Swath pattern analysis from a multi-rotor unmanned aerial vehicle configured for pesticide application.

BACKGROUND: Although unmanned aerial vehicles (UAVs) are increasingly used to deliver small-scale aerial pesticide applications, there remains uncertainty over their efficiency in terms of uniformity of spray deposition and their application efficiency. Consequently, a field study was designed to quantify factors influencing the uniformity of spray deposition from a multi-rotor UAV that is operated commercially in New Zealand. Two sampling systems for measuring spray deposition, a continuous horizontal string and steel plates placed on the ground were compared. RESULTS: The spray deposit distribution characteristics and calculated lane separation values (distance between flight lines that produces a maximum coefficient of variation of 30% for spray deposits) were strongly influenced by wind speed, nozzle position, release height, ground speed and droplet size. Lane separation values ranged from 1 to > 5 m. Swath distribution parameters (spread and position of peak deposition) derived from plates were not significantly different from those derived from string. However, total deposition on strings relative to plates increased with small droplets. Reducing plate sampling intensity from 0.25 m intervals to 0.5 m and even 1.0 m had only a minor effect on estimates of swath parameter values. CONCLUSIONS: The potential for precision spraying from UAV platforms has yet to be achieved with improvements required in hardware and software. Further, mechanistic models are needed to quantify how complex interactions among multiple operating and meteorological variables influence spray deposition. © 2019 Society of Chemical Industry.

Ecological impacts of long-term application of biosolids to a radiata pine plantation.

Assessment of the ecological impact of applying biosolids is important for determining both the risks and benefits. This study investigated the impact on soil physical, chemical and biological properties, tree nutrition and growth of long-term biosolids applications to a radiata pine (Pinus radiata D. Don) plantation growing on a Sandy Raw Soil in New Zealand. Biosolids were applied to the trial site every 3 years from tree age 6 to 19 years at three application rates: 0 (Control), 300 (Standard) and 600 (High) kg nitrogen (N) ha(-1), equivalent to 0, 3 and 6 Mg ha(-1) of dry biosolids, respectively. Tree nutrition status and growth have been monitored annually. Soil samples were collected 13 years after the first biosolids application to assess the soil properties and functioning. Both the Standard and High biosolids treatments significantly increased soil (0-50 cm depth) total carbon (C), N, and phosphorus (P), Olsen P and cation exchange capacity (CEC), reduced soil pH, but had no significant effects on soil (0-20 cm depth) physical properties including bulk density, total porosity and unsaturated hydraulic conductivity. The High biosolids treatment also increased concentrations of soil total cadmium (Cd), chromium (Cr), copper (Cu) and lead (Pb) at 25-50 cm depth, but these concentrations were still considered very low for a soil. Ecotoxicological assessment showed no significant adverse effects of biosolids application on either the reproduction of springtails (Folsomia candida) or substrate utilisation ability of the soil microbial community, indicating no negative ecological impact of bisolids-derived heavy metals or triclosan. This study demonstrated that repeated application of biosolids to a plantation forest on a poor sandy soil could significantly improve soil fertility, tree nutrition and pine productivity. However, the long-term fate of biosolids-derived N, P and litter-retained heavy metals needs to be further monitored in the receiving environment.

The contribution of spray formulation component variables to foliar uptake of agrichemicals.

BACKGROUND: The objective of the present study was to determine the contribution of the active ingredient (AI) and surfactant, and their concentrations, to the foliar uptake of agrichemicals, and to examine the physical properties that would need to be included in a model for foliar uptake. RESULTS: All spray formulation component variables significantly affected uptake, explaining 73% of the deviance. The deviance explained by each factor ranged from 43% (AI concentration nested within AI) to 5.6% (surfactant). The only significant interaction was between AI and surfactant, explaining 15.8% of the deviance. Overall, 90% of the deviance could be explained by the variables and their first-order interactions. CONCLUSIONS: Uptake increased with increasing lipophilicity of the AI at concentrations below those causing precipitation on the leaf surface. AI concentration had a far greater (negative) effect on the uptake of the lipophilic molecule epoxiconazole. The uptake of 2-deoxy-D-glucose (DOG) and 2,4-dichlorophenoxyacetic acid (2,4-D) increased with increasing hydrophile-lipophile balance (HLB) of the surfactant, the effect of HLB being far greater on the hydrophilic molecule DOG. However, the differences observed in epoxiconazole uptake owing to the surfactant were strongly positively related to the spread area of the formulation on the leaf surface. For all AIs, uptake increased in a similar manner with increasing molar surfactant concentration.

Predicting how altering propagule pressure changes establishment rates of biological invaders across species pools.

Biological invasions resulting from international trade can cause major environmental and economic impacts. Propagule pressure is perhaps the most important factor influencing establishment, although actual arrival rates of species are rarely recorded. Furthermore, the pool of potential invaders includes many species that vary in their arrival rate and establishment potential. Therefore, we stress that it is essential to consider the size and composition of species pools arriving from source regions when estimating probabilities of establishment and effects of pathway infestation rates. To address this, we developed a novel framework and modeling approach to enable prediction of future establishments in relation to changes in arrival rate across entire species pools. We utilized 13 828 border interception records from the United States and New Zealand for 444 true bark beetle (Scolytinae) and longhorned beetle (Cerambycidae) species detected between 1949 and 2008 as proxies for arrival rates to model the relationship between arrival and establishment rates. Nonlinearity in this relationship implies that measures intended to reduce the unintended transport of potential invaders (such as phytosanitary treatments) must be highly effective in order to substantially reduce the rate of future invasions, particularly if trade volumes continue to increase.

Effectiveness of the International Phytosanitary Standard ISPM No. 15 on reducing wood borer infestation rates in wood packaging material entering the United States.

Numerous bark- and wood-infesting insects have been introduced to new countries by international trade where some have caused severe environmental and economic damage. Wood packaging material (WPM), such as pallets, is one of the high risk pathways for the introduction of wood pests. International recognition of this risk resulted in adoption of International Standards for Phytosanitary Measures No. 15 (ISPM15) in 2002, which provides treatment standards for WPM used in international trade. ISPM15 was originally developed by members of the International Plant Protection Convention to "practically eliminate" the risk of international transport of most bark and wood pests via WPM. The United States (US) implemented ISPM15 in three phases during 2005-2006. We compared pest interception rates of WPM inspected at US ports before and after US implementation of ISPM15 using the US Department of Agriculture AQIM (Agriculture Quarantine Inspection Monitoring) database. Analyses of records from 2003-2009 indicated that WPM infestation rates declined 36-52% following ISPM15 implementation, with results varying in statistical significance depending on the selected starting parameters. Power analyses of the AQIM data indicated there was at least a 95% chance of detecting a statistically significant reduction in infestation rates if they dropped by 90% post-ISPM15, but the probability fell as the impact of ISPM15 lessened. We discuss several factors that could have reduced the apparent impact of ISPM15 on lowering WPM infestation levels, and suggest ways that ISPM15 could be improved. The paucity of international interception data impeded our ability to conduct more thorough analyses of the impact of ISPM15, and demonstrates the need for well-planned sampling programs before and after implementation of major phytosanitary policies so that their effectiveness can be assessed. We also present summary data for bark- and wood-boring insects intercepted on WPM at US ports during 1984-2008.

Economic analysis of a pine plantation receiving repeated applications of biosolids.

Treated biosolids have been applied to 750-ha of a Pinus radiata forest plantation on Rabbit Island near Nelson City in New Zealand since 1996. A long-term research trial was established in 1997 to investigate the effects of the biosolids applications on the receiving environment and tree growth. An analysis of the likely economic impact of biosolids application shows that biosolids application has been beneficial. Stem volume of the high treatment (biosolids applied at 600 kg N ha(-1) every three years) was 36% greater than the control treatment (no biosolids applied), and stem volume of the standard treatment (300 kg N ha(-1)) was 27% greater than the control treatment at age 18 years of age. Biosolids treatments have effectively transformed a low productivity forest site to a medium productivity site. Although this increased productivity has been accompanied by some negative influences on wood quality attributes with reduced wood stiffness, wood density, and larger branches, an economic analysis shows that the increased stem volume and greater average log diameter in the biosolids treatments outweighs these negative effects. The high and standard biosolids treatments are predicted to increase the net stumpage value of logs by 24% and 14% respectively at harvesting, providing a large positive impact on the forest owner's economic return.

Soil CO2 flux dynamics in the two main plantation forest types in subtropical China.

Chinese Fir and Moso bamboo are the two most important forest plantation species in subtropical China. However, information on greenhouse gas emissions from these forests is still scarce. A field study was carried out to compare soil CO(2) flux dynamics in Chinese Fir and Moso bamboo forests over a 12-month period using the LI-8100 Soil CO(2) Flux System. The soil CO(2) flux in both forest types showed similar daily and seasonal dynamic patterns with the highest soil CO(2) efflux at 14:00-16:00 in summer and the lowest in winter. Moso bamboo forest showed significant higher (P<0.01) annual mean soil CO(2) fluxes (52.9 t CO(2)ha(-1)yr(-1)) than Chinese fir forest (27.9 t CO(2)ha(-1)yr(-1)). The large difference in soil CO(2) fluxes may potentially influence the carbon cycle of the two forest types at the ecosystem scale. The CO(2) flux from the soil showed a significant positive correlation (P<0.0001) with soil temperature at 5 cm depth, a significant negative correlation (P<0.01) with air relative humidity, and no significant correlation with soil moisture in either forest types. The Q(10) value of soil respiration was higher in Chinese fir than Moso bamboo forest, indicating that soil respiration under Chinese fir forest will be more sensitive to temperature change. This study contributes to better understanding of the role Moso bamboo and Chinese fir forests may play in carbon cycle and global warming mitigation.

Improving the efficiency of lepidopteran pest detection and surveillance: constraints and opportunities for multiple-species trapping.

Surveillance using attractants for invasive species can allow early detection of new incursions and provide decision support to response programs. Simultaneous trapping for multiple species, by baiting traps with several lures, is expected to increase the number of species that can be targeted in surveillance programs and improve the cost-effectiveness without affecting surveillance coverage. We tested this hypothesis by choosing four potential forest and urban lepidopteran pest species that are present in Europe but not yet in New Zealand and many other countries. We deployed traps in central and southern Europe with single lures or all possible species combinations (up to four lures per trap). There was only limited interference, apparently due to trap saturation, but no evidence for interspecific repellency among lures for gypsy moth, Lymantria dispar, fall webworm, Hyphantria cunea, pine processionary moth, Thaumetopoea pityocampa, and pine shoot moth, Rhyacionia buoliana. To assess what factors may be important in species compatibility/suitability for multiple-species trapping, we combined our results with those of previous studies conducted by the United States Department of Agriculture. For 75 combinations of pheromones, tested singly or in combination, 19 % showed no effect on trap catch for any of the species tested. In the other cases, either one or both species showed a reduction in trap catch. However, few lure combinations caused complete or nearly complete suppression. For most combinations, catches were still sufficiently high for detection purposes. Species from the same superfamily exhibited more interference than more distantly related species. Together, these results suggest that there are opportunities to improve the range of exotic pests under surveillance, at little additional cost, by multiple-species trapping for which compatibility has been demonstrated.

Aerial application of pheromones for mating disruption of an invasive moth as a potential eradication tool.

Biological invasions can cause major ecological and economic impacts. During the early stages of invasions, eradication is desirable but tactics are lacking that are both effective and have minimal non-target effects. Mating disruption, which may meet these criteria, was initially chosen to respond to the incursion of light brown apple moth, Epiphyas postvittana (LBAM; Lepidoptera: Tortricidae), in California. The large size and limited accessibility of the infested area favored aerial application. Moth sex pheromone formulations for potential use in California or elsewhere were tested in a pine forest in New Zealand where LBAM is abundant. Formulations were applied by helicopter at a target rate of 40 g pheromone per ha. Trap catch before and after application was used to assess the efficacy and longevity of formulations, in comparison with plots treated with ground-applied pheromone dispensers and untreated control plots. Traps placed at different heights showed LBAM was abundant in the upper canopy of tall trees, which complicates control attempts. A wax formulation and polyethylene dispensers were most effective and provided trap shut-down near ground level for 10 weeks. Only the wax formulation was effective in the upper canopy. As the pheromone blend contained a behavioral antagonist for LBAM, 'false trail following' could be ruled out as a mechanism explaining trap shutdown. Therefore, 'sensory impairment' and 'masking of females' are the main modes of operation. Mating disruption enhances Allee effects which contribute to negative growth of small populations and, therefore, it is highly suitable for area-wide control and eradication of biological invaders.

Influence of sewage and pharmaceuticals on soil microbial function.

Although sewage effluent application to land is a common approach to recycle water and provide nutrients to plants, bioactive pharmaceuticals contained in sewage may change soil quality by affecting soil microbial communities. Establishing causal effects, however, is difficult, because trace levels of pharmaceuticals are confounded with other effluent constituents. Therefore, two originally similar soil microbial communities, one irrigated in situ with sewage effluent for 12 years and another nonirrigated, were exposed to high levels of acetaminophen, aspirin, carbamazepine, chlorpromazine, and tetracycline. The objectives of the current study were to determine the influence of high levels of pharmaceuticals on several soil microbial properties, the effect that prolonged effluent irrigation with ambient levels of pharmaceuticals had on soil microbial function, and how this effect would change in response to pharmaceutical exposure. Several pharmaceuticals, at high exposure levels, imposed stress on the soil microbial community as judged by increased CO(2) respiration, decreased biomass carbon, and altered substrate utilization affinities. Prolonged effluent irrigation, which altered the genetic fingerprint of the microbial community, also mitigated the response that exposure to pharmaceuticals had on the microbial community and enabled degradation of the antimicrobial salicylic acid after aspirin exposure. In conclusion, prolonged irrigation with sewage effluent containing pharmaceuticals at ambient levels influenced the microbial community so that they were able to better cope with sudden exposure to high levels of pharmaceuticals.

Seasonal variations of nitrogen and phosphorus retention in an agricultural drainage river in East China.

BACKGROUND, AIM, AND SCOPE: Riverine retention decreases loads of nitrogen (N) and phosphorus (P) in running water. It is an important process in nutrient cycling in watersheds. However, temporal riverine nutrient retention capacity varies due to changes in hydrological, ecological, and nutrient inputs into the watershed. Quantitative information of seasonal riverine N and P retention is critical for developing strategies to combat diffuse source pollution and eutrophication in riverine and coastal systems. This study examined seasonal variation of riverine total N (TN) and total P (TP) retention in the ChangLe River, an agricultural drainage river in east China. METHODS: Water quality, hydrological parameters, and hydrophyte coverage were monitored along the ChangLe River monthly during 2004-2006. Nutrient export loads (including chemical fertilizer, livestock, and domestic sources) entering the river from the catchment area were computed using an export coefficient model based on estimated nutrient sources. Riverine TN and TP retention loads (RNRL and RPRL) were estimated using mass balance calculations. Temporal variations in riverine nutrient retention were analyzed statistically. RESULTS AND DISCUSSION: Estimated annual riverine retention loads ranged from 1,538 to 2,127 t year(-1) for RNRL and from 79.4 to 90.4 t year(-1) for RPRL. Monthly retention loads varied from 6.4 to 300.8 t month(-1) for RNRL and from 1.4 to 15.3 t month(-1) for RPRL. Both RNRL and RPRL increased with river flow, water temperature, hydrophyte coverage, monthly sunshine hours, and total TN and TP inputs. Dissolved oxygen concentration and the pH level of the river water decreased with RNRL and RPRL. Riverine nutrient retention ratios (retention as a percentage of total input) were only related to hydrophyte coverage and monthly sunshine hours. Monthly variations in RNRL and RPRL were functions of TN and TP loads. CONCLUSIONS: Riverine nutrient retention capacity varied with environmental conditions. Annual RNRL and RPRL accounted for 30.3-48.3% and 52.5-71.2%, respectively, of total input TN and TP loads in the ChangLe River. Monthly riverine retention ratios were 3.5-88.7% for TN and 20.5-92.6% for TP. Hydrophyte growth and coverage on the river bed is the main cause for seasonal variation in riverine nutrient retention capacity. The total input TN and TP loads were the best indicators of RNRL and RPRL, respectively. RECOMMENDATIONS AND PERSPECTIVES: High riverine nutrient retention capacity during summer due to hydrophytic growth is favorable to the avoidance of algal bloom in both river systems and coastal water in southeast China. Policies should be developed to strictly control nutrient applications on agricultural lands. Strategies for promoting hydrophyte growth in rivers are desirable for water quality management.

Fractionation and mobility of phosphorus in a sandy forest soil amended with biosolids.

GOAL, SCOPE AND BACKGROUND: Biosolids, i.e., treated sewage sludge, are commonly used as a fertilizer and amendment to improve soil productivity. Application of biosolids to meet the nitrogen (N) requirements of crops can lead to accumulation of phosphorus (P) in soils, which may result in P loss to water bodies. Since 1996, biosolids have been applied to a Pinus radiata D. Don plantation near Nelson City, New Zealand, in an N-deficient sandy soil. To investigate sustainability of the biosolids application programme, a long-term research trial was established in 1997, and biosolids were applied every three years, at three application rates, including control (no biosolids), standard and high treatments, based on total N loading. The objective of this study was to evaluate the effect of repeated application of biosolids on P mobility in the sandy soil. MATERIALS AND METHODS: Soil samples were collected in August 2004 from the trial site at depths of 0-10, 10-25, 25-50, 50-75, and 75-100 cm. The soil samples were analysed for total P (TP), plant-available P (Olsen P and Mehlich 3 P), and various P fractions (water-soluble, bioavailable, Fe and Al-bound, Ca-bound, and residual) using a sequential P fractionation procedure. RESULTS AND DISCUSSION: Soil TP and Olsen P in the high biosolids treatment (equivalent to 600 kg N ha(-1) applied every three years) had increased significantly (P<0.05) in both 0-10 cm and 10-25 cm layers. Mehlich 3 P in soil of the high treatment had increased significantly only at 0-10 cm. Olsen P appeared to be more sensitive than Mehlich 3 P as an indicator of P movement in a soil profile. Phosphorus fractionation revealed that inorganic P (Al/Fe-bound P and Ca-bound P) and residual P were the main P pools in soil, whereas water-soluble P accounted for approximately 70% of TP in biosolids. Little organic P was found in either the soil or biosolids. Concentrations of water-soluble P, bioavailable inorganic P (NaHCO3 Pi) and potentially bioavailable inorganic P (NaOH Pi) in both 0-10 and 10-25 cm depths were significantly higher in the high biosolids treatment than in the control. Mass balance calculation indicated that most P applied with biosolids was retained by the top soil (0-25 cm). The standard biosolids treatment (equivalent to 300 kg N ha(-1) applied every three years) had no significant effect on concentrations of TP, Mehlich 3 P and Olsen P, and P fractions in soil. CONCLUSIONS: The results indicate that the soil had the capacity to retain most biosolids-derived P, and there was a minimal risk of P losses via leaching in the medium term in the sandy forest soil because of the repeated biosolids application, particularly at the standard rate. RECOMMENDATIONS AND PERSPECTIVES: Application to low-fertility forest land can be used as an environmentally friendly option for biosolids management. When biosolids are applied at a rate to meet the N requirement of the tree crop, it can take a very long time before the forest soil is saturated with P. However, when a biosolids product contains high concentrations of P and is applied at a high rate, the forest ecosystem may not have the capacity to retain all P applied with biosolids in the long term.

Biosolids-derived nitrogen mineralization and transformation in forest soils.

Utilization of biosolids through land application is becoming increasingly popular among wastewater managers. To minimize the potential contamination of receiving waters from biosolids-derived nitrogen (N), it is important to understand the availability of N after land application of biosolids. In this study, four secondary biosolids (two municipal and two pulp and paper industrial biosolids) were used in a laboratory incubation experiment to simulate N mineralization and transformation after land application. Municipal biosolids were from either aerobically or anaerobically digested sources, while pulp and paper industrial biosolids were from aerated wastewater stabilization lagoons. These biosolids were mixed with two New Zealand forest soils (top 100 mm of a volcanic soil and a brown soil) and incubated at two temperatures (10 and 20 degrees C) for 26 wk. During incubation, mineralized N was periodically leached from the soil-biosolids mixture with 0.01 M CaCl2 solution and concentrations of NH4 and NO3 in leachate were determined. Mineralization of N from aerobically digested municipal biosolids (32.1%) was significantly more than that from anaerobically digested biosolids (15.2%). Among the two pulp and paper industrial biosolids, little N leached from one, while as much as 18.0% of total organic N was leached from the other. As expected, mineralization of N was significantly greater at 20 degrees C (average 22.8%) than at 10 degrees C (average 9.7%). It was observed that more N in municipal biosolids was mineralized in the brown soil, whereas more N in pulp and paper industrial biosolids mineralized in the volcanic soil. Transformation of NH4 to NO3 was affected by soil type and temperature.