Graphene-based biosensors for detecting coronavirus: a brief review.

The coronavirus (SARS-CoV-2) disease has affected the globe with 770 437 327 confirmed cases, including about 6 956 900 deaths, according to the World Health Organization (WHO) as of September 2023. Hence, it is imperative to develop diagnostic technologies, such as a rapid cost-effective SARS-CoV-2 detection method. A typical biosensor enables biomolecule detection with an appropriate transducer by generating a measurable signal from the sample. Graphene can be employed as a component for ultrasensitive and selective biosensors based on its physical, optical, and electrochemical properties. Herein, we briefly review graphene-based electrochemical, field-effect transistor (FET), and surface plasmon biosensors for detecting the SARS-CoV-2 target. In addition, details on the surface modification, immobilization, sensitivity and limit of detection (LOD) of all three sensors with regard to SARS-CoV-2 were reported. Finally, the point-of-care (POC) detection of SARS-CoV-2 using a portable smartphone and a wearable watch is a current topic of interest.

Citric Acid Catalyst-Assisted Bioactive Glass with Hydrogen Peroxide for In Vitro Bioactivity and Biodegradability Using Sol-Gel Method.

In this study, carbon-free and completely soluble hydrogen peroxide (H2O2) was utilized in place of conventional surfactants as a pore-forming agent. Citric acid was also used in low concentration for the hydrolysis reaction. A sol-gel method was used to prepare bioactive glass (BG) specimens of H2O2-untreated BG, 1M, 2M, and 3M H2O2-treated BGs. X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), energy-dispersive spectroscopy (EDS), and nitrogen adsorption/desorption isotherm with the Brunauer-Emmett-Teller (BET) method were used for analyzing the samples' phase, surface morphology, chemical composition, constituent composition, pore size, and specific surface area respectively. In vitro bioactivity, as well as biodegradability tests, was performed on samples by immersing them in simulated body fluid (SBF) solution. According to the results, BG particles treated with 2 M H2O2 exhibited higher specific surface area (SSA), which is 189.55 cc/g, and better in vitro bioactivity and biodegradability.

Phase Behavior and Role of Organic Additives for Self-Doped CsPbI3 Perovskite Semiconductor Thin Films.

The phase change of all-inorganic cesium lead halide (CsPbI3) thin film from yellow δ-phase to black γ-/α-phase has been a topic of interest in the perovskite optoelectronics field. Here, the main focus is how to secure a black perovskite phase by avoiding a yellow one. In this work, we fabricated a self-doped CsPbI3 thin film by incorporating an excess cesium iodide (CsI) into the perovskite precursor solution. Then, we studied the effect of organic additive such as 1,8-diiodooctane (DIO), 1-chloronaphthalene (CN), and 1,8-octanedithiol (ODT) on the optical, structural, and morphological properties. Specifically, for elucidating the binary additive-solvent solution thermodynamics, we employed the Flory-Huggins theory based on the oligomer level of additives' molar mass. Resultantly, we found that the miscibility of additive-solvent displaying an upper critical solution temperature (UCST) behavior is in the sequence CN:DMF > ODT:DMF > DIO:DMF, the trends of which could be similarly applied to DMSO. Finally, the self-doping strategy with additive engineering should help fabricate a black γ-phase perovskite although the mixed phases of δ-CsPbI3, γ-CsPbI3, and Cs4PbI6 were observed under ambient conditions. However, the results may provide insight for the stability of metastable γ-phase CsPbI3 at room temperature.

All-Inorganic CsPbBr3 Perovskite Nanocrystals Synthesized with Olive Oil and Oleylamine at Room Temperature.

Room temperature (RT) synthesis of the ternary cesium lead bromide CsPbBr3 quantum dots with oleic acid and oleylamine ligands was developed by Zeng and coworkers in 2016. In their works, the supersaturated recrystallization (SR) was adopted as a processing method without requiring inert gas and high-temperature injection. However, the oleic acid ligand for haloplumbate is known to be relatively unstable. Hence, in this work, we employed the eco-friendly olive oil to replace the oleic acid portion for the SR process at RT. Resultantly, we found that the cube-shaped nanocrystal has a size of ~40-42 nm and an optical bandgap of ~2.3 eV independent of the surface ligands, but the photoluminescence lifetime (τav) and crystal packing are dependent on the ligand species, e.g., τav = 3.228 ns (olive oil and oleylamine; here less ordered) vs. 1.167 ns (oleic acid and oleylamine). Importantly, we explain the SR mechanism from the viewpoint of the classical LaMer model combined with the solvent engineering technique in details.

g-C3N4-Co3O4 Z-Scheme Junction with Green-Synthesized ZnO Photocatalyst for Efficient Degradation of Methylene Blue in Aqueous Solution.

A simple wet chemical ultrasonic-assisted synthesis method was employed to prepare visible light-driven g-C3N4-ZnO-Co3O4 (GZC) heterojunction photocatalysts. X-ray diffraction (XRD), scanning electromicroscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller (BET), ultraviolet (UV), and electrochemical impedance spectroscopy (EIS) are used to characterize the prepared catalysts. XRD confirms the homogenous phase formation of g-C3N4, ZnO, and Co3O4, and the heterogeneous phase for the composites. The synthesized ZnO and Co3O4 by using cellulose as a template show a rod-like morphology. The specific surface area of the catalytic samples increases due to the cellulose template. The measurements of the energy band gap of a g-C3N4-ZnO-Co3O4 composite showed red-shifted optical absorption to the visible range. The photoluminescence (PL) intensity decreases due to the formation of heterojunction. The PL quenching and EIS result shows that the reduction of the recombination rate and interfacial resistance result in charge carrier kinetic improvement in the catalyst. The photocatalytic performance in the degradation of MB dye of the GZC-3 composite was about 8.2-, 3.3-, and 2.5-fold more than that of the g-C3N4, g-C3N4-ZnO, and g-C3N4-Co3O4 samples. The Mott-Schottky plots of the flat band edge position of g-C3N4, ZnO, Co3O4, and Z-scheme g-C3N4-ZnO-Co3O4 photocatalysts may be created. Based on the stability experiment, GZC-3 shows greater photocatalytic activity after four recycling cycles. As a result, the GZC composite is environmentally friendly and efficient photocatalyst and has the potential to consider in the treatment of dye-contaminated wastewater.

EEG Parameter Selection Reflecting the Characteristics of Internet Gaming Disorder While Playing League of Legends.

Game playing is an accessible leisure activity. Recently, the World Health Organization officially included gaming disorder in the ICD-11, and studies using several bio-signals were conducted to quantitatively determine this. However, most EEG studies regarding internet gaming disorder (IGD) were conducted in the resting state, and the outcomes appeared to be too inconsistent to identify a general trend. Therefore, this study aimed to use a series of statistical processes with all the existing EEG parameters until the most effective ones to identify the difference between IGD subjects IGD and healthy subjects was determined. Thirty subjects were grouped into IGD (n = 15) and healthy (n = 15) subjects by using the Young's internet addition test (IAT) and the compulsive internet use scale (CIUS). EEG data for 16 channels were collected while the subjects played League of Legends. For the exhaustive search of parameters, 240 parameters were tested in terms of t-test, factor analysis, Pearson correlation, and finally logistic regression analysis. After a series of statistical processes, the parameters from Alpha, sensory motor rhythm (SMR), and MidBeta ranging from the Fp1, C3, C4, and O1 channels were found to be best indicators of IGD symptoms. The accuracy of diagnosis was computed as 63.5-73.1% before cross-validation. The most interesting finding of the study was the dynamics of EEG relative power in the 10-20 Hz band. This EEG crossing phenomenon between IGD and healthy subjects may explain why previous research showed inconsistent outcomes. The outcome of this study could be the referential guide for further investigation to quantitatively assess IGD symptoms.

Phase behavior of π-conjugated polymer and non-fullerene acceptor (PTB7-Th:ITIC) solutions and blends.

Phase diagrams of ternary π-bonded polymer (PTB7-Th) solutions were constructed as a function of molecular weight, temperature, and electron acceptor species (ITIC, PC61BM and PC71BM). For this purpose, the Flory-Huggins lattice theory was employed with a constant χ interaction parameter, describing a binodal, spinodal, tie line, and critical point. Then, the morphologies of the blends composed of highly disordered PTB7-Th and crystallizable ITIC were investigated by atomic force microscopy. Subsequently, the surface polarities of the PTB7-Th:ITIC thin films were examined by water contact-angle goniometer, exhibiting a transition at the composition of ~ 60 ± 10 wt.% ITIC. Furthermore, X-ray diffraction indicated the presence of ITIC's crystallites at ≥ 70 wt.% ITIC. Hence, the PTB7-Th:ITIC system was observed to undergo a phase transition at ~ 60-70 wt.% ITIC.

Two-Dimensional Heterostructure of PPy/CNT-E. coli for High-Performance Supercapacitor Electrodes.

The nano-biocomposite electrodes composed of carbon nanotube (CNT), polypyrrole (PPy), and E. coli-bacteria were investigated for electrochemical supercapacitors. For this purpose, PPy/CNT-E. coli was successfully synthesized through oxidative polymerization. The PPy/CNT-E. coli electrode exhibited a high specific capacitance of 173 F∙g-1 at the current density of 0.2 A∙g-1, which is much higher than that (37 F∙g-1) of CNT. Furthermore, it displayed sufficient stability after 1000 charge/discharge cycles. The CNT, PPy/CNT, and PPy/CNT-E. coli composites were characterized by x-ray diffraction, scanning electron microscopy, and surface analyzer (Brunauer-Emmett-Teller, BET). In particular, the pyrrole monomers were easily adsorbed and polymerized on the surface of CNT materials, as well as E. coli bacteria enhanced the surface area and porous structure of the PPy/CNT-E. coli composite electrode resulting in high performance of devices.

Phase behavior of binary and ternary fluoropolymer (PVDF-HFP) solutions for single-ion conductors.

A fluoropolymer poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) has a dielectric constant of ∼11, providing charge screening effects. Hence, this highly polar PVDF-HFP material has been employed as a matrix for solid polymer electrolytes (SPEs). In this study, the phase behavior of binary PVDF-HFP solutions was analyzed using the Flory-Huggins theory, in which ethylene carbonate, propylene carbonate, dimethyl carbonate, γ-butyrolactone, and acetone were employed as model solvents. In particular, for the binary PVDF-HFP/acetone system, the solid-liquid and liquid-liquid phase transitions were qualitatively described. Then, the phase diagram for ternary acetone/PVDF-HFP/polyphenolate systems was constructed, in which the binodal, spinodal, tie-line, and critical point were included. Finally, when a polyelectrolyte lithium polyphenolate was mixed with the PVDF-HFP matrix, it formed a single-ion conductor with a Li+ transference number of 0.8 at 23 °C. In the case of ionic conductivity, it was ∼10-5 S cm-1 in solid state and ∼10-4 S cm-1 in gel state, respectively.

Photoluminescence processes in τ-phase Ba1.3Ca0.7-x-y SiO4:xDy 3+/yTb3+ phosphors for solid-state lighting.

The τ-phase Ba1.3Ca0.7-x-y SiO4:xDy 3+/yTb3+ phosphors co-doped with Dy 3+ (x = 0.03) and Tb3+ (y = 0.01-0.05) trivalent rare-earth ions were prepared by the gel-combustion method. The structure-property relation of the samples was examined by X-ray diffraction, scanning electron microscopy and spectrophotometer. Here, the effect of Tb3+'s concentration on the spectroscopic properties of Ba1.3Ca0.7-x-y SiO4:xDy 3+/yTb3+ phosphors was explored by using the photoluminescence excitation, emission and decay curves. Importantly, the photonic energy transfer from (Dy 3+:4F9/2 + Tb3+:7F6) to (Dy 3+:6H15/2 + Tb3+:5D4) was observed, in which the Dy 3+ ions act as a light-emitting donor whereas the Tb3+ ions as a light-absorbing acceptor, resulting in an enhanced emission from the co-doped Ba1.3Ca0.7-x-y SiO4:xDy 3+/yTb3+ (x = 0.03 and y = 0.01-0.05) phosphors. Finally, the chromaticity coordinates were determined from the measured emission spectra, locating at the green and white light regions. This observation indicates that the characteristic emission colour could be tuned from white to green by varying Tb3+ concentrations under ultraviolet light.

Trivalent rare-earth-codoped silicate phosphor materials (Ba1.3Ca0.7-x-ySiO4:xDy3+/yEu3+) for solid-state lighting.

Trivalent dysprosium/europium-codoped silicate phosphors (Ba1.3Ca0.7x-ySiO4:xDy3+/yEu3+) were prepared as a function of Eu3+concentration (x= 0.03 andy= 0.01-0.05). The phosphors showed the averaged crystallite size of ∼37.2 ± 1.3 nm and displayed nano-/micro-scale grains with some void defects. The energy bandgap is about 4.3 eV for co-doped samples and 3.2 eV for the silicate host. The photoluminescence spectra indicated that the presence of Eu3+ions enhanced the red light emission, and the emission peaks located at the versatile wavelengths of 482, 577, 592, 614, 652, and 703 nm. Then, the internal quantum efficiencies were estimated by using the Judd-Ofelt model. Resultantly, the best quantum efficiency was ∼74% when the doping concentrations were 3 mol% Dy3+and 4 mol% Eu3+ions. Finally, the CIE coordinate data exhibited that the emission color could be tuned from white to reddish-orange by changing the Eu3+contents, proposing the applicability of Ba1.3Ca0.7-x-ySiO4:xDy3+/yEu3+phosphors to the solid-state lighting.

Identification of Video Game Addiction Using Heart-Rate Variability Parameters.

The purpose of this study is to determine heart rate variability (HRV) parameters that can quantitatively characterize game addiction by using electrocardiograms (ECGs). 23 subjects were classified into two groups prior to the experiment, 11 game-addicted subjects, and 12 non-addicted subjects, using questionnaires (CIUS and IAT). Various HRV parameters were tested to identify the addicted subject. The subjects played the League of Legends game for 30-40 min. The experimenter measured ECG during the game at various window sizes and specific events. Moreover, correlation and factor analyses were used to find the most effective parameters. A logistic regression equation was formed to calculate the accuracy in diagnosing addicted and non-addicted subjects. The most accurate set of parameters was found to be pNNI20, RMSSD, and LF in the 30 s after the "being killed" event. The logistic regression analysis provided an accuracy of 69.3% to 70.3%. AUC values in this study ranged from 0.654 to 0.677. This study can be noted as an exploratory step in the quantification of game addiction based on the stress response that could be used as an objective diagnostic method in the future.

Phase Diagrams of Ternary π-Conjugated Polymer Solutions for Organic Photovoltaics.

Phase diagrams of ternary conjugated polymer solutions were constructed based on Flory-Huggins lattice theory with a constant interaction parameter. For this purpose, the poly(3-hexylthiophene-2,5-diyl) (P3HT) solution as a model system was investigated as a function of temperature, molecular weight (or chain length), solvent species, processing additives, and electron-accepting small molecules. Then, other high-performance conjugated polymers such as PTB7 and PffBT4T-2OD were also studied in the same vein of demixing processes. Herein, the liquid-liquid phase transition is processed through the nucleation and growth of the metastable phase or the spontaneous spinodal decomposition of the unstable phase. Resultantly, the versatile binodal, spinodal, tie line, and critical point were calculated depending on the Flory-Huggins interaction parameter as well as the relative molar volume of each component. These findings may pave the way to rationally understand the phase behavior of solvent-polymer-fullerene (or nonfullerene) systems at the interface of organic photovoltaics and molecular thermodynamics.

Morphology and surface analyses for CH3NH3PbI3 perovskite thin films treated with versatile solvent-antisolvent vapors.

Organometal halide perovskite (CH3NH3PbI3) semiconductors have been promising candidates as a photoactive layer for photovoltaics. Especially for high performance devices, the crystal structure and morphology of this perovskite layer should be optimized. In this experiment, by employing solvent-antisolvent vapor techniques during a modified sequential deposition of PbI2-CH3NH3I layers, the morphology engineering was carried out as a function of antisolvent species such as: chloroform, chlorobenzene, dichlorobenzene, toluene, and diethyl ether. Then, the optical, morphological, structural, and surface properties were characterized. When dimethyl sulfoxide (DMSO, solvent) and diethyl ether (antisolvent) vapors were employed, the CH3NH3PbI3 layer exhibited relatively desirable crystal structures and morphologies, resulting in an optical bandgap (E g) of 1.61 eV, crystallite size (t) of 89.5 nm, and high photoluminescence (PL) intensity. Finally, the stability of perovskite films toward water was found to be dependent on the morphologies with defects such as grain boundaries, which was evaluated through contact angle measurement.

Evaluation of fatigue patterns in individual shoulder muscles under various external conditions.

For shoulder muscle prevention, we investigated individual shoulder muscle performance and fatigue patterns in various external conditions, including three different % maximum voluntary contractions, six shoulder angles and 60-s durations of exertion. The rating of perceived exertion was also measured for comparison. The upper trapezius (UT), middle deltoid (MD), pectoralis major (PM), latissimus dorsi (LD) and serratus anterior (SA) were selected for assessment. Normalized median power frequency electromyograms were calculated for quantitative fatigue evaluation in ten participants. UT muscle was severely fatigued by extreme flexion angle rather than weight. MD muscle was the most rapidly fatigued after 15 s duration. SA muscle was more fatigued at 0° than 30° adduction. LD and PM muscle fatigue were mostly due to external workload. This muscle specific outcome could help practitioners to design an intervention program targeting particular shoulder injury.

Phase Behavior of Amorphous/Semicrystalline Conjugated Polymer Blends.

We report the phase behavior of amorphous/semicrystalline conjugated polymer blends composed of low bandgap poly[2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta [2,1-b;3,4-b']dithiophene) -alt-4,7(2,1,3-benzothiadiazole)] (PCPDTBT) and poly{(N,N'-bis(2-octyldodecyl)naphthalene -1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)). As usual in polymer blends, these two polymers are immiscible because ΔSm ≈ 0 and ΔHm > 0, leading to ΔGm > 0, in which ΔSm, ΔHm, and ΔGm are the entropy, enthalpy, and Gibbs free energy of mixing, respectively. Specifically, the Flory-Huggins interaction parameter (χ) for the PCPDTBT /P(NDI2OD-T2) blend was estimated to be 1.26 at 298.15 K, indicating that the blend was immiscible. When thermally analyzed, the melting and crystallization point depression was observed with increasing PCPDTBT amounts in the blends. In the same vein, the X-ray diffraction (XRD) patterns showed that the π-π interactions in P(NDI2OD-T2) lamellae were diminished if PCPDTBT was incorporated into the blends. Finally, the correlation of the solid-liquid phase transition and structural information for the blend system may provide insight for understanding other amorphous/semicrystalline conjugated polymers used as active layers in all-polymer solar cells, although the specific morphology of a film is largely affected by nonequilibrium kinetics.

A DNA and Self-Doped Conjugated Polyelectrolyte Assembled for Organic Optoelectronics and Bioelectronics.

Deoxyribonucleic acid (DNA) and a self-doped conjugated polyelectrolyte, poly(4-(2,3-dihydrothieno[3,4-b]-[1,4]dioxin-2-yl-methoxy)-1-butanesulfonic acid (PEDOT-S), are assembled for organic optoelectronics and bioelectronics. The DNA's helix-coil phase transition in water is studied as a function of composition by thermo-optical analysis. DNA and PEDOT-S are functionalized by using a surfactant, cetyltrimethylammonium chloride (CTMA), and DNA:CTMA, PEDOT-S:CTMA, and DNA:CTMA:PEDOT-S:CTMA complexes were characterized regarding thermal, optical, morphological, and structural properties. Finally, DNA and DNA:PEDOT-S mixtures are processed in water for fabricating organized films through brushing. The electrical properties of these films are characterized using an interdigitated electrode. The films show an electronic conductivity of ∼10-6-10-5 S/cm in a range of semiconductors.

Erratum: Phase Diagrams of n-Type Low Bandgap Naphthalenediimide-Bithiophene Copolymer Solutions and Blends. Polymers 2019, 11, 1474.

The authors wish to make a change to the published paper [...].

Phase Diagrams of n-Type Low Bandgap Naphthalenediimide-Bithiophene Copolymer Solutions and Blends.

Phase diagrams of n-type low bandgap poly{(N,N'-bis(2-octyldodecyl)naphthalene -1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-5,5',-(2,2'-bithiophene)} (P(NDI2OD-T2)) solutions and blends were constructed. To this end, we employed the Flory-Huggins (FH) lattice theory for qualitatively understanding the phase behavior of P(NDI2OD-T2) solutions as a function of solvent, chlorobenzene, chloroform, and p-xylene. Herein, the polymer-solvent interaction parameter (χ) was obtained from a water contact angle measurement, leading to the solubility parameter. The phase behavior of these P(NDI2OD-T2) solutions showed both liquid-liquid (L-L) and liquid-solid (L-S) phase transitions. However, depending on the solvent, the relative position of the liquid-liquid phase equilibria (LLE) and solid-liquid phase equilibria (SLE) (i.e., two-phase co-existence curves) could be changed drastically, i.e., LLE > SLE, LLE ≈ SLE, and SLE > LLE. Finally, we studied the phase behavior of the polymer-polymer mixture composed of P(NDI2OD-T2) and regioregular poly(3-hexylthiophene-2,5-dyil) (r-reg P3HT), in which the melting transition curve was compared with the theory of melting point depression combined with the FH model. The FH theory describes excellently the melting temperature of the r-reg P3HT/P(NDI2OD-T2) mixture when the entropic contribution to the polymer-polymer interaction parameter (χ = 116.8 K/T -0.185, dimensionless) was properly accounted for, indicating an increase of entropy by forming a new contact between two different polymer segments. Understanding the phase behavior of the polymer solutions and blends affecting morphologies plays an integral role towards developing polymer optoelectronic devices.

Humanized Anti-hepatocyte Growth Factor Monoclonal Antibody (YYB-101) Inhibits Ovarian Cancer Progression.

Current chemotherapy regimens have certain limitations in improving the survival rates of patients with advanced ovarian cancer. Hepatocyte growth factor (HGF) is important in ovarian cancer cell migration and invasion. This study assessed the effects of YYB-101, a humanized monoclonal anti-HGF antibody, on the growth and metastasis of ovarian cancer cells. YYB-101 suppressed the phosphorylation of the HGF receptor c-MET and inhibited the migration and invasion of SKOV3 and A2780 ovarian cancer cells. Moreover, the combination of YYB-101 and paclitaxel synergistically inhibited tumor growth in an in vivo ovarian cancer mouse xenograft model and significantly increased the overall survival (OS) rate compared with either paclitaxel or YYB-101 alone. Taken together, these findings suggest that YYB-101 has therapeutic potential in ovarian cancer when combined with conventional chemotherapy agents.