Simultaneous Electrochemical Exfoliation and Functionalization of 2H-MoS2 for Supercapacitor Electrodes.

MoS2 is a promising semiconducting material that has been widely studied for applications in catalysis and energy storage. The covalent chemical functionalization of MoS2 can be used to tune the optoelectronic and chemical properties of MoS2 for different applications. However, 2H-MoS2 is typically chemically inert and difficult to functionalize directly and thus requires pretreatments such as a phase transition to 1T-MoS2 or argon plasma bombardment to introduce reactive defects. Apart from being inefficient and inconvenient, these methods can cause degradation of the desirable properties and introduce unwanted defects. Here, we demonstrate that 2H-MoS2 can be simultaneously electrochemically exfoliated and chemically functionalized in a facile and scalable procedure to fabricate functionalized thin (∼4 nm) MoS2 layers. The aryl diazonium salts used for functionalization have not only been successfully covalently grafted onto the 2H-MoS2, as verified by X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy, but also aid the exfoliation process by increasing the interlayer spacing and preventing restacking. Electrochemical energy storage is one application area to which this material is particularly suited, and characterization of supercapacitor electrodes using this exfoliated and functionalized material revealed that the specific capacitance was increased by ∼25% when functionalized. The methodology demonstrated for the simultaneous production and functionalization of two-dimensional (2D) materials is significant, as it allows for control over the flake morphology with increased repeatability. This electrochemical functionalization technique could also be extended to other types of transition-metal dichalcogenides (TMDs), which are also typically chemically inert with different functional species to adjust to specific applications.

Tribology of Copper Metal Matrix Composites Reinforced with Fluorinated Graphene Oxide Nanosheets: Implications for Solid Lubricants in Mechanical Switches.

The potential for the use of copper coatings on steel switching mechanisms is abundant owing to the high conductivities and corrosion resistance that they impart on the engineered assemblies. However, applications of these coatings on such moving parts are limited due to their poor tribological properties; tendencies to generate high friction and susceptibility to degradative wear. In this study, we have fabricated a fluorinated graphene oxide-copper metal matrix composite (FGO-CMMC) on an AISI 52100 bearing steel substrate by a simple electrodeposition process in water. The FGO-CMMC coatings exhibited excellent lubrication performance under pin-on-disk (PoD) tribological sliding at 1N load, which reduced CoF by 63 and 69%, compared to the GO-CMMC and pure copper coatings that were also prepared. Furthermore, FGO-CMMC achieved low friction and low wear at higher sliding loads. The lubrication enhancement of the FGO-CMMCs is attributed to the tribochemical reaction of FGO with the AISI 52100 steel counterface initiated by the sliding load. The formation of an asymmetric tribofilm structure on the sliding track is critical; the performance of the FGO/Cu tribofilm formed in the track is boosted by the continued fluorination of the counterface surface during PoD sliding, passivating the tribosystem from adhesion-driven breakdown. The FGO-CMMC and GO-CMMC coatings also provide increased corrosion protection reaching 94.2 and 91.6% compared to the bare steel substrate, allowing for the preservation of the long-term low-friction performance of the coating. Other influences include the improved interlaminar shear strength of the FGO-containing composite. The excellent lubrication performance of the copper matrix composite coatings facilitated by FGO incorporation makes it a promising solid lubricant candidate for use in mechanical engineering applications.

Production of Graphene/Inorganic Matrix Composites through the Sintering of Graphene Oxide Flakes Decorated with CuWO4·2H2O Nanoparticles.

There is growing interest in graphene-reinforced inorganic matrix composites, but progress in this field is far behind that of polymer matrices due to difficulties in the processing of carbon materials in aggressive sintering environments, including oxidation and solubility in the host matrix. Copper-tungsten matrices are of particular interest in the power switching field but are difficult to produce due to the mutual insolubility of metals and poor wetting. Herein, composites were produced by decorating graphene oxide flakes with 8 nm diameter CuWO4·2H2O nanoparticles and then sintering them to form the final shape. The oxide nanoparticles were found to self-assemble into platelets on the surfaces of graphene flakes. Upon sintering, the presence of graphene was found to change the grain morphology from elongated needles to a polyhedral shape. It was found that, despite the nanosize of the CuWO4·2H2O particles used, the sintering conditions did not reduce the matrix to a pure metal; the sintered composites were found to be of mixed phase with copper tungstate and copper oxide present. Raman spectroscopy indicated that the graphene oxide became hydrogenated during the sintering process as a result of the reducing hydrogen atmosphere used.

Controlling the Thermoelectric Behavior of La-Doped SrTiO3 through Processing and Addition of Graphene Oxide.

The addition of graphene has been reported as a potential route to enhance the thermoelectric performance of SrTiO3. However, the interplay between processing parameters and graphene addition complicates understanding this enhancement. Herein, we examine the effects of processing parameters and graphene addition on the thermoelectric performance of La-doped SrTiO3 (LSTO). Briefly, two types of graphene oxide (GO) at different oxidation degrees were used, while the LSTO pellets were densified under two conditions with different reducing strengths (with/without using oxygen-scavenging carbon powder bed muffling). Raman imaging of the LSTO green body and sintered pellets suggests that the added GO sacrificially reacts with the lattice oxygen, which creates more oxygen vacancies and improves electrical conductivity regardless of the processing conditions. The addition of mildly oxidized electrochemical GO (EGO) yields better performance than the conventional heavily oxidized chemical GO (CGO). Moreover, we found that muffling the green body with an oxygen-scavenging carbon powder bed during sintering is vital to achieving a single-crystal-like temperature dependence of electrical conductivity, implying that a highly reducing environment is critical for eliminating the grain boundary barriers. Combining 1.0 wt % EGO addition with a highly reducing environment leads to the highest electrical conductivity of 2395 S cm-1 and power factor of 2525µW m-1 K-2 at 300 K, with an improved average zT value across the operating temperature range of 300-867 K. STEM-EELS maps of the optimized sample show a pronounced depletion of Sr and evident deficiency of O and La at the grain boundary region. Theoretical modeling using a two-phase model implies that the addition of GO can effectively improve carrier mobility in the grain boundary phase. This work provides guidance for the development of high-performance thermoelectric ceramic oxides.

Mechanical and Electrical Properties of Graphene Oxide Reinforced Copper-Tungsten Composites Produced via Ball Milling of Metal Flakes.

Copper-tungsten (Cu-W) composites are widely used in high-power and -temperature electrical applications. The combination of these metals, however, leads to compromised physical and electrical properties. Herein, we produce Cu-W-graphene oxide (Cu-W-GO) composites to address this challenge. To ensure uniform density composites, the as-received metal powders were flattened into a flake morphology by ball milling and then mixed with up to 0.5 wt.% GO flakes. The green forms were processed using spark plasma sintering. The GO was found to be well-dispersed amongst the metallic phases in the final composite. The addition of GO reduced the relative density of the composites slightly (4.7% decrease in relative density at 0.5 wt% GO loading for the composites processed at 1000 °C). X-ray diffraction confirmed good phase purity and that no carbide phases were produced. GO was found to improve the mechanical properties of the Cu-W, with an optimal loading of 0.1 wt.% GO found for ultimate compression strength and strain to failure, and 0.3 wt.% optimal loading for the 0.2% offset yield strength. Significantly, the electrical conductivity increased by up to 25% with the addition of 0.1 wt.% GO but decreased with higher GO loadings.

Deformation of and Interfacial Stress Transfer in Ti3C2 MXene-Polymer Composites.

Transitional metal carbides and nitrides (MXenes) have promise for incorporation into multifunctional composites due to their high electrical conductivity and excellent mechanical and tribological properties. It is unclear, however, to what extent MXenes are also able to improve the mechanical properties of the composites and, if so, what would be the optimal flake size and morphology. Herein, Ti3C2Tx MXene is demonstrated to be indeed a good candidate for mechanical reinforcement in polymer matrices. In the present work, the strain-induced Raman band shifts of mono-/few-/multilayer MXenes flakes have been used to study the mechanical properties of MXene and the interlayer/interfacial stress transfer on a polymer substrate. The mechanical performance of MXene was found to be less dependent upon flake thickness compared to that of graphene. This enables Ti3C2Tx MXene to offer an efficient mechanical reinforcement to a polymer matrix with a flake length of >10 µm and a thickness of 10s of nanometers. Therefore, the degree of exfoliation of MXenes is not as demanding as other two-dimensional (2D) materials for the purpose of mechanical enhancement in polymers. In addition, the active surface chemistry of MXene facilitates possible functionalization to enable a stronger interface with polymers for applications, such as strain engineering and mechanical enhancement, and in materials including membranes, coatings, and textiles.

Modulation of Charge Transport at Grain Boundaries in SrTiO3: Toward a High Thermoelectric Power Factor at Room Temperature.

Modulation of the grain boundary properties in thermoelectric materials that have thermally activated electrical conductivity is crucial in order to achieve high performance at low temperatures. In this work, we show directly that the modulation of the potential barrier at the grain boundaries in perovskite SrTiO3 changes the low-temperature dependency of the bulk material's electrical conductivity. By sintering samples in a reducing environment of increasing strength, we produced La0.08Sr0.9TiO3 (LSTO) ceramics that gradually change their electrical conductivity behavior from thermally activated to single-crystal-like, with only minor variations in the Seebeck coefficient. Imaging of the surface potential by Kelvin probe force microscopy found lower potential barriers at the grain boundaries in the LSTO samples that had been processed in the more reducing environments. A theoretical model using the band offset at the grain boundary to represent the potential barrier agreed well with the measured grain boundary potential dependency of conductivity. The present work showed an order of magnitude enhancement in electrical conductivity (from 85 to 1287 S cm-1) and power factor (from 143 to 1745 µW m-1 K-2) at 330 K by this modulation of charge transport at grain boundaries. This significant reduction in the impact of grain boundaries on charge transport in SrTiO3 provides an opportunity to achieve the ultimate "phonon glass electron crystal" by appropriate experimental design and processing.

Ice-templated hybrid graphene oxide-graphene nanoplatelet lamellar architectures: tuning mechanical and electrical properties.

The traditional freeze-casting route for processing graphene-based aerogels is generally restricted to aqueously dispersed flakes of graphene oxide (GO) and post-processing reduction treatments, which brings restrictions to the aerogels electrical properties. In this work, we report a versatile aqueous processing route that uses the ability of GO todisperse graphene nanoplatelets (GNP) to produce rGO-GNP lamellar aerogels via unidirectional freeze-casting. In order to optimise the properties of the aerogel, GO-GNP dispersions were partially reduced by L-ascorbic acid prior to freeze-casting to tune the carbon and oxygen (C/O) ratio. The aerogels were then heat treated after casting to fully reduce the GO. The chemical reduction time was found to control the microstructure of the resulting aeorgels and thus to tune their electrical and mechanical properties. An rGO-GNP lamellar aerogel with density of 20.8 ± 0.8 mg cm-3 reducing using a reduction of 60 min achieved an electrical conductivity of 42.3 S m-1. On the other hand, an optimal reduction time of 35 min led to an aerogel with compressive modulus of 0.51 ±0.06 MPa at a density of 23.2 ± 0.7 mg cm-3, revealing a compromise between the tuning of electrical and mechanical properties. We show the present processing route can also be easily applied to produce lamellar aerogels on other graphene-based materials such as electrochemically exfoliated graphene.

Fundamental Insights into Graphene Strain Sensing.

Graphene has been studied extensively for use in flexible electronics as ultrasensitive and wide-area strain sensors. Many sensors demonstrated so far rely on graphene networks, such that the spatial resolution is compromised, and they are unable to measure strain variations on a fine scale such as those resulting from substrate/interface failure. In this study, mono-/few-layer graphene are demonstrated to be good candidates for strain sensing with high spatial resolution to evaluate features <100 nm. The fundamentals of strain sensing-interaction with the target-have been discussed to shed light on the sensitivity and durability for future sensor fabrication. The proof-of-concept strain sensors have been shown to be able to monitor different states, e.g., the initiation and evolution, of crazes. The analysis also leads to the evaluation of interfacial energy and realization of high local strain in graphene that is applicable for other 2D materials for ultrasensitive strain sensing and bandgap opening applications.

Atmospheric Pressure Catalytic Vapor Deposition of Graphene on Liquid Sn and Cu-Sn Alloy Substrates.

The chemical vapor deposition (CVD) of graphene on liquid substrates produces high quality graphene films due to the defect-free and atomically flat surfaces of the liquids. Through the detailed study of graphene growth on liquid Sn using atmospheric pressure CVD (APCVD), the quality of graphene has been found to have a close relationship with hydrogen flow rate that reflects on hydrogen partial pressure inside the reactor (PH2) and hydrogen solubility of the growth substrates. The role of PH2 was found to be crucial, with a low defect density monolayer graphene being obtained in low PH2 (90.4 mbar), while partial graphene coverage occurred at high PH2 (137.3 mbar). To further understand the role of substrate's composition, binary alloy with compositions of 20, 30, 50, 60 and 80 wt.% tin in copper were made by arc-melting. Graphene quality was found to decrease with increasing the content of copper in the Cu-Sn alloys when grown using the conditions optimised for Sn substrates and this was related to the change in hydrogen solubility and the high catalytic activity of Cu compared to Sn. This shall provide a tool to help optimising CVD conditions for graphene growth based on the properties of the used catalytic substrate.

Graphene-Enabled Adaptive Infrared Textiles.

Interactive clothing requires sensing and display functionalities to be embedded on textiles. Despite the significant progress of electronic textiles, the integration of optoelectronic materials on fabrics remains as an outstanding challenge. In this Letter, using the electro-optical tunability of graphene, we report adaptive optical textiles with electrically controlled reflectivity and emissivity covering the infrared and near-infrared wavelengths. We achieve electro-optical modulation by reversible intercalation of ions into graphene layers laminated on fabrics. We demonstrate a new class of infrared textile devices including display, yarn, and stretchable devices using natural and synthetic textiles. To show the promise of our approach, we fabricated an active device directly onto a t-shirt, which enables long-wavelength infrared communication via modulation of the thermal radiation from the human body. The results presented here provide complementary technologies which could leverage the ubiquitous use of functional textiles.

Unravelling the Mechanism of Rechargeable Aqueous Zn-MnO2 Batteries: Implementation of Charging Process by Electrodeposition of MnO2.

Poor cycling stability and mechanistic controversies have hindered the wider application of rechargeable aqueous Zn-MnO2 batteries. Herein, direct evidence was provided of the importance of Mn2+ in this type of battery by using a bespoke cell. Without pre-addition of Mn2+ , the cell exhibited an abnormal discharge-charge profile, meaning it functioned as a primary battery. By adjusting the Mn2+ content in the electrolyte, the cell recovered its charging ability through electrodeposition of MnO2 . Additionally, a dynamic pH variation was observed during the discharge-charge process, with a precipitation of Zn4 (OH)6 (SO4 )⋅5H2 O buffering the pH of the electrolyte. Contrary to the conventional Zn2+ intercalation mechanism, MnO2 was first converted into MnOOH, which reverted to MnO2 through disproportionation, resulting in the dissolution of Mn2+ . The charging process occurred by the electrodeposition of MnO2 , thus improving the reversibility through the availability of Mn2+ ions in the solution.

A Universal Electrolyte Formulation for the Electrodeposition of Pristine Carbon and Polypyrrole Composites for Supercapacitors.

Electrodeposition of conducting polymer-carbon composites from an electrolyte precursor solution is a facile one-step approach to fabricate device-ready electrodes for energy storage. A key challenge in this approach is the dispersion of the carbon nanomaterials with the aqueous precursor solution with previous approaches either heavily oxidizing the carbon nanomaterials or using high concentrations of anionic surfactants as dopants. However, the former reduces the electrical conductivity of carbon, while the latter reduces the ionic mobility of the conducting polymer due to the large anion size. Herein, for the first time we present a quaternary electrolyte formulation for the fabrication of pristine carbon and polypyrrole (PPy) composites that does not sacrifice either electron or ion mobility. The electrolyte uses lithium perchlorate (20 mM) as a supporting electrolyte and dopant, sodium dodecylbenzenesulfonate at a very low concentration (1.43 mM) as a surfactant, together with pristine carbon nanomaterials and pyrrole monomers. The order of magnitude difference between the concentration of the dopant and surfactant ion allows the as-deposited PPy to be doped predominantly by small-sized and mobile perchlorate anions. Composites of PPy with carbon black, carbon nanotubes, and electrochemical exfoliated graphene (EEG) have been successfully prepared using this new quaternary electrolyte. The as-fabricated PPy/EEG composite electrodes showed a specific capacitance of 348.8 F g-1 with a high rate capability (190.7 F g-1 at 71 A g-1). Supercapacitor devices based on the PPy/EEG composite electrodes exhibit a high rate behavior up to 500 mV s-1 and a long cycle life of 5000 cycles.

Realising biaxial reinforcement via orientation-induced anisotropic swelling in graphene-based elastomers.

The biaxial mechanical properties constitute another remarkable advantage of graphene, but their evaluation has been overlooked in polymer nanocomposites. Herein, we provided an innovative and practical method to characterise biaxial reinforcement from graphene via swelling of elastomers, where graphene nanoplatelets (GNPs) were controlled to be oriented in-plane. The in-plane-aligned graphene imposed a biaxial constraining force to the elastomer during the swelling process that led to the anisotropic swelling behaviour of the bulk nanocomposites. This unconventional swelling behaviour was successfully modelled using statistical mechanics. Novel in situ Raman band shift measurements were also performed during the de-swelling process of the samples. The characteristic 2D band shift of the GNPs, imposed by stress transfer during the de-swelling procedure, was of the order of 0.1 cm-1 per % strain, enabling the calculation of the effective biaxial Young's modulus of the GNPs in the nanocomposites (∼2 GPa). The determination of the biaxial modulus of GNPs contributed to the evaluation of their Poisson's ratio (∼0.34), which is very important but highly impractical to be measured directly on a nanoscale-sized specimen.

Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites.

Polymer nanocomposites reinforced with carbon-based nanofillers are gaining increasing interest for a number of applications due to their excellent properties. The understanding of the reinforcing mechanisms is, therefore, very important for the maximization of performance. This present review summarizes the current literature status on the mechanical properties of composites reinforced with graphene-related materials (GRMs) and carbon nanotubes (CNTs) and identifies the parameters that clearly affect the mechanical properties of the final materials. It is also shown how Raman spectroscopy can be utilized for the understanding of the stress transfer efficiency from the matrix to the reinforcement and it can even be used to map stress and strain in graphene. Importantly, it is demonstrated clearly that continuum micromechanics that was initially developed for fibre-reinforced composites is still applicable at the nanoscale for both GRMs and CNTs. Finally, current problems and future perspectives are discussed.

The formation mechanism of hexagonal Mo2C defects in CVD graphene grown on liquid copper.

Thin Mo2C hexagonal defects precipitate in CVD graphene when Mo crucibles are engaged to hold the liquid copper substrate, while these defects disappear when W crucibles are present. These defects have been identified as the thin precipitates of Mo2C. The growth mechanism of the Mo2C defects is demonstrated through thermodynamic calculations. This can be beneficial in graphene defect engineering through the vapour phase transport of the volatile MoO3 phase.

Patterned, morphing composites via maskless photo-click lithography.

Morphing materials, also known as smart materials are attracting increasing attention as sensors, actuators and in soft robotic applications. In this work bilayered morphing composites were created by exploiting the thiol-ene photoclick reaction via maskless digital light processing (DLP). This technique allows for gradients and patterns of near infrared (nIR)-triggered materials to be efficiently crosslinked to substrates, with suitable interfacial adhesion to realise complex morphing. Photo-thermally responsive composites are produced by DLP patterning of reduced graphene oxide-filled chitosan-methacrylamide (rGO-chitosan-MA) on thiolated polydimethylsiloxane substrates via thiol-ene photoclick reaction. Morphing composites with parallel striped patterns and box-like hinges were printed via DLP to realise self-rolling and self-folding behaviours. Bilayered structures, with gradient rGO-chitosan-MA thicknesses (2-8 µm), were produced by controlling the light intensity from the DLP device. These gradient bilayered structures enable photothermal-triggered gradient bending and morphing exemplified here by a "walking worm" and a kirigami-inspired "opening flower". Thermo-mechanical calculations were performed to estimate bending angles, and finite element analysis applied to simulate self-folding and bending. The difference between simulation and measurements is in the range 0.4-7.6%, giving confidence to the assumptions and simplifications applied in design.

Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics.

Conductive inks for the future printed electronics should have the following merits: high conductivity, flexibility, low cost, and compatibility with wide range of substrates. However, the state-of-the-art conductive inks based on metal nanoparticles are high in cost and poor in flexibility. Herein, we reported a highly conductive, low cost, and super flexible ink based on graphene nanoplatelets. The graphene ink has been screen-printed on plastic and paper substrates. Combined with postprinting treatments including thermal annealing and compression rolling, the printed graphene pattern shows a high conductivity of 8.81 × 104 S m-1 and good flexibility without significant conductivity loss after 1000 bending cycles. We further demonstrate that the printed highly conductive graphene patterns can act as current collectors for supercapacitors. The supercapacitor with the printed graphene pattern as the current collector and printed activated carbon as the active material shows a good rate capability of up to 200 mV s-1. This work potentially provides a promising route toward the large-scale fabrication of low cost yet flexible printed electronic devices.

Systematic Comparison of Graphene Materials for Supercapacitor Electrodes.

A comparison of the performance of graphene-based supercapacitors is difficult, owing to the variety of production methods used to prepare the materials. To the best of our knowledge, there has been no systematic investigation into the effect of the graphene production method on the supercapacitor performance. In this work, we compare graphene produced through several routes. This includes anodic and cathodic electrochemically exfoliated graphene, liquid phase exfoliated graphene, graphene oxide, reduced graphene oxide, and graphene nanoribbons. Graphene oxide exhibited the highest capacitance of approximately 154 F g-1 in 6 M KOH at 0.5 A g-1 attributed to oxygen functional groups giving an additional pseudocapacitance and preventing significant restacking; however, the capacitance retention was poor, owing to the low conductivity. In comparison, the anodic electrochemically exfoliated graphene exhibited a capacitance of approximately 44 F g-1, the highest of the 'pure' graphene materials, which all exhibited superior capacitance retention, owing to their higher conductivity. The cyclability of all of the materials, with the exception of reduced graphene oxide (70 %), was found to be greater than 95 % after 10 000 cycles. These results highlight the importance of matching the graphene production method with a specific application; for example, graphene oxide and anodic electrochemically exfoliated graphene would be best suited for high energy and power applications, respectively.

Surface functionality analysis by Boehm titration of graphene nanoplatelets functionalized via a solvent-free cycloaddition reaction.

In this work, the functionalization of graphene nanoplatelets (GNPs) performed by a solvent-free cycloaddition reaction on GNPs with iminodiacetic acid (IDA) and paraformaldehyde (PFA), and the functionality analysis of the resulting functionalized GNPs (f-GNPs) by Boehm titration are introduced. The f-GNPs synthesized at different temperatures were characterized by X-ray diffraction (XRD), Raman spectroscopy and scanning electron microscopy (SEM) for structural and morphological properties. Back titration of the f-GNPs selectively identified 3 types of functional groups on the f-GNP surface, carboxylic, lactonic and phenolic, and suggested that 200 °C gives the highest carboxylic group functionality. With the reaction temperature increasing from 180 to 220 °C, a decrease in the phenolic functionality and an increase in that of lactonic are observed. In the case of 250 °C reactions, it was found that the carboxylic functionality is greatly reduced, while the phenolic functionality showed a significant increase. The f-GNP samples were further characterized by thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS), the results of which showed a good agreement with the titration analysis.