Active microwave pulse compressor using an electron-beam triggered switch.

A high-power active microwave pulse compressor is described that operates by modulating the quality factor of an energy storage cavity by means of mode conversion controlled by a triggered electron-beam discharge across a switch cavity. This Letter describes the principle of operation, the design of the switch cavity, the configuration used for the tests, and the experimental results. The pulse compressor produced output pulses with 140-165 MW peak power, record peak power gains of 16∶1-20∶1, and FWHM pulse duration of 16-20 ns at a frequency of 11.43 GHz.

Observation of multipactor in an alumina-based dielectric-loaded accelerating structure.

We report a new regime of single-surface multipactor that was observed during high-power testing of an 11.424-GHz alumina-based dielectric-loaded accelerating structure. Previous experimental observations of single-surface multipactor on a dielectric occurred in cases for which the rf electric field was tangential and the rf power flow was normal to the dielectric surface (such as on rf windows) and found that the fraction of power absorbed at saturation is approximately 1%, independent of the incident power. In this new regime, in which strong normal and tangential rf electric fields are present and the power flow is parallel to the surface, the fraction of power absorbed at saturation is an increasing function of the incident power, and more than half of the incident power can be absorbed. A simple model is presented to explain the experimental results.