Human-Infrastructure Interactions during the COVID-19 Pandemic: Understanding Water and Electricity Demand Profiles at the Building Level.

When engineers design and manage a building's water and electricity utilities, they must make assumptions about resource use. These assumptions are often challenged when unexpected changes in demand occur, such as the spatial and temporal changes observed during the coronavirus (COVID-19) pandemic. Social distancing policies (SDPs) enacted led many universities to close their campuses and implement remote learning, impacting utility consumption patterns. Yet, little is known about how consumption changed at the building level. Here, we aim to understand how water and electricity consumption changed during the pandemic by identifying characteristic weekly demand profiles and understanding how these changes were related to regulatory and social systems. We performed k-means clustering on utility demand data measured before and as the pandemic evolved from five buildings of different types at the University of Texas at Austin. As expected, after SDPs were enacted both water and electricity use shifted, with most buildings seeing a sharp initial decline that remained low until the university partially reopened. In contrast to electricity use, we found that water use was tightly coupled with SDPs. Our study provides actionable information for managers to mitigate negative impacts (e.g., water stagnation) and capitalize on opportunities to minimize resource use.

Development of a reproducible method for monitoring SARS-CoV-2 in wastewater.

Monitoring the genetic signal of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) through RNA titers in wastewater has emerged as a promising strategy for tracking community-scale prevalence of coronavirus disease 2019 (COVID-19). Although many studies of SARS-CoV-2 in wastewater have been conducted around the world, a uniform procedure for concentrating the virus in wastewater is lacking. The goal of this study was to comprehensively evaluate how different methods for concentrating the suspended solids in wastewater affect the associated SARS-CoV-2 RNA signal and the time required for processing samples for wastewater-based epidemiology efforts. We additionally consider the effects of sampling location in the wastewater treatment train (i.e., following preliminary or primary treatment), pasteurization, and RNA extraction method. Comparison of the liquid phase to suspended solids obtained via centrifugation or vacuum filtration suggests that the RNA signal of SARS-CoV-2 preferentially occurs in the solids. Therefore, we assert that the recovery of SARS-CoV-2 from wastewater should focus on suspended solids. Our data indicate that the measured SARS-CoV-2 signal is higher among samples taken from the primary clarifier effluent, as opposed to those taken after preliminary treatment. Additionally, we provide evidence that sample pasteurization at 60 °C for 90 min reduces the SARS-CoV-2 signal by approximately 50-55%. Finally, the results indicate that a magnetic bead approach to RNA extraction leads to a higher SARS-CoV-2 signal than does a silica membrane approach.

Multi-modal data collection for measuring health, behavior, and living environment of large-scale participant cohorts.

BACKGROUND: As mobile technologies become ever more sensor-rich, portable, and ubiquitous, data captured by smart devices are lending rich insights into users' daily lives with unprecedented comprehensiveness and ecological validity. A number of human-subject studies have been conducted to examine the use of mobile sensing to uncover individual behavioral patterns and health outcomes, yet minimal attention has been placed on measuring living environments together with other human-centered sensing data. Moreover, the participant sample size in most existing studies falls well below a few hundred, leaving questions open about the reliability of findings on the relations between mobile sensing signals and human outcomes. RESULTS: To address these limitations, we developed a home environment sensor kit for continuous indoor air quality tracking and deployed it in conjunction with smartphones, Fitbits, and ecological momentary assessments in a cohort study of up to 1,584 college student participants per data type for 3 weeks. We propose a conceptual framework that systematically organizes human-centric data modalities by their temporal coverage and spatial freedom. Then we report our study procedure, technologies and methods deployed, and descriptive statistics of the collected data that reflect the participants' mood, sleep, behavior, and living environment. CONCLUSIONS: We were able to collect from a large participant cohort satisfactorily complete multi-modal sensing and survey data in terms of both data continuity and participant adherence. Our novel data and conceptual development provide important guidance for data collection and hypothesis generation in future human-centered sensing studies.

Distribution of SARS-CoV-2 RNA signal in a home with COVID-19 positive occupants.

Although many COVID-19 patients isolate and recover at home, the dispersal of SARS-CoV-2 onto surfaces and dust within the home environment remains poorly understood. To investigate the distribution and persistence of SARS-CoV-2 in a home with COVID-19 positive occupants, samples were collected from a household with two confirmed COVID-19 cases (one adult and one child). Home surface swab and dust samples were collected two months after symptom onset (and one month after symptom resolution) in the household. The strength of the SARS-CoV-2 molecular signal in fomites varied as a function of sample location, surface material and cleaning practices. Notably, the SARS-CoV-2 RNA signal was detected at several locations throughout the household although cleaning appears to have attenuated the signal on many surfaces. Of the 24 surfaces sampled, 46% were SARS-CoV-2 positive at the time of sampling. The SARS-CoV-2 concentrations in dust recovered from floor and HVAC filter samples ranged from 104 to 105 N2 gene copies/g dust. While detection of viral RNA does not imply infectivity, this study confirms that the SARS-CoV-2 RNA signal can be detected at several locations within a COVID-19 isolation home and can persist after symptoms have resolved. In addition, the concentration of SARS-CoV-2 (normalized per unit mass of dust) recovered in home HVAC filters may prove useful for estimating SARS-CoV-2 airborne levels in homes. In this work, using the quantitative filter forensics methodology, we estimated an average integrated airborne SARS-CoV-2 concentration of 69 ± 43 copies/m3. This approach can be used to help building scientists and engineers develop best practices in homes with COVID-19 positive occupants.

Supersaturated-oxygen aeration effects on a high-loaded membrane bioreactor (HL-MBR): Biological performance and microbial population dynamics.

Conventional diffused aeration systems (such as fine-bubble diffusers) exhibit a poor oxygen transfer in wastewater treatment plants (WWTPs), particularly when operating at sludge concentrations higher than 15 g L-1. The supersaturated dissolved oxygen (SDOX) system has been proposed as an alternative for supplying dissolved oxygen (DO) at high mixed liquor suspended solids (MLSS) concentrations. The advantages introduced by such technology include the possibility of operating WWTPs at much higher than usual MLSS concentrations, increasing the treatment capacity of WWTPs. Recent studies have demonstrated that the SDOX system has higher oxygen transfer rates (OTRs) and oxygen transfer efficiencies (OTEs) relative to fine-bubble diffusers. However, it is unknown if the high-pressure conditions introduced by SDOX may possibly impact the biological performance of WWTPs. In this study, the effects of SDOX technology on the biological performance of a membrane bioreactor (MBR) were evaluated. The MBR was operated at an MLSS concentration of approximately 15 g L-1 in four phases as follows: (P1) with bubble diffusers, (P2) with an SDOX unit, (P3) with the bubble diffusers, and (P4) with the SDOX unit. The performance of the MBR was assessed by monitoring the sludge concentration, as well as changes in the particle size distribution (PSD), sludge activity, organic matter removal and nitrification performance, and changes in the microbial community within the MBR. The operational conditions exerted by the SDOX technology did not affect the concentration of active biomass during the study period. The biological performance of the MBR was not affected by the introduction of the SDOX technology. Finally, the microbial community was relatively stable although some variations at the family and genus level were evident during each of the study phases. Therefore, the SDOX system can be proposed as an alternative technology for DO supply in WWTPs increasing the overall treatment capacity.

Implications of Social Distancing Policies on Drinking Water Infrastructure: An Overview of the Challenges to and Responses of U.S. Utilities during the COVID-19 Pandemic.

Social distancing policies (SDPs) implemented throughout the United States in response to COVID-19 have led to spatial and temporal shifts in drinking water demand and, for water utilities, created sociotechnical challenges. During this unique period, many water utilities have been forced to operate outside of design conditions with reduced workforce and financial capacities. Few studies have examined how water utilities respond to a pandemic; such methods are even absent from many emergency response plans. Here, we documented how utilities have been impacted by the COVID-19 pandemic. We conducted a qualitative analysis of 30 interviews with 53 practitioners spanning 28 U.S. water utilities. Our aim was to, first, understand the challenges experienced by utilities and changes to operations (e.g., demand and deficit accounts) and, second, to document utilities' responses. Results showed that to maintain service continuity and implement SDPs, utilities had to overcome various challenges. These include supply chain issues, spatiotemporal changes in demand, and financial losses, and these challenges were largely dependent on the type of customers served (e.g., commercial or residential). Examples of utilities' responses include proactively ordering extra supplies and postponing capital projects. Although utilities' adaptations ensured the immediate provision of water services, their responses might have negative repercussions in the future (e.g., delayed projects contributing to aging infrastructure).

Longitudinal homogenization of the microbiome between both occupants and the built environment in a cohort of United States Air Force Cadets.

BACKGROUND: The microbiome of the built environment has important implications for human health and wellbeing; however, bidirectional exchange of microbes between occupants and surfaces can be confounded by lifestyle, architecture, and external environmental exposures. Here, we present a longitudinal study of United States Air Force Academy cadets (n = 34), which have substantial homogeneity in lifestyle, diet, and age, all factors that influence the human microbiome. We characterized bacterial communities associated with (1) skin and gut samples from roommate pairs, (2) four built environment sample locations inside the pairs' dormitory rooms, (3) four built environment sample locations within shared spaces in the dormitory, and (4) room-matched outdoor samples from the window ledge of their rooms. RESULTS: We analyzed 2,170 samples, which generated 21,866 unique amplicon sequence variants. Linear convergence of microbial composition and structure was observed between an occupants' skin and the dormitory surfaces that were only used by that occupant (i.e., desk). Conversely, bacterial community beta diversity (weighted Unifrac) convergence between the skin of both roommates and the shared dormitory floor between the two cadet's beds was not seen across the entire study population. The sampling period included two semester breaks in which the occupants vacated their rooms; upon their return, the beta diversity similarity between their skin and the surfaces had significantly decreased compared to before the break (p < 0.05). There was no apparent convergence between the gut and building microbiota, with the exception of communal bathroom door-handles, which suggests that neither co-occupancy, diet, or lifestyle homogenization had a significant impact on gut microbiome similarity between these cadets over the observed time frame. As a result, predictive classifier models were able to identify an individual more accurately based on the gut microbiota (74%) compared to skin (51%). CONCLUSIONS: To the best of our knowledge, this is the first study to show an increase in skin microbial similarity of two individuals who start living together for the first time and who are not genetically related or romantically involved. Cohabitation was significantly associated with increased skin microbiota similarity but did not significantly influence the gut microbiota. Following a departure from the occupied space of several weeks, the skin microbiota, but not the gut microbiota, showed a significant reduction in similarity relative to the building. Overall, longitudinal observation of these dynamics enables us to dissect the influence of occupation, diet, and lifestyle factors on occupant and built environment microbial ecology.

An examination of the microbial community and occurrence of potential human pathogens in rainwater harvested from different roofing materials.

While harvested rainwater can serve as an alternative water supply, microbial contaminants within the collection system can negatively affect water quality. Here, we investigated the impact of roofing material on the microbial quality of rainwater freshly harvested from pilot-scale roofs (concrete tile, cool, green, Galvalume® metal, and asphalt fiberglass shingle). The microbial quality of freshly harvested rainwater from six rain events over two years was analyzed by high-throughput sequencing and culture-dependent and -independent techniques. The concentrations of total coliform were significantly different among rainwaters harvested from the various roofing materials (p-value >0.05). However, the fecal coliform concentrations and the copy numbers of Enterococcus 23S rRNA genes and total Bacteria 16S rRNA genes did not vary by type of roofing material in a statistically significant way. Potential human pathogens such as Legionella, Escherichia coli O157:H7, Shiga-toxin-producing Escherichia coli, and adenovirus were detected at least once in rainwater harvested from the different roofing materials, even though the lowest occurrence of those potential human pathogens was noted from the metal roof. Also, substantial variation in the microbial communities from the different roofing materials was observed at the family and genus levels. These results demonstrate that the type of roofing material affects the microbial quality of freshly harvested rainwater, indicating that the choice of roofing material could shape the microbial community structure entering a rainwater storage tank. Given that detection of potential pathogens in the freshly harvested rainwater also differed between roofing materials, the type of roofing used to capture rainwater needs to be considered in rainwater harvesting system design, particularly if the water is intended for potable use.

Laccase removal of 2-chlorophenol and sulfamethoxazole in municipal wastewater.

Laccases were studied for their ability to remove two compounds, 2-chlorophenol and sulfamethoxazole, in batch studies, both in buffered solutions and in wastewater samples from different points in a municipal water resource recovery facility. Two enzymes with and without a mediator (acetosyringone) were investigated: a commercial product derived from Myceliphthora thermophile and a laboratory-generated enzyme mix derived from Tramates versicolor. The chlorophenol was removed rapidly by the commercial enzyme in the presence of acetosyringone, but the primary products were coupling complexes of the reactants. Excellent removal was achieved without acetosyringone by the natural enzyme mix. Sulfamethoxazole was poorly removed in all laboratory-generated chemically buffered solutions, but was very well removed, without the addition of mediators, in secondary effluent suspensions from a municipal water resource recovery facility. Mechanistic studies are still required, but the results suggest that treatment via direct addition of enzymes is feasible to remove recalcitrant compounds in municipal wastewater.

Quantitative filter forensics with residential HVAC filters to assess indoor concentrations.

Analysis of the dust from heating, ventilation, and air conditioning (HVAC) filters is a promising long-term sampling method to characterize airborne particle-bound contaminants. This filter forensics (FF) approach provides valuable insights about differences between buildings, but does not allow for an estimation of indoor concentrations. In this investigation, FF is extended to quantitative filter forensics (QFF) by using measurements of the volume of air that passes through the filter and the filter efficiency, to assess the integrated average airborne concentrations of total fungal and bacterial DNA, 36 fungal species, endotoxins, phthalates, and organophosphate esters (OPEs) based on dust extracted from HVAC filters. Filters were collected from 59 homes located in central Texas, USA, after 1 month of deployment in each summer and winter. Results showed considerable differences in the concentrations of airborne particle-bound contaminants in studied homes. The airborne concentrations for most of the analytes are comparable with those reported in the literature. In this sample of homes, the HVAC characterization measurements varied much less between homes than the variation in the filter dust concentration of each analyte, suggesting that even in the absence of HVAC data, FF can provide insight about concentration differences for homes with similar HVAC systems.

Effect of CaCO3(S) Nucleation Modes on Algae Removal from Alkaline Water.

The role of calcite heterogeneous nucleation was studied in a particle-coagulation treatment process for removing microalgae from water. Batch experiments were conducted with Scenedesmus sp. and Chlorella sp. in the presence and absence of carbonate and in the presence and absence of magnesium to delineate the role of CaCO3(S) nucleation on microalgae removal. The results indicate that effective algae coagulation (e.g., up to 81% algae removal efficiency) can be achieved via heterogeneous nucleation with CaCO3(S); however, supersaturation ratios between 120 and 200 are required to achieve at least 50% algae removal, depending on ion concentrations. Algae removal was attributed to the adsorption of Ca2+ onto the cell surface, which provides nucleation sites for CaCO3(S) precipitation. Bridging of calcite particles between the algal cells led to rapid aggregation and formation of larger flocs. However, at higher supersaturation conditions, algae removal was diminished due to the dominance of homogeneous nucleation of CaCO3(S). The removal of algae in the presence of Ca2+ and Mg2+ required higher supersaturation values; however, the shift from heteronucleation to homonucleation with increasing supersaturation was still evident. The results suggest that water chemistry, pH, ionic strength, alkalinity, and Ca2+ concentration can be optimized for algae removal via coagulation and sedimentation.

Phthalates and organophosphates in settled dust and HVAC filter dust of U.S. low-income homes: Association with season, building characteristics, and childhood asthma.

Phthalates and organophosphates are ubiquitous indoor semi-volatile organic contaminants (SVOCs) that have been widely used as plasticizers and flame retardants in consumer products. Although many studies have assessed their levels in house dust, only a few used dust samples captured by filters of building heating, ventilation, and air conditioning (HVAC) systems. HVAC filters collect particles from large volumes of air over a long period of time (potentially known) and thus provide a spatially and temporally integrated concentration. This study measured concentrations of phthalates and organophosphates in HVAC filter dust and settled floor dust collected from low-income homes in Texas, United States, in both the summer and winter seasons. The most frequently detected compounds were benzyl butyl phthalate (BBzP), di-(2-ethylhexyl) phthalate (DEHP), di-n-octyl phthalate (DnOP), tris (1-chloro-2-propyl) phosphate (TCIPP), triphenyl phosphate (TPHP), and tris (1,3-dichloroisopropyl) phosphate (TDCIPP). The median level of TCIPP in settled dust was 3- to 180-times higher than levels reported in other studies of residential homes. Significantly higher concentrations were observed in HVAC filter dust as compared to settled dust for most of the frequently detected compounds in both seasons, except for several phthalates in the winter. SVOC concentrations in settled dust in winter were generally higher than in summer, while different seasonality patterns were found for HVAC filter dust. Settled dust samples from homes with vinyl flooring contained significantly higher levels of BBzP and DEHP as compared to homes with other types of floor material. The concentration of DEHP and TDCIPP in settled dust also significantly associated with the presence of carpet in homes. Cleaning activities to remove dust from furniture actually increased the levels of certain compounds in HVAC filter dust, while frequent vacuuming of carpet helped to decrease the concentrations of some compounds in settled dust. Additionally, the size and age of a given house also correlated with the levels of some pollutants in dust. A statistically significant association between DEHP concentration in HVAC filter dust in summer and the severity of asthma in children was observed. These results suggest that HVAC filter dust represents a useful sampling medium to monitor indoor SVOC concentrations with high sensitivity; in contrast, when using settled dust, in addition to consideration of seasonal influences, it is critical to know the sampling location because the type and level of SVOCs may be related to local materials used there.

Filter forensics: microbiota recovery from residential HVAC filters.

BACKGROUND: Establishing reliable methods for assessing the microbiome within the built environment is critical for understanding the impact of biological exposures on human health. High-throughput DNA sequencing of dust samples provides valuable insights into the microbiome present in human-occupied spaces. However, the effect that different sampling methods have on the microbial community recovered from dust samples is not well understood across sample types. Heating, ventilation, and air conditioning (HVAC) filters hold promise as long-term, spatially integrated, high volume samplers to characterize the airborne microbiome in homes and other climate-controlled spaces. In this study, the effect that dust recovery method (i.e., cut and elution, swabbing, or vacuuming) has on the microbial community structure, membership, and repeatability inferred by Illumina sequencing was evaluated. RESULTS: The results indicate that vacuum samples captured higher quantities of total, bacterial, and fungal DNA than swab or cut samples. Repeated swab and vacuum samples collected from the same filter were less variable than cut samples with respect to both quantitative DNA recovery and bacterial community structure. Vacuum samples captured substantially greater bacterial diversity than the other methods, whereas fungal diversity was similar across all three methods. Vacuum and swab samples of HVAC filter dust were repeatable and generally superior to cut samples. Nevertheless, the contribution of environmental and human sources to the bacterial and fungal communities recovered via each sampling method was generally consistent across the methods investigated. CONCLUSIONS: Dust recovery methodologies have been shown to affect the recovery, repeatability, structure, and membership of microbial communities recovered from dust samples in the built environment. The results of this study are directly applicable to indoor microbiota studies utilizing the filter forensics approach. More broadly, this study provides a better understanding of the microbial community variability attributable to sampling methodology and helps inform interpretation of data collected from other types of dust samples collected from indoor environments.

The Microbiota, Immunoregulation, and Mental Health: Implications for Public Health.

The hygiene or "Old Friends" hypothesis proposes that the epidemic of inflammatory disease in modern urban societies stems at least in part from reduced exposure to microbes that normally prime mammalian immunoregulatory circuits and suppress inappropriate inflammation. Such diseases include but are not limited to allergies and asthma; we and others have proposed that the markedly reduced exposure to these Old Friends in modern urban societies may also increase vulnerability to neurodevelopmental disorders and stress-related psychiatric disorders, such as anxiety and affective disorders, where data are emerging in support of inflammation as a risk factor. Here, we review recent advances in our understanding of the potential for Old Friends, including environmental microbial inputs, to modify risk for inflammatory disease, with a focus on neurodevelopmental and psychiatric conditions. We highlight potential mechanisms, involving bacterially derived metabolites, bacterial antigens, and helminthic antigens, through which these inputs promote immunoregulation. Though findings are encouraging, significant human subjects' research is required to evaluate the potential impact of Old Friends, including environmental microbial inputs, on biological signatures and clinically meaningful mental health prevention and intervention outcomes.

The microbiome of the built environment and mental health.

The microbiome of the built environment (MoBE) is a relatively new area of study. While some knowledge has been gained regarding impacts of the MoBE on the human microbiome and disease vulnerability, there is little knowledge of the impacts of the MoBE on mental health. Depending on the specific microbial species involved, the transfer of microorganisms from the built environment to occupant's cutaneous or mucosal membranes has the potential to increase or disrupt immunoregulation and/or exaggerate or suppress inflammation. Preclinical evidence highlighting the influence of the microbiota on systemic inflammation supports the assertion that microorganisms, including those originating from the built environment, have the potential to either increase or decrease the risk of inflammation-induced psychiatric conditions and their symptom severity. With advanced understanding of both the ecology of the built environment, and its influence on the human microbiome, it may be possible to develop bioinformed strategies for management of the built environment to promote mental health. Here we present a brief summary of microbiome research in both areas and highlight two interdependencies including the following: (1) effects of the MoBE on the human microbiome and (2) potential opportunities for manipulation of the MoBE in order to improve mental health. In addition, we propose future research directions including strategies for assessment of changes in the microbiome of common areas of built environments shared by multiple human occupants, and associated cohort-level changes in the mental health of those who spend time in the buildings. Overall, our understanding of the fields of both the MoBE and influence of host-associated microorganisms on mental health are advancing at a rapid pace and, if linked, could offer considerable benefit to health and wellness.

Indoor particulate reactive oxygen species concentrations.

Despite the fact that precursors to reactive oxygen species (ROS) are prevalent indoors, the concentration of ROS inside buildings is unknown. ROS on PM2.5 was measured inside and outside twelve residential buildings and eleven institutional and retail buildings. The mean (± s.d.) concentration of ROS on PM2.5 inside homes (1.37 ± 1.2 nmoles/m(3)) was not significantly different from the outdoor concentration (1.41 ± 1.0 nmoles/m(3)). Similarly, the indoor and outdoor concentrations of ROS on PM2.5 at institutional buildings (1.16 ± 0.38 nmoles/m(3) indoors and 1.68 ± 1.3 nmoles/m(3) outdoors) and retail stores (1.09 ± 0.93 nmoles/m(3) indoors and 1.12 ± 1.1 nmoles/m(3) outdoors) were not significantly different and were comparable to those in residential buildings. The indoor concentration of particulate ROS cannot be predicted based on the measurement of other common indoor pollutants, indicating that it is important to separately assess the concentration of particulate ROS in air quality studies. Daytime indoor occupational and residential exposure to particulate ROS dominates daytime outdoor exposure to particulate ROS. These findings highlight the need for further study of ROS in indoor microenvironments.

Laboratory and field evaluation of a pretreatment system for removing organics from produced water.

Co-produced water from the oil and gas industry accounts for a significant waste stream in the United States. This "produced water" is characterized by saline water containing a variety of pollutants, including water soluble and immiscible organics and many inorganic species. To reuse produced water, removal of both the inorganic dissolved solids and organic compounds is necessary. In this research, the effectiveness of a pretreatment system consisting of surfactant modified zeolite (SMZ) adsorption followed by a membrane bioreactor (MBR) was evaluated for simultaneous removal of carboxylates and hazardous substances, such as benzene, toluene, ethylbenzene, and xylenes (BTEX) from saline-produced water. A laboratory-scale MBR, operated at a 9.6-hour hydraulic residence time, degraded 92% of the carboxylates present in synthetic produced water. When BTEX was introduced simultaneously to the MBR system with the carboxylates, the system achieved 80 to 95% removal of BTEX via biodegradation. These results suggest that simultaneous biodegradation of both BTEX and carboxylate constituents found in produced water is possible. A field test conducted at a produced water disposal facility in Farmington, New Mexico confirmed the laboratory-scale results for the MBR and demonstrated enhanced removal of BTEX using a treatment train consisting of SMZ columns followed by the MBR. While most of the BTEX constituents of the produced water adsorbed onto the SMZ adsorption system, approximately 95% of the BTEX that penetrated the SMZ and entered the MBR was biodegraded in the MBR. Removal rates of acetate (influent concentrations of 120 to 170 mg/L) ranged from 91 to 100%, and total organic carbon (influent concentrations as high as 580 mg/L) ranged from 74 to 92%, respectively. Organic removal in the MBR was accomplished at a low biomass concentration of 1 g/L throughout the field trial. While the transmembrane pressure during the laboratory-scale tests was well-controlled, it rose substantially during the field test, where no pH control was implemented. The results suggest that pretreatment with an SMZ/MBR system can provide substantial removal of organic compounds present in produced water, a necessary first step for many water-reuse applications.

Effects of cyclic changes in pH and salinity on metals release from sediments.

The effects of dynamic changes in pH and salinity on metal speciation and release are investigated with sediments posed in a simulated estuarine environment. The release of Zn, Cd, Mn, and Fe was studied using sediment from the Anacostia River (Washington, DC, USA) spiked with freshly precipitated amorphous cadmium sulfide to increase Cd content. The sediment was exposed to salt water (high pH, ionic strength) and freshwater (neutral pH, minimal ionic strength) continuously and alternately (to mimic tidal changes) in small microcosms over 100 d. At the conclusion of the experiments, the vertical profiles of acid volatile sulfide (AVS) and simultaneously extracted metals (SEM) as well as porewater metals and anion concentrations were characterized. Acid volatile sulfide oxidation at the sediment surface led to a commensurate increase in dissolved metal species and metal release that was strongly dependent on the changes in the overlying water characteristics. Total Cd release was substantially higher during exposure to salt water, although, as a result of complexation, predicted dissolved Cd(2+) concentration in the overlying water was higher during exposure to freshwater. Total Zn release was little changed during exposure to salt water and freshwater, although the predicted dissolved Zn(2+) concentration was much higher during freshwater exposures. No significant iron was released because of the rapid oxidation of ferrous iron (Fe(2+)) in aerobic surficial sediments and overlying water. The present study suggests that cyclic changes in pH and salinity in the overlying water can dramatically influence metal release from estuarine sediments.