Symmetric Catalyst Design Employing Ir Nanoparticles on Black WO3- x Nanofiber Support for Boosting Water Electrolysis.

The efficient evolution of gaseous hydrogen and oxygen from water is required to realize sustainable energy conversion systems. To address the sluggish kinetics of the multielectron transfer reaction, bifunctional catalyst materials for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) should be developed. Herein, a tailored combination of atomically minimized iridium catalysts and highly conductive black WO3- x nanofiber supports are developed for the bifunctional electrolyzer system. Atomic Ir catalysts, particularly those that activate the OER, minimize the utilization of precious metals. The oxygen-deficient black WO3- x NF support, which boosts the HER, offers increased electronic conductivity and favorable nucleation sites for Ir loading. The Ir-black WO3- x NFs exhibit increased double-layer capacitance, a significantly reduced onset potential, lower Tafel slope, and stable cyclability for both the OER and HER, compared to large-sized Ir catalysts loaded on white WO3 nanofibers. This study offers a strategy for developing an optimal catalyst material with suitable supports for high-performance and economical water electrolysis systems for achieving carbon-negative targets.

Induction of Fatty Acid Oxidation Underlies DNA Damage-Induced Cell Death and Ameliorates Obesity-Driven Chemoresistance.

The DNA damage response is essential for preserving genome integrity and eliminating damaged cells. Although cellular metabolism plays a central role in cell fate decision between proliferation, survival, or death, the metabolic response to DNA damage remains largely obscure. Here, this work shows that DNA damage induces fatty acid oxidation (FAO), which is required for DNA damage-induced cell death. Mechanistically, FAO induction increases cellular acetyl-CoA levels and promotes N-alpha-acetylation of caspase-2, leading to cell death. Whereas chemotherapy increases FAO related genes through peroxisome proliferator-activated receptor α (PPARα), accelerated hypoxia-inducible factor-1α stabilization by tumor cells in obese mice impedes the upregulation of FAO, which contributes to its chemoresistance. Finally, this work finds that improving FAO by PPARα activation ameliorates obesity-driven chemoresistance and enhances the outcomes of chemotherapy in obese mice. These findings reveal the shift toward FAO induction is an important metabolic response to DNA damage and may provide effective therapeutic strategies for cancer patients with obesity.

Fabrication of Al-Ni Alloys for Fast Hydrogen Production from Hydrolysis in Alkaline Water.

Hydrogen generation through the hydrolysis of aluminum alloys has attracted significant attention because it generates hydrogen directly from alkaline water without the need for hydrogen storage technology. The hydrogen generation rate from the hydrolysis of aluminum in alkaline water is linearly proportional to its corrosion rate. To accelerate the corrosion rate of the aluminum alloy, we designed Al-Ni alloys by continuously precipitating an electrochemically noble Al3Ni phase along the grain boundaries. The Al-0.5~1 wt.% Ni alloys showed an excellent hydrogen generation rate of 16.6 mL/cm2·min, which is about 6.4 times faster than that of pure Al (2.58 mL/cm2·min). This excellent performance was achieved through the synergistic effects of galvanic and intergranular corrosion on the hydrolysis of Al. By raising the solution temperature to 50 °C, the optimal rate of hydrogen generation of Al-1 wt.% Ni in 10 wt.% NaOH solutions at 30 °C can be further increased to 54.5 mL/cm2·min.

Boosting oxygen evolution reaction activity with Mo incorporated NiFe-LDH electrocatalyst for efficient water electrolysis.

This work demonstrates a simple and scalable methodology for the binder-free direct growth of Mo-doped NiFe-layered double hydroxides on a nickel substrate via an electrodeposition route at room temperature. A three-dimensional (3D) nanosheet array morphology of the electrocatalyst provides immense electrochemical surface area as well as abundant catalytically active sites. Mo incorporation in the NiFe-LDH plays a crucial role in regulating the catalytic activity of oxygen evolution reaction (OER). The prepared electrocatalyst exhibited low overpotential (i.e., 230 mV) at 30 mA cm-2 for OER in an alkaline electrolyte (i.e., 1 M KOH). Furthermore, the optimized Mo-doped NiFe-LDH electrode was used as an anode in a laboratory-scale in situ single cell test system for alkaline water electrolysis at 80 °C with a continuous flow of 30 wt% KOH, and it shows the efficient electrochemical performance with a lower cell voltage of 1.80 V at a current density of 400 mA cm-2. In addition, an admirable long-term cell durability is also demonstrated by the cell for 24 h. This work encourages new designs and further development of electrode material for alkaline water electrolysis on a commercial scale.

YAP governs cellular adaptation to perturbation of glutamine metabolism by regulating ATF4-mediated stress response.

Proliferating cells have metabolic dependence on glutamine to fuel anabolic pathways and to refill the mitochondrial carbon pool. The Hippo pathway is essential for coordinating cell survival and growth with nutrient availability, but no molecular connection to glutamine deprivation has been reported. Here, we identify a non-canonical role of YAP, a key effector of the Hippo pathway, in cellular adaptation to perturbation of glutamine metabolism. Whereas YAP is inhibited by nutrient scarcity, enabling cells to restrain proliferation and to maintain energy homeostasis, glutamine shortage induces a rapid YAP dephosphorylation and activation. Upon glutaminolysis inhibition, an increased reactive oxygen species production inhibits LATS kinase via RhoA, leading to YAP dephosphorylation. Activated YAP promotes transcriptional induction of ATF4 to induce the expression of genes involved in amino acid homeostasis, including Sestrin2. We found that YAP-mediated Sestrin2 induction is crucial for cell viability during glutamine deprivation by suppressing mTORC1. Thus, a critical relationship between YAP, ATF4, and mTORC1 is uncovered by our findings. Finally, our data indicate that targeting the Hippo-YAP pathway in combination with glutaminolysis inhibition may provide potential therapeutic approaches to treat tumors.

Fatty acid oxidation facilitates DNA double-strand break repair by promoting PARP1 acetylation.

DNA repair is a tightly coordinated stress response to DNA damage, which is critical for preserving genome integrity. Accruing evidence suggests that metabolic pathways have been correlated with cellular response to DNA damage. Here, we show that fatty acid oxidation (FAO) is a crucial regulator of DNA double-strand break repair, particularly homologous recombination repair. Mechanistically, FAO contributes to DNA repair by activating poly(ADP-ribose) polymerase 1 (PARP1), an enzyme that detects DNA breaks and promotes DNA repair pathway. Upon DNA damage, FAO facilitates PARP1 acetylation by providing acetyl-CoA, which is required for proper PARP1 activity. Indeed, cells reconstituted with PARP1 acetylation mutants display impaired DNA repair and enhanced sensitivity to DNA damage. Consequently, FAO inhibition reduces PARP1 activity, leading to increased genomic instability and decreased cell viability upon DNA damage. Finally, our data indicate that FAO serves as an important participant of cellular response to DNA damage, supporting DNA repair and genome stability.

Fatty acid oxidation supports melanoma cell migration through autophagy regulation.

Metastasis is one of the most malignant characteristics of cancer cells, in which metabolic reprogramming is crucial for promoting and sustaining multi-steps of metastasis, including invasion, migration and infiltration. Recently, it has been shown that melanoma cells undergo a metabolic switching toward the upregulation of fatty acid oxidation (FAO) during metastasis. However, the underlying mechanisms by which FAO contributes to metastasis of melanoma cells remain obscure. Here, we report that FAO contributes to melanoma cell migration and invasion by regulating the formation of autophagosomes. Pharmacological or genetic inhibition of FAO impairs migration of melanoma cells, which seems not to be linked to energy production or redox homeostasis. Importantly, we reveal that acetyl-CoA production by FAO contributes to melanoma cell migration through autophagy regulation. Mechanistically, FAO inhibition results in increased autophagosome formation, which suppresses migration and invasion properties of melanoma cells. Our results underscore the crucial role of FAO in melanoma cell migration and support the potential therapeutic relevance of modulating cellular acetyl-CoA levels to inhibit cancer metastasis.

Thin Film Composite Membranes as a New Category of Alkaline Water Electrolysis Membranes.

Alkaline water electrolysis (AWE) is considered a promising technology for green hydrogen (H2 ) production. Conventional diaphragm-type porous membranes have a high risk of explosion owing to their high gas crossover, while nonporous anion exchange membranes lack mechanical and thermochemical stability, limiting their practical application. Herein, a thin film composite (TFC) membrane is proposed as a new category of AWE membranes. The TFC membrane consists of an ultrathin quaternary ammonium (QA) selective layer formed via Menshutkin reaction-based interfacial polymerization on a porous polyethylene (PE) support. The dense, alkaline-stable, and highly anion-conductive QA layer prevents gas crossover while promoting anion transport. The PE support reinforces the mechanical and thermochemical properties, while its highly porous and thin structure reduces mass transport resistance across the TFC membrane. Consequently, the TFC membrane exhibits unprecedentedly high AWE performance (1.16 A cm-2 at 1.8 V) using nonprecious group metal electrodes with a potassium hydroxide (25 wt%) aqueous solution at 80 °C, significantly outperforming commercial and other lab-made AWE membranes. Moreover, the TFC membrane demonstrates remarkably low gas crossover, long-term stability, and stack cell operability, thereby ensuring its commercial viability for green H2 production. This strategy provides an advanced material platform for energy and environmental applications.

Suppression of fatty acid oxidation supports pancreatic cancer growth and survival under hypoxic conditions through autophagy induction.

Hypoxia, one of the key features of solid tumors, induces autophagy, which acts as an important adaptive mechanism for tumor progression under hypoxic environment. Cellular metabolic reprogramming has been correlated with hypoxia, but the molecular connection to the induction of autophagy remains obscure. Here, we show that suppression of fatty acid oxidation (FAO) by hypoxia induces autophagy in human pancreatic ductal adenocarcinoma (PDAC) cells that is required for their growth and survival. Reduced cellular acetyl-CoA levels caused by FAO inhibition decreases LC3 acetylation, resulting in autophagosome formation. Importantly, PDAC cells are significantly dependent on this metabolic reprogramming, as improving FAO leads to a reduction in hypoxia-induced autophagy and an increase in cell death after chemotherapy. Thus, our study supports that suppression of FAO is an important metabolic response to hypoxia and indicates that targeting this pathway in PDAC may be an effective therapeutic approach.

Randomized clinical trial to evaluate the efficacy and safety of two types of sandblasted with large-grit and acid-etched surface implants with different surface roughness.

Objectives: This study aims to evaluate the efficacy and safety of two types of sandblasted with large-grit and acid-etched (SLA) surface implants with different surface roughness. Patients and. Methods: This study was conducted based on a clinical record review of 55 patients (mean age, 53.00 years). A total of 80 SLA surface implants was placed. Among the 80 implants, 38 implants placed in 29 subjects had surface roughness (Ra) of 3.09 µm (test group, TG), while the other 42 implants placed in 31 subjects had a surface roughness (Ra) of 2.50 µm (control group, CG). A comparison was made of implant primary/ secondary stability; success and survival rates; marginal bone loss; and soft tissue assessment including probing pocket depth (PPD), plaque index (PI), gingival index (GI), and bleeding on probing (BOP) between the groups at 1 year after implant placement. Results: Among the implants that were initially registered, 1 from the TG and 4 from the CG dropped out, leaving 37 implants in the TG and 38 implants in the CG to be traced and analyzed. Although 1 TG case showed unstable primary stability, all cases showed stable secondary stability. Success and survival rates at 1 year after implant placement were 100% in both groups. Marginal bone loss was 0.07 mm and 0.00 mm for the TG and CG, respectively, but the difference was not significant. Among the several parameters for evaluation of soft tissue, the TG showed lower PI at 1 year after implant placement (TG=0.00, CG=0.29; P=0.0004), while the remaining categories showed no significant difference between the groups. Conclusion: This study shows that the two types of SLA implants with different surface roughness have no difference in efficacy or safety. Therefore, both of the implants can be used safely and with promising outcomes.

Long-term evaluation of the prognosis of super hydrophilic surface treated CA implants: a retrospective clinical study.

BACKGROUND: This study was performed to evaluate the long-term clinical efficacy of the CA implants (Osstem Implant, Busan, Korea), calcium-modified surfaced treated implants on acid-etched surfaces sandblasted with alumina. METHODS: From January 2013 to December 2015, 258 implants of 120 patients placed between 2013 and 2015 were retrospectively studied. Using medical records and periapical radiographs, sex, age, location, fixture width and length of placed implants, presence or absence of bone graft, types of bone substitutes and membrane used for bone grafting, primary and secondary stability, initial and delayed complications, and marginal bone loss were investigated. The success rate and survival rate of the implants in each group were analyzed retrospectively based on the criteria suggested by Albrektsson et al. RESULTS: Between 2013 and 2015, with a follow-up longer than 5 years, 258 implants with an average diameter of 4.63 mm (3.5-5.5 mm) and an average length of 9.94 mm (7.0-13.0 mm) were placed in a total of 120 patients (61 males and 59 females) with a mean age of 63.7 years for an average of 62 months of observation period. The survival rate was 97.3%, the success rate was 94.2%, and the average final marginal bone loss was 0.074 mm. CONCLUSION: The CA implants manufactured with the improved surface treatment method exhibited a survival rate of 97.3% and a success rate of 94.2% over an average observation period of 62 months. The implants were not affected by most factors and had very high survival and success rates over a long period of observation. In particular, the stability of the implant was excellent, with no cases of failed implants in delayed placement after bone grafting and a healing period.

The Structural Effect of Electrode Mesh on Hydrogen Evolution Reaction Performance for Alkaline Water Electrolysis.

Alkaline water electrolysis (AWE) is a mature water electrolysis technology that can produce green hydrogen most economically. This is mainly attributed to the use of Ni-based materials that are easy to process and inexpensive. The nickel-based meshes with various structures such as woven mesh and expanded mesh are widely used as electrode in the AWE due to its common availability and easy fabrication. However, the morphological effect of meshes on hydrogen evolution reaction (HER) performance has not been studied. Here a new parameter to determine the structural effect of mesh on HER performance was first proposed. The key factors of the parameter were found to be the strand width, pore width and the strand surface area. The woven mesh with the ratio of pore width to strand width that converges to 1 showed the lowest the overpotential. The expanded mesh with the higher the structural surface area exhibited the lowest the overpotential. This study will help to choose an optimal structure for the mesh with the HER electrode.

Mitochondrial glutamine metabolism regulates sensitivity of cancer cells after chemotherapy via amphiregulin.

The DNA damage response is essential for sustaining genomic stability and preventing tumorigenesis. However, the fundamental question about the cellular metabolic response to DNA damage remains largely unknown, impeding the development of metabolic interventions that might prevent or treat cancer. Recently, it has been reported that there is a link between cell metabolism and DNA damage response, by repression of glutamine (Gln) entry into mitochondria to support cell cycle arrest and DNA repair. Here, we show that mitochondrial Gln metabolism is a crucial regulator of DNA damage-induced cell death. Mechanistically, inhibition of glutaminase (GLS), the first enzyme for Gln anaplerosis, sensitizes cancer cells to DNA damage by inducing amphiregulin (AREG) that promotes apoptotic cell death. GLS inhibition increases reactive oxygen species production, leading to transcriptional activation of AREG through Max-like protein X (MLX) transcription factor. Moreover, suppression of mitochondrial Gln metabolism results in markedly increased cell death after chemotherapy in vitro and in vivo. The essentiality of this molecular pathway in DNA damage-induced cell death may provide novel metabolic interventions for cancer therapy.

On the Development of Autonomous Vehicle Safety Distance by an RSS Model Based on a Variable Focus Function Camera.

Today, a lot of research on autonomous driving technology is being conducted, and various vehicles with autonomous driving functions, such as ACC (adaptive cruise control) are being released. The autonomous vehicle recognizes obstacles ahead by the fusion of data from various sensors, such as lidar and radar sensors, including camera sensors. As the number of vehicles equipped with such autonomous driving functions increases, securing safety and reliability is a big issue. Recently, Mobileye proposed the RSS (responsibility-sensitive safety) model, which is a white box mathematical model, to secure the safety of autonomous vehicles and clarify responsibility in the case of an accident. In this paper, a method of applying the RSS model to a variable focus function camera that can cover the recognition range of a lidar sensor and a radar sensor with a single camera sensor is considered. The variables of the RSS model suitable for the variable focus function camera were defined, the variable values were determined, and the safe distances for each velocity were derived by applying the determined variable values. In addition, as a result of considering the time required to obtain the data, and the time required to change the focal length of the camera, it was confirmed that the response time obtained using the derived safe distance was a valid result.

Cerium Oxide-Polysulfone Composite Separator for an Advanced Alkaline Electrolyzer.

The intermittent and volatile nature of renewable energy sources threatens the stable operation of power grids, necessitating dynamically operated energy storage. Power-to-gas technology is a promising method for managing electricity variations on a large gigawatt (GW) scale. The electrolyzer is a key component that can convert excess electricity into hydrogen with high flexibility. Recently, organic/inorganic composite separators have been widely used as diaphragm membranes; however, they are prone to increase ohmic resistance and gas crossover, which inhibit electrolyzer efficiency. Here, we show that the ceria nanoparticle and polysulfone composite separator exhibits a low area resistance of 0.16 Ω cm2 and a hydrogen permeability of 1.2 × 10-12 mol cm-1 s-1 bar-1 in 30 wt% potassium hydroxide (KOH) electrolyte, which outperformed the commercial separator, the Zirfon PERL separator. The cell using a 100 nm ceria nanoparticle/polysulfone separator and advanced catalysts has a remarkable capability of 1.84 V at 800 mA cm-2 at 30 wt% and 80 °C. The decrease in the average pore size of 77 nm and high wettability (contact angle 75°) contributed to the reduced ohmic resistance and low gas crossover. These results demonstrate that the use of ceria nanoparticle-based separators can achieve high performance compared to commercial zirconia-based separators.

The long-term evaluation of the prognosis of implants with acid-etched surfaces sandblasted with alumina: a retrospective clinical study.

BACKGROUND: The aim of this study was to evaluate the long-term clinical stability of implants with acid-etched surfaces sandblasted with alumina using retrospective analyses of the survival rate, success rate, primary and secondary stability, complications, and marginal bone loss of the implants. METHODS: Patients who had implants placed (TS III SA, SS II SA, SS III SA, and U III SA) with SA surfaces from Osstem (Osstem Implant Co., Busan, Korea) at the Seoul National University Bundang Hospital, from January 2008 to December 2010 were selected for the study. Patients' medical records and radiographs (panorama, periapical view) were retrospectively analyzed to investigate sex, age, location of implantation, diameter, and length of the implants, initial and secondary stability, presence of bone grafting, types of bone grafting and membranes, early and delayed complications, marginal bone loss, and implant survival rate. RESULTS: Ninety-six implants were placed in 45 patients. Five implants were removed during the follow-up period for a total survival rate of 94.8%. There were 14 cases of complications, including 6 cases of early complications and 8 cases of delayed complications. All five implants that failed to survive were included in the early complications. The survival of implants was significantly associated with the occurrence of complications and the absorption of bone greater than 1 mm within 1 year after prosthetic completion. In addition, the absorption of bone greater than 1 mm within 1 year after prosthetic completion was significantly associated with the occurrence of complications, primary stability, and implant placement method. Five cases that failed to survive were all included in the early complications criteria such as infection, failure of initial osseointegration, and early exposure of the fixture. CONCLUSIONS: Of the 96 cases, 5 implants failed resulting in a 94.8% survival rate. The failed implants were all cases of early complications such as infection, failure of initial osseointegration, and early exposure of the fixtures. Peri-implantitis was mostly addressed through conservative and/or surgical treatment and resulted in very low prosthetic complications. Therefore, if preventive measures are taken to minimize initial complications, the results can be very stable.

Shaping Rollable Display Devices: Effects of Gripping Condition, Device Thickness, and Hand Length on Bimanual Perceived Grip Comfort.

OBJECTIVE: To examine the effects of the gripping condition, device thickness, and hand length on bimanual perceived grip comfort associated with unrolling hand-held rollable screens. BACKGROUND: Rollable displays can be rolled and unrolled to change screen size. Although diverse rollable display device concepts have been suggested, little is known regarding ergonomic forms for comfortable screen unrolling. METHOD: Thirty young individuals (10 in each hand-length group) evaluated three rollable display device prototypes in three gripping conditions (no restriction on using side bezels, minimal use of side bezels, and restriction on the gripping type). Prototypes differed in their right-side thickness (2, 6, and 10 mm). Side bezel regions grasped during screen unrolling and corresponding bimanual grip comfort ratings were obtained. RESULTS: To improve perceived grip comfort and accommodate user-preferred gripping methods, rollable display devices should be 6 mm (preferably 10 mm) thick (vs. 2 mm) and have at least 20-mm-wide side bezels. Relative to device thickness, gripping conditions were more influential on grip comfort ratings. The "no restriction" condition improved grip comfort ratings and strengthened bimanual coupling in terms of grip comfort ratings. CONCLUSION: Contrary to current smartphone trends toward thinner and bezel-less designs, hand-held rollable display devices should be sufficiently thick and have sufficiently wide side bezels for screen unrolling. APPLICATION: Hand-held rollable display devices should be 6- or preferably 10-mm thick (vs. 2 mm) and have at least 20-mm-wide side bezels to ensure higher perceived grip comfort during bilateral screen unrolling.

Where to put the creases? Interactions between hand length, task, screen size, and folding method on the suitability of hand-held foldable display devices.

Limited information is available regarding ergonomic foldable display device forms. This two-stage study involving young South Koreans (divided into three hand-length groups) was conducted to determine ergonomic forms for hand-held foldable display devices considering folding/unfolding comfort and preference. Stage I obtained the suitability of three screen sizes for five tasks. Stage II evaluated 14 different bi- and tri-folding methods considering screen size, folding direction, and folding time. The effects of hand length were all non-significant. Screen size preferences were task-dependent; small screens were preferred for making calls, and medium screens for web searching and gaming. Folding methods affected folding/unfolding comfort and preference; outward screen and Z-shape screen folding were the most preferred bi- and tri-fold concepts, respectively. Screen protection and access appeared to be competing factors in the user preference determination process. Foldable screen size and folding method should be determined by considering tasks, folding/unfolding comfort, and user preferences. Practitioner summary: A 13.5 cm screen was preferred for making calls, whereas a 17.5 cm screen was best for web searching and gaming. An outward bi-fold screen concept with a 17.5 cm screen and Z-shape tri-fold screen concept with a 22.9 cm screen were preferred. Overall, the Z-shape concept was most preferred. Abbreviations: SD: standard deviation; ANOVA: analysis of variance; H: Height; W: Width; T: Thickness.

Mitochondrial GPT2 plays a pivotal role in metabolic adaptation to the perturbation of mitochondrial glutamine metabolism.

Cancer cells exhibit metabolic dependence on mitochondrial glutamine metabolism that provides them with the substrates required for rapid proliferation. Despite the extensive efforts to target this glutamine addiction for therapeutic purposes, the adaptive metabolic responses and the mechanisms whereby cells maintain their unlimited growth remain areas of active investigation. Here we report that mitochondrial glutamate-pyruvate transaminase 2 (GPT2) contributes to cell survival and growth by sustaining the tricarboxylic acid (TCA) cycle anaplerosis after the inhibition of glutaminase (GLS), the first enzyme for mitochondrial glutamine metabolism. We found that elevated reactive oxygen species upon GLS inhibition induce GPT2 expression via activating transcription factor 4. Moreover, inhibition of GPT2 synergized with suppression of GLS activity to induce a pronounced reduction in proliferation and an increase in cell death of cancer cells. Our data uncover GPT2 as an important component of the adaptive metabolic response for glutamine deprivation and indicate that targeting this pathway in combination with GLS inhibition may be an effective therapeutic approach for cancer treatment.