Protein, Amino Acid, Oil, Fatty Acid, Sugar, Anthocyanin, Isoflavone, Lutein, and Antioxidant Variations in Colored Seed-Coated Soybeans.

Different physiological and genetic studies show that the variations in the accumulation of pigment-stimulating metabolites result in color differences in soybean seed coats. The objective of this study was to analyze the nutrient contents and antioxidant potential in black, brown, and green seed-coated soybeans. Significant variations in protein (38.9-43.3%), oil (13.9-20.4%), total sugar (63.5-97.0 mg/g seed), total anthocyanin (3826.0-21,856.0 µg/g seed coat), total isoflavone (709.5-3394.3 µg/g seed), lutein (1.9-14.8 µg/g), total polyphenol (123.0-385.8 mg gallic acid/100 g seed), total flavonoid (22.1-208.5 mg catechin/100 g seed), 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid (ABTS; 275.0-818.8 mg Trolox/100 g seed), and 2,2-diphenyl-1-picrylhydrazyl (DPPH; 96.3-579.7 mg Trolox/100 g seed) were found among the soybean genotypes. Ilpumgeomjeong2 contained the lowest protein but the highest oil and total sugar. The lowest oil-containing Wonheug had the highest protein content. Socheong2 was rich in all four variables of antioxidants. Anthocyanins were detected only in black soybeans but not in brown and green soybeans. The variation in isoflavone content was up to 5-fold among the soybean genotypes. This study could be a valuable resource for the selection and improvement of soybean because an understanding of the nutrient content and antioxidant potentials is useful to develop effective strategies for improving the economic traits; for example, the major emphasis of soybean breeding for fatty acids is to enhance the oleic and linoleic acid contents and to decrease linolenic acid content.

A High-Throughput Single-Clone Phage Fluorescence Microwell Immunoassay and Laser-Driven Clonal Retrieval System.

Phage display is one of the most frequently used platform technologies utilized to screen and select therapeutic antibodies, and has contributed to the development of more than 10 therapeutic antibodies used in the clinic. Despite advantages like efficiency and low cost, it has intrinsic technical limitations, such as the asymmetrical amplification of the library after each round of biopanning, which is regarded as a reason for it yielding a very limited number of antigen binders. In this study, we developed a high-throughput single-clonal screening system comprised of fluorescence immunoassays and a laser-driven clonal DNA retrieval system using microchip technology. Using this system, from a single-chain variable fragment (scFv) library displayed on phages with a complexity of 5.21 × 105 harboring random mutations at five amino acid residues, more than 70,000 clones-corresponding to ~14% of the library complexity-were screened, resulting in 78 antigen-reactive scFv sequences with mutations restricted to the randomized residues. Our results demonstrate that this system can significantly reduce the number of biopanning rounds, or even eliminate the need for this process for libraries with lower complexity, providing an opportunity to obtain more diverse clones from the library.

Comparison of the quality of dried persimmon (Diospyros kaki THUNB.) treated with medicinal plant extracts and food additives.

We evaluated the direct application of different extracts from plant-derived compounds at different ratios. The best effect was observed with the combination of 18.18% clove, 9.90% cinnamon, 9.09% licorice, 4.55% firmament, 4.55% grapefruit seed extract, and 54.54% apple cider vinegar. The combination of these compounds improved the moisture content of the fruit and showed antifungal, antibrowning, and antifungal/antibrowning effects as compared with the control following 6-week treatment. The treatment resulted in an increase in the overall sugar concentration of dried persimmons. Antibrowning/antifungal test showed high sugar content of 30-39 °brix. The hardness of the treatment groups was similar to that of the control and decreased by 0.5 to 0.8 after 6 weeks. The evaluation of color change revealed a decreasing tendency in the value of △E during the drying period. Thus, natural extracts effectively suppressed the quality degradation during drying of persimmon and may be used to replace sulfur fumigation.

Hierarchical shape-by-shape assembly of microparticles for micrometer-scale viral delivery of two different genes.

Understanding tissue engineering using a bottom-up approach has been hindered by technical limitations because no platform can demonstrate the controlled formation of a heterogeneous population of cells in microscale. Here, we demonstrate hierarchical shape-by-shape assembly of virus-laden particles into larger ones to transfect two different genes on the seeded cells. We show that smaller daughter particles with different sizes and shapes can be assembled into the matching indentations of larger parent particles with different sizes and shapes. Then, we transfected a population of cells with two different gene-transfecting viruses, each of which was laden on the parent or daughter particles.

Correction: Liquid-capped encoded microcapsules for multiplex assays.

Correction for 'Liquid-capped encoded microcapsules for multiplex assays' by Younghoon Song et al., Lab Chip, 2017, DOI: .

Liquid-capped encoded microcapsules for multiplex assays.

Although droplet microfludics is a promising technology for handling a number of liquids of a single type of analyte, it has limitations in handling thousands of different types of analytes for multiplex assay. Here, we present a novel "liquid-capped encoded microcapsule", which is applicable to various liquid format assays. Various liquid drops can be graphically encoded and arrayed without repeated dispensing processes, evaporation, and the risk of cross-contamination. Millions of nanoliter-scale liquids are encapsulated within encoded microcapsules and self-assembled in microwells in a single dispensing process. The graphical code on the microcapsule enables identification of randomly assembled microcapsules in each microwell. We conducted various liquid phase assays including enzyme inhibitor screening, virus transduction, and drug-induced apoptosis tests. The results showed that our liquid handling technology can be utilized widely for various solution phase assays.

Characterization and development of EST-SSR markers in sweet potato (Ipomoea batatas (L.) Lam).

In this study, a cDNA library was constructed from the total RNA of sweet potato leaves. A total of 789 copies of the cDNA were cloned in Escherichia coli by employing the pGEM-T Easy vector. Sequencing was carried out by Solgent Co. (Korea). As many as 579 expressed sequence tag-simple sequence repeat (EST-SSR) markers were designed (73.38%) from the known cDNA nucleotide base sequences. The lengths of the developed EST-SSR markers ranged from 100 to 499 bp (average length 238 bp). Their motif sequence types were varied, with most being dinucleotides and pentanucleotides, and the most commonly found motifs were CAGAAT (29.0%) and TCT (2.8%). Based on these SSR-containing sequences, 619 pairs of high-quality SSR primers were designed using WebSat and Primer3web. The total number of primers designed was 144. Polymorphism was evident in 82 EST-SSR markers among 20 Korean sweet potato cultivars tested and in 90 EST-SSR markers in the two parents of a mapping population, Yeseumi and Annobeny. In this study, the hexaploid sweet potato (2n = 6x = 90) EST-SSR markers were developed in the absence of full-sequence data. Moreover, by acting as a molecular tag for particular traits, the EST-SSR marker can also simultaneously identify information about the corresponding gene. These EST-SSR markers will allow the molecular analysis of sweet potato to be done more efficiently. Thus, we can develop high-quality sweet potato while overcoming the challenges from climate change and other unfavorable conditions.

Biomimetic microfingerprints for anti-counterfeiting strategies.

An unclonable, fingerprint-mimicking anti-counterfeiting strategy is presented that encrypts polymeric particles with randomly generated silica film wrinkles. The generated wrinkle codes are as highly unique as human fingerprints and are technically irreproducible. Superior to previous physical unclonable functions, codes are tunable on demand and generable on various geometries. Reliable authentication of real-world products that have these microfingerprints is demonstrated using optical decoding methods.

Potentiometric multichannel cytometer microchip for high-throughput microdispersion analysis.

The parallelization of microfluidic cytometry is expected to lead to considerably enhanced throughput enabling point-of-care diagnosis. In this article, the development of a microfluidic potentiometric multichannel cytometer is presented. Parallelized microfluidic channels sharing a fluid path inevitably suffer from interchannel signal crosstalk that results from electrical coupling within the microfluidic channel network. By employing three planar electrodes within a single detection channel, we electrically decoupled each channel unit, thereby enabling parallel analysis by using a single cytometer microchip with multiple microfluidic channels. The triple-electrode configuration is validated by analyzing the size and concentration of polystyrene microbeads (diameters: 1.99, 2.58, 3, and 3.68 µm; concentration range: ∼2 × 10(5) mL(-1) to ∼1 × 10(7) mL(-1)) and bacterial microdispersion samples (Bacillus subtilis, concentration range: ∼4 × 10(5) CFU mL(-1) to ∼3 × 10(6) CFU mL(-1)). Crosstalk-free parallelized analysis is then demonstrated using a 16-channel potentiometric cytometer (maximum cross-correlation coefficients |r|: < 0.13 in all channel combinations). A detection throughput of ∼48,000 s(-1) was achieved; the throughout can be easily increased with the degree of parallelism of a single microchip without additional technical complexities. Therefore, this methodology should enable high-throughput and low-cost cytometry.

Lithographically encoded polymer microtaggant using high-capacity and error-correctable QR code for anti-counterfeiting of drugs.

A QR-coded microtaggant for the anti-counterfeiting of drugs is proposed that can provide high capacity and error-correction capability. It is fabricated lithographically in a microfluidic channel with special consideration of the island patterns in the QR Code. The microtaggant is incorporated in the drug capsule ("on-dose authentication") and can be read by a simple smartphone QR Code reader application when removed from the capsule and washed free of drug.

Lithographic compartmentalization of emulsion droplet templates for microparticles with multiple nanostructured compartments.

Complicated functional microparticles with complex nanostructured compartments have been synthesized from emulsion templates by lithographic compartment allocations. Our 'top-down-bottom-up' hybrid method will provide additional material engineering capability for the synthesis of advanced functional microparticles.

Programming magnetic anisotropy in polymeric microactuators.

Polymeric microcomponents are widely used in microelectromechanical systems (MEMS) and lab-on-a-chip devices, but they suffer from the lack of complex motion, effective addressability and precise shape control. To address these needs, we fabricated polymeric nanocomposite microactuators driven by programmable heterogeneous magnetic anisotropy. Spatially modulated photopatterning was applied in a shape-independent manner to microactuator components by successive confinement of self-assembled magnetic nanoparticles in a fixed polymer matrix. By freely programming the rotational axis of each component, we demonstrate that the polymeric microactuators can undergo predesigned, complex two- and three-dimensional motion.

Single exposure fabrication and manipulation of 3D hydrogel cell microcarriers.

We present a simple and high-throughput method for fabricating free-floating hydrogel cell microcarriers using single exposure UV patterning. We also demonstrate magnetic manipulation of the free-floating cell microcarriers using a magnetic nanoparticle-embedded structure for an active agitation and a solution exchange.

Three-dimensional assembly of nanoparticles from charged aerosols.

The capability of assembling nanoparticles into a desired ordered pattern is a key to realize novel devices which are based not only on the unique properties of nanoparticles but also on the arrangements of nanoparticles. While two-dimensional arrays of nanoparticles have been successfully demonstrated by various techniques, a controlled way of building ordered arrays of three-dimensional (3D) nanoparticle structures remains challenging. We report that a variety of 3D nanoparticle structures can be formed in a controlled way based on the ion-induced focusing, electrical scaffold, and antenna effects from charged aerosols. Particle trajectory calculations successfully predict the whole process of 3D assembly. New surface enhanced Raman scattering substrates based on our 3D assembly were constructed as an example showing the viability of the present approach. This report extends the current capability of positioning nanoparticles on surface to another spatial dimension, which can serve as the foundation of future optical, magnetic, and electronic devices taking the advantage of multidimensions.

Colour-barcoded magnetic microparticles for multiplexed bioassays.

Encoded particles have a demonstrated value for multiplexed high-throughput bioassays such as drug discovery and clinical diagnostics. In diverse samples, the ability to use a large number of distinct identification codes on assay particles is important to increase throughput. Proper handling schemes are also needed to readout these codes on free-floating probe microparticles. Here we create vivid, free-floating structural coloured particles with multi-axis rotational control using a colour-tunable magnetic material and a new printing method. Our colour-barcoded magnetic microparticles offer a coding capacity easily into the billions with distinct magnetic handling capabilities including active positioning for code readouts and active stirring for improved reaction kinetics in microscale environments. A DNA hybridization assay is done using the colour-barcoded magnetic microparticles to demonstrate multiplexing capabilities.

Optofluidic in situ maskless lithography of charge selective nanoporous hydrogel for DNA preconcentration.

An optofluidic maskless photopolymerization process was developed for in situ negatively charged nanoporous hydrogel [poly-AMPS (2-acrylamido-2-methyl-1-propanesulfonic acid)] fabrication. The optofluidic maskless lithography system, which combines a high power UV source and digital mirror device, enables fast polymerization of arbitrary shaped hydrogels in a microfluidic device. The poly-AMPS hydrogel structures were positioned near the intersections of two microchannels, and were used as a cation-selective filter for biological sample preconcentration. Preconcentration dynamics as well as the fabricated polymer shape were analyzed in three-dimensions using fluorescein sample and a confocal microscope. Finally, single-stranded DNA preconcentration was demonstrated for polymerase chain reaction-free signal enhancement.

Magnetochromatic microspheres: rotating photonic crystals.

Magnetochromatic microspheres have been fabricated through instant assembly of superparamagnetic (SPM) colloidal particles inside emulsion droplets of UV curable resin followed by an immediate UV curing process to polymerize the droplets and fix the ordered structures. When dispersed in the liquid droplets, superparamagnetic Fe(3)O(4)@SiO(2) core/shell particles self-organize under the balanced interaction of repulsive and attractive forces to form one-dimensional chains, each of which contains periodically arranged particles diffracting visible light and displaying field-tunable colors. UV initiated polymerization of the oligomers of the resin fixes the periodic structures inside the droplet microspheres and retains the diffraction property. Because the superparamagnetic chains tend to align themselves along the field direction, it is very convenient to control the orientation of such photonic microspheres and, accordingly, their diffractive colors, by changing the orientation of the crystal lattice relative to the incident light using magnetic fields. The excellent stability together with the capability of fast on/off switching of the diffraction by magnetic fields makes the system suitable for applications such as color display, rewritable signage, and sensors. As a simple demonstration, we have fabricated a display unit that has on/off bistable states by embedding the magnetochromatic microspheres in a matrix that can thermally switch between solid and liquid phases.