Clinical implications of genetic polymorphisms in blepharospasm.

The possible genetic variants associated with blepharospasm (BSP) and facial dystonia have been investigated. Although genetic variants associated with BSP have been extensively studied, the contribution of single-nucleotide polymorphisms towards this condition remains poorly understood. In addition, the etiology of BSP remains to be fully elucidated. Therefore, the present study aimed to assess the role of polymorphisms in the torsin 1A (TOR1A), dopamine receptor D (DRD)2 and DRD5 genes in South Korean patients with BSP. Furthermore, the role of genetic variants of these three aforementioned genes was investigated. A prospective case-control study was established, where 56 patients with BSP and 115 healthy controls were recruited at the Department of Ophthalmology of CHA Bundang Medical Center (Seongnam, South Korea) using single nucleotide polymorphisms analysis by real-time PCR. The TOR1A rs1182CC/DRD5 rs6283TC genotype combination was found to be associated with decreased BSP risk [adjusted odds ratio (AOR), 0.288; P=0.013]. DRD5 rs6283 was observed to be associated with the periocular type of BSP in the co-dominant (for the TC genotype; AOR, 0.370; P=0.029) and dominant models (AOR, 0.406; P=0.029). The recessive model of TOR1A rs1801968 (AOR, 0.245; P=0.030), and the recessive (AOR, 0.245; P=0.029) and over-dominant models (AOR, 2.437; P=0.019) of DRD2 rs1800497 were found to be associated with superior responses to botulinum neurotoxin A (BoNT) treatment. By contrast, dominant (AOR, 0.205; P=0.034) and additive (AOR, 0.227; P=0.030) models of DRD5 rs6283 were associated with poor responses to BoNT treatment. To conclude, these results suggested that DRD2 rs1800497 can confer genetic susceptibility to BSP responses to BoNT treatment, whereas the TOR1A rs1182CC/DRD5 rs6283TC genotype combination appeared to contribute to the association with BoNT efficacy in BSP.

Association of Polymorphisms in FSHR, INHA, ESR1, and BMP15 with Recurrent Implantation Failure.

Recurrent implantation failure (RIF) refers to two or more unsuccessful in vitro fertilization embryo transfers in the same individual. Embryonic characteristics, immunological factors, and coagulation factors are known to be the causes of RIF. Genetic factors have also been reported to be involved in the occurrence of RIF, and some single nucleotide polymorphisms (SNPs) may contribute to RIF. We examined SNPs in FSHR, INHA, ESR1, and BMP15, which have been associated with primary ovarian failure. A cohort of 133 RIF patients and 317 healthy controls consisting of all Korean women was included. Genotyping was performed by Taq-Man genotyping assays to determine the frequency of the following polymorphisms: FSHR rs6165, INHA rs11893842 and rs35118453, ESR1 rs9340799 and rs2234693, and BMP15 rs17003221 and rs3810682. The differences in these SNPs were compared between the patient and control groups. Our results demonstrate a decreased prevalence of RIF in subjects with the FSHR rs6165 A>G polymorphism [AA vs. AG adjusted odds ratio (AOR) = 0.432; confidence interval (CI) = 0.206-0.908; p = 0.027, AA+AG vs. GG AOR = 0.434; CI = 0.213-0.885; p = 0.022]. Based on a genotype combination analysis, the GG/AA (FSHR rs6165/ESR1 rs9340799: OR = 0.250; CI = 0.072-0.874; p = 0.030) and GG-CC (FSHR rs6165/BMP15 rs3810682: OR = 0.466; CI = 0.220-0.987; p = 0.046) alleles were also associated with a decreased RIF risk. Additionally, the FSHR rs6165GG and BMP15 rs17003221TT+TC genotype combination was associated with a decreased RIF risk (OR = 0.430; CI = 0.210-0.877; p = 0.020) and increased FSH levels, as assessed by an analysis of variance. The FSHR rs6165 polymorphism and genotype combinations are significantly associated with RIF development in Korean women.

Effect of closing material on hearing rehabilitation in stapedectomy and stapedotomy: A finite element analysis.

Stapedotomy or stapedectomy operations are often performed to treat otosclerosis. During the operation, the space created by bone removal is usually filled with a closing material such as fat or fascia. In this study, the effect of the Young's modulus of the closing material on the hearing level was investigated through the 3D finite element model of a human head including auditory periphery. The Young's moduli of the closing material used to implement stapedotomy and stapedectomy conditions in the model were varied from 1 kPa to 24 MPa. The results showed that the hearing level improved when the closing material was more compliant after stapedotomy. Therefore, when the stapedotomy was performed using fat whose Young's modulus is lowest among the potential closing materials, the hearing level recovered the best among all simulated cases. On the other hand, in stapedectomy, the Young's modulus did not have the linear relationship between the hearing level and the compliance of the closing material. Hence, the Young's modulus causing the best hearing rehabilitation in stapedectomy was found not at the end of the investigated range of Young's modulus but somewhere in the middle of the given range.

Reference velocity of a human head in bone conduction hearing: Finite element study.

A whole head or temporal bone has been used in experiments to understand the mechanism of bone conduction (BC) hearing. In these experiments, two assumptions are generally accepted: (1) a promontory can be a representative point to show the motion of a specimen in BC hearing, and (2) the promontory velocity is proportional to a cochlear response so that the higher the promontory velocity, the better the BC hearing. To confirm the two assumptions, we investigated the velocities of various points corresponding to different BC input types and directions in the head. In this investigation, we used the three-dimensional finite element model of a human head, including an auditory periphery. Results showed that a single promontory was insufficient to be a representative point to show the motion of a specimen because the specimen could have rotational motion at frequencies below 0.5 kHz and the localized deformation at frequencies above 3 kHz. The promontory velocity had the same pattern as the basilar membrane velocity at low and high frequencies. However, at mid-frequencies between 0.5 and 3 kHz, the promontory did not exhibit the same pattern of velocity as the basilar membrane. Therefore, one's BC hearing ability must be carefully determined on the basis of promontory velocity.

Genetic Variations miR-10aA>T, miR-30cA>G, miR-181aT>C, and miR-499bA>G and the Risk of Recurrent Pregnancy Loss in Korean Women

This study investigated the genetic association between recurrent pregnancy loss (RPL) and microRNA (miRNA) polymorphisms in miR-10aA>T, miR-30cA>G, miR-181aT>C, and miR-499bA>G in Korean women. Blood samples were collected from 381 RPL patients and 281 control participants, and genotyping of miR-10aA>T, miR-30cA>G, miR-181aT>C, and miR-499bA>G was carried out by TaqMan miRNA RT-Real Time polymerase chain reaction (PCR). Four polymorphisms were identified, including miR-10aA>T, miR-30cA>G, miR-181aT>C, and miR-499bA>G. MiR-10a dominant model (AA vs. AT + TT) and miR-499bGG genotypes were associated with increased RPL risk (adjusted odds ratio [AOR] = 1.520, 95% confidence interval [CI] = 1.038−2.227, p = 0.032; AOR = 2.956, 95% CI = 1.168−7.482, p = 0.022, respectively). Additionally, both miR-499 dominant (AA vs. AG + GG) and recessive (AA + AG vs. GG) models were significantly associated with increased RPL risk (AOR = 1.465, 95% CI = 1.062−2.020, p = 0.020; AOR = 2.677, 95% CI = 1.066−6.725, p = 0.036, respectively). We further propose that miR-10aA>T, miR-30cA>G, and miR-499bA>G polymorphisms effects could contribute to RPL and should be considered during RPL patient evaluation.

Genetic Polymorphisms in the 3'-Untranslated Regions of SMAD5, FN3KRP, and RUNX-1 Are Associated with Recurrent Pregnancy Loss.

Recurrent pregnancy loss (RPL) is typically defined as two or more consecutive pregnancy losses prior to 20 weeks of gestation. Although the causes of idiopathic RPL are not completely understood, vascular development and glucose concentration were reported to correlate with the pregnancy loss. The TGF-ß signaling pathway which plays a significant role in pregnancy is activated by the interaction between high glucose and SMAD signaling and affects the vascular cells. SMAD5 and RUNX-1 are involved in the TGF-ß signaling pathway and contribute to advanced glycation end products (AGEs) production and vascular development. FN3KRP, a newly described gene, is also associated with vascular diseases and suggested to relate to AGEs. Therefore, in the present study, we investigated associations between RPL risk and genetic polymorphisms of SMAD5, FN3KRP, and RUNX-1 in 388 women with RPL and 280 healthy control women of Korean ethnicity. Participants were genotyped using real-time polymerase chain reaction and restriction fragment length polymorphism assay to determine the frequency of SMAD5 rs10515478 C>G, FN3KRP rs1046875 G>A, and RUNX-1 rs15285 G>A polymorphisms. We found that women with RPL had lower likelihoods of the FN3KRP rs1046875 AA genotype (adjusted odds ratio (AOR), 0.553; p = 0.010) and recessive model (AOR, 0.631; p = 0.017). Furthermore, combination analysis showed that SMAD5 rs10515478 C>G and FN3KRP rs1046875 G>A mutant alleles were together associated with reduced RPL risk. These findings suggest that the FN3KRP rs1046875 G>A polymorphism has a significant role on the prevalence of RPL in Korean women. Considering that it is the first study indicating a significant association between FN3KRP and pregnancy disease, RPL, our results suggest the need for further investigation of the role of FN3KRP in pregnancy loss.

Association Study between Mucin 4 (MUC4) Polymorphisms and Idiopathic Recurrent Pregnancy Loss in a Korean Population.

Recurrent pregnancy loss (RPL) is the loss of two or more consecutive pregnancies before 20 weeks of gestational age. Our study investigated whether mucin 4 (MUC4) polymorphisms are associated with RPL. MUC polymorphisms (rs882605 C>A, rs1104760 A>G, rs2688513 A>G, rs2258447 C>T, and rs2291652 A>G) were genotyped in 374 women with RPL and 239 controls of Korean ethnicity using polymerase chain reaction-restriction fragment length polymorphism analysis and the TaqMan probe SNP genotyping assay. Differences in genotype frequencies between cases of RPL and the controls were compared. MUC4 rs882605 C>A and rs1104760 A>G polymorphisms were associated with increased incidence of RPL in three and four or more pregnancy loss patients. The haplotype analyses showed a tendency for the allelic effect including the association of MUC4 rs882605 A and rs1104760 G alleles with increased incidence of RPL. In addition, the MUC4 rs882605 CA/MUC4 rs2258447 CC genotype combination was associated with increased RPL prevalence. The two exonic polymorphisms lead to amino acid changes of protein and may act as pathogenic variants for RPL. In conclusion, the MUC4 rs882605 C>A and MUC4 rs1104760 A>G polymorphisms were associated with the susceptibility of RPL and we considered them as potential biomarkers for RPL.

Study of the Association between VEGF Polymorphisms and the Risk of Coronary Artery Disease in Koreans.

Coronary artery disease (CAD), a leading cause of death worldwide, has a complex etiology comprising both traditional risk factors (type 2 diabetes, dyslipidemia, arterial hypertension, and cigarette smoking) and genetic factors. Vascular endothelial growth factor (VEGF) notably contributes to angiogenesis and endothelial homeostasis. However, little is known about the relationship between CAD and VEGF polymorphisms in Koreans. The aim of this study is to investigate the associations of 2 VEGF promoter region polymorphisms (−1154G>A [rs1570360], −1498T>C [rs833061]) and 4 VEGF 3'-UTR polymorphisms (+936C>T [rs3025039], +1451C>T [rs3025040], +1612G>A [rs10434], and +1725G>A [rs3025053]) with CAD susceptibility in Koreans. We studied 885 subjects: 463 CAD patients and 422 controls. Genotyping was conducted with polymerase chain reaction-restriction fragment length polymorphism analysis and TaqMan allelic discrimination assays, and the genotype frequencies were calculated. We then performed haplotype and genotype combination analyses and measured the associations between VEGF polymorphisms and clinical variables in both the CAD patients and control subjects. We detected statistically significant associations between CAD and certain VEGF allele combinations. In the haplotypes of 5 single-nucleotide polymorphisms, the VEGF allele combination −1154A/+936T was associated with a decreased prevalence of CAD (A-T-T-G-G of VEGF −1154G>A/−1498T>C/+936C>T/+1612G>A/+1725G>A, AOR = 0.077, p = 0.021). In contrast, the VEGF allele combinations −1498T/+1725A and −1498T/+1612A/+1725A were associated with an increased prevalence of CAD (G-T-C-C-A of VEGF −1154G>A/−1498T>C/+936C>T/+1451C>T/+1725G>A, AOR = 1.602, p = 0.047; T-C-C-A-A of VEGF −1498T>C/+936C>T/+1451C>T/+1612G>A/+1725G>A, AOR = 1.582, p = 0.045). Gene−environment combinatorial analysis showed that the combination of the VEGF +1725AA genotype and several clinical factors (e.g., body mass index, hemoglobin A1c, and low-density lipoprotein cholesterol) increased the risk of CAD. Therefore, we suggest that VEGF polymorphisms and clinical factors may impact CAD prevalence.

Wave propagation across the skull under bone conduction: Dependence on coupling methods.

This study is aimed at the quantitative investigation of wave propagation through the skull bone and its dependence on different coupling methods of the bone conduction hearing aid (BCHA). Experiments were conducted on five Thiel embalmed whole head cadaver specimens. An electromagnetic actuator from a commercial BCHA was mounted on a 5-Newton steel headband, at the mastoid, on a percutaneously implanted screw (Baha® Connect), and transcutaneously with a Baha® Attract (Cochlear Limited, Sydney, Australia), at the clinical bone anchored hearing aid (BAHA) location. Surface motion was quantified by sequentially measuring ∼200 points on the skull surface via a three-dimensional laser Doppler vibrometer (3D LDV) system. The experimental procedure was repeated virtually, using a modified LiUHead finite element model (FEM). Both experiential and FEM methods showed an onset of deformations; first near the stimulation area, at 250-500 Hz, which then extended to the inferior ipsilateral skull surface, at 0.5-2 kHz, and spread across the whole skull above 3-4 kHz. Overall, stiffer coupling (Connect versus Headband), applied at a location with lower mechanical stiffness (the BAHA location versus mastoid), led to a faster transition and lower transition frequency to local deformations and wave motion. This behaviour was more evident at the BAHA location, as the mastoid was more agnostic to coupling condition.

Development of a finite element model of a human head including auditory periphery for understanding of bone-conducted hearing.

A three-dimensional finite-element (FE) model of a human head including the auditory periphery was developed to obtain a better understanding of bone-conducted (BC) hearing. The model was validated by comparison of cochlear and head responses in both air-conducted (AC) and BC hearing with experimental data. Specifically, the FE model provided the cochlear responses such as basilar membrane velocity and intracochlear pressure corresponding to BC stimulations applied to the mastoid or the conventional bone-anchored-hearing-aid (BAHA) positions. This is a strength of the model because it is difficult to obtain the cochlear responses from experiments corresponding to the BC stimulation applied at a specific position on the head surface. In addition, there have been few studies based on an FE model that can calculate the head and cochlear responses simultaneously from a BC stimulation. Moreover, in this study, the intracochlear sound pressure at multi-positions along the BM length was calculated and used to clarify the effect of stimulating force direction on the cochlear and promontory velocities in BC hearing. Also, the relationship between BC and AC stimulation and the basilar membrane velocity in the FE model was used to calculate the stimulation level at hearing thresholds which has been investigated only by psychoacoustical methods.

3'-UTR Polymorphisms in Thymidylate Synthase with Colorectal Cancer Prevalence and Prognosis.

Colorectal cancer (CRC) is the third most common type of cancer and the second leading cause of cancer-related mortality in Western countries. Polymorphisms in one-carbon metabolism and angiogenesis-related genes have been shown to play important roles in tumor development, progression, and metastasis for many cancers, including CRC. Moreover, recent studies have reported that polymorphisms in specific microRNA (miRNA)-binding regions, which are located in the 3'-untranslated region (UTR) of miRNA-regulated genes, are present in a variety of cancers. Here, we investigated the association between two thymidylate synthase (TYMS or TS) 3'-UTR polymorphisms, 1100T>C [rs699517] and 1170A>G [rs2790], and CRC susceptibility and progression in Korean patients. A total of 450 CRC patients and 400 healthy controls were enrolled in this study, and genotyping at the TS locus was performed by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) or TaqMan allelic discrimination assays. We found that TS 1170A>G genotypes, as well as the TS 1100T-1170G and 1100C-1170A haplotypes, are strongly associated with CRC. The TS 1100TC+CC type was associated with a poor survival (OS and RFS) rate. In addition, levels of the TS 1100C and TS 1170G allele were found to be significantly increased in CRC tissue. Our study provides the first evidence for 3'-UTR variants in TS genes as potential biomarkers of CRC prognosis and prevention.

Genetic Polymorphisms in miR-604A>G, miR-938G>A, miR-1302-3C>T and the Risk of Idiopathic Recurrent Pregnancy Loss.

The purpose of this study was to investigate whether polymorphisms in five microRNAs (miRNAs), miR-604A>G, miR-608C>G, 631I/D, miR-938G>A, and miR-1302-3C>T, are associated with the risk of idiopathic recurrent pregnancy loss (RPL). Blood samples were collected from 388 patients with idiopathic RPL (at least two consecutive spontaneous abortions) and 227 control participants. We found the miR-604 AG and AG + GG genotypes of miR-604, the miR-938 GA and GA + AA genotypes of miR-938, and the miR-1302-3CT and CT + TT genotypes of miR-1302-3 are less frequent than the wild-type (WT) genotypes, miR-604AA, miR-938GG, and miR-1302-3CC, respectively, in RPL patients. Using allele-combination multifactor dimensionality reduction (MDR) analysis, we found that eight haplotypes conferred by the miR-604/miR-608/miR-631/miR-938/miR-1302-3 allele combination, A-C-I-G-T, A-C-I-A-C, G-C-I-G-C, G-C-I-G-T, G-G-I-G-C, G-G-I-G-T, G-G-I-A-C, G-G-D-G-C, three from the miR-604/miR-631/miR-938/miR-1302-3 allele combination, A-I-G-T, G-I-G-C, G-I-A-T, one from the miR-604/miR-631/miR-1302-3 allele combination, G-I-C, and two from the miR-604/miR-1302-3 allele combination, G-C and G-T, were less frequent in RPL patients, suggesting protective effects (all p < 0.05). We also identified the miR-604A>G and miR-938G>A polymorphisms within the seed sequence of the mature miRNAs and aligned the seed sequences with the 3'UTR of putative target genes, methylenetetrahydrofolate reductase (MTHFR) and gonadotropin-releasing hormone receptor (GnRHR), respectively. We further found that the binding affinities between miR-604/miR-938 and the 3'UTR of their respective target genes (MTHFR, GnRHR) were significantly different for the common (miR-604A, miR-938G) and variant alleles (miR-604G, miR-938A). These results reveal a significant association between the miR-604A>G and miR-938G>A polymorphisms and idiopathic RPL and suggest that miRNAs can affect RPL in Korean women.

Association between HOTAIR lncRNA Polymorphisms and Coronary Artery Disease Susceptibility.

Coronary artery disease (CAD), one of the most frequent causes of mortality, is the most common type of cardiovascular disease. This condition is characterized by the accumulation of plaques in the coronary artery, leading to blockage of blood flow to the heart. The main symptom of CAD is chest pain caused by blockage of the coronary artery and shortness of breath. HOX transcript antisense RNA gene (HOTAIR) is a long non-coding RNA which is well-known as an oncogene involved in various cancers, such as lung, breast, colorectal, and gastric cancer. We selected six single nucleotide polymorphisms, rs4759314 A>G, rs1899663 G>T, rs920778 T>C, rs7958904 G>C, rs12826786 C>T, and rs874945 C>T, for genotype frequency analysis and assessed the frequency of HOTAIR gene polymorphisms in 442 CAD patients and 418 randomly selected control subjects. To analyze the differences between these two populations, we performed a Student's t-test, adjusted odds ratio (AOR), 95% confidence intervals (CIs), and ANOVA analysis. According to our baseline characteristic analysis, control subjects and CAD patients were significantly different in hypertension and diabetes mellitus. We also found that the rs4759314 A>G, rs1899663 G>T, and rs12826786 C>T genotypes were strongly associated with CAD susceptibility (AA vs. AG+GG: AOR = 0.608, 95% CI = 0.393-0.940, p = 0.025; GG vs. TT: AOR = 2.276, 95% CI = 1.125-4.607, p = 0.022; CC vs. CT+TT: AOR = 1.366, 95% CI = 1.027-1.818, p = 0.032, respectively). Our data also demonstrated that the genotype of HOTAIR polymorphisms, genotype combination, and haplotype analysis affect disease occurrence. Moreover, these polymorphisms are linked to clinical factors that contribute to disease susceptibility. In conclusion, results from our study suggest that HOTAIR polymorphisms may be useful novel biomarkers for diagnosing CAD.

A novel diagnostic method based on filter bank theory for fast and accurate detection of thermoacoustic instability.

This study proposes and analyzes a novel methodology that can effectively detect multi-mode combustion instability (CI) in a gas turbine combustor. The experiment is conducted in a model gas turbine combustor, and dynamic pressure (DP) and flame images are examined during the transition from stable to unstable flame, which is driven by changing fuel compositions. As a powerful technique for early detection of CI in multi-mode as well as in single mode, a new filter bank (FB) method based on spectral analysis of DP is proposed. Sequential processing using a triangular filter with Mel-scaling and a Hamming window is applied to increase the accuracy of the FB method, and the instability criterion is determined by calculating the magnitude of FB components. The performance of the FB method is compared with that of two conventional methods that are based on the root-mean-squared DP and temporal kurtosis. From the results, the FB method shows comparable performance in detection speed, sensitivity, and accuracy with other parameters. In addition, the FB components enable the analysis of various frequencies and multi-mode frequencies. Therefore, the FB method can be considered as an additional prognosis tool to determine the multi-mode CI in a monitoring system for gas turbine combustors.

Relationship between Endolymphatic Hydrops and Symptoms of Meniere Disease in Acoustic Hearing.

HYPOTHESIS: The endolymphatic hydrops (EH) does not affect hearing loss significantly at low frequencies, whereas the hydrops affects the diplacusis. BACKGROUND: There have been many arguments whether the EH cause the Meniere disease. Despite a lot of experimental studies to investigate the Meniere disease, there have been little modeling studies, which are helpful to understand the mechanism. METHODS: A 3D finite element model of the human cochlea and the middle ear was used for investigation of the relationship between EH and hearing loss at low frequencies and diplacusis (2 specific symptoms of Meniere disease). While the cochlear geometry was simplified as a tapered box shape, the middle ear was based on the real geometry obtained from µCT images. EH is implemented by prestress on the basilar membrane surface in the simulation. RESULTS: The EH did not cause significant hearing loss at low frequencies in both air- and bone-conducted hearing. Rather, this disorder caused a shift in best frequency (BF) position to the base at low frequencies below about 250 Hz. The BF shift can explain the diplacusis because a low-frequency sound can be perceived as a slightly higher frequency so that Meniere patients can perceive 2 different frequency sounds corresponding to a given single-frequency sound. CONCLUSION: The EH cannot be a sufficient condition for Meniere disease, whereas the hydrops can cause the diplacusis.

Identity Recognition Based on Bioacoustics of Human Body.

Current biometrics rely on images obtained from the structural information of physiological characteristics, which is inherently a fatal problem of being vulnerable to spoofing. Here, we studied personal identification using the frequency-domain information based on human body vibration. We developed a bioacoustic frequency spectroscopy system and applied it to the fingers to obtain information on the anatomy, biomechanics, and biomaterial properties of the tissues. As a result, modulated microvibrations propagated through our body could capture a unique spectral trait of a person and the biomechanical transfer characteristics persisted for two months and resulted in 97.16% accuracy of identity authentication in 41 subjects. Ultimately, our method not only eliminates the practical means of creating fake copies of the relevant characteristics but also provides reliable features.

Mechanical Effects of Cochlear Implants on Residual Hearing Loss: A Finite Element Analysis.

The effects of cochlear implants on residual hearing loss is investigated through a finite element model of human auditory periphery consisting of the cochlea and middle ear. The simulation results show that a round window stiffness is the dominant factor in residual hearing loss. The increased round window stiffness to five times caused over 4 dB residual hearing loss at low frequencies below 500 Hz. Without considering round window ossification, inserting a cochlear implant can show at most 4 dB difference of residual hearing loss in magnitude from the no-implant case although the cochlear implant's geometry and position has been varied. If the stiffness of the round window is the same, the simulation results suggest to use a thin-straight-cochlear implant inserted into the lateral side in order to preserve residual hearing at frequencies below 700 Hz. In addition, when the distance between the basilar membrane and a cochlear implant is closer, the residual hearing loss becomes severe at high frequencies above 1 kHz. The results would be helpful for choice of a cochlear implant depending on a patient's condition.

Differential Impact of Plasma Homocysteine Levels on the Periventricular and Subcortical White Matter Hyperintensities on the Brain.

Background: The clinical significance of cerebral white matter hyperintensities (WMH) on brain magnetic resonance imaging (MRI) has recently increased, and recognized now as a risk factor for future stroke and dementia. High levels of plasma homocysteine (Hcyt) are associated with cerebral WMH. Recent studies suggest a different anatomy and physiology in the arteriolar system may be supplied to the periventricular and deep subcortical white matter. We hypothesize that plasma Hcyt levels have differing impacts on periventricular WMH (PVWMH) than on deep subcortical WMH (DSWMH). Methods: We evaluated plasma Hcyt levels from 937 neurologically healthy participants. The severity of PVWMH and DSWMH was evaluated by the use of a manual grading scale. Moderate to severe PVWMH and DSWMH levels were defined when the Fazekas score was two or three, respectively. Predominant PVWMH (pred-PVWMH) and predominant DSWMH (pred-DSWMH) were defined as having a difference of Fazekas score between PVWMH and DSWMH of two or more. Other confounding variables including age, sex, vascular risk factors, and estimated glomerular filtration rate (eGFR) were also analyzed. Results: Logistic regression revealed that, after adjusting for the confounding variables, PVWMH was associated with old age, hypertension, diabetes mellitus, low eGFR, and high plasma Hcyt levels. DSWMH was associated with old age, hypertension, and hypercholesterolemia but not with plasma Hcyt levels. Plasma Hcyt levels were associated with pred-PVWMH but not with pred-DSWMH. Conclusions: High plasma Hcyt levels are strongly associated with the development of PVWMH but not DSWMH. Our results suggest the possibility that different pathogeneses exist for PVWMH and DSWMH and that dysregulated Hcyt metabolism associated with the development of PVWMH.

Virtual Loudspeaker Effect of Graphene-Based Hybrid Material To Improve Low-Frequency Acoustic Performance.

Closed-box loudspeaker systems (CBLSSs) are compact and simple air-suspension loudspeaker systems, and their low-frequency responses are determined by two fundamental parameters: resonance frequency and total damping. Recently, electronic devices have come to require more compact designs, so the volumes of loudspeaker should be reduced. However, a small loudspeaker cannot retain sufficient acoustic space, resulting in poor low-frequency acoustic performance. Herein, we investigated acoustic characterization of the CBLSS with different filling materials such as thermally expanded graphene oxide (TEGO), activated carbon, graphene platelets, and melamine foam (MF). Upon the powder-based test, the resonance frequency of the loudspeaker decreased and resulted in a volume increasing effect inside of the loudspeaker. The TEGO shows almost double volume increase rate, compared to other particle-based filling materials. Employing hybrid filling material that consists of TEGO in an MF cage (TEGO@MF), the volume increase rate of the novel loudspeaker was over 24% at 300 cc. Because of the high adsorptive characteristics and thermal properties of TEGO, the acoustic performance in the low-frequency domain was clearly enhanced, despite the reduced mass loading. Furthermore, these properties were observed to be highly effective for enhancing the low-frequency acoustic performance of the larger loudspeaker, achieving a volume increase rate of 49.5% in a 700 cc enclosure.

Simulation of the power transmission of bone-conducted sound in a finite-element model of the human head.

Bone conduction (BC) sound is the perception of sound transmitted in the skull bones and surrounding tissues. To better understand BC sound perception and the interaction with surrounding tissues, the power transmission of BC sound is investigated in a three-dimensional finite-element model of a whole human head. BC sound transmission was simulated in the FE model and the power dissipation as well as the power flow following a mechanical vibration at the mastoid process behind the ear was analyzed. The results of the simulations show that the skull bone (comprises the cortical bone and diploë) has the highest BC power flow and thereby provide most power transmission for BC sound. The soft tissues was the second most important media for BC sound power transmission, while the least BC power transmission is through the brain and the surrounding cerebrospinal fluid (CSF) inside the cranial vault. The vibrations transmitted in the skull are mainly concentrated at the skull base when the stimulation is at the mastoid. Other vibration transmission pathways of importance are located at the occipital bone at the posterior side of the head while the transmission of sound power through the face, forehead and vertex is minor. The power flow between the skull bone and skull interior indicate that some BC power is transmitted to and from the skull interior but the transmission of sound power through the brain seem to be minimal and only local to the brain-bone interface.