Elucidating Ion Transport Phenomena in Sulfide/Polymer Composite Electrolytes for Practical Solid-State Batteries.

Despite the enormous interest in inorganic/polymer composite solid-state electrolytes (CSEs) for solid-state batteries (SSBs), the underlying ion transport phenomena in CSEs have not yet been elucidated. Here, we address this issue by formulating a mechanistic understanding of bi-percolating ion channels formation and ion conduction across inorganic-polymer electrolyte interfaces in CSEs. A model CSE is composed of argyrodite-type Li6PS5Cl (LPSCl) and gel polymer electrolyte (GPE, including Li+-glyme complex as an ion-conducting medium). The percolation threshold of the LPSCl phase in the CSE strongly depends on the elasticity of the GPE phase. Additionally, manipulating the solvation/desolvation behavior of the Li+-glyme complex in the GPE facilitates ion conduction across the LPSCl-GPE interface. The resulting scalable CSE (area = 8 × 6 (cm × cm), thickness ~ 40 µm) can be assembled with a high-mass-loading LiNi0.7Co0.15Mn0.15O2 cathode (areal-mass-loading = 39 mg cm-2) and a graphite anode (negative (N)/positive (P) capacity ratio = 1.1) in order to fabricate an SSB full cell with bi-cell configuration. Under this constrained cell condition, the SSB full cell exhibits high volumetric energy density (480 Wh Lcell-1) and stable cyclability at 25 °C, far exceeding the values reported by previous CSE-based SSBs.

Exome sequencing identified five novel USH2A variants in Korean patients with retinitis pigmentosa.

BACKGROUND: Retinitis pigmentosa (RP) is an inherited disorder that causes progressive loss of vision. This study aimed to describe the possible causative variants of the USH2A gene in Korean RP families and their associated phenotypes. MATERIALS AND METHODS: We recruited 94 RP families (220 subjects, including 94 probands and 126 family members) in a Korean cohort, and analyzed USH2A gene variants through whole-exome sequencing. The pathogenicity of the variants was classified according to American College of Medical Genetics and Genomics and Association for Molecular Pathology guidelines. RESULTS: We found 14 USH2A disease-causing variants, including 5 novel variants. Disease causing variants were identified in 10 probands with RP, accounting for 10.6% (10/94) of the Korean RPs in the cohort. To visually represent the structural changes induced by novel variants, we modeled the three-dimensional structures of the wild-type and mutant proteins. CONCLUSIONS: This study expands the spectrum of USH2A variants and provides information for future therapeutic strategies for RP.

Preparation of Hexagonal SrMnO3 High-Quality Target for Magnetron Sputtering.

In recent years, the optical behavior of complex oxides are being increasingly used in light-harvesting applications. Perovskites are promising candidates for photovoltaic, photocatalytic, and optoelectric applications because of tunable band gaps and other unique properties such as fer-roelectricity To study the optical behavior of ferromagnetic-ferroelectric oxides, SrMnO3 (SMO3) targets intended for use in magnetron sputtering were prepared using SrCO3 (99.99%) and Mn2O3 (99.99%) powders by a two-step solid reaction method. Experiments were performed at various temperatures to determine the optimum calcination temperature of the SMO3 powder (1000 °C) and optimum sintering temperature of the prepared target (1300 °C), in an effort to optimize the preparation process of the target at the laboratory scale and reduce the cost of the target by more than 20-fold. Samples of the ground powder were calcined at 800, 1000, 1200, and 1300 °C for 10 h, and the resultant targets were pressed into 1 -in molds after grinding and subsequently sintered at the same temperatures at which the corresponding powders were calcined, i.e., at 800, 1000, 1200, and 1300 °Cfor 48 h. The microcrystalline state of the powders was observed by scanning electron microscopy. The prepared targets were analyzed by X-ray diffraction, and the results were compared with the powder diffraction file card of hexagonal SMO3 to determine the optimum calcination temperature and sintering temperature of the powder formulation. Finally, the Vickers hardness values of the targets were measured, and the optimum target preparation process was determined.

Transcriptome Profiling Associated with Carcass Quality of Loin Muscles in Crossbred Pigs.

Carcass quality traits, such as lean depth and loin depth, are of extreme economic importance for the swine industry. This study aimed to identify the gene expression pattern related to carcass quality in crossbred pigs ((Landrace × Yorkshire) × Duroc). In total, 20 crossbred pigs were used in this study and they were divided into two groups (class I grade, n = 10; class II grade, n = 10) based on the carcass grades. Total RNA samples extracted from the loin muscles of both groups were submitted for RNA-seq. The quality assessment of the sequencing reads resulted in 25,458 unigenes and found 12,795 candidate coding unigenes with homology to other species after annotation. Differentially expressed gene (DEG) analysis of the two groups revealed 282 up-regulated and 189 down-regulated genes (p ≤ 0.01), linked to tissue development, striated muscle tissue development, tissue morphogenesis, and lipid metabolic process gene ontology (GO) terms. Kyoto Encyclopedia of Genes and Genomes (KEGG) enrichment analysis highlighted genes related to the calcium signaling pathway, melanogenesis, the sphingolipid signaling pathway, the apelin signaling pathway, and the mTOR signaling pathway. We constructed an expressed gene profile, which may serve as a resource for genomic studies focused on uncovering the molecular mechanisms underlying carcass quality in crossbred pigs.

A first-cycle coulombic efficiency higher than 100% observed for a Li2MO3 (M = Mo or Ru) electrode.

The lithiation/de-lithiation behavior of a ternary oxide (Li2MO3, where M = Mo or Ru) is examined. In the first lithiation, the metal oxide (MO2) component in Li2MO3 is lithiated by a conversion reaction to generate nano-sized metal (M) particles and two equivalents of Li2O. As a result, one idling Li2O equivalent is generated from Li2MO3. In the de-lithiation period, three equivalents of Li2O react with M to generate MO3. The first-cycle Coulombic efficiency is theoretically 150% since the initial Li2MO3 takes four Li(+) ions and four electrons per formula unit, whereas the M component is oxidized to MO3 by releasing six Li(+) ions and six electrons. In practice, the first-cycle Coulombic efficiency is less than 150% owing to an irreversible charge consumption for electrolyte decomposition. The as-generated MO3 is lithiated/de-lithiated from the second cycle with excellent cycle performance and rate capability.