Enhancement of protective vaccine-induced antibody titer to swine diseases and growth performance by Amino-Zn, yucca extract, and ß-mannanase feed additive in wean-finishing pigs.

The primary purpose of this research is to determine the effect of Amino-Zn (AZn), Yucca schidigera extract (YE), and ß-mannanase enzyme supplementation on growth performance, nutrient digestibility, fecal gas emission, and immune response in pigs. A total of 180 crossbred pigs (6.57 ± 1 kg) were randomly assigned to one of three dietary treatments: CON-corn soybean meal (basal diet); TRT1-CON +1,000 ppm AZn + 0.07% yucca extract (YE) + 0.05% ß-mannanase; and TRT2-CON +2,000 ppm AZn + 0.07% YE+ 0.05% ß-mannanase for 22 weeks. Each treatment had 12 replicates with 5 pigs per pen. Pigs fed a diet supplemented with AZn, YE, and ß-mannanase linearly increased (p < 0.05) BW and average daily gain at weeks 6, 12, 17, and 18. In contrast, the gain-to-feed ratio showed a linear increase (p < 0.05) from weeks 6 to 17 and the overall trial period. Moreover, the inclusion of experimental diets linearly decreased (p > 0.05) noxious gas emissions such as ammonia, hydrogen sulfide, acetic acid, carbon dioxide, and methyl mercaptans. The dietary inclusion of AZn, YE, and ß-mannanase significantly increased the serological immune responses to Mycoplasma hyopneumoniae (MH) and foot-and-mouth disease virus (FMDV-O type) at the end of week 6 and porcine circovirus-2 (PCV-2) at week 19. Based on this result, we infer that the combination of AZn, YE, and ß-mannanase supplement would serve as a novel in-feed additive to enhance growth performance and act as a boosting agent and immune stimulatory to increase the efficacy of swine vaccinations.

Meniscus-Guided Micro-Printing of Prussian Blue for Smart Electrochromic Display.

Using energy-saving electrochromic (EC) displays in smart devices for augmented reality makes cost-effective, easily producible, and efficiently operable devices for specific applications possible. Prussian blue (PB) is a metal-organic coordinated compound with unique EC properties that limit EC display applications due to the difficulty in PB micro-patterning. This work presents a novel micro-printing strategy for PB patterns using localized crystallization of FeFe(CN)6 on a substrate confined by the acidic-ferric-ferricyanide ink meniscus, followed by thermal reduction at 120 °C, thereby forming PB. Uniform PB patterns can be obtained by manipulating printing parameters, such as the concentration of FeCl3 ·K3 Fe(CN)6 , printing speed, and pipette inner diameter. Using a 0.1 M KCl (pH 4) electrolyte, the printed PB pattern is consistently and reversibly converted to Prussian white (CV potential range: -0.2-0.5 V) with 200 CV cycles. The PB-based EC display with a navigation function integrated into a smart contact lens is able to display directions to a destination to a user by receiving GPS coordinates in real time. This facile method for forming PB micro-patterns could be used for advanced EC displays and various functional devices.

Effect of Oxidation Time on the Properties of Cellulose Nanocrystals Prepared from Balsa and Kapok Fibers Using Ammonium Persulfate.

This study aimed to evaluate the effect of ammonium persulfate's (APS) oxidation time on the characteristics of the cellulose nanocrystals (CNCs) of balsa and kapok fibers after delignification pretreatment with sodium chlorite/acetic acid. This two-step method is important for increasing the zeta potential value and achieving higher thermal stability. The fibers were partially delignified using acidified sodium chlorite for four cycles, followed by APS oxidation at 60 °C for 8, 12, and 16 h. The isolated CNCs with a rod-like structure showed an average diameter in the range of 5.5-12.6 nm and an aspect ratio of 14.7-28.2. Increasing the reaction time resulted in a gradual reduction in the CNC dimensions. The higher surface charge of the balsa and kapok CNCs was observed at a longer oxidation time. The CNCs prepared from kapok had the highest colloid stability after oxidation for 16 h (-62.27 mV). The CNCs with higher crystallinity had longer oxidation times. Thermogravimetric analysis revealed that the CNCs with a higher thermal stability had longer oxidation times. All of the parameters were influenced by the oxidation time. This study indicates that APS oxidation for 8-16 h can produce CNCs from delignified balsa and kapok with satisfactory zeta potential values and thermal stabilities.

Critical Image Identification via Incident-Type Definition Using Smartphone Data during an Emergency: A Case Study of the 2020 Heavy Rainfall Event in Korea.

In unpredictable disaster scenarios, it is important to recognize the situation promptly and take appropriate response actions. This study proposes a cloud computing-based data collection, processing, and analysis process that employs a crowd-sensing application. Clustering algorithms are used to define the major damage types, and hotspot analysis is applied to effectively filter critical data from crowdsourced data. To verify the utility of the proposed process, it is applied to Icheon-si and Anseong-si, both in Gyeonggi-do, which were affected by heavy rainfall in 2020. The results show that the types of incident at the damaged site were effectively detected, and images reflecting the damage situation could be classified using the application of the geospatial analysis technique. For 5 August 2020, which was close to the date of the event, the images were classified with a precision of 100% at a threshold of 0.4. For 24-25 August 2020, the image classification precision exceeded 95% at a threshold of 0.5, except for the mudslide mudflow in the Yul area. The location distribution of the classified images showed a distribution similar to that of damaged regions in unmanned aerial vehicle images.

Mechanical Performance and Dimensional Stability of Bamboo Fiber-Based Composite.

The bamboo fiber-based composite (BFBC) has high-performce in terms of mechanical properties and dimensional stability. In this study, BFBCs were prepared with different hot-pressing temperatures (150 °C, 160 °C, 170 °C, 180 °C, 190 °C, and 200 °C) and designed with different densities (1.05 g/cm3, 1.10 g/cm3, 1.15 g/cm3 and 1.20 g/cm3), and their selected properties were evaluated. Temperature affected BFBC performance, which, with a general increase in temperature, showed a decrement in mechanical properties and an improvement in dimensional stability. Holocellulose content significantly decreased, and the color of BFBC became darker with the increasing of the press temperature. As the density of BFBC increased, the modulus of elasticity (MOE) significantly increased from 23.09 GPa to 27.01 GPa with the increase in temperature. The thickness swelling ratio (TSR), width swelling ratio (WSR) and water absorption ratio (WAR) declined by more than 30% with the increase in density. Overall, the results of this study provide a theoretical basis and a source of technical support to promote the design, application, and popularization of BFBC in different fields.

Changes in the Dimensions of Lignocellulose Nanofibrils with Different Lignin Contents by Enzymatic Hydrolysis.

Changes in the dimensions of lignocellulose nanofibrils (LCNFs) with different lignin contents from betung bamboo (Dendrocalamus asper) by enzymatic hydrolysis using endoglucanase (EG) were investigated. Lignin contents were adjusted from 3% to 27% by NaClO2/acetic acid treatment, and LCNFs were prepared using a wet disk-mill (WDM). The dimensions of the LCNFs significantly decreased with decreasing lignin content and increasing EG addition. With increasing EG content, the average diameter of the LCNFs significantly decreased, even though they contained parts of hemicellulose and lignin. The crystal structure showed the typical cellulose I structure in all samples, but the intensity of the diffraction peak slightly changed depending on the lignin and EG contents. The crystallinity index (CrI) values of the LCNFs increased a maximum of 23.8% (LCNF-L27) under increasing EG addition, regardless of the lignin content. With the EG addition of three times the LCNF amount, LCNF-L3 showed the highest CrI value (59.1%). By controlling the composition and structure of LCNFs, it is expected that the wide range of properties of these materials can extend the property range available for existing materials.

A Comprehensive Study on the Effect of TiN Top and Bottom Electrodes on Atomic Layer Deposited Ferroelectric Hf0.5Zr0.5O2 Thin Films.

The discovery of ferroelectricity in HfO2-based materials in 2011 provided new research directions and opportunities. In particular, for atomic layer deposited Hf0.5Zr0.5O2 (HZO) films, it is possible to obtain homogenous thin films with satisfactory ferroelectric properties at a low thermal budget process. Based on experiment demonstrations over the past 10 years, it is well known that HZO films show excellent ferroelectricity when sandwiched between TiN top and bottom electrodes. This work reports a comprehensive study on the effect of TiN top and bottom electrodes on the ferroelectric properties of HZO thin films (10 nm). Investigations showed that during HZO crystallization, the TiN bottom electrode promoted ferroelectric phase formation (by oxygen scavenging) and the TiN top electrode inhibited non-ferroelectric phase formation (by stress-induced crystallization). In addition, it was confirmed that the TiN top and bottom electrodes acted as a barrier layer to hydrogen diffusion into the HZO thin film during annealing in a hydrogen-containing atmosphere. These features make the TiN electrodes a useful strategy for improving and preserving the ferroelectric properties of HZO thin films for next-generation memory applications.

Juglone Suppresses LPS-induced Inflammatory Responses and NLRP3 Activation in Macrophages.

The NLRP3 (NACHT, LRR and PYD domains-containing protein 3) inflammasome has been implicated in a variety of diseases, including atherosclerosis, neurodegenerative diseases, and infectious diseases. Thus, inhibitors of NLRP3 inflammasome have emerged as promising approaches to treat inflammation-related diseases. The aim of this study was to explore the effects of juglone (5-hydroxyl-1,4-naphthoquinone) on NLRP3 inflammasome activation. The inhibitory effects of juglone on nitric oxide (NO) production were assessed in lipopolysaccharide (LPS)-stimulated J774.1 cells by Griess assay, while its effects on reactive oxygen species (ROS) and NLRP3 ATPase activity were assessed. The expression levels of NLRP3, caspase-1, and pro-inflammatory cytokines (IL-1ß, IL-18) and cytotoxicity of juglone in J774.1 cells were also determined. Juglone was non-toxic in J774.1 cells when used at 10 µM (p < 0.01). Juglone treatment inhibited the production of ROS and NO. The levels of NLRP3 and cleaved caspase-1, as well as the secretion of IL-1ß and IL-18, were decreased by treatment with juglone in a concentration-dependent manner. Juglone also inhibited the ATPase activities of NLRP3 in LPS/ATP-stimulated J774.1 macrophages. Our results suggested that juglone could inhibit inflammatory cytokine production and NLRP3 inflammasome activation in macrophages, and should be considered as a therapeutic strategy for inflammation-related diseases.

Repeated Dry Sauna Therapy Improves Quality of Life in Obese Korean People.

BACKGROUND: Dry sauna treatments improve the quality of life for chronic pain, congestive heart failure, and type 2 diabetes patients. This study aimed to determine whether dry sauna therapy improved the quality of life of obese people. METHODS: A total of 38 consecutive participants aged over 20 years with a body mass index of ≥25 kg/m2 were recruited for the study. The participants were treated with a 90°C dry sauna for 15 minutes, twice daily for 4 consecutive days. To assess the quality of life, all participants completed the 5 level EQ-5D questionnaires and the EQ-Visual Analog Scale. Study parameters were measured on the same day prior to commencing the sauna sessions in a fasted state and 2 days after the last sauna session. RESULTS: The average age was 62.3±9.5 years; 84.2% of the participants were female. The mean body mass index was 28.5±2.4 kg/m2. Dry sauna significantly improved the mean 5 level EQ-5D index scores from 0.83±0.12 to 0.89±0.11 and increased the mean EQ-Visual Analog Scale from 79.0±15.2 to 91.1±9.7. However, there were no significant changes in body mass index, blood pressure, heart rate, or body composition before and after the 8-session sauna therapy. CONCLUSION: Dry sauna improved the health-related quality of life of obese patients without adverse events. Further clinical studies in larger study populations are needed to verify these findings and provide concrete evidence for obesity treatment.

Multicolor 4D printing of shape-memory polymers for light-induced selective heating and remote actuation.

Four-dimensional (4D) printing can add active and responsive functions to three-dimensional (3D) printed objects in response to various external stimuli. Light, among others, has a unique advantage of remotely controlling structural changes to obtain predesigned shapes. In this study, we demonstrate multicolor 4D printing of shape-memory polymers (SMPs). Using color-dependent selective light absorption and heating in multicolor SMP composites, we realize remote actuation with light illumination. We experimentally investigate the temperature changes in colored SMPs and observe a clear difference between the different colors. We also present simulations and analytical calculations to theoretically model the structural variations in multicolor composites. Finally, we consider a multicolor hinged structure and demonstrate the multistep actuation by changing the color of light and duration of illumination. 4D printing can allow complex, multicolor geometries with predesigned responses. Moreover, SMPs can be reused multiple times for thermal actuation by simply conducting thermomechanical programming again. Therefore, 4D printing of multicolor SMP composites have unique merits for light-induced structural changes. Our study indicates that multicolor 4D printing of SMPs are promising for various structural changes and remote actuation.

Shaping Microcrystals of Metal-Organic Frameworks by Reaction-Diffusion.

When components of a metal-organic framework (MOF) and a crystal growth modulator diffuse through a gel medium, they can form arrays of regularly-spaced precipitation bands containing MOF crystals of different morphologies. With time, slow variations in the local concentrations of the growth modulator cause the crystals to change their shapes, ultimately resulting in unusual concave microcrystallites not available via solution-based methods. The reaction-diffusion and periodic precipitation phenomena 1) extend to various types of MOFs and also MOPs (metal-organic polyhedra), and 2) can be multiplexed to realize within one gel multiple growth conditions, in effect leading to various crystalline phases or polycrystalline formations.

Adsorption Characteristics of Ag Nanoparticles on Cellulose Nanofibrils with Different Chemical Compositions.

The adsorption characteristics of silver nanoparticles (AgNPs) on cellulose nanofibrils (CNFs) were investigated herein with different chemical compositions. Pure cellulose nanofibers (PCNFs), lignocellulose nanofibers (LCNFs) with different lignin contents (LCNF-20% and LCNF-31%), and holocellulose nanofibers (HCNFs) with hemicellulose were used in this study. Furthermore, CNFs and silver nitrate were mixed and reacted at different temperatures, and NaBH4 was used as the reducing agent. First, the effect of temperature on the adsorption of AgNPs on PCNF was studied. At an optimal temperature (45 °C), the effect of the chemical composition of CNF was studied. The overall properties were analyzed using UV-vis spectroscopy, transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The AgNPs were found to be spherical under all conditions with average diameter of 5.3 nm (PCNF), 5.6 nm (HCNF), 6.3 nm (LCNF-20%) and 6.6 nm (LCNF-31%). The amount of AgNPs adsorbed on the CNF was observed to vary, based on the chemical composition of the CNF. The adsorption amount of AgNPs was observed to increase in the order of LCNF-20% > PCNF > LCNF-31% > HCNF. The results indicated that phenolic hydroxyl groups present in LCNF significantly affected the adsorption of AgNPs.

Effect of Lignin Plasticization on Physico-Mechanical Properties of Lignin/Poly(Lactic Acid) Composites.

Kraft lignin (KL) or plasticized KL (PKL)/poly(lactic acid) (PLA) composites, containing different lignin contents and with and without the coupling agent, were prepared in this study using twin-screw extrusion at 180 °C. Furthermore, ε-caprolactone and polymeric diphenylmethane diisocyanate (pMDI) were used as a plasticizer of KL and a coupling agent to improve interfacial adhesion, respectively. It was found that lignin plasticization improved lignin dispersibility in the PLA matrix and increased the melt flow index due to decrease in melt viscosity. The tensile strength of KL or PKL/PLA composites was found to decrease as the content of KL and PKL increased in the absence of pMDI, and increased due to pMDI addition. The existence of KL and PKL in the composites decreased the thermal degradation rate against the temperature and increased char residue. Furthermore, the diffusion coefficient of water in the composites was also found to decrease due to KL or PKL addition.

Effects of pH on Nanofibrillation of TEMPO-Oxidized Paper Mulberry Bast Fibers.

TEMPO oxidation was conducted as a pretreatment to achieve efficient nanofibrillation of long paper mulberry bast fibers (PMBFs). The pH dependency of nanofibrillation efficiency and the characteristics of the resulting cellulose nanofibrils (CNFs) were investigated. As the pH increased, the negative value of the zeta potential of TEMPO-oxidized fibers increased. The increase in electrostatic repulsion at pH values of greater than 9 prevented the entanglement of long PMBFs, which was a drawback for defibrillation at acidic pH. With increasing pH, the CNF production yield was increased. The crystallinity index of TEMPO-oxidized CNFs from PMBFs was 83.5%, which was higher than that of TEMPO-oxidized CNFs from softwood fibers in the same conditions. The tensile strength of nanopaper from TEMPO-oxidized PMBF CNFs was 110.18 MPa, which was approximately 30% higher than that (84.19 MPa) of the TEMPO-oxidized CNFs from softwood fibers.

3D printing of twisting and rotational bistable structures with tuning elements.

Three-dimensional (3D) printing is ideal for the fabrication of various customized 3D components with fine details and material-design complexities. However, most components fabricated so far have been static structures with fixed shapes and functions. Here we introduce bistability to 3D printing to realize highly-controlled, reconfigurable structures. Particularly, we demonstrate 3D printing of twisting and rotational bistable structures. To this end, we have introduced special joints to construct twisting and rotational structures without post-assembly. Bistability produces a well-defined energy diagram, which is important for precise motion control and reconfigurable structures. Therefore, these bistable structures can be useful for simplified motion control in actuators or for mechanical switches. Moreover, we demonstrate tunable bistable components exploiting shape memory polymers. We can readjust the bistability-energy diagram (barrier height, slope, displacement, symmetry) after printing and achieve tunable bistability. This tunability can significantly increase the use of bistable structures in various 3D-printed components.

Dry sauna therapy is beneficial for patients with low back pain.

BACKGROUND: Dry sauna has been very popular as an alternative therapy for promoting health among people who want to improve their health condition without relying on pharmaceuticals. The aim of this study was to investigate whether dry sauna therapy improved quality of life and reduced pain in participants with low back pain. METHODS: Study participants comprised a total of 37 consecutive patients who were over 20 years of age with low back pain. Dry sauna therapy was performed twice per day for 5 consecutive days over the course of 1 week, thus comprising a total of 10 sessions each of 15 min of exposure to a 90°C dry sauna. RESULTS: The verbal numerical rating scale (VNRS) and Oswestry disability index (ODI) scores were significantly reduced after dry sauna therapy (P < 0.001 for both). VNRS pain scores had a median (range) of 5 (2-8) before dry sauna therapy and 3 (0-8) after dry sauna therapy. ODI scores had a median (range) of 12 (2-24) before dry sauna therapy and 8 (1-17) after dry sauna therapy. The proportion of participants who reported successful treatment (excellent + good) was 70%. No adverse effects were observed related to dry sauna therapy. CONCLUSIONS: Our results suggest that dry sauna therapy may be useful to improve quality of life and reduce pain in patients with low back pain. Therefore, pain physicians can recommend dry sauna therapy as an alternative and complimentary therapy for patients with low back pain.

Crystal structure of bis-[2-(benzo-thia-zol-2-yl)phenolato-κ(2) N,O]copper(II).

In the title complex, [Cu(C13H8NOS)2], the Cu(II) atom is coordinated by two N atoms and two O atoms from two bidentate benzo-thia-zolphenolate ligands, forming a distorted tetra-hedral geometry [dihedral angle between two N-Cu-O planes: 45.1 (2)°]. The dihedral angles between the benzo-thia-zole ring systems and the phenol rings are 4.1 (4) and 5.8 (4)°, indicating an almost planar geometry. Weak intra- and inter-molecular C-H⋯O hydrogen bonds are observed. In the crystal, weak π-π inter-actions between aromatic and thia-zole rings [centroid-centroid distances = 3.626 (3) and 3.873 (3) Å] link the mol-ecules into a two-dimensional supra-molecular network along the bc plane.

Crystal structure of chlorido-penta-kis(dimethyl sulfoxide-κO)chromium(III) dichloride.

In the complex cation of the title salt, [CrCl(C2H6OS)5]Cl2, the Cr(III) ion is coordinated by one chloride ligand and five O atoms from dimethyl sulfoxide (DMSO) ligands, leading to a slightly distorted octa-hedral coordination environment [O-Cr-O angles range from 86.69 (16) to 92.87 (16)°]. In the crystal, complex cations are arranged in hexa-gonally packed rows parallel to [010], with the chloride counter-anions situated in between. The inter-actions between cations and anions are mainly ionic in nature.

Crystal structure of a monoclinic polymorph of 5-amino-1,3,4-thia-diazol-2(3H)-one.

The title compound, C2H3N3OS, is a monoclinic (P21/c) polymorph of the previously reported triclinic structure [Kang et al. (2012 ▶). Acta Cryst. E68, o1198]. The asymmetric unit contains two independent mol-ecules which are essentially planar, with r.m.s. deviations of 0.001 and 0.032 Šfrom the mean plane defined by the seven non-H atoms. In the crystal, N-H⋯N and N-H⋯O hydrogen bonds link the mol-ecules into a sheet parallel to (111).

CdSe/ZnS quantum dot thin film formation by an electrospray deposition process for light-emitting devices.

About 30 nm quantum-dot thin films are formed by electrospray deposition (ESD) process and quantum-dot-light-emitting-diodes (QD-LEDs) are demonstrated. Maximum brightness of 23 000 cd m(-2) and current efficiency of 5.9 cd A(-1) are achieved with the ESD process. The ESD process can be a potential solution for large area quantum dot layers with simple and flexible control.