Self-Powered Electrical Bandage Based on Body-Coupled Energy Harvesting.

Self-powered electrical bandages, integrated with wearable energy harvesters, could provide an effective and autonomous electrical stimulation (ES) solution for rapid and scarless wound healing. A continuously operating, wireless, and applicable-to-comprehensive-wound ES device is essential for the quick restoration of wounds and convenience. Our work illustrates a self-powered electrical bandage (SEB) powered by body-coupled energy harvesting. The SEB continuously treats the wound with 60-Hz sinusoidal electrical potential gained from the coupling of the human body and ambient electrical waves. We demonstrated enough level of electrical potential could be applied to the wound, further enhanced by strong capacitive coupling arising from the use of high-permittivity poly(vinylidene fluoride-trifluoroethylene):CaCu3Ti4O12 nanocomposite. The potential clinical efficacy of the SEB was illustrated by preclinical analysis of human fibroblasts and mouse wound model, thus confirming the successful expedition of wound recovery. This work suggests a new class of wearable devices to provide ES events and its potential for extension to other conventional wound care materials and device technology. This article is protected by copyright. All rights reserved.

Highly efficient microbial inactivation enabled by tunneling charges injected through two-dimensional electronics.

Airborne pathogens retain prolonged infectious activity once attached to the indoor environment, posing a pervasive threat to public health. Conventional air filters suffer from ineffective inactivation of the physics-separated microorganisms, and the chemical-based antimicrobial materials face challenges of poor stability/efficiency and inefficient viral inactivation. We, therefore, developed a rapid, reliable antimicrobial method against the attached indoor bacteria/viruses using a large-scale tunneling charge-motivated disinfection device fabricated by directly dispersing monolayer graphene on insulators. Free charges can be stably immobilized under the monolayer graphene through the tunneling effect. The stored charges can motivate continuous electron loss of attached microorganisms for accelerated disinfection, overcoming the diffusion limitation of chemical disinfectants. Complete (>99.99%) and broad-spectrum disinfection was achieved <1 min of attachment to the scaled-up device (25 square centimeters), reliably for 72 hours at high temperature (60°C) and humidity (90%). This method can be readily applied to high-touch surfaces in indoor environments for pathogen control.

Ajania pacifica (Nakai) K. Bremer and Humphries Extract Limits MYC Expression to Induce Apoptosis in Diffuse Large B Cell Lymphoma.

The proto-oncogene MYC is frequently dysregulated in patients with diffuse large B-cell lymphoma (DLBCL) and plays a critical role in disease progression. To improve the clinical outcomes of patients with DLBCL, the development of strategies to target MYC is crucial. The use of medicinal plants for developing anticancer drugs has garnered considerable attention owing to their diverse mechanisms of action. In this study, 100 plant extracts of flora from the Republic of Korea were screened to search for novel agents with anti-DLBCL effects. Among them, Ajania pacifica (Nakai) K. Bremer and Humphries extract (APKH) efficiently suppressed the survival of DLBCL cells, while showing minimal toxicity toward normal murine bone marrow cells. APKH suppressed the expression of anti-apoptotic BCL2 family members, causing an imbalance between the pro-apoptotic and anti-apoptotic BCL2 members. This disrupted mitochondrial membrane potential, cytochrome c release, and pro-caspase-3 activation and eventually led to DLBCL cell death. Importantly, MYC expression was markedly downregulated by APKH and ectopic expression of MYC in DLBCL cells abolished the pro-apoptotic effects of APKH. These results demonstrate that APKH exerts anti-DLBCL effects by inhibiting MYC expression. Moreover, when combined with doxorubicin, an essential component of the CHOP regimen (cyclophosphamide, doxorubicin, vincristine, and prednisone), APKH synergistically enhanced the therapeutic effect of doxorubicin. This indicates that APKH may overcome drug resistance, which is common in patients with refractory/relapsed DLBCL. To identify compounds with anti-DLBCL activities in APKH, the chemical profile analysis of APKH was performed using UPLC-QTOF/MSe analysis and assessed for its anticancer activity. Based on the UPLC-QTOF/MSe chemical profiling, it is conceivable that APKH may serve as a novel agent targeting MYC and sensitizing drug-resistant DLBCL cells to CHOP chemotherapy. Further studies to elucidate how the compounds in APKH exert tumor-suppressive role in DLBCL are warranted.

Development of an online hydrogen fuel quality analyzer with gas chromatography-pulsed discharge helium ionization detector for applying hydrogen infrastructures.

Hydrogen fuel, which is essential for the hydrogen economy, including hydrogen cell vehicles, must be of high quality for optimal hydrogen cell use. Currently, hydrogen fuel quality control is mainly done by offline analysis with periodic sampling. However, with the anticipated surge in hydrogen charging stations, there's a pressing need for cost-effective, high-throughput online analysis systems. Additionally, the miniaturization of these analytical instruments for field application is also a challenge. In this study, we present a compact, real-time hydrogen fuel analyzer based on gas chromatography with a pulsed discharge helium ionization detector. Its dual-column system efficiently analyzes major impurities in hydrogen fuel in less than 30 min. Indicator species (CO, CO2, CH4, O2, N2, and additional hydrogen sulfide [H2S]) are determined by examining hydrogen production and supply processes. The analyzer's measurement capability is consistent with µmol/mol-level analysis, providing valuable real-time information for hydrogen infrastructure managers. Additionally, it can analyze H2S, a crucial marker of sulfur compounds acting as catalytic poisons in fuel cells. This real-time analyzer offers efficient, informed decision-making support for hydrogen infrastructure managers, enhancing the overall reliability of hydrogen fuel in fuel-cell electric vehicles.

Self-Powered Water Splitting of Ni3FeN@Fe24N10 Bifunctional Catalyst Improved Catalytic Activity and Durability by Forming Fe24N10 on Catalyst Surface via the Kirkendall Effect.

Highly efficient water splitting electrocatalyst for producing hydrogen as a renewable energy source offers potential to achieve net-zero. However, it has significant challenges in using transition metal electrocatalysts as alternatives to noble metals due to their low efficiency and durability, furthermore, the reliance on electricity generation for electrocatalysts from fossil fuels leads to unavoidable carbon emissions. Here, a highly efficient self-powered water splitting system integrated is designed with triboelectric nanogenerator (TENG) and Ni3FeN@Fe24N10 catalyst with improved catalytic activity and durability. First, the durability of the Ni3FeN catalyst is improved by forming N, P carbon shell using melamine, polyetherimide, and phytic acid. The catalyst activity is improved by generating Fe24N10 in the carbon shell through the Kirkendall effect. The synthesized Ni3FeN@Fe24N10 catalyst exhibited excellent bifunctional catalytic activity (ηOER = 261.8 mV and ηHER = 151.8 mV) and remarkable stability (91.7% in OER and 90.5% in HER) in 1 m KOH. Furthermore, to achieve ecofriendly electricity generation, a rotation-mode TENG that sustainably generate high-performance is realized using butylated melamine formaldehyde. As a result, H2 is successfully generated using the integrated system composed of the designed TENG and catalyst. The finding provides a promising approach for energy generation to achieve net-zero.

Power-integrated, wireless neural recording systems on the cranium using a direct printing method for deep-brain analysis.

Conventional power-integrated wireless neural recording devices suffer from bulky, rigid batteries in head-mounted configurations, hindering the precise interpretation of the subject's natural behaviors. These power sources also pose risks of material leakage and overheating. We present the direct printing of a power-integrated wireless neural recording system that seamlessly conforms to the cranium. A quasi-solid-state Zn-ion microbattery was 3D-printed as a built-in power source geometrically synchronized to the shape of a mouse skull. Soft deep-brain neural probes, interconnections, and auxiliary electronics were also printed using liquid metals on the cranium with high resolutions. In vivo studies using mice demonstrated the reliability and biocompatibility of this wireless neural recording system, enabling the monitoring of neural activities across extensive brain regions without notable heat generation. This all-printed neural interface system revolutionizes brain research, providing bio-conformable, customizable configurations for improved data quality and naturalistic experimentation.

A 70% Ethanol Neorhodomela munita Extract Attenuates RANKL-Induced Osteoclast Activation and H2O2-Induced Osteoblast Apoptosis In Vitro.

The rapid aging of the population worldwide presents a significant social and economic challenge, particularly due to osteoporotic fractures, primarily resulting from an imbalance between osteoclast-mediated bone resorption and osteoblast-mediated bone formation. While conventional therapies offer benefits, they also present limitations and a range of adverse effects. This study explores the protective impact of Neorhodomela munita ethanol extract (EN) on osteoporosis by modulating critical pathways in osteoclastogenesis and apoptosis. Raw264.7 cells and Saos-2 cells were used for in vitro osteoclast and osteoblast models, respectively. By utilizing various in vitro methods to detect osteoclast differentiation/activation and osteoblast death, it was demonstrated that the EN's potential to inhibit RANKL induced osteoclast formation and activation by targeting the MAPKs-NFATc1/c-Fos pathway and reducing H2O2-induced cell death through the downregulation of apoptotic signals. This study highlights the potential benefits of EN for osteoporosis and suggests that EN is a promising natural alternative to traditional treatments.

Safety and efficacy of fluoroscopy-guided urethral catheterization in case of failed blind or cystoscopy-assisted urethral catheterization.

This retrospective study evaluated the safety and efficacy of fluoroscopy-guided urethral catheterization in patients who failed blind or cystoscopy-assisted urethral catheterization. We utilized our institutional database between January 2011 and March 2023, and patients with failed blind or cystoscopy-assisted urethral catheterization and subsequent fluoroscopy-guided urethral catheterization were included. A 5-Fr catheter was inserted into the urethral orifice, and the retrograde urethrography (RGU) was acquired. Subsequently, the operator attempted to pass a hydrophilic guidewire to the urethra. If the guidewire and guiding catheter could be successfully passed into the bladder, but the urethral catheter failed pass due to urethral stricture, the operator determined either attempted again with a reduced catheter diameter or performed balloon dilation according to their preference. Finally, an appropriately sized urethral catheter was selected, and an endhole was created using an 18-gauge needle. The catheter was then inserted over the wire to position the tip in the bladder lumen and ballooned to secure it. We reviewed patients' medical histories, the presence of hematuria, and RGU to determine urethral abnormalities. Procedure-related data were assessed. Study enrolled a total of 179 fluoroscopy-guided urethral catheterizations from 149 patients (all males; mean age, 73.3 ± 13.3 years). A total of 225 urethral strictures were confirmed in 141 patients, while eight patients had no strictures. Urethral rupture was confirmed in 62 patients, and hematuria occurred in 34 patients after blind or cystoscopy-assisted urethral catheterization failed. Technical and clinical success rates were 100%, and procedure-related complications were observed in four patients (2.2%). The mean time from request to urethral catheter insertion was 129.7 ± 127.8 min. The mean total fluoroscopy time was 3.5 ± 2.5 min and the mean total DAP was 25.4 ± 25.1 Gy cm2. Balloon dilation was performed in 77 patients. Total procedure time was 9.2 ± 7.6 min, and the mean procedure time without balloon dilation was 7.1 ± 5.7 min. Fluoroscopy-guided urethral catheterization is a safe and efficient alternative in patients where blind or cystoscopy-assisted urethral catheterization has failed or when cystoscopy-urethral catheterization cannot be performed.

Exploring Cardiac Exosomal RNAs of Acute Myocardial Infarction.

BACKGROUND: Myocardial infarction (MI), often a frequent symptom of coronary artery disease (CAD), is a leading cause of death and disability worldwide. Acute myocardial infarction (AMI), a major form of cardiovascular disease, necessitates a deep understanding of its complex pathophysiology to develop innovative therapeutic strategies. Exosomal RNAs (exoRNA), particularly microRNAs (miRNAs) within cardiac tissues, play a critical role in intercellular communication and pathophysiological processes of AMI. METHODS: This study aimed to delineate the exoRNA landscape, focusing especially on miRNAs in animal models using high-throughput sequencing. The approach included sequencing analysis to identify significant miRNAs in AMI, followed by validation of the functions of selected miRNAs through in vitro studies involving primary cardiomyocytes and fibroblasts. RESULTS: Numerous differentially expressed miRNAs in AMI were identified using five mice per group. The functions of 20 selected miRNAs were validated through in vitro studies with primary cardiomyocytes and fibroblasts. CONCLUSIONS: This research enhances understanding of post-AMI molecular changes in cardiac tissues and investigates the potential of exoRNAs as biomarkers or therapeutic targets. These findings offer new insights into the molecular mechanisms of AMIs, paving the way for RNA-based diagnostics and therapeutics and therapies and contributing to the advancement of cardiovascular medicine.

Comparison of radiological and functional outcomes of conservative treatment with teriparatide and denosumab in thoracolumbar osteoporotic vertebral fracture.

Teriparatide and denosumab, anti-osteoporosis medications with different mechanisms, have been widely used in the patients with osteoporotic vertebral fracture (OVF) considered as advanced osteoporosis. Teriparatide has been shown to enhance bone formation and fracture healing in OVF, but there are still no sufficient evidences discussing about the role of denosumab in newly developed OVF. In this study, we found the similar radiological deformation and functional outcomes of conservative treatment with teriparatide and denosumab in thoracolumbar (TL) OVF, and teriparatide showed a more frequent incidence of fracture union with paravertebral bone bridge formation compared to denosumab. INTRODUCTION: Teriparatide and denosumab have been widely used to treat advanced osteoporosis and prevent subsequent fractures in patients with OVCF. Unlike teriparatide, which is considered to be effective in fracture healing, there is still no clear role and evidence for the effect of denosumab in acute OVCF. This study compared the radiological and functional outcomes of conservative treatment with teriparatide and denosumab in TL-OVF. METHODS: This retrospective study enrolled 78 women with mean age of 74.69 ± 7.66 (60-92) years diagnosed as a TL-OVF with no neurological deficits. All patients were treated conservatively with teriparatide (34 of group T, once-daily 20 µg) or denosumab (44 of group D, once-6 months 60 mg) for 6 months. We evaluated the radiological deformation (kyphotic angle, segmental vertebral kyphotic angle, and compression ratio) and the incidence of fracture union with paravertebral bone bridge formation (FUPB) and functional outcomes using the visual analog scale (VAS) and Oswestry Disability Index (ODI) at 0, 3, and 6 months. RESULTS: In the radiological deformation and functional outcomes, there were no significant differences at 0, 3, and 6 months between the two groups (P > 0.05). However, the incidence of FUPB at 6 months was higher in group T (20/34, 58.8%) compared to group D (11/44, 25.0%) (P = 0.004), and teriparatide was the most statistically significant factor for achieving FUPB (OR 4.486, P = 0.012) in multivariable logistic analysis. CONCLUSIONS: Teriparatide and denosumab, despite of their different pharmacological mechanisms, showed similar radiological deformation and functional outcomes in the conservative treatment of TL-OVF. However, teriparatide showed a significantly higher incidence of fracture union with paravertebral bone bridge formation.

Changes in dementia treatment patterns associated with changes in the National Policy in South Korea among patients with newly diagnosed Alzheimer's disease between 2011 and 2017: results from the multicenter, retrospective CAPTAIN study.

BACKGROUND: The South Korean government has been actively involved in plans to combat dementia, implementing a series of national strategies and plans since 2008. In July 2014, eligibility for mandatory long-term care insurance (LTCI) was extended to people with dementia enabling access to appropriate long-term care including the cognitive function training program and home nursing service. This study aimed to investigate changes in treatment patterns for Alzheimer's disease (AD) between July 2011 and June 2017 which spanned the 2014 revision. METHODS: This multicenter, retrospective, observational study of patients with newly diagnosed AD analyzed electronic medical records from 17 general hospitals across South Korea. Based on their time of AD diagnosis, subjects were categorized into Cohort 1 (1 July 2011 to 30 June 2014) and Cohort 2 (1 July 2014 to 30 June 2017). RESULTS: Subjects (N=3,997) divided into Cohorts 1 (n=1,998) and 2 (n=1,999), were mostly female (66.4%) with a mean age of 84.4 years. Cohort 1 subjects were significantly older (P<0.0001) and had a lower number of comorbidities (P=0.002) compared with Cohort 2. Mean Mini-Mental State Examination (MMSE) scores in Cohorts 1 and 2 at the time of AD diagnosis or start of initial treatment were 16.9 and 17.1, respectively (P=0.2790). At 1 year, mean MMSE scores in Cohorts 1 and 2 increased to 17.9 and 17.4, respectively (P=0.1524). Donepezil was the most frequently administered medication overall (75.0%), with comparable rates between cohorts. Rates of medication persistence were ≥98% for acetylcholinesterase inhibitor or memantine therapy. Discontinuation and switch treatment rates were significantly lower (49.7% vs. 58.0%; P<0.0001), and mean duration of initial treatment significantly longer, in Cohort 2 vs. 1 (349.3 vs. 300.2 days; P<0.0001). CONCLUSIONS: Comparison of cohorts before and after revision of the national LTCI system for dementia patients found no significant difference in mean MMSE scores at the time of AD diagnosis or start of initial treatment. The reduction in the proportion of patients who discontinued or changed their initial treatment, and the significant increase in mean duration of treatment, were observed following revision of the LTCI policy which enabled increased patient access to long-term care.

Diagnostic and prognostic significance of preoperative evoked potential tests in degenerative cervical myelopathy.

BACKGROUND CONTEXT: Decompression surgery is a treatment option for patients with degenerative cervical myelopathy (DCM). Surgical decisions primarily depend on clinical symptoms and radiological examinations. The diagnostic and prognostic significance of evoked potential tests for surgical outcomes in patients with DCM has not been thoroughly examined. PURPOSE: To identify the diagnostic and prognostic significance of preoperative evoked potential tests in patients with DCM who underwent decompression surgery. STUDY DESIGN: This was a retrospective observational study. PATIENT SAMPLE: One hundred two consecutive patients who underwent evoked potential tests and surgical treatment between January 2016 and December 2020 in a single spine center and had a minimum follow-up of 6 months. OUTCOME MEASURES: Japanese Orthopedic Association (JOA) scores obtained preoperatively and 6 months after surgery. METHODS: This study evaluated the preoperative central motor conduction time (CMCT), somatosensory evoked potentials, and Japanese Orthopedic Association (JOA) scores obtained preoperatively and 6 months after surgery. RESULTS: Abnormal CMCT findings were observed in 94 patients (92.2%). Abnormal somatosensory evoked potentials were observed in 77 patients (75.5%). There was a statistically significant correlation between preoperative JOA score and abductor pollicis brevis (APB)-CMCT (r=-0.546, p=.001), tibialis anterior (TA)-CMCT (r=-0.517, p<.001), median nerve (MN)-SSEP (r=-0.353, p=.001), and tibial nerve (TN)-SSEP (r=-0.349, p=.003). There were significant differences in recovery rates associated with diabetes mellitus (DM), preoperative severity of myelopathy, TA-CMCT, MN-SSEP, and TN-SSEP. Stepwise multiple regression analysis showed that the major factors affecting the clinical outcomes were TN-SSEP (ß=0.327, p=.004), preoperative JOA score (ß=0.278, p=.012), and DM (ß=0.241, p=.025). CONCLUSIONS: Evoked potential testing is a functional diagnostic tool that can indicate the severity of myelopathic symptoms in patients with DCM. Additionally, preoperative TN-SSEP may have significant prognostic value in predicting postoperative clinical outcomes. Thus, preoperative evoked potential tests could be helpful for determining suitable surgical treatment candidates and forecasting postoperative prognosis.

The Effect of Intervention for Improving Colonoscopy Quality Is Associated with the Personality Traits of Endoscopists.

Background/Aims: This study investigated whether the personality traits of endoscopists are associated with the effect of interventions for the improvement of colonoscopy quality. Methods: This prospective, multicenter, single-blind study was performed with 13 endoscopists in three health screening centers over a 12-month period. Quality indicators (QIs), including adenoma detection rate (ADR), polyp detection rate (PDR), and withdrawal time, were measured every 3 months. Consecutive interventions for the improvement of colonoscopy quality were conducted every 3 months, which included the personal notification of QIs, the in-group notification of QIs, and finally a targeted "quality education" session. The personality traits of each endoscopist were evaluated for perfectionism, fear of negative evaluation, and cognitive flexibility after the last QI assessment. Results: A total of 4,095 colonoscopies were evaluated to measure the QIs of the individual endoscopists for 12 months. The mean ADR, PDR, and withdrawal time of the 13 endoscopists were 32.3%, 47.7%, and 394 seconds at baseline and increased to 39.0%, 55.1%, and 430 seconds by the end of the study (p=0.003, p=0.006, and p=0.004, respectively). Among the three interventions, only quality education significantly improved QIs: ADR, 36.0% to 39.0% (odds ratio, 1.28; 95% confidence interval, 1.01 to 1.63). The improvement of ADR and PDR by education was significantly associated with perfectionism (r=0.617, p=0.033 and r=0.635, p=0.027, respectively) and fear of negative evaluation (r=0.704, p=0.011 and r=0.761, p=0.004, respectively). Conclusions: Education can improve colonoscopy quality, and its effect size is associated with an endoscopist's personal traits such as perfectionism and fear of negative evaluation (Clinical-Trials.gov Registry NCT03796169).

High-Performing and Capacitive-Matched Triboelectric Implants Driven by Ultrasound.

In implantable bioelectronics, which aim for semipermanent use of devices, biosafe energy sources and packaging materials to protect devices are essential elements. However, research so far has been conducted in a direction where they cannot coexist. Here, the development of capacitance-matched triboelectric implants driven is reported by ultrasound under 500 mW cm-2 safe intensity and realize a battery-free, miniatured, and wireless neurostimulator with full titanium (Ti) packaging. The triboelectric implant with high dielectric composite, which has ultralow output impedance, can efficiently deliver sufficient power to generate the stimulation pulse without an energy-storing battery, despite ultrasound attenuation due to the Ti, and has the highest energy transmission efficiency among those reported so far. In vivo study using a rat model demonstrated that the proposed device system is an effective solution for relieving urinary symptoms. These achievements provide a significant step toward permanently implantable devices for controlling human organs and treating various diseases.

Boosting the Output Performance of the MoS2 Monolayer-Based Piezoelectric Nanogenerator by Artificial Dual Strain Concentration.

Piezoelectric nanogenerators (PENGs) with molybdenum disulfide (MoS2) monolayers have been intensively studied owing to their superior mechanical durability and stability. However, the limited output performance resulting from a small active area and low strain levels continues to pose a significant challenge that should be overcome. Herein, we report a novel strategy for the epoch-making output performance of a PENG with a MoS2 monolayer by adopting the additive strain concentration concept. The simulation study indicates that strain in the MoS2 monolayer can be initially augmented by the wavy structure resulting from the prestretched poly(dimethylsiloxane) (PDMS) and is further increased through flexural deformation (i.e., bending). Based on these studies, we have developed concentrated strain-applied PENGs with MoS2 monolayers. The wavy structures effectively applied strain to the MoS2 monolayer and generated a piezoelectric output voltage and current of around 580 mV and 47.5 nA, respectively. Our innovative approach to enhancing the performance of PENGs with MoS2 monolayers through the artificial dual strain concept has led to groundbreaking results, achieving the highest recorded output voltage and current for PENGs based on two-dimensional (2D) materials, which provides unique opportunities for the 2D-based energy harvesting field and structural insight into how to improve the net strain on 2D materials.

Understanding Burkholderia glumae BGR1 Virulence through the Application of Toxoflavin-Degrading Enzyme, TxeA.

Rice (Oryzae sativa cv. dongjin) is a cornerstone of global food security; however, Burkholderia glumae BGR1, which is responsible for bacterial panicle blight (BPB), threatens its productive output, with dire consequences for rice and other crops. BPB is primarily caused by toxoflavin, a potent phytotoxin that disrupts plant growth at various developmental stages. Therefore, understanding the mechanisms through which toxoflavin and BPB affect rice plants is critical. Toxoflavin biosynthesis in B. glumae BGR1 relies on the toxABCDE operon, with ToxA playing a central role. In response to this threat, our study explores a metagenome-derived toxoflavin-degrading enzyme, TxeA, as a potential defense mechanism against toxoflavin's destructive impact. TxeA-induced degradation of toxoflavin represents a potential strategy to mitigate crop damage. We introduce a groundbreaking approach: engineering transgenic rice plants to produce toxoflavin-degrading enzymes. These genetically modified plants, armed with TxeA, hold significant potential for combating toxoflavin-related crop losses. However, removal of toxoflavin, a major virulence factor in B. glumae BGR1, does not completely inhibit virulence. This innovative perspective offers a new shift from pathogen eradication to leveraging transgenic plants' power, offering a beacon of hope for crop protection and disease management. Our study offers insights into the intricate interplay between toxoflavin, BPB, and TxeA, providing a promising avenue to safeguard rice crops, ensure food security, and potentially enhance the resilience of various agricultural crops to B. glumae BGR1-induced diseases.

Genome-Wide Identification and Comprehensive Analysis of the GASA Gene Family in Peanuts (Arachis hypogaea L.) under Abiotic Stress.

Peanut (Arachis hypogaea L.) is a globally cultivated crop of significant economic and nutritional importance. The role of gibberellic-acid-stimulated Arabidopsis (GASA) family genes is well established in plant growth, development, and biotic and abiotic stress responses. However, there is a gap in understanding the function of GASA proteins in cultivated peanuts, particularly in response to abiotic stresses such as drought and salinity. Thus, we conducted comprehensive in silico analyses to identify and verify the existence of 40 GASA genes (termed AhGASA) in cultivated peanuts. Subsequently, we conducted biological experiments and performed expression analyses of selected AhGASA genes to elucidate their potential regulatory roles in response to drought and salinity. Phylogenetic analysis revealed that AhGASA genes could be categorized into four distinct subfamilies. Under normal growth conditions, selected AhGASA genes exhibited varying expressions in young peanut seedling leaves, stems, and roots tissues. Notably, our findings indicate that certain AhGASA genes were downregulated under drought stress but upregulated under salt stress. These results suggest that specific AhGASA genes are involved in the regulation of salt or drought stress. Further functional characterization of the upregulated genes under both drought and salt stress will be essential to confirm their regulatory roles in this context. Overall, our findings provide compelling evidence of the involvement of AhGASA genes in the mechanisms of stress tolerance in cultivated peanuts. This study enhances our understanding of the functions of AhGASA genes in response to abiotic stress and lays the groundwork for future investigations into the molecular characterization of AhGASA genes.

Enhanced Osteocyte Differentiation: Cathepsin D and L Secretion by Human Adipose-Derived Mesenchymal Stem Cells.

Adipose-derived mesenchymal stem cells (ASCs) have the potential to differentiate into bone, cartilage, fat, and neural cells and promote tissue regeneration and healing. It is known that they can have variable responses to hypoxic conditions. In the present study, we aimed to explore diverse changes in the cells and secretome of ASCs under a hypoxic environment over time and to present the possibility of ASCs as therapeutic agents from a different perspective. The expression differences of proteins between normoxic and hypoxic conditions (6, 12, or 24 h) were specifically investigated in human ASCs using 2-DE combined with MALDI-TOF MS analysis, and secreted proteins in ASC-derived conditioned media (ASC-derived CM) were examined by an adipokine array. In addition, genetic and/or proteomic interactions were assessed using a DAVID and miRNet functional annotation bioinformatics analysis. We found that 64 and 5 proteins were differentially expressed in hypoxic ASCs and in hypoxic ASC-derived CM, respectively. Moreover, 7 proteins among the 64 markedly changed spots in hypoxic ASCs were associated with bone-related diseases. We found that two proteins, cathepsin D (CTSD) and cathepsin L (CTSL), identified through an adipokine array independently exhibited significant efficacy in promoting osteocyte differentiation in bone-marrow-derived mesenchymal stem cells (BM-MSCs). This finding introduces a promising avenue for utilizing hypoxia-preconditioned ASC-derived CM as a potential therapeutic approach for bone-related diseases.

Identification of QTLs and allelic effect controlling lignan content in sesame (Sesamum indicum L.) using QTL-seq approach.

Sesame (Sesamum indicum L.), an oilseed crop, is gaining worldwide recognition for its healthy functional ingredients as consumption increases. The content of lignans, known for their antioxidant and anti-inflammatory effects, is a key agronomic trait that determines the industrialization of sesame. However, the study of the genetics and physiology of lignans in sesame is challenging, as they are influenced by multiple genes and environmental factors, therefore, the understanding of gene function and synthetic pathways related to lignan in sesame is still limited. To address these knowledge gaps, we conducted genetic analyses using F7 recombinant inbred line (RIL) populations derived from Goenbaek and Gomazou as low and high lignin content variants, respectively. Using the QTL-seq approach, we identified three loci, qLignan1-1, qLignan6-1, and qLignan11-1, that control lignan content, specifically sesamin and sesamolin. The allelic effect between loci was evaluated using the RIL population. qLignan6-1 had an additive effect that increased lignan content when combined with the other two loci, suggesting that it could be an important factor in gene pyramiding for the development of high-lignan varieties. This study not only highlights the value of sesame lignan, but also provides valuable insights for the development of high-lignan varieties through the use of DNA markers in breeding strategies. Overall, this research contributes to our understanding of the importance of sesame oil and facilitates progress in sesame breeding for improved lignan content.

Experimental and Numerical Study on the Perforation Behavior of an Aluminum 6061-T6 Cylindrical Shell.

The modified Johnson-Cook (MJC) material model is widely used in simulation under high-velocity impact. There was a need to estimate a strain rate parameter for the application to the impact analysis, where the method typically used is the Split Hopkinson bar. However, this method had a limit to the experiment of strain rate. This study proposed to estimate the strain rate parameter of the MJC model based on the impact energy and obtained a parameter. The proposed method of strain rate parameter calculation uses strain parameters to estimate from the drop weight impact and high-velocity impact experiments. Then, the ballistic experiment and analysis were carried out with the target of the plate and cylindrical shape. These analysis results were then compared with those obtained from the experiment. The penetration velocities of plates could be predicted with an error of a maximum of approximately 3.7%. The penetration shape of the cylindrical target has a similar result shape according to impact velocity and had an error of approximately 6%.