Protective Topical Dual-Sided Nanofibrous Hemostatic Dressing Using Mussel and Silk Proteins with Multifunctionality of Hemostasis and Anti-Bacterial Infiltration.

Topical hemostatic agents are preferred for application to sensitive bleeding sites because of their immediate locoregional effects with less tissue damage. However, the majority of commercial hemostatic agents fail to provide stable tissue adhesion to bleeding wounds or act as physical barriers against contaminants. Hence, it has become necessary to investigate biologically favorable materials that can be applied and left within the body post-surgery. In this study, a dual-sided nanofibrous dressing for topical hemostasis is electrospun using a combination of two protein materials: bioengineered mussel adhesive protein (MAP) and silk fibroin (SF). The wound-adhesive inner layer is fabricated using dihydroxyphenylalanine (DOPA)-containing MAP, which promotes blood clotting by aggregation of hemocytes and activation of platelets. The anti-adhesive outer layer is composed of alcohol-treated hydrophobic SF, which has excellent spinnability and mechanical strength for fabrication. Because both proteins are fully biodegradable in vivo and biocompatible, the dressing would be suitable to be left in the body. Through in vivo evaluation using a rat liver damage model, significantly reduced clotting time and blood loss are confirmed, successfully demonstrating that the proposed dual-sided nanofibrous dressing has the right properties and characteristics as a topical hemostatic agent having dual functionality of hemostasis and physical protection.

Bone Regeneration with 3D-Printed Hybrid Bone Scaffolds in a Canine Radial Bone Defect Model.

BACKGROUND: The repair of large bone defects remains a significant challenge in clinical practice and requires bone grafts or substitute materials. In this study, we developed a unique hybrid bone scaffold comprising a three dimensional (3D)-printed metal plate for weight bearing and a biodegradable polymer tube serving as bone conduit. We assessed the long-term effect of the hybrid bone scaffold in repairing radial bone defects in a beagle model. METHODS: Bone defects were created surgically on the radial bone of three beagle dogs and individually-tailored scaffolds were used for reconstruction with or without injection of autologous bone and decellularized extracellular matrix (dECM). The repaired tissue was evaluated by X-ray, micro-computed tomography, and histological observation 6 months after surgery. The functional integrity of hybrid bone scaffold-mediated reconstructions was assessed by gait analysis. RESULTS: In vivo analysis showed that the hybrid bone scaffolds maintained the physical space and bone conductivity around the defect. New bone was formed adjacent to the scaffolds. Addition of autologous bone and dECM in the polymer tube improved healing by enhancing bone induction and osteoconduction. Furthermore, the beagles' gait appeared normal by 4 months. CONCLUSION: The future of bone healing and regeneration is closely related to advances in tissue engineering. Bone production using autologous bone and dECM loaded on 3D-printed hybrid bone scaffolds can successfully induce osteogenesis and provide mechanical force for functional bone regeneration, even in large bone defects.

Mechanical and Biocompatibility Properties of Sintered Titanium Powder for Mimetic 3D-Printed Bone Scaffolds.

A composite comprising Ti and NaCl powders was sintered similar to a three-dimensional (3D)-printed patient-customized artificial bone scaffold. Additionally, a proper microstructure of the mimetic scaffold and the optimum processing parameters for its development were analyzed. The mechanical properties of the metal-based porous-structured framework used as an artificial bone scaffold were an optimum replacement for the human bone. Thus, it was confirmed that patient-customized scaffolds could be manufactured via 3D printing. The 3D-printed mimetic specimens were fabricated by a powder-sintering method using Ti for the metal parts, NaCl as the pore former, and polylactic acid as the biodegradable binder. Scanning electron microscopy (SEM) images showed that pores were formed homogeneously, while X-ray computed tomography confirmed that open pores were generated. The porosity and pore size distribution were measured using a mercury porosimeter, while the flexural strength and flexural elastic modulus were calculated using the three-point bending test. Based on these measurements, a pore-former content of 15 vol % optimized the density and flexural strength to 2.52 g cm-2 and 283 MPa, respectively, similar to those of the actual iliac bone. According to the 3D-printing production method, a selective laser-sintering process was applied for the fabrication of the mimetic specimen, and it was determined that the microstructure and properties similar to those of previous metal specimens could be achieved in the as-prepared specimen. Additionally, a decellularized extracellular matrix (dECM) was used to coat the surfaces and interiors of the specimens for evaluating their biocompatibilities. SEM image analysis indicated that the adipose-derived stem cells grew evenly inside the pores of the coated specimens, as compared with the bulky Ti specimens without the dECM coating. The doubling time at 65% was measured at 72, 75, and 83 h for specimens with pore-former contents of 5, 10, and 15 vol %, respectively. The doubling time without the pore former was 116 h. As compared with the specimens without the pore former (73 h), 15% of the dECM-coated specimens showed a doubling time of 64%, measured at 47 h.

A Novel Hypothesis and Characterization to Isolate Microvascular Endothelial Cells Simultaneously with Adipose-Derived Stem Cells from the Human Adipose-Derived Stromal Vascular Fraction.

BACKGROUND: Angiogenesis and vasculogenesis are essential processes for successful tissue regeneration in tissue engineering and regenerative medicine. The adipose-derived stromal vascular fraction (SVF) is not only a source of adipose stem cells (ASC) but also a suitable source of microvascular endothelial cells because it is a rich capillary network. So, we propose a new hypothesis for isolating adipose-derived human microvascular endothelial cells (HMVEC-A) from the SVF and developed a dual isolation system that isolates two cell types from one tissue. METHOD: To isolate HMVEC-A, we analyzed the supernatant discarded when ASC is isolated from the adipose-derived SVF. Based on this analysis, we assumed that the SVF adherent to the bottom of the culture plate was divided into two fractions: the stromal fraction as the ASC-rich fraction, and the vascular fraction (VF) as the endothelial cells-rich fraction floating in the culture supernatant. VF isolation was optimized and the efficiency was compared, and the endothelial cells characteristics of HMVEC-A were confirmed by flow cytometric analysis, immunocytochemistry (ICC), a DiI-acetylated low-density lipoprotein (DiI-Ac-LDL) uptake, and in vitro tube formation assay. RESULTS: Consistent with the hypothesis, we found a large population of HMVEC-A in the VF and isolated these HMVEC-A by our isolation method. Additionally, this method had higher yields and shorter doubling times than other endothelial cells isolation methods and showed typical morphological and phenotypic characteristics of endothelial cells. CONCLUSION: Cells obtained by the method according to our hypothesis can be applied as a useful source for studies such as tissue-to-tissue networks, angiogenesis and tissue regeneration, patient-specific cell therapy, and organoid chips.

Verapamil-containing silicone gel reduces scar hypertrophy.

A hypertrophic scar is a common dermal fibroproliferative lesion usually treated with topical silicone. Verapamil, a type of calcium channel blocker, is considered a candidate drug for the treatment of hypertrophic scars. Here, we report that the addition of verapamil to topical silicone gel enhances treatment outcomes of hypertrophic scars. Upon creation of hypertrophic scars with the rabbit ear model, varying concentrations of verapamil-added silicone gel (0.1, 1, and 10 mg/g) were applied daily for 28 days. After the animals were euthanised, microscopic measurement was performed for (a) scar elevation index (SEI), (b) fibroblast count, and (c) capillary count. On gross analysis, features of hypertrophic scars were significantly alleviated in the verapamil-added groups. On histologic examination, verapamil-added groups showed (a) reduced SEI (1.93 (1.79-2.67) for control vs 1.34 (1.21-1.51) for silicone only and 1.13 (1.01-1.65) for verapamil-added silicone), (b) fibroblast count 700.5 (599.5-838.5) for control, 613.25 (461-762.5) for silicone only, and 347.33 (182.5-527) for verapamil-added silicone), and (c) capillary formation (52 (35.5-96.5) for control, 46 (28-64.5) for silicone only, and 39.83(24-70) for verapamil-added silicone) (Kruskal-Wallis test, P < .05). On western blot, expression levels of collagen I protein was lower in the 1 mg/g and 10 mg/g verapamil-added silicone compared with control. Therefore, we suggest a therapeutic concentration of verapamil-added silicone gel of at least over 1 mg/g. Further study regarding maximally effective concentration and deeper insight into the mechanism of action should follow.

Nitric Oxide Produced by the Antioxidant Activity of Verapamil Improves the Acute Wound Healing Process.

BACKGROUND: Verapamil is used in the treatment of hypertension, angina pectoris, cardiac arrhythmia, hypertrophic scars, and keloids to block transmembrane calcium ion flux. Verapamil has antioxidant activity, which enhances the production of nitric oxide (NO). NO promotes the proliferation of fibroblasts, keratinocytes, endothelial cells, and epithelial cells during wound healing. In this study, we investigated the effect of verapamil and its antioxidant properties on the enhancement of acute wound healing via NO. METHODS: A full-thickness wound healing model was created on the rat dorsal with a silicone ring. The wound closure rate was estimated every 2 days for 14 days. A histological study was performed to evaluate wound healing. Immunofluorescence staining was analyzed for angiogenesis. The expressions of collagen type I (COL I), collagen type III (COL III), and vascular endothelial growth factor (VEGF) were assessed by Western blot. Real-time polymerase chain reaction (qRT-PCR) was performed to examine the expression of endothelial NO synthase and inducible NO synthase, which are related to antioxidant activity in the process of wound healing. RESULTS: The wound closure rate was faster in the verapamil group compared to the control and silicone groups. Histologic analysis revealed capillaries and stratum basale in the verapamil group. Immunofluorescence staining was shown vessel formation in the verapamil group. Western blot and qRT-PCR analysis revealed high expression levels of COL I, VEGF, eNOS, and FGF in the verapamil. CONCLUSION: Verapamil's antioxidant activity enhances NO production in acute wound healing. We suggest that verapamil can be used to promote acute wound healing.

Clinical Efficacy and Safety of Injection of Stromal Vascular Fraction Derived from Autologous Adipose Tissues in Systemic Sclerosis Patients with Hand Disability: A Proof-Of-Concept Trial.

BACKGROUND: Stromal vascular fraction (SVF) has recently emerged as a potential therapeutic modality, due to its multipotent cellular components in tissue regeneration. Systemic sclerosis (SSc) is a progressive autoimmune disease that results in hand disability by skin fibrosis and microangiopathies. We performed an open-label study to investigate the efficacy and safety of SVF injection in SSc patients (Clinical Trial number: NCT03060551). METHODS: We gathered 20 SSc patients with hand disability, planning for a 24-week follow-up period. SVF was extracted from autologous adipose tissues, processed by the closed system kit, and injected into each finger of SSc patients. We observed various efficacy and safety profiles at each follow-up visit. RESULTS: Among the 20 initially enrolled patients, eighteen received SVF injection, and were completely followed-up for the whole study period. Patients received 3.61 × 106 mesenchymal stem cells into each finger on average. Skin fibrosis, hand edema, and quality of life were significantly improved, and 31.6% of active ulcers were healed at 24 weeks after injections. Semiquantitative results of nailfold capillary microscopy were ameliorated. There was no single serious adverse event related to the procedure. CONCLUSIONS: Injection of SVF derived from autologous adipose tissues is tolerable, and shows clinical efficacy in SSc patients.

Cryopreservation of lipoaspirates: in vitro measurement of the viability of adipose-derived stem cell and lipid peroxidation.

As the storage time of the fat tissue passes by, lipid peroxidation and creation of by-products may take place. The objective of this study was to evaluate the cell viability and functional changes of adipose-derived stem cells (ADSCs) in the cryopreserved lipoaspirates at different temperatures in accordance with lipid peroxidation. Lipoaspirates acquired from liposuction were divided into four different temperature groups and stored at 4°C, -20°C, -80°C, and -196°C. After isolating ADSC from each sample, gross cell morphology and cell viability were compared with doubling time and colony-forming unit (CFU) formation ability. Acid value, that is, thiobarbituric acid value was measured to assess lipid peroxidation. No viable ADSC was observed in -20°C and -196°C samples for past 1 week and a superior number of the live cells were detected in the 4°C group compared with the -80°C group. However, the persistence of cell division and CFU formation after 1 week was only observed in adipocytes stored at -80°C. Lipid peroxidation mainly occurred at 4°C and -20°C storage samples. If the lipoaspirates were planned to be cryopreserved, it is advised to store at -80°C. However, the number of actually functional ADSCs is very low. Furthermore, even in the cryopreserved status, continuous lipid peroxidation and by-product creation took place, suggesting shorter preservation period as possible in the clinics.

Optimal Condition of Isolation from an Adipose Tissue-Derived Stromal Vascular Fraction for the Development of Automated Systems.

BACKGROUND: The stromal vascular fraction (SVF) isolated from adipose tissue, which contains stem cells as well as other cell types, has been applied in various research fields. Although different enzymatic concentrations and treatment durations have been applied to isolate the SVF, optimal conditions have not been established. Thus, we aimed to establish the optimal conditions for isolation of the SVF from adipose tissue by automated systems. METHODS: The SVF was collected from removed adipose tissues of five donors during surgery. The SVF was treated with 0.1% or 0.2% collagenase type I for 20, 40, or 60 min. Then, colony forming unit (CFU) assays and flow cytometry were performed to characterize the adipose stem cells (ASCs). A cytokine array was used to investigate the correlation between colony-formation ability and the secretion of isolated ASCs. RESULTS: Treatment with 0.1% collagenase type I for 60 min resulted in a higher SVF yield, whereas treatment with 0.1% collagenase for 40 min resulted in higher CFU values. In addition, expression of interleukin (IL)-6, IL-8, and monocyte chemoattractant protein-1 in the SVF was higher in the high-CFU group than in the low-CFU group. CONCLUSION: The optimal conditions for isolation of the SVF from adipose tissue were treatment with 0.1% collagenase type I for 40 min. We identified the conditions required for efficient SVF isolation based on high CFU values, and our results will facilitate the development of automated systems.

Bone Morphogenetic Protein 2-Conjugated Silica Particles Enhanced Early Osteogenic Differentiation of Adipose Stem Cells on the Polycaprolactone Scaffold.

Background: Silica particles (SPs) induce cell proliferation and osteogenic differentiation. We reported that SPs in the scaffold induced early stage osteogenic differentiation. Methods: A polycaprolactone (PCL) scaffold was fabricated with a 10 wt% SPs. The surface of PCL scaffold was coated with a 10 µg/mL collagen solution. Next, the scaffold was conjugated with 2 µM SPs, 2 µg/mL bone morphogenetic protein 2 (BMP2), or 2 µM BMP2-conjugated SPs (BCSPs). Green fluorescent protein-coupled BMP2 was applied to fabricate the scaffold. The fluorescence intensity was analyzed by confocal microscopy. The mRNA levels of the early osteogenic differentiation marker, alkaline phosphatase (ALP), were analyzed by real-time quantitative polymerase chain reaction. Levels of BMP2, RUNX2, ERK1/2, and AKT were assessed by western blotting. Results: ALP mRNA levels were significantly higher in the BCSP-conjugated scaffold than in the other scaffolds. In the early stage of osteogenic differentiation, the protein levels of BMP2, RUNX2, ERK1/2, and AKT in cells were significantly higher in the BCSP-conjugated scaffold than in other scaffolds. Thus, the BCSP composite scaffold induced rapid osteogenic differentiation. Conclusion: These results suggest that BCSP composite can be used to promote early stage osteogenic differentiation and show promise as a material for use in scaffolds for bone regeneration.

Adipose Stem Cells with Conditioned Media for Treatment of Acne Vulgaris Scar.

This study was to investigate the effect of subcutaneous injection of the adipose stem cells (ASCs) with conditioned media (CM) in the treatment of acne vulgaris scar. We used Adult male New Zealand white rabbit ears as an animal model and induced acne formation by Kignman method. Adipose tissue was isolated and harvested from the scapula of rabbits, and ASCs were cultured and expanded until passage 1. There have four groups in our experiment, include phosphate buffered saline (PBS), ASCs with PBS (ASC + PBS), CM, and ASCs with CM (ASC + CM) group. This solution of 0.6 ml injected to subcutaneous in each group. ASC + PBS and ASC + CM groups were containing ASCs of 5.0 × 106 cells/ml. We analyzed the treatment of 4 groups to scar tissue after 2 and 4 weeks by hematoxylin and eosin stain, immunohistochemistry, and RNA expression level of tumor necrosis factor-α (TNF-α), interleukin-1α (IL-1α), and matrix metalloproteinase-2 (MMP-2). Also, the expression of keratin 16 (K16) was detected by western blot analysis. H&E stain showed that infiltration of inflammation cells was significantly reduced at 2 and 4 weeks, as well as re-epithelialization was improved in the ASC + CM group. The ASC + CM gourp was reduced both expression levels of TNF-α, IL-1α, and MMP-2 and K16 protein level. In conclusion, the ASCs with CM has a significant curative effect on acne vulgaris scar, more to the point, the CM has a key role on treatment. It could be applied to a therapeutic approach to regenerate to treat acne vulgaris scar.

Epidermal Growth Factor (EGF)-Like Repeats and Discoidin I-Like Domains 3 (EDIL3): A Potential New Therapeutic Tool for the Treatment of Keloid Scars.

In keloids, the mechanism underlying the excessive accumulation of extracellular matrix after injury of the skin is unclear, and there is no effective treatment because of the incomplete understanding of their pathogenesis; thus, a high recurrence rate is observed. We studied a new marker of keloids to determine a new treatment strategy. First, the keloid gene expression profile (GSE44270) was analyzed (downloaded from the Gene Expression Omnibus database) and the new keloid marker candidate, epidermal growth factor (EGF)-like repeats and discoidin I-like domains 3 (EDIL3) which were upregulated in keloid samples was identified. Knockdown of EDIL3 is known to suppresses angiogenesis by downregulating relevant inhibitory factors that can limit the supply of survival factors to tumor cells from the circulation via the vascular endothelial cells. In keloids, the mechanism of action of EDIL3 may be similar to that in tumors; the inhibition of apoptosis in tumor cells via a reduction in the apoptosis of blood vessels by upregulating an angiogenic factor. To determine whether EDIL3 is involved in keloid formation, we performed knockdown of EDIL3 in keloid fibroblasts in vitro by transfection with anti-EDIL3 small interfering RNA (via microporation). EDIL3 was upregulated in keloid fibroblasts compared with normal fibroblasts in collagen type I, II and III. Our results indicate the control of EDIL3 expression may be a new promising treatment of keloid disease also the molecular targeting of EDIL3 may improve the quality of treatment and reduce the formation of keloids.

Characterization of adipose tissue mesenchymal stromal cell subsets with distinct plastic adherence.

Mesenchymal stromal cells (MSCs) established by in-vitro adherence culture have been widely utilized for various cell therapeutic trials, but potential heterogeneity that can be caused by preparation methods are poorly characterized. In this study, we show that at least two distinct subsets of MSCs with different adherence to plastic surface exist in human adipose tissue-derived stromal vascular fraction (SVF); while 69% of total colony forming units in SVF adhere to the surface before 3 hrs of plating, 13-17% of colonogenic cells adhered to the surface at later period of 15 hr to 1 week after plating. Of note, the late adherent MSCs exhibited higher self-renewal of colony forming cells and higher proliferating potential with comparable level of osteogenic or adipogenic differentiation potential to the early adherence subsets. Moreover, late adherent cells exhibited distinct pattern of paracrine secretome including higher level secretion of cytokines than the early adherent subsets. Taken together, these results suggest the possibility that distinct adherence properties of MSCs can be another parameter of clonal heterogeneity in the subpopulations of adipose tissue MSCs and that it can be an important factor for optimization of MSC preparation for cell therapeutic trials.

Silica nanoparticles increase human adipose tissue-derived stem cell proliferation through ERK1/2 activation.

BACKGROUND: Silicon dioxide composites have been found to enhance the mechanical properties of scaffolds and to support growth of human adipose tissue-derived stem cells (hADSCs) both in vitro and in vivo. Silica (silicon dioxide alone) exists as differently sized particles when suspended in culture medium, but it is not clear whether particle size influences the beneficial effect of silicon dioxide on hADSCs. In this study, we examined the effect of different sized particles on growth and mitogen-activated protein kinase signaling in hADSCs. METHODS: Silica gel was prepared by a chemical reaction using hydrochloric acid and sodium silicate, washed, sterilized, and suspended in serum-free culture medium for 48 hours, and then sequentially filtered through a 0.22 µm filter (filtrate containing nanoparticles smaller than 220 nm; silica NPs). hADSCs were incubated with silica NPs or 3 µm silica microparticles (MPs), examined by transmission electron microscopy, and assayed for cell proliferation, apoptosis, and mitogen-activated protein kinase signaling. RESULTS: Eighty-nine percent of the silica NPs were around 50-120 nm in size. When hADSCs were treated with the study particles, silica NPs were observed in endocytosed vacuoles in the cytosol of hADSCs, but silica MPs showed no cell entry. Silica NPs increased the proliferation of hADSCs, but silica MPs had no significant effect in this regard. Instead, silica MPs induced slight apoptosis. Silica NPs increased phosphorylation of extracellular signal-related kinase (ERK)1/2, while silica MPs increased phosphorylation of p38. Silica NPs had no effect on phosphorylation of Janus kinase or p38. Pretreatment with PD98059, a MEK inhibitor, prevented the ERK1/2 phosphorylation and proliferation induced by silica NPs. CONCLUSION: Scaffolds containing silicon dioxide for tissue engineering may enhance cell growth through ERK1/2 activation only when NPs around 50-120 nm in size are included, and single component silica-derived NPs could be useful for bioscaffolds in stem cell therapy.

Secretory factors of human chorion-derived stem cells enhance activation of human fibroblasts.

BACKGROUND AIMS: Wound healing remains a principal challenge in modern medical science. Chorion-dervied stem cells (CDSCs), isolated from human placenta, have largely been overlooked, and few studies on their potential in wound healing have been conducted. In this study, we investigated the functional characteristics of CDSCs compared with adipose-derived stem cells (ASCs) on human fibroblasts (HFs). METHODS: We analyzed CDSCs by means of flow cytometry to confirm their mesenchymal stromal cell characteristics. We then evaluated the paracrine effects of CDSCs on HFs in a co-culture system and focused on fibroblast proliferation, migration and collagen synthesis. To explore the potential of CDSCs in wound healing, CDSC- and ASC-secreted factors were compared by use of a cytokine antibody array. RESULTS: CDSCs had morphology similar to MSCs and expressed a mesenchymal stromal cell phenotype. HF proliferation and migration increased more than 5-fold when co-cultured with CDSCs. Furthermore, Western blot and reverse transcription-polymerase chain reaction analysis showed that expression of collagen (types I and III) in fibroblasts was upregulated 2-fold when co-cultured with CDSCs. Cytokine array results of CDSC-conditioned medium and ASC-conditioned medium revealed the presence of growth factors known to influence wound healing, including interleukin -6, interleukin -8, monocyte chemotactic protein 1 and regulated on activation, normal T cells expressed and secreted. CONCLUSIONS: Our data demonstrated that CDSCs are functionally similar to ASCs, promote HF activation, and secrete growth factors that influence wound healing. Therefore, we suggest that CDSCs are potentially applicable in wound healing.

The stem cell potential and multipotency of human adipose tissue-derived stem cells vary by cell donor and are different from those of other types of stem cells.

Human adipose tissue-derived mesenchymal stem cells (AT-MSCs) from various sites are applied in tissue engineering and cell therapy. The condition of AT-MSCs depends on the donor's age, body mass index (BMI), and gender. AT-MSCs from 66 human donors were analyzed, and the cells were sorted according to donor age (10-19 years: n = 1; 20-29 years: n = 5; 30-39 years: n = 12; 40-49 years: n = 22; 50-59 years: n = 12; 60-69 years: n = 9, and 70 years or older: n = 5), BMI (under 25, 25-30, and over 30), and gender (19 males and 48 females). Additionally, AT-MSCs were compared to bone marrow MSCs and chorionic tissue-derived MSCs. We measured the MSC yield, growth rate, colony-forming units, multipotency, and surface antigens. AT-MSC proliferation was greater in cells isolated from individuals aged less than 30 years compared to the proliferation of AT-MSCs from those over 50 years old. BMI was correlated with osteogenic differentiation potency; increased BMI enhanced osteogenesis. Adipogenic differentiation was more strongly induced in cells isolated from donors aged less than 30 years compared to those isolated from other age groups. Also, a BMI above 30 was associated with enhanced adipogenic differentiation compared to cells isolated from individuals with a BMI below 25. Bone marrow MSCs were strongly induced to differentiate along both osteogenic and adipogenic lineages, whereas AT-MSCs predominantly differentiated into the chondrogenic lineage. Therefore, the type of regeneration required and variations among potential donors must be carefully considered when selecting MSCs for use in applied tissue engineering or cell therapy.

Development of a bone reconstruction technique using a solid free-form fabrication (SFF)-based drug releasing scaffold and adipose-derived stem cells.

For tissue regeneration, three essential components of scaffolds, signals (biomolecules), and cells are required. Moreover, because bony defects are three-dimensional in many clinical circumstances, an exact 3D scaffold is important. Therefore, we proposed an effective reconstruction tool for cranial defects using human adipose-derived stem cells (hADSCs) and a 3D functional scaffold fabricated by solid free-form fabrication (SFF) technology that secretes biomolecules. We fabricated poly(propylene fumarate)-based 3D scaffolds with embedded microsphere-deliverable bone morphogenetic protein-2 (BMP-2) by microstereolithography. BMP-2-loaded SFF scaffolds with/without hADSCs (SFF/BMP/hADSCs scaffolds and SFF/BMP scaffolds, respectively) and BMP-2-unloaded SFF scaffolds (SFF scaffolds) were then implanted in rat crania, and in vivo bone formation was observed. Analyses of bone formation areas using micro-computed tomography (micro-CT) showed the superiority of SFF/BMP/hADSCs scaffolds. Hematoxylin and eosin stain, Masson's trichrome stain, and collagen type-I stain supported the results of the micro-CT scan. And human leukocyte antigen-ABC showed that seeded, differentiated hADSCs were well grown and changed to the bone tissue at the inside of the scaffold. Results showed that our combination of a functional 3D scaffold and hADSCs may be a useful tool for improving the reconstruction quality of severe bony defects in which thick bone is required.

Enhancement of bone regeneration through facile surface functionalization of solid freeform fabrication-based three-dimensional scaffolds using mussel adhesive proteins.

Solid freeform fabrication (SFF) is recognized as a promising tool for creating tissue engineering scaffolds due to advantages such as superior interconnectivity and highly porous structure. Despite structural support for SFF-based three-dimensional (3-D) scaffolds that can lead to tissue regeneration, lack of cell recognition motifs and/or biochemical factors has been considered a limitation. Previously, recombinant mussel adhesive proteins (MAPs) were successfully demonstrated to be functional cell adhesion materials on various surfaces due to their peculiar adhesive properties. Herein, MAPs were applied as surface functionalization materials to SFF-based 3-D polycaprolactone/poly(lactic-co-glycolic acid) scaffolds. We successfully coated MAPs onto scaffold surfaces by simply dipping the scaffolds into the MAP solution, which was confirmed through X-ray photoelectron spectroscopy and scanning electron microscopy analyses. Through in vitro study using human adipose tissue-derived stem cells (hADSCs), significant enhancement of cellular activities such as attachment, proliferation, and osteogenic differentiation was observed on MAP-coated 3-D scaffolds, especially on which fused arginine-glycine-aspartic acid peptides were efficiently exposed. In addition, we found that in vivo hADSC implantation with MAP-coated scaffolds enhanced bone regeneration in a rat calvarial defect model. These results collectively demonstrate that facile surface functionalization of 3-D scaffolds using MAP would be a promising strategy for successful tissue engineering applications.

Systematic procedure for designing processes with multiple environmental objectives.

Evaluation of multiple objectives is very important in designing environmentally benign processes. It requires a systematic procedure for solving multiobjective decision-making problems due to the complex nature of the problems, the need for complex assessments, and the complicated analysis of multidimensional results. In this paper, a novel systematic procedure is presented for designing processes with multiple environmental objectives. This procedure has four steps: initialization, screening, evaluation, and visualization. The first two steps are used for systematic problem formulation based on mass and energy estimation and order of magnitude analysis. In the third step, an efficient parallel multiobjective steady-state genetic algorithm is applied to design environmentally benign and economically viable processes and to provide more accurate and uniform Pareto optimal solutions. In the last step a new visualization technique for illustrating multiple objectives and their design parameters on the same diagram is developed. Through these integrated steps the decision-maker can easily determine design alternatives with respect to his or her preferences. Most importantly, this technique is independent of the number of objectives and design parameters. As a case study, acetic acid recovery from aqueous waste mixtures is investigated by minimizing eight potential environmental impacts and maximizing total profit. After applying the systematic procedure, the most preferred design alternatives and their design parameters are easily identified.