Flexible Centrifugally Spun N, S-Doped SnS2-Including Porous Carbon Nanofiber Electrodes for Na-Ion Batteries.

Carbon nanofibers are promising for various applications such as energy storage, sensors, and biomedical applications; however, the brittle structure of nanofibers limits the usage of carbon nanofibers. For the first time, a facile and effective strategy is reported to fabricate flexible carbon nanofibers via a fast and safe nanofiber fabrication technique, centrifugal spinning, followed by heat treatment. Moreover, sulfidization was employed to fabricate high-performance flexible N, S-doped SnS2-including porous carbon nanofiber electrodes for sodium ion batteries via centrifugal spinning. Binder-free flexible centrifugally spun N, S-doped SnS2-including porous carbon nanofiber electrodes delivered a high reversible capacity of over 460 mAh/g at 100 mA/g. Furthermore, at a high current density of 1 A/g, the electrodes showed a reversible capacity of over 300 mAh/g with excellent cycling stability in 2000 cycles. This work reports a fast, low-cost, and facile way to prepare flexible carbon nanofibers with tunable morphology and various compositions, which could be applicable for different energy storage applications.

Harnessing bio-based chelating agents for sustainable synthesis of AgNPs: Evaluating their inherent attributes and antimicrobial potency in conjunction with honey.

Greenly synthesized nanoparticles have garnered attention due to their low environmental footprint, but impurities limit their applications. A novel semi-organic method for synthesizing silver nanoparticles (AgNPs) using bio-based chelating fuels (Beta vulgaris subsp., Spinacia oleracea, and Ipomoea batatas) reduces the undesirable impurities. The study also showcases the impact of bio-based chelating fuel on various characteristics of AgNPs in comparison to synthetic chelating fuel. The antimicrobial efficacy of the synthesized AgNPs in conjunction with honey was also assessed against E. coli. The XRD analysis showed cubic structure of AgNPs. The FESEM and TEM analysis showed that the well-connected spherical-shaped AgNPs (∼3-120 nm diameter) while EDS confirmed the presence of Ag in all samples. The TEM analysis also revealed layers of carbonates in AgNPs synthesized using bio-based chelating fuels. XPS investigation confirmed the absence of any prominent impurities in prepared samples and AgNPs have not experienced oxidation on their surface. However, notable surface charging effects due to the uneven conductivity of the particles were observed. The broth dilution method showed that all mixtures containing AgNPs in combination with honey exhibited a significant bacterial growth reduction over a period of 120 h. The highest growth reduction of ∼75 % is obtained for the mixture having AgNPs (Ipomoea batatas) while the least growth reduction of ∼51 % is obtained for the mixture having AgNPs (Beta vulgaris subsp.). The findings affirm that AgNPs can be successfully synthesized using bio-based chelating fuels with negligible ecological consequences and devoid of contaminants. Moreover, the synthesized AgNPs can be employed in conjunction with honey for antibacterial purposes.

Innovative tarantula hair-inspired washing machine filters for enhanced microfiber capture.

Aquatic environments are being polluted by microplastics primarily originating from the washing of synthetic textiles. Microfibers (MF), which are microplastics in synthetic fibers, are consistently introduced into the environment with each domestic laundry cycle. To address this issue, we developed a specialized MF capture "barbed filter" (BF) by transforming PET monofilaments of different diameters (0.4, 0.6, and 0.8 mm) into structures that closely resemble the characteristics of tarantula urticating hairs. BFs feature sharp barbs that effectively capture and retain microfibers of diverse lengths, surpassing the performance of conventional control filters. The BFs had a retention efficiency of 88-91 %, while the CFs had an efficiency of 79-86 %. Our findings revealed that the barbed filter significantly outperformed the conventional control filter in capturing microfibers due to its smaller pore size, shorter pore distance, and unique filter shape. This design not only enhances the surface area and friction, facilitating microfibril strong entrapment but also minimizes the probability of microfibril passage through the filter. This research offers a promising solution for reducing microfibril release from laundry and textile industrial wastewater. The implementation of BFs in real life has the potential to significantly reduce microplastic pollution and promote a cleaner and more sustainable environment.

Enhancing Textile Water Repellency with Octadecyltrichlorosilane (OTS) and Hollow Silica Nanoparticles.

Superhydrophobic coatings have attracted substantial attention owing to their potential application in various industries. Conventional textiles used in daily life are prone to staining with water and household liquids, necessitating the development of water-repellent and stain-resistant coatings. In this study, we fabricated a highly water-repellent superhydrophobic PET fabric by using an eco-friendly water-based coating process. Fluorine-free octadecyltrichlorosilane (OTS) solutions with various wt.% of hollow silica (HS) nanoparticles were used to produce a superhydrophobic surface via a facile dip coating method. Our findings revealed that the incorporation of HS nanoparticles substantially increased the water contact angle, with higher concentrations resulting in enhanced water repellency and increased surface roughness. The treated fabrics had a remarkable water contact angle of 152.4° ± 0.8°, demonstrating their superhydrophobic fiber surface. In addition, the durability of these superhydrophobic properties was investigated via a laundry procedure, which showed that the fabrics maintained their water repellency even after 20 laundering cycles. EDX and XRD analyses confirmed that the morphological evaluations did not reveal any substantial structural alterations. Significantly, the fibers maintained their strength and durability throughout the testing, enduring only minor hollow SiO2 nanoparticle loss. This eco-friendly and cost-effective method holds great potential for application in apparel and other industries, offering an effective solution to resist water stains and improve performance in various contexts.

Centrifugally Spun Binder-Free N, S-Doped Ge@PCNF Anodes for Li-Ion and Na-Ion Batteries.

Germanium has a high theoretical capacity as an anode material for sodium-ion batteries. However, germanium suffers from large capacity losses during cycling because of the large volume change and loss of electronic conductivity. A facile way to prepare germanium anodes is critically needed for next-generation electrode materials. Herein, centrifugally spun binder-free N, S-doped germanium@ porous carbon nanofiber (N, S-doped Ge@ PCNFs) anodes first were synthesized using a fast, safe, and scalable centrifugal spinning followed by heat treatment and N, S doping. The morphology and structure of the resultant N, S-doped Ge@ PCNFs were investigated by scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray mapping, Raman spectroscopy, and X-ray diffraction, while electrochemical performance of N, S-doped Ge@ PCNFs was studied using galvanostatic charge-discharge tests. The results demonstrate that a nanostructured Ge homogeneously distributed on tubular structured porous carbon nanofibers. Moreover, N, S doping via thiourea treatment is beneficial for lithium- and sodium-ion kinetics. While interconnected PCNFs buffered volume change and provided fast diffusion channels for Li ions and Na ions, N, S-doped PCNFs further improved electronic conductivity and thus led to higher reversible capacity with better cycling performance. When investigated as an anode for lithium-ion and sodium-ion batteries, high reversible capacities of 636 and 443 mAhg-1, respectively, were obtained in 200 cycles with good cycling stability. Centrifugally spun binder-free N, S-doped Ge@ PCNFs delivered a capacity of 300 mAhg-1 at a high current density of 1 A g-1, indicating their great potential as an anode material for high-performance sodium-ion batteries.

N-Doped carbon nanoparticles on highly porous carbon nanofiber electrodes for sodium ion batteries.

Nitrogen doped carbon nanoparticles on highly porous carbon nanofiber electrodes were successfully synthesized via combining centrifugal spinning, chemical polymerization of pyrrole and a two-step heat treatment. Nanoparticle-on-nanofiber morphology with highly porous carbon nanotube like channels were observed from SEM and TEM images. Nitrogen doped carbon nanoparticles on highly porous carbon nanofiber (N-PCNF) electrodes exhibited excellent cycling and C-rate performance with a high reversible capacity of around 280 mA h g-1 in sodium ion batteries. Moreover, at 1000 mA g-1, a high reversible capacity of 172 mA h g-1 was observed after 300 cycles. The superior electrochemical properties were attributed to a highly porous structure with enlarged d-spacings, enriched defects and active sites due to nitrogen doping. The electrochemical results prove that N-PCNF electrodes are promising electrode materials for high performance sodium ion batteries.

Centrifugally Spun PVA/PVP Based B, N, F Doped Carbon Nanofiber Electrodes for Sodium Ion Batteries.

Owing to their high electrical conductivity, high surface area, low density, high thermal stability, and chemical stability, carbon nanofibers have been used in many fields, including energy storage, electromagnetic shielding, filtering, composites, sensors, and tissue engineering. Considering the environmental impact of petroleum-based polymers, it is vital to fabricate carbon nanofibers from environmentally-friendly materials using fast and safe techniques. PVA/PVP nanofibers were fabricated via centrifugal spinning and the effects of variations in the PVP content on the morphology and thermal properties of PVA/PVP-blend nanofibers were studied using SEM and DSC analyses. Moreover, the effects of carbonization conditions, including stabilization time, stabilization temperature, carbonization time, and carbonization temperature on the morphology and carbon yield, were investigated. Centrifugally spun PVA/PVP-based carbon nanofiber electrodes with an average fiber diameter around 300 nm are reported here for the first time. Furthermore, centrifugally spun PVA/PVP-based B, N, F-doped carbon nanofibers were fabricated by combining centrifugal spinning and heat treatment. Through B, N, F doping, CNFs demonstrated a high reversible capacity of more than 150 mAh/g in 200 cycles with stable cycling performance.

Hollow TiO2/Poly (Vinyl Pyrrolidone) Fibers Obtained via Coaxial Electrospinning as Easy-to-Handle Photocatalysts for Effective Nitrogen Oxide Removal.

Herein, we present a method for fabricating hollow TiO2 microfibers from Ti (OBu)4/poly (vinyl pyrrolidone) sol-gel precursors and their effects on denitrification as a photocatalyst for air purification. Various sizes of hollow TiO2 fibers were developed using coaxial electrospinning by controlling the core flow rate from 0 to 3 mL h-1. At higher flow rates, the wall layer was thinner, and outer and core diameters were larger. These features are correlated with physical properties, including specific surface area, average pore diameter, and crystalline structure. The increase in the core flow rate from 0 to 3 mL h-1 leads to a corresponding increase in the specific surface area from 1.81 to 3.95 µm and a decrease in the average pore diameter from 28.9 to 11.1 nm. Furthermore, the increased core flow rate results in a high anatase and rutile phase content in the structure. Herein, hollow TiO2 was produced with an approximately equal content of anatase/rutile phases with few impurities. A flow rate of 3 mL h-1 resulted in the highest specific surface area of 51.28 m2 g-1 and smallest pore diameter size of ~11 nm, offering more active sites at the fiber surface for nitrogen oxide removal of up to 66.2% from the atmosphere.

MoS2-Decorated Graphene@porous Carbon Nanofiber Anodes via Centrifugal Spinning.

Sodium-ion batteries (SIBs) are promising alternatives to lithium-ion batteries as green energy storage devices because of their similar working principles and the abundance of low-cost sodium resources. Nanostructured carbon materials are attracting great interest as high-performance anodes for SIBs. Herein, a simple and fast technique to prepare carbon nanofibers (CNFs) is presented, and the effects of carbonization conditions on the morphology and electrochemical properties of CNF anodes in Li- and Na-ion batteries are investigated. Porous CNFs containing graphene were fabricated via centrifugal spinning, and MoS2 were decorated on graphene-included porous CNFs via hydrothermal synthesis. The effect of MoS2 on the morphology and the electrode performance was examined in detail. The results showed that the combination of centrifugal spinning, hydrothermal synthesis, and heat treatment is an efficient way to fabricate high-performance electrodes for rechargeable batteries. Furthermore, CNFs fabricated at a carbonization temperature of 800 °C delivered the highest capacity, and the addition of MoS2 improved the reversible capacity up to 860 mAh/g and 455 mAh/g for Li- and Na-ion batteries, respectively. A specific capacity of over 380 mAh/g was observed even at a high current density of 1 A/g. Centrifugal spinning and hydrothermal synthesis allowed for the fabrication of high-performance electrodes for sodium ion batteries.

Exploring the Diverse Morphology of Porous Poly(Lactic Acid) Fibers for Developing Long-Term Controlled Antibiotic Delivery Systems.

In this study, we aimed to explore the morphologies of porous poly(lactic acid) (PLA) fibers through liquid−liquid phase separation, and investigate the relationship among pore formation, physical properties, and antibacterial activities of the fibers for identifying their potential as drug delivery carriers. Antibacterial activities of gentamicin-, kanamycin-, and amikacin-loaded PLA fibers against E. coli and S. epidermidis were evaluated. The antibacterial activity of drugs against E. coli showed the following profile: gentamicin > amikacin > kanamycin; however, S. epidermidis growth was almost completely inhibited immediately after the administration of all three drugs. The efficiency of gentamicin can be attributed to the electrostatic interactions between the positively and negatively charged antibiotic and bacterial cell membrane, respectively. Furthermore, gentamicin-loaded porous PLA fibers were evaluated as drug delivery systems. The cumulative amount of gentamicin in porous PLA nanofibers was considerably higher than that in other PLA fibers for 168 h, followed by 7:3 PLA > 6:4 PLA > 5:5 PLA > non-porous PLA. The 7:3 PLA fibers were projected to be ideal drug carrier candidates for controlled antibiotic release in delivery systems owing to their interconnected internal structure and the largest surface area (55.61 m2 g−1), pore size (42.19 nm), and pore volume (12.78 cm3 g−1).

The Bacterial Control of Poly (Lactic Acid) Nanofibers Loaded with Plant-Derived Monoterpenoids via Emulsion Electrospinning.

Plant-derived monoterpenoids have been shown to possess various biological effects, providing a scientific basis for their potential usage as antibacterial agents. Therefore, considering problems surrounding bacteria's antibacterial resistance, the utilization of natural antimicrobial compounds such as monoterpenoids in different industries has gained much attention. The aim of this study was to fabricate and characterize various concentrations of plant-derived monoterpenoids, geraniol (G) and carvacrol (C), loaded into poly(lactic acid) (PLA) nanofibers via emulsion electrospinning. The antibacterial activities of the fabricated nanofibers were evaluated using three types of antibacterial assays (inhibition zone tests, live/dead bacterial cell assays, and antibacterial kinetic growth assays). Among the samples, 10 wt% carvacrol-loaded PLA nanofibers (C10) had the most bactericidal activity, with the widest inhibition zone of 5.26 cm and the highest visible dead bacteria using the inhibition zone test and live/dead bacterial cell assay. In order to quantitatively analyze the antibacterial activities of 5 wt% carvacrol-loaded PLA nanofibers (C5), C10, 5 wt% geraniol-loaded PLA nanofibers (G5), and 10 wt% geraniol-loaded PLA nanofibers (G10) against E. coli and S.epidermidis, growth kinetic curves were analyzed using OD600. For the results, we found that the antibacterial performance was as follows: C10 > C5 > G10 > G5. Overall, carvacrol or geraniol-loaded PLA nanofibers are promising antibacterial materials for improving fiber functionality.

Electrical Generation and Deletion of Magnetic Skyrmion-Bubbles via Vertical Current Injection.

The magnetic skyrmion is a topologically protected spin texture that has attracted much attention as a promising information carrier because of its distinct features of suitability for high-density storage, low power consumption, and stability. One of the skyrmion devices proposed so far is the skyrmion racetrack memory, which is the skyrmion version of the domain-wall racetrack memory. For application in devices, skyrmion racetrack memory requires electrical generation, deletion, and displacement of isolated skyrmions. Despite the progress in experimental demonstrations of skyrmion generation, deletion, and displacement, these three operations have yet to be realized in one device. Here, a route for generating and deleting isolated skyrmion-bubbles through vertical current injection with an explanation of its microscopic origin is presented. By combining the proposed skyrmion-bubble generation/deletion method with the spin-orbit-torque-driven skyrmion shift, a proof-of-concept experimental demonstration of the skyrmion racetrack memory operation in a three-terminal device structure is provided.

Photocatalytic Activity and Filtration Performance of Hybrid TiO2-Cellulose Acetate Nanofibers for Air Filter Applications.

A facile method to prepare hybrid cellulose acetate nanofibers containing TiO2 (TiO2-CA nanofibers) by emulsion electrospinning technique was developed for the denitrification and filtration of particulate matters (PMs). This work found that hybrid TiO2-CA nanofibers mainly contain the anatase form of TiO2, contributing to the photodecomposition of NO gas under UV irradiation. The TiO2-CA nanofibers also showed an excellent filtration efficiency of 99.5% for PM0.5 and a photocatalytic efficiency of 78.6% for NO removal. Furthermore, the results implied that the morphology of the TiO2-CA nanofibers, such as micro-wrinkles and protrusions, increased the surface hydrophobicity up to 140°, with the increased addition of TiO2 nanoparticles. The proposed TiO2-CA nanofibers, as a result, would be promising materials for highly efficient and sustainable air filters for industrial and home appliance systems.

Reduced extrinsic recombination process in anatase and rutile TiO2 epitaxial thin films for efficient electron transport layers.

TiO2 is the most widely used material for the electron transport layers (ETLs) because it is characterized by proper band alignment with light absorbers, adequate optical transmittance, and high electron mobility. There are two thermodynamically stable crystal phases of TiO2: anatase and rutile. However, understanding which phase is more effective as the ETL is still required. In this paper, we demonstrate the different effects of using epitaxial anatase TiO2 and epitaxial rutile TiO2 (both grown using pulsed laser deposition) as the ETL material on the electrical and optical properties. Epitaxial Nb-doped TiO2 layers were used as the common electrode material for the both epitaxial ETLs for which the crystalline structural analysis revealed high crystalline qualities and good coherency for both phases. By analyzing the recombination kinetics, the anatase phase shows a preferable performance in comparison with the rutile phase, although both epitaxial phases show remarkably reduced extrinsic recombination properties, such as trap-assisted recombination. This study demonstrates not only a better electron transporting performance of anatase phase but also reduced extrinsic recombination through epitaxy growth.

Impact of Na Doping on the Carrier Transport Path in Polycrystalline Flexible Cu2ZnSn(S,Se)4 Solar Cells.

It is well-known that the alkali doping of polycrystalline Cu2ZnSn(S,Se)4 (CZTSSe) and Cu(In,Ga)(Se,S)2 has a beneficial influence on the device performance and there are various hypotheses about the principles of performance improvement. This work clearly explains the effect of Na doping on the fill factor (FF) rather than on all of the solar cell parameters (open-circuit voltage, FF, and sometimes short circuit current) for overall performance improvement. When doping is optimized, the fabricated device shows sufficient built-in potential and selects a better carrier transport path by the high potential difference between the intragrains and the grain boundaries. On the other hand, when doping is excessive, the device shows low contact potential difference and FF and selects a worse carrier transport path even though the built-in potential becomes stronger. The fabricated CZTSSe solar cell on a flexible metal foil optimized with a 25 nm thick NaF doping layer achieves an FF of 62.63%, thereby clearly showing the enhancing effect of Na doping.

Round Acupuncture for the Treatment of Recurrent Carpal Tunnel Syndrome.

OBJECTIVES: Round Acupuncture having blunt end has developed from acupotomy. This case report is to find out that Round Acupuncture is effective in treating patients with recurrent carpal tunnel syndrome (CTS), which has not improved by steroid injection or acupotomy. METHODS: Round Acupuncture was inserted into the distal fibers of transverse carpal ligament and released toward the proximal fibers. Treatment was performed three times in total. T ingling, numbn ess, night pain and swelling sensation were assessed, and provocative maneuvers were also used. RESULTS: After treat ment, all symptoms completely disappeared and the patient had no recurrence until 3 months after treatment. CONCLUSION: Round Acupuncture co uld be an effective treatment for recurrent CTS.

Sodium-assisted passivation of grain boundaries and defects in Cu2ZnSnSe4 thin films.

The long stagnation of the photo-conversion efficiency of kesterites below 13% is a source of frustration in the scientific community. In this study, we investigated the effects of sodium on the passivation of grain boundaries and defects in Cu2ZnSnSe4 (CZTSe) grown on a soda-lime glass (SLG) and borosilicate (BS) glass. Because BS glass does not inherently contain sodium, we placed a thin layer of NaF between CZTSe and Mo. The composition of the samples is Cu-poor and Zn-rich. The distribution of sodium and its contributions to phase formation and defects were examined by cross-sectional energy-dispersive X-ray profiling, Raman scattering spectroscopy and imaging, surface potential and photoluminescence. From the experimental results, it can be strongly claimed that sodium ions segregate predominantly near the grain boundaries and reduce CuZn-related defects. These local surface imaging analyses provided the exact locations of the secondary phases. In particular, the photo-assisted scanning probe method enabled us to observe the changes in the optoelectrical properties of the thin films and the carrier behavior within the materials. Further studies with distinct alkali ions and optimal processing conditions will pave a way to improve the performance of kesterite solar cells.

Enhanced carrier transport over grain boundaries in lead-free CH3NH3Sn(I1-x Br x )3 (0 ≤ x ≤ 1) perovskite solar cells.

This paper reports on grain boundary (GB) roles in lead-free tin halide perovskite thin films. Nano scale spatial mapping of charge separation efficiency in methylammonium tin halide (MASn(I1-x Br x )3, MA = CH3NH3) thin films were constructed by Kelvin probe force microscopy and conductive atomic force microscopy (C-AFM). We observed downward band bending at GBs under dark conditions and higher surface photovoltage along the GBs, confirmed by C-AFM which showed high local current flows along the GBs. The band bending degree and local current intensity were affected by the Br/I ratio. Photo-generated carriers were more effectively separated and collected at GBs with increased Br content, and hysteresis was observed in Br-rich Sn-halide perovskite.

Efficacy and safety of combined treatment of miniscalpel acupuncture and non-steroidal anti-inflammatory drugs: an assessor-blinded randomized controlled pilot study.

BACKGROUND: Chronic neck pain is a common musculoskeletal disease during the lifespan of an individual. With an increase in dependence on computer technology, the prevalence of chronic neck pain is expected to rise and this can lead to socioeconomic problems. We have designed the current pilot study to evaluate the efficacy and safety of miniscalpel acupuncture treatment combined with non-steroidal anti-inflammatory drugs (NSAIDs) in patients with chronic neck pain. METHODS: This seven-week clinical trial has been designed as an assessor-blinded, randomized controlled trial with three parallel arms. Thirty-six patients will be recruited and randomly allocated to three treatment groups: miniscalpel acupuncture treatment; NSAIDs; and miniscalpel acupuncture treatment combined with NSAIDs. Patients in the miniscalpel acupuncture and combined treatment groups will receive three sessions of miniscalpel acupuncture over a three-week period. Patients in the NSAIDs and combined treatment groups will receive zaltoprofen (one oral tablet, three times a day for three weeks). Primary and secondary outcomes will be measured at weeks 0 (baseline), 1, 2, 3 (primary end point), and 7 (four weeks after treatment completion) using the visual analogue scale and the Neck Disability Index, EuroQol 5-dimension questionnaire, and Patients' Global Impression of Change scale, respectively. Adverse events will also be recorded. DISCUSSION: This pilot study will provide a basic foundation for a future large-scale trial as well as information about the feasibility of miniscalpel acupuncture treatment combined with NSAIDs for chronic neck pain. TRIAL REGISTRATION: Korean Clinical Research Information Service registry, KCT0002258 . Registered on 9 March 2017.

Gene expression analysis of the pro-oestrous-stage rat uterus reveals neuroligin 2 as a novel steroid-regulated gene.

In the present study, differential gene expression in the uteri of ovariectomised (OVX) and pro-oestrous rats (OVX v. pro-oestrus pair) was investigated using cDNA expression array analysis. Differential uterine gene expression in OVX rats and progesterone (P(4))-injected OVX rats (OVX v. OVX + P(4) pair) was also examined. The uterine gene expression profiles of these two sets of animals were also compared for the effects of P(4) treatment. RNA samples were extracted from uterine tissues and reverse transcribed in the presence of [alpha(32)P]-dATP. Membrane sets of rat arrays were hybridised with cDNA probe sets. Northern blot analysis was used to validate the relative gene expression patterns obtained from the cDNA array. Of the 1176 cDNAs examined, 23 genes showed significant (>two-fold) changes in expression in the OVX v. pro-oestrus pair. Twenty of these genes were upregulated during pro-oestrus compared with their expression in the OVX rat uterus. In the OVX v. OVX + P(4) pair, 22 genes showed significant (>two-fold) changes in gene expression. Twenty of these genes were upregulated in the OVX + P(4) animals. The genes for nuclear factor I-XI, afadin, neuroligin 2, semaphorin Z, calpain 4, cyclase-associated protein homologue, thymosin beta-4X and p8 were significantly upregulated in the uteri of the pro-oestrus and OVX + P(4) rats of both experimental pairs compared with the OVX rat uteri. These genes appear to be under the control of P(4). One of the most interesting findings of the present study is the unexpected and marked expression of the neuroligin 2 gene in the rat uterus. This gene is expressed at high levels in the central nervous system and acts as a nerve cell adhesion factor. According to Northern blot analysis, neuroligin 2 gene expression was higher during the pro-oestrus and metoestrus stages than during the oestrus and dioestrus stages of the oestrous cycle. In addition, neuroligin 2 mRNA levels were increased by both 17beta-oestradiol (E(2)) and P(4), although P(4) administration upregulated gene expression to a greater extent than injection of E(2). These results indicate that neuroligin 2 gene expression in the rat uterus is under the control of both E(2) and P(4), which are secreted periodically during the oestrous cycle.