Fabrication and Performance Evaluation of a Cation Exchange Membrane Using Graphene Oxide/Polyethersulfone Composite Nanofibers.

Ion exchange membranes, especially cation exchange membranes (CEMs), are an important component in membrane-based energy generation and storage because of their ability to transport cations via the electrochemical potential gradient while preventing electron transport. However, developing a CEM with low areal resistance, high permselectivity, and stability remains difficult. In this study, electrospun graphene oxide/polyethersulfone (GO/PES) composite nanofibers were prepared with varying concentrations of GO. To fabricate a CEM, the pores of the electrospun GO/PES nanofiber substrates were filled with a Nafion ionomer. The pore-filled PES nanofiber loaded with 1% GO revealed a noticeable improvement in hydrophilicity, structural morphology, and mechanical properties. The 1% GO/PES pore-filled CEM was compared to a Nafion membrane of a varying thickness and without a nanofiber substrate. The CEM with a nanofiber substrate showed permselectivity of 85.75%, toughness of 111 J/m3, and areal resistance of 3.7 Ω cm2, which were 12.8%, 4.3 times, and 4.0 times better, respectively, than those of the Nafion membrane at the same thickness. The development of a reinforced concrete-like GO/PES nanofiber structure containing stretchable ionomer-enhanced membrane surfaces exhibited suitable areal resistance and reduced the thickness of the composite membrane without compromising the mechanical strength, suggesting its potential application as a cation exchange membrane in electrochemical membrane-based systems.

Effects of starch sugar by-product on rumen in vitro digestibility, in situ disappearance rate, and milking productivity of the lactating dairy cow.

OBJECTIVE: The purpose of the present study was to determine the effects of starch sugar by-product (SSB) feeding on the rumen in-vitro digestibility, in situ disappearance rate, and lactating dairy cow. METHODS: To determine the rumen in vitro digestibility, 50 mL of the buffer-rumen fluid mixture was dispensed into a 125 mL serum bottle containing 0.5 g of dry matter (DM) of substrates. Nitrogen gas (N2, 99.9% pure) was flushed into the serum bottles and three replications were incubated at 0, 2, 4, 8, 16, 24, and 48 h. To determine the in-situ disappearance rate, SSB was incubated for 0, 2, 4, 8, 16, 24, and 48 hours in nylon bags (5 × 10 cm, 45*m pore size) placed within the ventral sac of two cannulated Holstein cows.. A total of sixteen Holstein Friesian cows (60.5 ± 20.4 months old, 706.8 ± 3.4 kg initial body wieght) fed experimental diets during the experimental periods. The treatments were basal diet (control) and 3.0% DM of SSB, with the diet formulated according to national research council (NRC) nutrient requirements of dairy cattle guideline. An experiment was conducted with a randomized block design for six weeks based on body weight. RESULTS: Soluble fraction (fraction a) of DM and crude protein (CP) was 28.99 and 11.92%DM, fraction b of DM and CP was 44.63 and 31.61% DM, and c value of DM and CP was 26.38 and 56.47%DM. As an increase SSB level in total mixed ration (TMR), there was a decrease in gas production at 0, 16, and 48 h (p < 0.05). As an increase SSB level in TMR, there was a decrease in acetate to propionate ratio at 8, 16, 24, and 48 h (p < 0.05). Dry matter intake, milk production, and milk composition did not differ between the treatments. All blood profile contents did not differ between treatments. CONCLUSION: A diet containing 3.0% SSB could be fed to ruminants without adverse effects on rumen fermentation.

MgB2 Superconducting Joint Architecture with the Functionality to Screen External Magnetic Fields for MRI Magnet Applications.

A superconducting joint architecture to join unreacted carbon-doped multifilament magnesium diboride (MgB2) wires with the functionality to screen external magnetic fields for magnetic resonance imaging (MRI) magnet applications is proposed. The intrinsic diamagnetic property of a superconducting MgB2 bulk was exploited to produce a magnetic field screening effect around the current transfer path within the joint. Unprecedentedly, the joint fabricated using this novel architecture was able to screen magnetic fields up to 1.5 T at 20 K and up to 2 T at 15 K and thereby almost nullified the effect of the applied magnetic field by maintaining a constant critical current (Ic). The joint showed an Ic of 30.8 A in 1.5 T at 20 K and an ultralow resistance of about 3.32 × 10-14 Ω at 20 K in a self-field. The magnetic field screening effect shown by the MgB2 joint is expected to be extremely valuable for MRI magnet applications, where the Ic of the joints is lower than the Ic of the connected MgB2 wires in a given magnetic field and temperature.

PIP/TMC Interfacial Polymerization with Electrospray: Novel Loose Nanofiltration Membrane for Dye Wastewater Treatment.

A loose nanofiltration (NF) membrane with excellent dye rejection and high permeation of inorganic salt is required to fractionate dye/salt mixture in dye wastewater treatment. In this study, we fabricated the loose NF membrane by using the electrospray interfacial polymerization (EIP) method. It is a novel and facile interfacial polymerization method, which controls the thickness of the poly(piperazine-amide) (PPA) layer in nanometers (1 nm/min) and changes cross-linking degree of PPA layer and pore size by varying the electrospray time; consequently, water permeance and dye/salt rejection ratio can be handled. The fabricated EIP membrane with an optimized fabrication condition (M30, electrospray time was 30 min) possessed excellent pure water permeance (20.2 LMH/bar), high dye rejection (e.g., 99.6% for congo red (CR)), and low salt rejection (e.g., 6.3% for NaCl). Moreover, the EIP membrane exhibited enhanced antifouling property than commercial NF membrane (NF90) with a high flux recovery rate (FRR) of 87.1% and low irreversible fouling (Rir) of 12.9% after fouled by bovine serum albumin (BSA) due to its great smooth surface (average roughness (Ra) is 12.2 nm), hydrophilicity property, enhanced zeta potential, and low protein adsorption. The results indicate that the EIP loose NF membrane had a high potential for dye wastewater treatment.

Effect of Spacer Configuration on the Characteristics of FO Membranes: Alteration of Permeation Characteristics by Membrane Deformation and Concentration Polarization.

Membrane deformation is a significant problem in osmotically driven membrane processes, as it restricts practical operating conditions and reduces overall process performance due to unfavorable alteration of membrane permeation characteristics. In this respect, a spacer plays a crucial role, as it dictates the form and extent of membrane deformation in association with concentration polarization (CP), which is also influenced by spacer-induced hydrodynamic behavior near the membrane surface. These two roles of spacers on membrane permeation characteristics are inherently inseparable with the coexistence of hydraulic and osmotic pressures. Here, we suggest a novel analytical method to differentially quantify the proportions of effective osmotic pressure drop caused by membrane deformation and CP. Furthermore, we tested two different FO membranes with three different spacer configurations to define and discuss different forms of membrane deformation and their effects on membrane permeation characteristics. The differential analysis revealed the effect of spacer configuration on effective osmotic pressure drop in membrane deformation (up to ∼201% of variation) is much greater than that in CP (up to ∼20.1% of variation). In addition, a combined configuration of a feed spacer and tricot spacer demonstrated its ability of mitigating membrane deformation with lower selectivity loss and channel pressure drop under pressurization.

Niobium-titanium (Nb-Ti) superconducting joints for persistent-mode operation.

Superconducting joints are essential for persistent-mode operation in a superconducting magnet system to produce an ultra-stable magnetic field. Herein, we report rationally designed niobium-titanium (Nb-Ti) superconducting joints and their evaluation results in detail. For practical applications, superconducting joints were fabricated by using a solder matrix replacement method with two types of lead-bismuth (Pb-Bi) solder, including Pb42Bi58 as a new composition. All the joints attained a critical current of >200 A below 1.43 T at 4.2 K. Our optimized superconducting joining method was tested in a closed-loop coil, obtaining a total circuit resistance of 3.25 × 10-14 Ω at 4.2 K in self-field. Finally, persistent-mode operation was demonstrated in an Nb-Ti solenoid coil with a persistent-current switch. This work will pave the way to developing high-performance Nb-Ti superconducting joints for practical applications.