Biodegradation of waste PET: A sustainable solution for dealing with plastic pollution.

The discovery of Ideonella sakaiensis, a plastic-degrading bacterium, creates possibilities for a sustainable "bioeconomy" for recycling plastic waste.

Ring-Opening Polymerization of a New Diester Cyclic Dimer of Mandelic and Glycolic Acid: An Efficient Synthesis Method for Derivatives of Amorphous Polyglycolide with High Tg.

In this study, poly(mandelate-co-glycolate) (PMG), a modified polyglycolide (PGL), is prepared by ring-opening polymerization (ROP) of L-3-phenyl-1,4-dioxane-2,5-dione (PDD); the cyclic dimer of biobased mandelic acid and glycolic acid. The resulting polymer shows an increased glass transition temperature (Tg ) due to the incorporation of phenyl groups in the chain. High molecular weight PMG is obtained by bulk ROP at 150 °C, and it exhibits a glassy amorphous state with enhanced thermal properties such as a Tg being 35 °C higher than conventional PGL. PDD is also copolymerized with glycolide (GL) and lactide (LA), resulting in poly(mandelate-co-glycolate/glycolate) ((P(MG/GL)) with GL and poly(mandelate-co-glycolate/lactide) ((P(MG/LA)) with LA. The thermal properties of P(MG/GL) and P(MG/LA) are found to be distinctly different from PMG and conventional PGL and polylactide, and they are tunable with a changing molar ratio of PDD, GL, and LA. Therefore, PDD opens an elegant way to control and tailor the properties of biobased polyesters.

Effect of Thermoresponsive Poly(L-lactic acid)-poly(ethylene glycol) Gel Injection on Left Ventricular Remodeling in a Rat Myocardial Infarction Model.

Some gel types have been reported to prevent left ventricular (LV) remodeling in myocardial infarction (MI) animal models. In this study, we tested biodegradable thermoresponsive gels. Poly(L-lactic acid)-poly(ethylene glycol) (PLLA-PEG) and poly(D-lactic acid)-poly(ethylene glycol) (PDLA-PEG) were synthesized by the polycondensation of l- and D-lactic acids in the presence of PEG and succinic acid. Each of these block copolymers was used to prepare particles dispersed in an aqueous medium and mixed together to obtain a PLLA-PEG/PDLA-PEG suspension, which was found to show a sol-to-gel transition around the body temperature by the stereocomplex formation of enantiomeric PLLA and PDLA sequences. In the present study, the G' of the PLLA-PEG/PDLA-PEG suspension in the rheological measurement remained as low as 1 Pa at 20 °C and increased 2 kPa at 37 °C. The sol-gel systems of PLLA-PEG/PDLA-PEG might be applicable to gel therapy. The effect of the PLLA-PEG/PDLA-PEG gel injection was compared with that of a calcium-crosslinked alginate gel and saline in a rat MI model. The percent fractional shortening improved in the PLLA-PEG/PDLA-PEG (20.8 ± 4.1%) and alginate gel (21.1 ± 4.8%) compared with the saline (14.2 ± 2.8%) with regard to the echocardiograph 4 weeks after the injection (p < 0.05). There were reduced infarct sizes in both PLLA-PEG/PDLA-PEG gel and alginate gel compared with the saline injection (p < 0.05). Moreover, a greater reduction in LV cavity area was observed with the PLLA-PEG/PDLA-PEG gel than with the alginate gel (p = 0.06). These results suggest that the PLLA-PEG/PDLA-PEG gel should have high therapeutic potential in gel therapy for LV remodeling after MI.

Vascular induction and cell infiltration into peptide-modified bioactive silk fibroin hydrogels.

In hydrogel-based soft tissue engineering, vascular induction into a hydrogel as well as long-term volume retention is essential to maintain tissue shape and function without causing necrosis in the deeper part of the hydrogel. A silk fibroin (SF) hydrogel shows a sufficiently high mechanical strength to maintain its shape during implantation for a month, but it has not been well evaluated whether it has vascular-inducing bioactivity to achieve its replacement by vascularized tissues. Here, we produced a vascular-inducing peptide (VIP) containing an endothelial cell (EC)-adhesive REDV and vascular endothelial growth factor-mimicking QK peptides to modify the SF hydrogel. In vitro experiments showed that the modification of the SF hydrogel with VIP changed only biological properties of the hydrogel due to the bioactivity of VIP. Subcutaneous implantation of SF hydrogels in rats revealed isotropic EC migration into the hydrogels, which was followed by infiltration of macrophages and fibroblasts. Since these macrophages and fibroblasts appeared to degrade the SF network and to produce collagen, respectively, SF hydrogels were replaced gradually by regenerated tissues. VIP accelerated cell infiltration and doubled the formation of blood vessels in the regenerated tissue. These results suggest the potential of the VIP-modified SF hydrogel as a material for soft tissue engineering applications.

Response to Comment on "A bacterium that degrades and assimilates poly(ethylene terephthalate)".

Yang et al suggest that the use of low-crystallinity poly(ethylene terephthalate) (PET) exaggerates our results. However, the primary focus of our study was identifying an organism capable of the biological degradation and assimilation of PET, regardless of its crystallinity. We provide additional PET depolymerization data that further support several other lines of data showing PET assimilation by growing cells of Ideonella sakaiensis.

A bacterium that degrades and assimilates poly(ethylene terephthalate).

Poly(ethylene terephthalate) (PET) is used extensively worldwide in plastic products, and its accumulation in the environment has become a global concern. Because the ability to enzymatically degrade PET has been thought to be limited to a few fungal species, biodegradation is not yet a viable remediation or recycling strategy. By screening natural microbial communities exposed to PET in the environment, we isolated a novel bacterium, Ideonella sakaiensis 201-F6, that is able to use PET as its major energy and carbon source. When grown on PET, this strain produces two enzymes capable of hydrolyzing PET and the reaction intermediate, mono(2-hydroxyethyl) terephthalic acid. Both enzymes are required to enzymatically convert PET efficiently into its two environmentally benign monomers, terephthalic acid and ethylene glycol.

Tissue-engineered acellular small diameter long-bypass grafts with neointima-inducing activity.

Researchers have attempted to develop efficient antithrombogenic surfaces, and yet small-caliber artificial vascular grafts are still unavailable. Here, we demonstrate the excellent patency of tissue-engineered small-caliber long-bypass grafts measuring 20-30 cm in length and having a 2-mm inner diameter. The inner surface of an acellular ostrich carotid artery was modified with a novel heterobifunctional peptide composed of a collagen-binding region and the integrin α4ß1 ligand, REDV. Six grafts were transplanted in the femoral-femoral artery crossover bypass method. Animals were observed for 20 days and received no anticoagulant medication. No thrombogenesis was observed on the luminal surface and five cases were patent. In contrast, all unmodified grafts became occluded, and severe thrombosis was observed. The vascular grafts reported here are the first successful demonstrations of short-term patency at clinically applicable sizes.

Nano-ordered surface morphologies by stereocomplexation of the enantiomeric polylactide chains: specific interactions of surface-immobilized poly(D-lactide) and poly(ethylene glycol)-poly(L-lactide) block copolymers.

Both AB diblock and ABA triblock copolymers consisting of poly(L-lactide) (PLLA: A) and poly(ethylene glycol) (PEG: B) were deposited on a silicon surface on which poly(D-lactide) (PDLA) had been preimmobilized. The deposit of the diblock copolymer (PLLA-PEG) formed band structures similar to those observed when the same copolymer was directly deposited on the silicon surface. In contrast, the deposit of the triblock copolymer (PLLA-PEG-PLLA) formed many particulates scattering over the surface. When the PLLA-PEG deposit was subjected to water-soaking, the original band morphology was completely replaced by the particulate morphology that was identical to that of the PLLA-PEG-PLLA deposit. Their FT-IR analyses revealed that both copolymers had been bound through the stereocomplex (sc) formation between the preimmobilized PDLA chains and the PLLA blocks of the copolymers. Grazing-incidence small-angle X-ray scattering (GISAXS) also supported these surface morphologies. It was therefore evident that hydrophilic PEG chains can be immobilized on the PDLA-preimmobilized surface by the sc formation.

Protecting-Group-Free Synthesis of Glycopolymers Bearing Sialyloligosaccharide and Their High Binding with the Influenza Virus.

Glycopolymers having pendant triazole-linked sialyloligosaccharides were successfully synthesized from free saccharides without any protection of the hydroxy and carboxy groups on the saccharides. The glycomonomers were synthesized by the direct azidation of free saccharides using 2-chloro-1,3-dimethylimidazolinium chloride as a condensing agent followed by copper(I)-catalyzed azide-alkyne cycloaddition. The resultant glycomonomers were copolymerized with acrylamide by a reversible addition-fragmentation chain transfer technique. Each of the glycopolymers were obtained and then immobilized on a gold-coated sensor of quartz crystal microbalance to analyze their binding behavior with the lectin. The glycopolymers strongly bound with the corresponding lectin without nonspecific adsorption in aqueous solution. In addition, the glycopolymer bearing a complex-type sialyl N-linked oligosaccharide was found to strongly bind with both human and avian influenza A viruses. The strong binding, observed using the hemagglutination inhibition assay, was attributed to the glycocluster effect of the glycopolymer and the biantennary structure of the N-linked oligosaccharide.

Synthesis of ABCBA penta stereoblock polylactide copolymers by two-step ring-opening polymerization of L- and D-lactides with poly(3-methyl-1,5-pentylene succinate) as macroinitiator (C): development of flexible stereocomplexed polylactide materials.

BCB triblock copolymers consisting of poly-L-lactide (PLLA: B) and poly(3-methy-1,5-pentylene succinate) (SA/MPD: C) were first synthesized by ring-opening polymerization (ROP) of L-lactide by using a dihydroxyl-terminated SA/MPD (Mn≈20k) and tin octoate as the macroinitiator and catalyst, respectively. The telechelic dihydroxyl-terminated SA/MPD was readily synthesized by the controlled melt-polycondensation of succinic acid and 3-methyl-1,5-pentandiol (MPD). The resultant triblock copolymers, dihydroxyl-terminated, were subsequently utilized as the macroinitiators in the second-step ROP of D-lactide to obtain ABCBA penta-block copolymers (penta-sb-PLA) consisting of poly-D-lactide (PDLA), PLLA, and SA/MPD as the A, B, and C blocks, respectively. The weight-average molecular weights of the resultant penta-sb-PLAs became higher than 150 kDa. The cast films of these penta-sb-PLAs exhibited flexible nature due to the presence of the SA/MPD soft block as well as excellent heat-stability owing to the easy stereocomplex formation of the neighboring enantiomeric PLLA and PDLA blocks.

Synthesis of silyl-terminated polylactides for controlled surface immobilization of polylactide macromolecular chains.

Poly(D-lactide)s (PDLA) having an end group of trimethoxysilyl (P(x)-Si-(OMe)(3)) or monoethoxydimethylsilyl (P(x)-Si-OEt) group were synthesized to immobilize macromolecular chains of polylactide onto a flat silicon surface by the "grafting onto" mechanism. Both the end-functional PDLAs were efficiently immobilized on the flat surface of silicon wafers to create different nano-ordered structures. The P(x)-Si-OEt having the monofunctional siloxyl group formed a homogeneous dot morphology consisting of homogeneously dispersed particles of 20-30 nm in diameter while the P(x)-Si-(OMe)(3) having the trifunctional siloxyl group formed a heterogeneous morphology consisting of both spots and fibrous strands. The former homogeneous morphology was attributed to the lack of the intermolecular cross-linking reaction that was evident in P(x)-Si-(OMe)(3).

Highly efficient reinforcement of poly-L-lactide materials by polymer blending of a thermotropic liquid crystalline polymer.

A novel polymer blend system consisting of poly(l-lactide) (PLLA) and a thermotropic liquid crystalline polymer (LCP: an aromatic polyester comprising poly(4-hydroxybenzoate) sequences) was investigated in the presence and absence of a polycabodiimide (PCD). Scanning electron micrographs of the injection-molded polymer blends revealed the formation of fibrous structure of LCP in the PLLA matrix, supporting the efficient toughening. In particular, the LCP fibrils became semimicrometer in diameter in the presence of PCD with which both PLLA and LCP had reacted during the melt blending to form their block and graft copolymers working as compatibilizer. The blend specimens containing LCP in 20-30 wt % were found to hold high dynamic storage-moduli (E') at high temperature. In addition, the E' value of the specimens containing 30 wt % of LCP reached 10.7 GPa at room temperature, being significantly higher than that of PLLA.

Enhanced stereocomplex formation of poly(L-lactic acid) and poly(D-lactic acid) in the presence of stereoblock poly(lactic acid).

Stereoblock poly(lactic acid) (sb-PLA) is incorporated into a 1:1 polymer blend system of poly(L-lactic acid) (PLLA) and poly(D-lactic acid) (PDLA) that has a high molecular weight to study its addition effect on the stereocomplex (sc) formation of PLLA and PDLA. The ternary polymer blend films are first prepared by casting polymer solutions of sb-PLA, PLLA, and PDLA with different compositions. Upon increasing the content of sb-PLA in the blend films the sc crystallization is driven to a higher degree, while the formation of homo-chiral (hc) crystals is decreased. Lowering the molecular weight of the incorporated sb-PLA effectively increases the sc formation. Consequently, it is revealed that sb-PLA can work as a compatibilizer to improve the poor sc formation in the polymer blend of PLLA and PDLA.

Layer-by-Layer crystallization of enantiomeric poly(lactide)s.

Poly(lactide)s stereocomplex ultrathin film with controlled structure at a molecular level was able to be prepared by stepwise assembly using the stereocomplex interaction. Pure stereocomplex crystal can be easily obtained by using this technique. When the substrates pre-coated with the stereocomplex assembly were immersed into solution of poly(L-lactide) or poly(D-lactide) for a long time, each polymer was homogeneously deposited on the substrates. The enantiomer was epitaxially crystallized on the stereocomplex film. The XRD pattern of the films showed similar characteristic peaks of the stereocomplex, indicating that the crystallization was influenced by conformation of polymer at the substrate. This is the first case of the epitaxially growth of polymers on the structurally regulated surface. These films had high degree of crystallinity although the assemblies did not undergo a crystallization process. This method was considered to be a general method that can be applied to other polymers, which able to form stereocomplex.

Preparation and properties of ProNectin F-coated biodegradable hollow fibers.

ProNectin F-coated biodegradable hollow fibers were newly prepared and their cytocompatibility was evaluated in vitro. Although the coating efficiency onto poly(L-lactic acid) (PLLA) and poly(lactide-co-caprolactone) [p(LA/CL)] matrices was similar, the cell adhesion properties were greatly affected by the nature of the polymer substrate. ProNectin F-coated PLLA showed about seven times higher cytocompatibility than ProNectin F-coated p(LA/CL). The single-extruded melt spinning method and the core-sheath bicomponent melt spinning method were employed to prepare PLLA hollow fibers. The effect of the spinning conditions, such as the melt draw ratio, spinneret temperature, and take-up speed, on the diameter and wall thickness of the spun fibers was studied in detail. For single-extruded melt spinning, a segmented type of spinneret was used, and the effect of the flow rate of nitrogen, which was confined in the hollow part of fibers, was studied. X-ray photographs of the drawn hollow fibers, clarified the significant molecular orientation, which was much higher than that in drawn solid PLLA fiber under identical drawing conditions. The morphology and mechanical properties of hollow fibers demonstrated an increase in the tensile strength and a decrease in the thickness of the PLLA wall with increased nitrogen flow rates and melt draw ratios for single-extruded melt spinning. These results indicate the unique characteristics of ProNectin F-coated PLLA hollow fibers, which can be successfully utilized as a biodegradable substrate.

Stereoblock poly(lactic acid): synthesis via solid-state polycondensation of a stereocomplexed mixture of poly(L-lactic acid) and poly(D-lactic acid).

Stereoblock poly(lactic acid) consisting of D- and L-lactate stereosequences can be successfully synthesized by solid-state polycondensation of a 1:1 mixture of poly(L-lactic acid) and poly(D-lactic acid). In the first step, melt-polycondensation of L- and D-lactic acids is conducted to synthesize poly(L-lactic acid) and poly(D-lactic acid) with a medium-molecular-weight, respectively. In the next step, these poly(L-lactic acid) and poly(D-lactic acid) are melt-blended in 1:1 ratio to allow formation of their stereocomplex. In the last step, this melt-blend is subjected to solid-state polycondensation at temperature where the dehydrative condensation is allowed to promote chain extension in the amorphous phase with the stereocomplex crystals preserved. Finally, stereoblock poly(lactic acid) having high-molecular-weight is obtained. The stereoblock poly(lactic acid) synthesized by this way shows a higher melting temperature in consequence of the controlled block lengths and the resulting higher-molecular-weight. The product characterization as well as the optimization of the polymerization conditions is described. Changes in M(w) of stereoblock poly(lactic acid) (sb-PLA) as a function of the reaction time.

Production of D-lactic acid by bacterial fermentation of rice starch.

D-Lactic acid was synthesized by the fermentation of rice starch using microorganisms. Two species: Lactobacillus delbrueckii and Sporolactobacillus inulinus were found to be active in producing D-lactic acid of high optical purity after an intensive screening test for D-lactic acid bacteria using glucose as substrate. Rice powder used as the starch source was hydrolyzed with a combination of enzymes: alpha-amylase, beta-amylase, and pullulanase to obtain rice saccharificate consisting of maltose as the main component. Its average gross yield was 82.5%. Of the discovered D-lactic acid bacteria, only Lactobacillus delbrueckii could ferment both maltose and the rice saccharificate. After optimizing the fermentation of the rice saccharificate using this bacterium, pilot scale fermentation was conducted to convert the rice saccharificate into D-lactic acid with a D-content higher than 97.5% in a yield of 70%. With this yield, the total yield of D-lactic acid from brown rice was estimated to be 47%, which is almost equal to the L-lactic acid yield from corn. The efficient synthesis of D-lactic acid can open a way to the large scale application of high-melting poly(lactic acid) that is a stereocomplex of poly(L-lactide) and poly(D-lactide). Schematic representation of the production of D-lactic acid starting from brown rice as described here.

Hydrogel formation between enantiomeric B-A-B-type block copolymers of polylactides (PLLA or PDLA: A) and polyoxyethylene (PEG: B); PEG-PLLA-PEG and PEG-PDLA-PEG.

A mixed suspension of the enantiomeric B-A-B triblock copolymers, polyoxyethylene-block-poly(L-lactide)-block-polyoxyethylene (PEG-PLLA-PEG) and polyoxyethylene-block-poly(D-lactide)-block-polyoxyethylene (PEG-PDLA-PEG), was found to induce reversible gel-to-sol transition depending on the polymer concentration and temperature. The storage and loss moduli of the gel formed at lower temperature were much higher than those of the gel prepared from the corresponding ABA-type triblock copolymers because of the higher polymer concentration in the former. Although the stereo-complexation of the PLLA and PDLA blocks occurred at higher temperature also in the B-A-B copolymers, it was not responsible for the gelation of the mixed suspension. The PEG chains, involved in the helix formation of the PLLA and PDLA, should form helices with opposite helical senses to aggregate and lead the gelation of the system.