can be readily resolved by introducing a small amount of additive into LHCEs. The synergetic decompositions of Li salt, solvating solvent and additive yield effective SEIs and cathode electrolyte interphases (CEIs) in most of the studied LHCEs. This study reveals that both the structure and the composition of solvation sheaths in LHCEs have significant effect on SEI and CEI, and consequently, the cycle life of energetically dense LIBs.

Unravelling the convoluted and dynamic interphasial mechanisms on Li metal anodes.

Accurate understanding of the chemistry of solid-electrolyte interphase (SEI) is key to developing new electrolytes for high-energy batteries using lithium metal (Li0) anodes1. SEI is generally believed to be formed by the reactions between Li0 and electrolyte2,3. However, our new study shows this is not the whole story. Through synchrotron-based X-ray diffraction and pair distribution function analysis, we reveal a much more convoluted formation mechanism of SEI, which receives considerable contributions from electrolyte, cathode, moisture and native surface species on Li0, with highly dynamic nature during cycling. Using isotope labelling, we traced the origin of LiH to electrolyte solvent, moisture and a new source: the native surface species (LiOH) on pristine Li0. When lithium accessibility is very limited as in the case of anode-free cells, LiOH develops into plate-shaped large crystals during cycling. Alternatively, when the lithium source is abundant, as in the case of Li||NMC811 cells, LiOH reacts with Li0 to form LiH and Li2O. While the desired anion-derived LiF-rich SEI is typically found in the concentrated electrolytes or their derivatives, we found it can also be formed in low-concentration electrolyte via the crosstalk effect, emphasizing the importance of formation cycle protocol and opening up opportunities for low-cost electrolyte development.

Redox-homogeneous, gel electrolyte-embedded high-mass-loading cathodes for high-energy lithium metal batteries.

Lithium metal batteries have higher theoretical energy than their Li-ion counterparts, where graphite is used at the anode. However, one of the main stumbling blocks in developing practical Li metal batteries is the lack of cathodes with high-mass-loading capable of delivering highly reversible redox reactions. To overcome this issue, here we report an electrode structure that incorporates a UV-cured non-aqueous gel electrolyte and a cathode where the LiNi0.8Co0.1Mn0.1O2 active material is contained in an electron-conductive matrix produced via simultaneous electrospinning and electrospraying. This peculiar structure prevents the solvent-drying-triggered non-uniform distribution of electrode components and shortens the time for cell aging while improving the overall redox homogeneity. Moreover, the electron-conductive matrix eliminates the use of the metal current collector. When a cathode with a mass loading of 60 mg cm-2 is coupled with a 100 µm thick Li metal electrode using additional non-aqueous fluorinated electrolyte solution in lab-scale pouch cell configuration, a specific energy and energy density of 321 Wh kg-1 and 772 Wh L-1 (based on the total mass of the cell), respectively, can be delivered in the initial cycle at 0.1 C (i.e., 1.2 mA cm-2) and 25 °C.

Facile Dual-Protection Layer and Advanced Electrolyte Enhancing Performances of Cobalt-free/Nickel-rich Cathodes in Lithium-Ion Batteries.

Despite cobalt (Co)-free/nickel (Ni)-rich layered oxides being considered as one of the promising cathode materials due to their high specific capacity, their highly reactive surface still hinders practical application. Herein, a polyimide/polyvinylpyrrolidone (PI/PVP, denoted as PP) coating layer is demonstrated as dual protection for the LiNi0.96Mg0.02Ti0.02O2 (NMT) cathode material to suppress surface contamination against moist air and to prevent unwanted interfacial side reactions during cycling. The PP-coated NMT (PP@NMT) preserves a relatively clean surface with the bare generation of lithium residues, structural degradation, and gas evolution even after exposure to air with ∼30% humidity for 2 weeks compared to the bare NMT. In addition, the exposed PP@NMT significantly enhances the electrochemical performance of graphite||NMT cells by preventing byproducts and structural distortion. Moreover, the exposed PP@NMT achieves a high capacity retention of 86.7% after 500 cycles using an advanced localized high-concentration electrolyte. This work demonstrates promising protection of Co-free/Ni-rich layered cathodes for their practical usage even after exposure to moist air.

Toward the Practical Use of Cobalt-Free Lithium-Ion Batteries by an Advanced Ether-Based Electrolyte.

The criticality of cobalt (Co) has been motivating the quest for Co-free positive electrode materials for building lithium (Li)-ion batteries (LIBs). However, the LIBs based on Co-free positive electrode materials usually suffer from relatively fast capacity decay when coupled with conventional LiPF6-organocarbonate electrolytes. To address this issue, a 1,2-dimethoxyethane-based localized high-concentration electrolyte (LHCE) was developed and evaluated in a Co-free Li-ion cell chemistry (graphite||LiNi0.96Mg0.02Ti0.02O2). Extraordinary capacity retentions were achieved with the LHCE in coin cells (95.3%), single-layer pouch cells (79.4%), and high-capacity loading double-layer pouch cells (70.9%) after being operated within the voltage range of 2.5-4.4 V for 500 charge/discharge cycles. The capacity retentions of counterpart cells using the LiPF6-based conventional electrolyte only reached 61.1, 57.2, and 59.8%, respectively. Mechanistic studies reveal that the superior electrode/electrolyte interphases formed by the LHCE and the intrinsic chemical stability of the LHCE account for the excellent electrochemical performance in the Co-free Li-ion cells.

Optimization of Magnesium-Doped Lithium Metal Anode for High Performance Lithium Metal Batteries through Modeling and Experiment.

Lithium (Li)-magnesium (Mg) alloy with limited Mg amount, which can also be called Mg-doped Li (Li-Mg), has been considered as a potential alternative anode for high energy density rechargeable Li metal batteries. However, the optimum doping-content of Mg in Li-Mg anode and the mechanism of the improved performance are not well understood. Herein, density functional theory (DFT) calculations are used to investigate the effect of Mg amount in Li-Mg anode. The Li-Mg with about 5 wt. % Mg (abbreviated as Li-Mg5) has the lowest absorption energy of Li, thus all the surface area can be "controlled" by Mg atoms, leading to the smooth and continuous deposition of Li on the surface around the Mg center. A localized high concentration electrolyte enables Li-Mg5 to exhibit the best cycling stability in Li metal batteries with high-loading cathode and lean electrolyte under 4.4 V high-voltage, which is approaching the demand of practical application. This electrolyte also helps generate an inorganic-rich solid electrolyte interphase, which leads to smooth, compact and less corrosion layer on the Li-Mg5 surface. Both theoretical simulations and experimental results prove that Li-Mg5 has optimum Mg content and gives best battery cycling performance.

Nanofibrous Conductive Binders Based on DNA-Wrapped Carbon Nanotubes for Lithium Battery Electrodes.

In contrast to enormous progresses in electrode active materials, little attention has been paid to electrode sheets despite their crucial influence on practical battery performances. Here, as a facile strategy to address this issue, we demonstrate nanofibrous conductive electrode binders based on deoxyribonucleic acid (DNA)-wrapped single-walled carbon nanotubes (SWCNT) (denoted as DNA@SWCNT). DNA@SWCNT binder allows the removal of conventional polymeric binders and carbon powder additives in electrodes. As a proof of concept, high-capacity overlithiated layered oxide (OLO) is chosen as a model electrode active material. Driven by nanofibrous structure and DNA-mediated chemical functionalities, the DNA@SWCNT binder enables improvements in the redox reaction kinetics, adhesion with metallic foil current collectors, and chelation of heavy metal ions dissolved from OLO. The resulting OLO cathode exhibits a fast charging capability (relative capacity ratio after 15 min [versus 10 h] of charging = 83%), long cyclability (capacity retention = 98% after 700 cycles), and thermal stability.

Cellulose Nanofiber/Carbon Nanotube-Based Bicontinuous Ion/Electron Conduction Networks for High-Performance Aqueous Zn-Ion Batteries.

Despite their potential as a next-generation alternative to current state-of-the-art lithium (Li)-ion batteries, rechargeable aqueous zinc (Zn)-ion batteries still lag in practical use due to their low energy density, sluggish redox kinetics, and limited cyclability. In sharp contrast to previous studies that have mostly focused on materials development, herein, a new electrode architecture strategy based on a 3D bicontinuous heterofibrous network scaffold (HNS) is presented. The HNS is an intermingled nanofibrous mixture composed of single-walled carbon nanotubes (SWCNTs, for electron-conduction channels) and hydrophilic cellulose nanofibers (CNFs, for electrolyte accessibility). As proof-of-concept for the HNS electrode, manganese dioxide (MnO2 ) particles, one of the representative Zn-ion cathode active materials, are chosen. The HNS allows uniform dispersion of MnO2 particles and constructs bicontinuous electron/ion conduction pathways over the entire HNS electrode (containing no metallic foil current collectors), thereby facilitating the redox kinetics (in particular, the intercalation/deintercalation of Zn2+ ions) of MnO2 particles. Driven by these advantageous effects, the HNS electrode enables substantial improvements in the rate capability, cyclability (without structural disruption and aggregation of MnO2 ), and electrode sheet-based energy (91 Wh kgelectrode -1 )/power (1848 W kgelectrode -1 ) densities, which lie far beyond those achievable with conventional Zn-ion battery technologies.

Flexible/Rechargeable Zn-Air Batteries Based on Multifunctional Heteronanomat Architecture.

The increasing demand for advanced rechargeable batteries spurs development of new power sources beyond currently most widespread lithium-ion batteries. Here, we demonstrate a new class of flexible/rechargeable zinc (Zn)-air batteries based on multifunctional heteronanomat architecture as a scalable/versatile strategy to address this issue. In contrast to conventional electrodes that are mostly prepared by slurry-casting techniques, heteronanomat (denoted as "HM") framework-supported electrodes are fabricated through one-pot concurrent electrospraying (for electrode powders/single-walled carbon nanotubes (SWCNTs)) and electrospinning (for polyetherimide (PEI) nanofibers) process. Zn powders (in anodes) and rambutan-shaped cobalt oxide (Co3O4)/multiwalled carbon nanotube (MWCNT) composite powders (in cathodes) are used as electrode active materials for proof of concept. The Zn (or Co3O4/MWCNT) powders are densely packed and spatially bound by the all-fibrous HM frameworks that consist of PEI nanofibers (for structural stability)/SWCNTs (for electrical conduction) networks, leading to the formation of three-dimensional bicontinuous ion/electron transport channels in the electrodes. The HM electrodes are assembled with cross-linked polyvinyl alcohol/polyvinyl acrylic acid gel polymer electrolytes (acting as zincate ion crossover-suppressing, permselective separator membranes). Benefiting from its unique structure and chemical functionalities, the HM-structured Zn-air cell significantly improves mechanical flexibility and electrochemical rechargeability, which are difficult to achieve with conventional Zn-air battery technologies.

Beyond Slurry-Cast Supercapacitor Electrodes: PAN/MWNT Heteromat-Mediated Ultrahigh Capacitance Electrode Sheets.

Supercapacitors (SCs) have garnered considerable attention as an appealing power source for forthcoming smart energy era. An ultimate challenge facing the SCs is the acquisition of higher energy density without impairing their other electrochemical properties. Herein, we demonstrate a new class of polyacrylonitrile (PAN)/multi-walled carbon tube (MWNT) heteromat-mediated ultrahigh capacitance electrode sheets as an unusual electrode architecture strategy to address the aforementioned issue. Vanadium pentoxide (V2O5) is chosen as a model electrode material to explore the feasibility of the suggested concept. The heteromat V2O5 electrode sheets are produced through one-pot fabrication based on concurrent electrospraying (for V2O5 precursor/MWNT) and electrospinning (for PAN nanofiber) followed by calcination, leading to compact packing of V2O5 materials in intimate contact with MWNTs and PAN nanofibers. As a consequence, the heteromat V2O5 electrode sheets offer three-dimensionally bicontinuous electron (arising from MWNT networks)/ion (from spatially reticulated interstitial voids to be filled with liquid electrolytes) conduction pathways, thereby facilitating redox reaction kinetics of V2O5 materials. In addition, elimination of heavy metallic foil current collectors, in combination with the dense packing of V2O5 materials, significantly increases (electrode sheet-based) specific capacitances far beyond those accessible with conventional slurry-cast electrodes.

A facile route for growth of CNTs on Si@hard carbon for conductive agent incorporating anodes for lithium-ion batteries.

Conductive agent incorporating Si anodes consisting of directly grown carbon nanotubes on hard carbon encapsulating Si nanoparticles were prepared by a one-pot chemical vapour deposition process. Owing to this fabulous structure, Si-based anodes exhibit excellent cycle retention and rate capability with a high-mass-loading of 3.5 mg cm(-2).

Conducting polymer-skinned electroactive materials of lithium-ion batteries: ready for monocomponent electrodes without additional binders and conductive agents.

Rapid growth of mobile and even wearable electronics is in pursuit of high-energy-density lithium-ion batteries. One simple and facile way to achieve this goal is the elimination of nonelectroactive components of electrodes such as binders and conductive agents. Here, we present a new concept of monocomponent electrodes comprising solely electroactive materials that are wrapped with an insignificant amount (less than 0.4 wt %) of conducting polymer (PEDOT:PSS or poly(3,4-ethylenedioxythiophene) doped with poly(styrenesulfonate)). The PEDOT:PSS as an ultraskinny surface layer on electroactive materials (LiCoO2 (LCO) powders are chosen as a model system to explore feasibility of this new concept) successfully acts as a kind of binder as well as mixed (both electrically and ionically) conductive film, playing a key role in enabling the monocomponent electrode. The electric conductivity of the monocomponent LCO cathode is controlled by simply varying the PSS content and also the structural conformation (benzoid-favoring coil structure and quinoid-favoring linear or extended coil structure) of PEDOT in the PEDOT:PSS skin. Notably, a substantial increase in the mass-loading density of the LCO cathode is realized with the PEDOT:PSS skin without sacrificing electronic/ionic transport pathways. We envisage that the PEDOT:PSS-skinned electrode strategy opens a scalable and versatile route for making practically meaningful binder-/conductive agent-free (monocomponent) electrodes.

Multifunctional semi-interpenetrating polymer network-nanoencapsulated cathode materials for high-performance lithium-ion batteries.

As a promising power source to boost up advent of next-generation ubiquitous era, high-energy density lithium-ion batteries with reliable electrochemical properties are urgently requested. Development of the advanced lithium ion-batteries, however, is staggering with thorny problems of performance deterioration and safety failures. This formidable challenge is highly concerned with electrochemical/thermal instability at electrode material-liquid electrolyte interface, in addition to structural/chemical deficiency of major cell components. Herein, as a new concept of surface engineering to address the abovementioned interfacial issue, multifunctional conformal nanoencapsulating layer based on semi-interpenetrating polymer network (semi-IPN) is presented. This unusual semi-IPN nanoencapsulating layer is composed of thermally-cured polyimide (PI) and polyvinyl pyrrolidone (PVP) bearing Lewis basic site. Owing to the combined effects of morphological uniqueness and chemical functionality (scavenging hydrofluoric acid that poses as a critical threat to trigger unwanted side reactions), the PI/PVP semi-IPN nanoencapsulated-cathode materials enable significant improvement in electrochemical performance and thermal stability of lithium-ion batteries.

Pharmacokinetics of chlorogenic acid and corydaline in DA-9701, a new botanical gastroprokinetic agent, in rats.

1.Few studies describing the pharmacokinetic properties of chlorogenic acid (CA) and corydaline (CRD) which are marker compounds of a new prokinetic botanical agent, DA-9701, have been reported. The aim of the present study is to evaluate the pharmacokinetic properties CA and CRD following intravenous and oral administration of pure CA (1-8 mg/kg) or CRD (1.1-4.5 mg/kg) and their equivalent dose of DA-9701 to rats. 2. Dose-proportional AUC and dose-independent clearance (10.3-12.1 ml/min/kg) of CA were observed following its administration. Oral administration of CA as DA-9701 did not influence the oral pharmacokinetic parameters of CA. Incomplete absorption of CA, its decomposition in the gastrointestinal tract, and/or pre-systemic metabolism resulted in extremely low oral bioavailability (F) of CA (0.478-0.899%). 3. CRD showed greater dose-normalized AUC in the higher dose group than that in lower dose group(s) after its administration due to saturation of its metabolism via decreased non-renal clearance (by 51.3%) and first-pass extraction. As a result, the F of CRD following 4.5 mg/kg oral CRD (21.1%) was considerably greater than those of the lower dose groups (9.10 and 13.8%). However, oral administration of CRD as DA-9701 showed linear pharmacokinetics as a result of increased AUC and F in lower-dose groups (by 182% and 78.5%, respectively) compared to those of pure CRD. The greater oral AUC of CRD for DA-9701 than for pure CRD could be due to decreased hepatic and/or GI first-pass extraction of CRD by other components in DA-9701.

Pharmacokinetics of macrolactin A and 7-O-succinyl macrolactin A in mice.

1. As promising anti-macular degeneration and/or anti-tumour agents, a better understanding of the pharmacokinetics of macrolactin A (MA) and 7-O-succinyl macrolactin A (SMA) is essential. Thus, we evaluated the pharmacokinetics of MA and SMA after intravenous, oral, or intraperitoneal administration of each drug to mice. 2. Both hepatic and extra-hepatic extractions of MA were expected based on the rapid total body clearance (CL) of MA. MA also showed a large steady-state volume of distribution (Vss) in mice. A relatively slower CL (by 54.1%) and smaller Vss (by 85.8%) were observed for SMA than for MA. In accordance with the larger Vss values of MA than of SMA, the mouse tissues studied had good affinity to MA but less affinity to SMA. 3. Both MA and SMA had an extremely low oral extent of absolute bioavailability (F). This could have been a result of the instability of MA and SMA in the gastrointestinal tract, supported by their unstable property in acidic buffer. Gastrointestinal and/or hepatic first-pass extraction of MA and SMA may be other reasons. 4. The pharmacokinetic profiles of both MA and SMA were much improved (greater AUC and F values) following intraperitoneal administration than following oral administration due to avoidance of acidic degradation and/or gastrointestinal first-pass extraction.

Pharmacokinetics of hederacoside C, an active ingredient in AG NPP709, in rats.

1. Hederacoside C (HDC) is one of the active ingredients in Hedera helix leaf extract (Ivy Ex.) and AG NPP709, a new botanical drug to treat acute respiratory infection and chronic inflammatory bronchitis. However, information regarding its pharmacokinetic properties remains limited. 2. Here, we report the pharmacokinetics of HDC in rats after intravenous administration of HDC (3, 12.5, and 25 mg/kg) and after oral administration of HDC, Ivy Ex., and AG NPP709 (equivalent to 12.5, 25, and 50 mg/kg HDC). 3. Linear pharmacokinetics of HDC were identified upon its intravenous administration at doses of 3-25 mg/kg. Intravenous administration of HDC results in relatively slow clearance (1.46-2.08 mL/min/kg) and a small volume of distribution at steady state (138-222 mL/kg), while oral administration results in a low absolute oral bioavailability (F) of 0.118-0.250%. The extremely low F of HDC may be due to poor absorption of HDC from the gastrointestinal (GI) tract and/or its decomposition therein. 4. The oral pharmacokinetics of HDC did not differ significantly among pure HDC, Ivy Ex., and AG NPP709.