Development of antioxidant packaging material by applying corn-zein to LLDPE film in combination with phenolic compounds.

UNLABELLED: Functional active packaging materials were successfully developed by incorporating antioxidant agents into corn-zein-laminated linear low-density polyethylene (LLDPE) film. The minimum effective concentrations of the active compounds (for example, thymol, carvacrol, eugenol) were determined and these compounds were then laminated into LLDPE films to develop corn-zein-laminated films with antioxidant agents. The release rate of antioxidant agents in gas and liquid media were determined along with the mechanical and water barrier properties of the films containing these compounds. Tensile strength and percentage elongation at break were reduced in the corn-zein-laminated LLDPE films when compared to typical LLDPE film. Furthermore, the ability of the corn-zein-laminated films to repel moisture decreased by approximately 12.2%, but was improved by incorporating hydrophobic antioxidant compounds in the corn-zein layer. Examination of release kinetics in the gas and liquid phases verified that antioxidants were effectively released from the films and inhibited oxidation during testing. Finally, the films were used for fresh ground beef packaging, and effectively inhibited lipid oxidation and had a positive effect on the color stability of beef patties during storage. These results indicate that the developed antioxidant films are a novel active packaging material that can be effectively implemented by the food industry to improve the quality and safety of foods. PRACTICAL APPLICATION: Zein protein, a by-product of corn processing industry, was laminated into plastic films in combination with natural phenolic compounds to develop antioxidant packaging films. The films demonstrated their efficient release patterns of antioxidant compounds, which are suitable for packaging applications and food protection.

Metabolomic assessment of fermentative capability of soybean starter treated with high pressure.

Meju, a brick of dried fermented soybean naturally inoculated with microorganisms, is a starter used for producing traditional Korean fermented soybean products such as soybean paste (doenjang) and soy sauce (ganjang). In order to reduce aging time during production of soybean paste and soy sauce, high pressure (HP) treatment was applied to the meju starter at 500 MPa of pressure for 10 min at 15 degrees C. Fermentative behaviors of normal and HP-treated meju were assessed and compared through physicochemical and (1)H NMR-based metabolomic analysis. All mejues were incubated for 3 weeks at 30 degrees C. At 1 week of incubation, total bacterial population decreased mainly due to a reduction of water content by spontaneous evaporation during the incubation period. As the incubation time increased, glutamate, proline, betain, choline, and phosphocholine levels increased in both normal and HP-treated mejues, indicating that microorganisms in the mejues synthesize these metabolites to endure intracellular hyperosmotic stress induced by the reduction in water content. Through 3 weeks of incubation, the amino-type nitrogen contents and neutral protease activities in HP-treated meju were significantly higher (p < 0.05) than in normal meju, even though total bacterial content in HP-treated meju was 2 or 3 times lower. Moreover, marked increases in glycerol, acetate, tyrosine, and choline levels were observed in HP-treated meju compared to normal meju. In particular, higher levels of tyrosine in HP-treated meju were consistent with the increased neutral protease activities compared to normal meju, indicating an improvement in enzyme stability with HP treatment. These findings highlight a new or better understanding of the influence of the HP or physical treatments on fermentative products in food processing, such as those associated with soybean paste and soy sauce, regarding metabolic behaviors in fermentative starter induced by HP treatment.

Metabolomic studies on geographical grapes and their wines using 1H NMR analysis coupled with multivariate statistics.

Environmental vineyard conditions can affect the chemical composition or metabolites of grapes and their wines. Grapes grown in three different regions of South Korea were collected and separated into pulp, skin, and seed. The grapes were also vinified after crushing. (1)H NMR spectroscopy with pattern recognition (PR) methods was used to investigate the metabolic differences in pulp, skin, seed, and wines from the different regions. Discriminatory compounds among the grapes were Na, Ca, K, malate, citrate, threonine, alanine, proline, and trigonelline according to PR methods of principal component analysis (PCA) or partial least-squares discriminant analysis (PLS-DA). Grapes grown in regions with high sun exposure and low rainfall showed higher levels of sugar, proline, Na, and Ca together with lower levels of malate, citrate, alanine, threonine, and trigonelline than those grown in regions with relatively low sun exposure and high rainfall. Environmental effects were also observed in the complementary wines. This study demonstrates that (1)H NMR-based metabolomics coupled with multivariate statistical data sets can be useful for determining grape and wine quality.

(1)H NMR-based metabolomic approach for understanding the fermentation behaviors of wine yeast strains.

(1)H NMR spectroscopy coupled with multivariate statistical analysis was used for the first time to investigate metabolic changes in musts during alcoholic fermentation and wines during aging. Three Saccharomyces cerevisiae yeast strains (RC-212, KIV-1116, and KUBY-501) were also evaluated for their impacts on the metabolic changes in must and wine. Pattern recognition (PR) methods, including PCA, PLS-DA, and OPLS-DA scores plots, showed clear differences for metabolites among musts or wines for each fermentation stage up to 6 months. Metabolites responsible for the differentiation were identified as valine, 2,3-butanediol (2,3-BD), pyruvate, succinate, proline, citrate, glycerol, malate, tartarate, glucose, N-methylnicotinic acid (NMNA), and polyphenol compounds. PCA scores plots showed continuous movements away from days 1 to 8 in all musts for all yeast strains, indicating continuous and active fermentation. During alcoholic fermentation, the highest levels of 2,3-BD, succinate, and glycerol were found in musts with the KIV-1116 strain, which showed the fastest fermentation or highest fermentative activity of the three strains, whereas the KUBY-501 strain showed the slowest fermentative activity. This study highlights the applicability of NMR-based metabolomics for monitoring wine fermentation and evaluating the fermentative characteristics of yeast strains.

1H nuclear magnetic resonance-based metabolomic characterization of wines by grape varieties and production areas.

(1)H NMR spectroscopy was used to investigate the metabolic differences in wines produced from different grape varieties and different regions. A significant separation among wines from Campbell Early, Cabernet Sauvignon, and Shiraz grapes was observed using principal component analysis (PCA) and partial least squares-discriminant analysis (PLS-DA). The metabolites contributing to the separation were assigned to be 2,3-butanediol, lactate, acetate, proline, succinate, malate, glycerol, tartarate, glucose, and phenolic compounds by PCA and PLS-DA loading plots. Wines produced from Cabernet Sauvignon grapes harvested in the continental areas of Australia, France, and California were also separated. PLS-DA loading plots revealed that the level of proline in Californian Cabernet Sauvignon wines was higher than that in Australian and French Cabernet Sauvignon, Australian Shiraz, and Korean Campbell Early wines, showing that the chemical composition of the grape berries varies with the variety and growing area. This study highlights the applicability of NMR-based metabolomics with multivariate statistical data sets in determining wine quality and product origin.

Tastes and structures of bitter peptide, asparagine-alanine-leucine-proline-glutamate, and its synthetic analogues.

Asn-Ala-Leu-Pro-Glu (NALPE) is a strong bitter peptide with a minimum response threshold (MRT) of 0.074 mM. To elucidate the relationship of spatial structure and bitterness on peptides, NALPE and its analogues, NALPW, NALPS, NALPL, NALPP, NALPD, and NALPR, were synthesized and sensorially evaluated. Structural analysis using computer simulation for each peptide revealed that the presence of a polar group and hydrophobic bitter amino acids, the composition of hydrophobic regions, the spatial orientation of the polar group and hydrophobic regions, and the proximity between polar groups and hydrophobic regions faced within the same plane space may be the major determinants for the taste type and intensity of peptide bitterness.

Immobilization of cryopreserved primary rat hepatocytes for the development of a bioartificial liver system.

Primary rat hepatocytes were cryopreserved in hormonally-defined medium (HDM) containing 40% (v/v) fetal bovine serum (FBS) and 10% (v/v) dimethyl sulfoxide (DMSO) in liquid N2 for 6 months. After thawing, the cells were immobilized using 2% (w/v) alginate and 0.5% (w/v) chitosan solutions. The capacities of ammonia removal and urea synthesis of the immobilized-thawed hepatocytes were similar to those of immobilized hepatocytes without cryopreservation. This result shows that immobilized hepatocytes after cryopreservation are useful for the development of a bioartificial liver system.