Fate of endosulfan in ginseng farm and effect of granular biochar treatment on endosulfan accumulation in ginseng.

Endosulfan was widely used as an insecticide in the agricultural sector before its environmental persistence was fully understood. Although its fate and transport in the environment have been studied, the effects of historic endosulfan residues in soil and its bioaccumulation in crops are not well understood. This knowledge gap was addressed by investigating the dissipation and bioaccumulation of endosulfan in ginseng as a perennial crop in fresh and aged endosulfan-contaminated fields. In addition, the effect of granular biochar (GBC) treatment on the bioaccumulation factor (BAF) of endosulfan residue in ginseng was assessed. The 50% dissipation time (DT50) of the total endosulfan was over 770 days in both the fresh and aged soils under mulching conditions. This was at least twofold greater than the reported (6- > 200 days) in arable soil. Among the endosulfan congeners, the main contributor to the soil residue was endosulfan sulfate, as observed from 150 days after treatment. The BAF for the 2-year-old ginseng was similar in the fresh (1.682-2.055) and aged (1.372-2.570) soils, whereas the BAF for the 3-year-old ginseng in the aged soil (1.087-1.137) was lower than that in the fresh soil (1.771-2.387). The treatment with 0.3 wt% GBC extended the DT50 of endosulfan in soil; however, this could successfully suppress endosulfan uptake, and reduced the BAFs by 66.5-67.7% in the freshly contaminated soil and 32.3-41.4% in the aged soil. Thus, this adsorbent treatment could be an effective, financially viable, and sustainable option to protect human health by reducing plant uptake of endosulfan from contaminated soils.

Role of ion-selective membranes in the carbon balance for CO2 electroreduction via gas diffusion electrode reactor designs.

In this work, the effect of ion-selective membranes on the detailed carbon balance was systematically analyzed for high-rate CO2 reduction in GDE-type flow electrolyzers. By using different ion-selective membranes, we show nearly identical catalytic selectivity for CO2 reduction, which is primarily due to a similar local reaction environment created at the cathode/electrolyte interface via the introduction of a catholyte layer. In addition, based on a systematic exploration of gases released from electrolytes and the dynamic change of electrolyte speciation, we demonstrate the explicit discrepancy in carbon balance paths for the captured CO2 at the cathode/catholyte interface via reaction with OH- when using different ion-selective membranes: (i) the captured CO2 could be transported through an anion exchange membrane in the form of CO3 2-, subsequently releasing CO2 along with O2 in the anolyte, and (ii) with a cation exchange membrane, the captured CO2 would be accumulated in the catholyte in the form of CO3 2-, while (iii) with the use of a bipolar membrane, the captured CO2 could be released at the catholyte/membrane interface in the form of gaseous CO2. The unique carbon balance path for each type of membrane is linked to ion species transported through the membranes.

Ostwald Ripening Driven Exfoliation to Ultrathin Layered Double Hydroxides Nanosheets for Enhanced Oxygen Evolution Reaction.

As a key half-reaction in water splitting, the oxygen evolution reaction (OER) process is kinetically sluggish. Layered double hydroxides (LDHs) are regarded as the highly promising electrocatalysts to promote the OER kinetics. However, the closely stacking layered structure of pristine bulk LDHs restricts the exposure of electrocatalytically active sites, and it remains a great challenge to find an efficient strategy to exfoliate the bulk LDHs into ultrathin and stable nanosheets with increased surface area and exposed active sites. Herein, a novel Ostwald ripening driven exfoliation (ORDE) of NiFe LDHs has been achieved in situ on the electrodes by spontaneously self-etching and redepositing via a simple hydrothermal treatment without the assistance of any exfoliating reagent or surfactant. The thermodynamically driven Ostwald ripening has been expanded to the exfoliation of two-dimensional layered materials for the first time. Compared with conventional exfoliation methods, this ORDE is a time-saving and green strategy that avoids the serious adsorption of surfactant molecules. The ORDE of NiFe LDHs is accomplished in situ on a Cu mesh electrode, which not only exhibits excellent electrical contact between LDHs catalyst and electrodes but also prevents the restacking of the exfoliated LDHs. As a result, the exfoliated ultrathin, clean, and vertically aligned NiFe nanosheets with much higher surface area and numerous exposed active edges and sites demonstrated significantly enhanced OER performances with low overpotential of 292 mV at 10 mA cm-2 and long-term stability for more than 60 h, as well as remarkable flexibility. Additionally, bulk Ni(OH)2 nanosheets on Ni foams have also been exfoliated by a similar mechanism, indicating this ORDE strategy can be widely extended to other 2D layered materials for novel applications.

Endophytic fungus Paecilomyces formosus LHL10 produces sester-terpenoid YW3548 and cyclic peptide that inhibit urease and α-glucosidase enzyme activities.

Endophytic fungi have been used to obtain novel bioactive secondary metabolites with potential applications in medical and agricultural sectors, which can also act as lead targets for pharmaceutical and medicinal potential. In the present study, the endophytic fungus Paecilomyces formosus LHL10 isolated from the root of cucumber plant was tested for its enzyme inhibitory potential. The ethyl acetate (EtOAc) extract of LHL10 was screened for its inhibitory effect on acetylcholinesterase (AChE), α-glucosidase, urease, and anti-lipid peroxidation. The findings suggest that the EtOAc extract from LHL10 possesses significant inhibitory potential against urease and α-glucosidase. The EtOAc extract was thus, subjected to advanced column chromatographic techniques for the isolation of pure compounds. The structure elucidation was carried out through spectroscopic analysis and comparison with literature data, and these compounds were confirmed as known a sester-terpenoid (1) and a known cyclic peptide (2). The enzyme inhibition bioassay indicated that Compounds 1 and 2 exhibited remarkable inhibitory rate against α-glucosidase and urease, with an IC50 value of 61.80 ± 5.7, 75.68 ± 6.2 and 74.25 ± 4.3, 190.5 ± 10.31 µg/g, respectively. Thus, the current study concludes the enzyme inhibitory potential of endophyte LHL10 and provides the basis for further investigations of bioactive compounds, which could be used as potent drugs for enzyme inhibition.

A Highly Versatile and Adaptable Artificial Leaf with Floatability and Planar Compact Design Applicable in Various Natural Environments.

As a promising means of solar energy conversion, photovoltaic (PV) cell-based electrolysis has recently drawn considerable attention for its effective solar fuel generation; especially the generation of hydrogen by solar water splitting. Inspired by remarkable accomplishments in enhancing the solar-to-hydrogen conversion efficiency, various efforts have aimed at fostering convenient and practical uses of PV electrolysis to make this technology ubiquitous, manageable, and efficient. Here, the design and function of a monolithic photoelectrolysis system-a so-called artificial leaf-for use in various environments are highlighted. The uniquely designed artificial-leaf system facilitates an unbiased water-splitting reaction by combining superstrate PV cells in series with single-face electrodes in a compact 2D catalytic configuration. Floatability is a new feature of the water-splitting artificial leaf; this feature maximizes solar light utilization and allows for easy retrieval for recycling. Additionally, its planar design enables operation of the device in water-scarce conditions. These characteristics endow the artificial leaf with versatility and a high adaptability to natural environments, widening the applicability of the device.

Bio-inspired dewetted surfaces based on SiC/Si interlocked structures for enhanced-underwater stability and regenerative-drag reduction capability.

Drag reduction has become a serious issue in recent years in terms of energy conservation and environmental protection. Among diverse approaches for drag reduction, superhydrophobic surfaces have been mainly researched due to their high drag reducing efficiency. However, due to limited lifetime of plastron (i.e., air pockets) on superhydrophobic surfaces in underwater, the instability of dewetted surfaces has been a sticking point for practical applications. This work presents a breakthrough in improving the underwater stability of superhydrophobic surfaces by optimizing nanoscale surface structures using SiC/Si interlocked structures. These structures have an unequaled stability of underwater superhydrophobicity and enhance drag reduction capabilities,with a lifetime of plastron over 18 days and maximum velocity reduction ratio of 56%. Furthermore, through photoelectrochemical water splitting on a hierarchical SiC/Si nanostructure surface, the limited lifetime problem of air pockets was overcome by refilling the escaping gas layer, which also provides continuous drag reduction effects.

Phoma herbarum as a new gibberellin-producing and plant growth-promoting fungus.

Endophytic fungi are known for the production of valuable metabolites, but information on the gibberellin production capacity of this group is limited. We isolated 9 endophytic fungi from the roots of salt-stressed soybean plants and screened them on waito-c rice, in order to identify plant growth promoting fungal strains. The fungal isolate TK- 2-4 gave maximum plant length (20.35 cm) promotion in comparison with wild-type Gibberella fujikuroi (19.5 cm). In a separate experiment, bioassay of TK-2-4 promoted plant length and biomass of soybean cultivar Taegwangkong. The TK-2-4 culture filtrate was analyzed for the presence of gibberellins, and it was found that all physiologically active gibberellins, especially GA(4) and GA(7), were present in higher amounts (GA(1), 0.11 ng/ml; GA(3), 2.91 ng/ml; GA(4), 3.21 ng/ml; and GA(7), 1.4 ng/ml) in conjunction with physiologically inactive GA(9) (0.05 ng/ml), GA(12) (0.23 ng/ ml), GA(15) (0.42 ng/ml), GA(19) (0.53 ng/ml), and GA(20) (0.06 ng/ml). The fungal isolate TK-2-4 was later identified as a new strain of Phoma herbarum, through the phylogenetic analysis of 28S rDNA sequence.

Burkholderia sp. KCTC 11096BP as a newly isolated gibberellin producing bacterium.

We isolated 864 bacteria from 553 soil samples and bioassayed them on cucumber and crown daisy for plant growth promotion. A new bacterial strain, Burkholderia sp. KCTC 11096BP gave maximum growth promotion and was selected for further investigations. The culture filtrate of this bacterium was thus analyzed for the presence of gibberellins and we found physiologically active gibberellins were found (GA(1), 0.23 ng/100 ml; GA(3), 5.11 ng/100 ml and GA(4), 2.65 ng/100 ml) along with physiologically inactive GA(9), GA(12), GA(15), GA(20), and GA(24). The bacterial isolate also solubilised tricalcium phosphate and lowered the pH of the medium during the process. The isolate was identified as a new strain of Burkholderia through phylogenetic analysis of 16S rDNA sequence. Gibberellin production capacity of genus Burkholderia is reported for the first time in current study.