Determination of the Rayleigh Ratio with an Uncertainty Analysis by Static Light-Scattering Measurements of Certified Reference Materials for Molecular Weight.

The most important parameter for light-scattering measurements in the Rayleigh scattering region is the Rayleigh ratio, which is necessary to obtain the absolute scattered light intensity from the relative scattered light intensity. The absolute scattered light intensity is directly related to the molar masses of polymers, colloids, biomolecules, and the like. A new Rayleigh ratio was determined by measuring static light scattering from certified reference materials with highly accurate certified values of the molecular weight determined by several other techniques, such as MALDI-TOF mass spectrometry or size-exclusion chromatography. The new Rayleigh ratio can be used for evaluating the uncertainty of the molecular weight of polymers and macromolecules, as measured by light scattering.

Effects of Angular Dependency of Particulate Light Scattering Intensity on Determination of Samples with Bimodal Size Distributions Using Dynamic Light Scattering Methods.

The angular dependency of light scattering intensity from differently sized particles strongly influences the apparent particle size distribution, as determined by dynamic light scattering (DLS) methods. Manufactured nanomaterials have size distributions more or less; therefore, the effect of detecting the angular dependency of the apparent size distribution by DLS is crucial. Commercial DLS instruments typically have two different types of detector angular position. The first is a detector angled at 90°, and the other is a backscattering angle detector. We therefore investigated the coverage and angular dependency when determining the relative concentrations of nanoparticles in polystyrene latex samples with a bimodal size distribution, using DLS methods both experimentally and theoretically. We used five differently sized polystyrene latex particles (one was a 70-nm nanoparticle and the others were various submicron-sized particles) in a variety of mixtures (the ratio of the difference of particle sizes ranged from approximately 2 to 7) to investigate the coverage and angular dependency of the recognition of the relative concentration ratio. In the case of size difference of approximately a factor of 2 or 3 between the two mixed particles (one was fixed at 70 nm), for DLS measurements at light scattering detector angles ranging from 60° to 150°, the homodyne photon correlation functions were approximately straight lines for mixtures of two differently sized polystyrene latex particles. The straight homodyne photon correlation functions were caused by the relatively strong light scattering from larger submicron particles masking the weaker light scattering from the smaller nanoparticles. As a result, DLS analysis could not recognize the relative concentration of nanoparticles in the mixture. In contrast to these samples, for mixtures of two differently sized polystyrene latex particles (one was 70 nm in size) with a size difference of a factor of 5, the homodyne correlation functions displayed an obvious curve for angles larger than 120°. This curve reflected an appropriate relative concentration ratio for the two differently sized polystyrene latex particles. Furthermore, for a mixture of two differently sized particles (one was again 70 nm) with size differences of a factor of 7, the homodyne correlation functions showed a clearly curved shape for detector angles larger than 90°, and yielded appropriate relative concentration ratios for the two different sizes of polystyrene latex particles. These observations were supported by theoretical investigation using Mie theory and asymmetric flow field-flow fractionation measurements with a multi-angle light scattering detector. Our investigation is crucial for achieving some degree of concordance on the determination of the size distribution of particles using DLS methods in industrial and academic fields.

Effects of densities of brominated flame retardants on the detection response for HPLC analysis with a corona-charged aerosol detector.

Dependence of the response of a corona-charged aerosol detector (corona CAD) on the concentration and densities of brominated flame retardants and some related substrates was studied. The calibration curves of the substrates did not show linearity and the substrate with a lower density exhibited the stronger response. Regardless of the solvents (chloroform or toluene), and the injected volume of the substrate solution, the signal intensity of the substrate observed by a corona CAD was substantially proportional to 2/3 power law of concentration and proportional to (-2/3) power law of the density of the substrates. These results suggest that the responses should be proportional to the surface area of the particles generated through the drying process in corona CAD. Contrary to the former reports that the detector response of a corona CAD was independent of chemical species, it was proved that the response varies with the density of a substrate.

Cellular effects of industrial metal nanoparticles and hydrophilic carbon black dispersion.

The effects of five types of metal nanoparticles, gold (Au), silver (Ag), platinum (Pt), Au-polyvinylpyrrolidone (PVP) colloid, and Pt-PVP colloid, and two types of hydrophilic carbon black on cell behavior were examined. Stable nanoparticle dispersions were prepared and applied to the culture medium of human keratinocyte (HaCaT) and human lung carcinoma (A549) cells for 6 and 24 hr. Then, the mitochondrial activity (MTT assay) and the induction of cellular oxidative stress were examined. The exposure to Au and Ag decreased mitochondrial activity. The exposure to Pt nanoparticles induced an increase in the intracellular reactive oxygen species (ROS) level. In contrast, Au-PVP, Pt-PVP, and hydrophilic carbon black did not exhibit any effects. The observed increase in the ROS level induced by the Pt nanoparticles in this study contradicted our previous findings, in which Pt did not produce chemically reactive molecules. Some nanoparticle dispersions included chemicals as the dispersant, which is used in industrial applications. In some cases, the dispersing agent may have caused some cellular effects. Adsorption of agents on the surface of the nanoparticles may be an important factor here. Hence, the cellular effects of industrial nanoparticles should be evaluated carefully.

Evaluation of cellular influences caused by calcium carbonate nanoparticles.

The cellular effects of calcium carbonate (CaCO3) nanoparticles were evaluated. Three kinds of CaCO3 nanoparticles were employed in our examinations. One of the types of CaCO3 nanoparticles was highly soluble. And solubility of another type of CaCO3 nanoparticle was lower. A stable CaCO3 nanoparticle medium dispersion was prepared and applied to human lung carcinoma A549 cells and human keratinocyte HaCaT cells. Then, mitochondrial activity, cell membrane damage, colony formation ability, DNA injury, induction of oxidative stress, and apoptosis were evaluated. Although the influences of CaCO3 nanoparticles on mitochondrial activity and cell membrane damage were small, "soluble" CaCO3 nanoparticles exerted some cellular influences. Soluble CaCO3 nanoparticles also induced a cell morphological change. Colony formation was inhibited by CaCO3 nanoparticle exposure. In particular, soluble CaCO3 nanoparticles completely inhibited colony formation. The influence on intracellular the reactive oxygen species (ROS) level was small. Soluble CaCO3 nanoparticles caused an increase in C/EBP-homologous protein (CHOP) expression and the activation of caspase-3. Moreover, CaCO3 exposure increased intracellular the Ca²âº level and activated calpain. These results suggest that cellular the influences of CaCO3 nanoparticles are mainly caused by intracellular calcium release and subsequently disrupt the effect of calcium signaling. In conclusion, there is possibility that soluble CaCO3 nanoparticles induce cellular influences such as a cell morphological change. Cellular influence of CaCO3 nanoparticles is caused by intracellular calcium release. If inhaled CaCO3 nanoparticles have the potential to influence cellular events. However, the effect might be not severe because calcium is omnipresent element in cell.

In vitro evaluation of cellular influences induced by stable fullerene C70 medium dispersion: induction of cellular oxidative stress.

Fullerene is one of the nanocarbons that is expected to have applications to life science, such as nanomedicines. An understanding of the cellular influences of fullerene is essential for its application to life science. Although C60 and C70 are both known as major fullerenes, most previous reports about the cellular influences of fullerene are about C60. Thus we evaluated the cellular influences caused by C70. A stable and uniform C70-medium dispersion was prepared. The dispersion was stable for the experimental period. Mitochondrial activity (MTT assay), colony forming ability (clonogenic assay), induction of oxidative stress (intracellular ROS and lipid peroxidation levels) and cellular uptake (TEM observation) in human keratinocyte HaCaT and lung carcinoma A549 cells exposed to C70 were examined. C70 did not influence mitochondrial activity. On the other hand, C70 dispersion inhibited colony formation at the concentration of 25.2 µg mL(-1). Exposure to C70 dispersion caused an increase in intracellular ROS and lipid peroxidation levels. The induction of intracellular ROS level was inhibited by pre-treatment of the cells by antioxidants. TEM observations of C70 exposed cells showed cellular uptake of C70. These results were similar to the cellular influences caused by C60 which were reported by us previously. Although C70 did not cause cell death, it caused the induction of intracellular oxidative stress.

Physical properties of single-wall carbon nanotubes in cell culture and their dispersal due to alveolar epithelial cell response.

Concern over the influence of carbon nanotubes (CNTs) on human health has arisen due to advances; however, little is known about the potential toxicity of CNTs. In this study, impurity-free single-wall carbon nanotubes (SWCNTs), with different physical properties in cell culture medium, were prepared by a novel dispersion procedure. SWCNTs with small bundles (short linear shape) and SWCNTs with large bundles (long linear shape) did not cause a significant inhibition of cell proliferation, induction of apoptosis or arrest of cell cycle progression in A549 alveolar epithelial cells. Expression of many genes involved in the inflammatory response, apoptosis, response to oxidative stress and degradation of the extracellular matrix were not markedly upregulated or downregulated. However, SWCNTs with relatively large bundles significantly increased the level of intracellular reactive oxygen species (ROS) in a dose-dependent manner, and the levels of these ROS were higher than those of SWCNTs with relatively small bundles or commercial SWCNTs with residual metals. Transmission electron microscopy (TEM) revealed that impurity-free SWCNTs were observed in the cytoplasm and vacuoles of cells after 24 h. These results suggested that the physical properties, especially the size and length of the bundles of the SWCNTs dispersed in cell culture medium, contributed to a change in intracellular ROS generation, even for the same bulk SWCNTs. Additionally, the residual metals associated with the manufacturing of SWCNTs may not be a definitive parameter for intracellular ROS generation in A549 cells.

Chromium(III) oxide nanoparticles induced remarkable oxidative stress and apoptosis on culture cells.

Chromium(III) oxide (Cr(2)O(3)) is used for industrial applications such as catalysts and pigments. In the classical form, namely the fine particle, Cr(2)O(3) is insoluble and chemically stable. It is classified as a low-toxicity chromium compound. Recently, industrial application of nanoparticles (a new form composed of small particles with a diameter of ≤100 nm, in at least one dimension) has been increasing. Cellular effects induced by Cr(2)O(3) nanoparticles are not known. To shed light upon this, the release of soluble chromium from Cr(2)O(3) nano- and fine-particles in culture medium was compared. Fine Cr(2)O(3) particles were insoluble in the culture medium; on the contrary, Cr(2)O(3) nanoparticles released soluble hexavalent chromium into the culture medium. Cr(2)O(3) nanoparticles showed severe cytotoxicity. The effect of Cr(2)O(3) nanoparticles on cell viability was higher than that of fine particles. Cr(2)O(3) nanoparticles showed cytotoxicity equal to that of hexavalent chromium (K(2)Cr(2)O(7)). Human lung carcinoma A549 cells and human keratinocyte HaCaT cells showed an increase in intracellular reactive oxygen species (ROS) level and activation of antioxidant defense systems on exposure to Cr(2)O(3) nanoparticles. Exposure of Cr(2)O(3) nanoparticles led to caspase-3 activation, showing that the decrease in cell viability by exposure to Cr(2)O(3) nanoparticles was caused by apoptosis. Cellular responses were stronger in the Cr(2)O(3) nanoparticles-exposed cells than in fine Cr(2)O(3) - and CrCl(3) -exposed cells. Cellular uptake of Cr(2)O(3) particles were observed in nano- and fine-particles. The cellular influence of the extracellular soluble trivalent chromium was lower than that of Cr(2)O(3) nanoparticles. Cr(2)O(3) nanoparticles showed cytotoxicity by hexavalent chromium released at outside and inside of cells. The cellular influences of Cr(2)O(3) nanoparticles matched those of hexavalent chromium. In conclusion, Cr(2)O(3) nanoparticles have a high cytotoxic potential.

Association of zinc ion release and oxidative stress induced by intratracheal instillation of ZnO nanoparticles to rat lung.

Zinc oxide (ZnO) nanoparticles are one of the important industrial nanoparticles. The production of ZnO nanoparticles is increasing every year. On the other hand, it is known that ZnO nanoparticles have strong cytotoxicity. In vitro studies using culture cells revealed that ZnO nanoparticles induce severe oxidative stress. However, the in vivo influence of ZnO nanoparticles is still unclear. In the present study, rat lung was exposed to ZnO nanoparticles by intratracheal instillation, and the influences of ZnO nanoparticles to the lung in the acute phase, particularly oxidative stress, were examined. Additionally, in vitro cellular influences of ZnO nanoparticles were examined using lung carcinoma A549 cells and compared to in vivo examinations. The ZnO nanoparticles used in this study released zinc ion in both dispersions. In the in vivo examinations, ZnO dispersion induced strong oxidative stress in the lung in the acute phase. The oxidative stress induced by the ZnO nanoparticles was stronger than that of a ZnCl(2) solution. Intratracheal instillation of ZnO nanoparticles induced an increase of lipid peroxide, HO-1 and alpha-tocopherol in the lung. The ZnO nanoparticles also induced strong oxidative stress and cell death in culture cells. Intracellular zinc level and reactive oxygen species were increased. These results suggest that ZnO nanoparticles induce oxidative stress in the lung in the acute phase. Intracellular ROS level had a high correlation with intracellular Zn(2+) level. ZnO nanoparticles will stay in the lung and continually release zinc ion, and thus stronger oxidative stress is induced.

Association of the physical and chemical properties and the cytotoxicity of metal oxide nanoparticles: metal ion release, adsorption ability and specific surface area.

Association of cellular influences and physical and chemical properties were examined for 24 kinds of industrial metal oxide nanoparticles: ZnO, CuO, NiO, Sb(2)O(3), CoO, MoO(3), Y(2)O(3), MgO, Gd(2)O(3), SnO(2), WO(3), ZrO(2), Fe(2)O(3), TiO(2), CeO(2), Al(2)O(3), Bi(2)O(3), La(2)O(3), ITO, and cobalt blue pigments. We prepared a stable medium dispersion for each nanoparticle and examined the influence on cell viability and oxidative stress together with physical and chemical characterizations. ZnO, CuO, NiO, MgO, and WO(3) showed a large amount of metal ion release in the culture medium. The cellular influences of these soluble nanoparticles were larger than insoluble nanoparticles. TiO(2), SnO(2), and CeO(2) nanoparticles showed strong protein adsorption ability; however, cellular influences of these nanoparticles were small. The primary particle size and the specific surface area seemed unrelated to cellular influences. Cellular influences of metal oxide nanoparticles depended on the kind and concentrations of released metals in the solution. For insoluble nanoparticles, the adsorption property was involved in cellular influences. The primary particle size and specific surface area of metal oxide nanoparticles did not affect directly cellular influences. In conclusion the most important cytotoxic factor of metal oxide nanoparticles was metal ion release.

Determination of chromium(III), chromium(VI) and total chromium in chromate and trivalent chromium conversion coatings by electrospray ionization mass spectrometry.

Developed were the determination methods of Cr(VI) and Cr(III) by electrospray ionization mass spectrometry, where HCrO(4)(-) (m/z 117) and [Cr(III)(cydta)](-) (m/z 394) were measured, respectively. Moreover, total Cr was also determined by measuring [Cr(III)(cydta)](-) after reduction of Cr(VI) with ascorbic acid. Here, cydta denotes trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid. The detection limits were ca. 13 nmol/dm(3) for Cr(VI) and 56 nmol/dm(3) for Cr(III) and total Cr. The proposed methods were applied to analyze chromate and trivalent chromium conversion coatings and gave consistent results with those obtained by a diphenylcarbazide spectrophotometric method for Cr(VI) and ICP-AES for total Cr.

Accurate Size and Size-Distribution Determination of Polystyrene Latex Nanoparticles in Aqueous Medium Using Dynamic Light Scattering and Asymmetrical Flow Field Flow Fractionation with Multi-Angle Light Scattering.

Accurate determination of the intensity-average diameter of polystyrene latex (PS-latex) by dynamic light scattering (DLS) was carried out through extrapolation of both the concentration of PS-latex and the observed scattering angle. Intensity-average diameter and size distribution were reliably determined by asymmetric flow field flow fractionation (AFFFF) using multi-angle light scattering (MALS) with consideration of band broadening in AFFFF separation. The intensity-average diameter determined by DLS and AFFFF-MALS agreed well within the estimated uncertainties, although the size distribution of PS-latex determined by DLS was less reliable in comparison with that determined by AFFFF-MALS.

Evaluation of cellular influences of platinum nanoparticles by stable medium dispersion.

Platinum nanoparticles have industrial application, for example in catalysis, and are used in consumer products such as cosmetics and supplements. Therefore, among the many nanoparticles, platinum is one of the more accessible nanoparticles for consumers. Most platinum nanoparticles that are used in cosmetics and supplements which have an anti-oxidant activity are modified particles. However, the cellular influences of pristine platinum nanoparticles are still unclear, although it has been reported that platinum nanoparticles induce oxidative stress. In this study, we investigated the cellular influences induced by pure pristine platinum nanoparticles. Platinum nanoparticles of 100% purity were dispersed in a cell culture medium and stable medium dispersion was obtained. The platinum nanoparticle medium dispersion was applied to two kinds of cultured cells, A549 and HaCaT cells, and the cellular influences were examined. Cell viability (MTT assay), cell proliferation (clonogenic assay), apoptosis induction (caspase-3 activity), intracellular ROS level (DCFH assay), and lipid peroxidation level (DPPP assay) were measured as markers of cellular influences. Transmission electron microscope observation showed cellular uptake of platinum nanoparticles. However, the platinum nanoparticles did not drive any markers. It is known that some metal oxide nanoparticles such as NiO and CuO show severe cytotoxicity via metal ion release. Compared with these toxic nanoparticles, the platinum nanoparticles used in this study did not release platinum ions into the culture media. These results suggest that the physically and chemically inactive cellular influences of platinum nanoparticles are small.

Development of a standard method for nanoparticle sizing by using the angular dependence of dynamic light scattering.

A standard method for nanoparticle sizing based on the angular dependence of dynamic light scattering was developed. The dependences of the diffusion coefficients for aqueous suspensions of polystyrene latex on the concentration and scattering angle were accurately measured by using a high-resolution dynamic light-scattering instrument. Precise measurements of the short-time correlation function at seven scattering angles and five concentrations were made for suspensions of polystyrene latex particles with diameters from 30 to 100 nm. The apparent diffusion coefficients obtained at various angles and concentrations showed properties characteristic of polystyrene latex particles with electrostatic interactions. A simulation was used to calculate a dynamic structure factor representing the long-range interactions between particles. Extrapolations to infinite dilution and to low angles gave accurate particle sizes by eliminating the effects of long-range interactions. The resulting particle sizes were consistent with those measured by using a differential mobility analyzer and those obtained by pulsed-field gradient nuclear magnetic resonance measurements.

Cellular responses induced by cerium oxide nanoparticles: induction of intracellular calcium level and oxidative stress on culture cells.

Cerium oxide (CeO(2)) is an important metal oxide used for industrial products. Many investigations about the cellular influence of CeO(2) nanoparticles have been done, but results are contradictory. It has been reported that CeO(2) nanoparticles have an anti-oxidative effect in cells, but it has also been reported that CeO(2) nanoparticles induce oxidative stress. We investigated the potential influence on cells and the mechanisms induced by CeO(2) nanoparticles in vitro. We prepared a stable CeO(2) culture medium dispersion. Cellular responses in CeO(2) medium-exposed cells were examined. Cellular uptake of CeO(2) nanoparticles was observed. After 24-h exposure, a high concentration of CeO(2) nanoparticles (∼200 mg/ml) induced an increase in the intracellular level of reactive oxygen species (ROS); a low concentration of CeO(2) nanoparticles induced a decrease in the intracellular ROS level. On the other hand, exposure of CeO(2) nanoparticle for 24 h had little influence on the cell viability. Exposure of CeO(2) nanoparticles increased the intracellular Ca(2+) concentration and also Calpain was activated. These results suggest that CeO(2) nanoparticles have a potential to induce intracellular oxidative stress and increase the intracellular Ca(2+) level, but these influences are small.

Evaluation of acute oxidative stress induced by NiO nanoparticles in vivo and in vitro.

OBJECTIVES: Nickel oxide (NiO) is an important industrial material, and it is also a harmful agent. The toxicity of NiO is size-related: nanoparticles are more toxic than fine-particles. The toxic mechanism induced by NiO nanoparticles remains unexplained, and the relationship between in vitro and in vivo NiO toxicity results is unclear. In the present study, we focused on the oxidative stress caused by NiO nanoparticles by examining and comparing in vitro and in vivo acute responses induced by NiO nanoparticles. METHODS: Cellular responses induced by black NiO nanoparticles with a primary particle size of 20 nm, were examined in human lung carcinoma A549 cells. In vivo responses were examined by instillation of NiO nanoparticles into rat trachea. Bronchoalveolar lavage fluid (BALF) was collected after intratracheal instillation at different time points, and concentrations of lipid peroxide heme oxygenase-1 (HO-1), surfactant protein-D (SP-D) and lactate dehydrogenase (LDH) in BALF were measured. RESULTS: The levels of intracellular reactive oxygen species and lipid peroxidation in A549 cells increased with increasing exposure to NiO nanoparticles, and increases in gene expressions of HO-1 and SP-D were observed in A549 cells. The lipid peroxide level in BALF significantly increased after 24 h instillation but decreased three days later. LDH leakage was also observed three days later. CONCLUSIONS: NiO nanoparticles induce oxidative stress-related lung injury. In vivo and in vitro oxidative stress was induced resulting in activation of antioxidant systems. Based on these responses, we conclude that the results of the in vivo and in vitro studies tend to correspond.

In vitro evaluation of cellular responses induced by stable fullerene C60 medium dispersion.

Because of the expansion of the functionalities available for modification of fullerene C60 and its derivatives, their uses are increasing. However, the consequences of fullerene exposure to human health have not been fully studied. In vitro experiments are useful for risk assessment and for understanding potential applications. However, the insolubility of pristine C60 in water makes the in vitro evaluation of cellular responses difficult. To overcome this problem, we prepared a stable and uniform C60-medium dispersion for in vitro examinations. In addition, we examined the effect of the C60-medium dispersion on human keratinocyte HaCaT cells and human lung carcinoma A549 cells to understand the cellular responses induced by exposure to C60. Results indicated that exposure to C60 did not affect cell viability; neither apoptosis nor necrosis were induced, while cell proliferation was inhibited. Furthermore, intracellular oxidative stress was induced by C60 exposure in both HaCaT and A549 cells. Transmission electron microscopy indicated the cellular uptake of C60 aggregates. The results obtained from this study indicate that C60 has oxidative stress induction potential. Further examinations including in vivo studies are necessary for a more accurate evaluation of biological influences by C60.

Cellular responses by stable and uniform ultrafine titanium dioxide particles in culture-medium dispersions when secondary particle size was 100 nm or less.

Even though there have been some investigations into cellular responses induced by ultrafine titanium dioxide (TiO(2)) in vitro, the relationship between cellular responses and secondary particle size is still not clear. In this study, a stable and uniform TiO(2)-cell culture-medium dispersion was prepared, and cellular responses prompted by "ultrafine secondary particles" were examined. The TiO(2)-DMEM-FBS dispersion included secondary particles in which the secondary particle size was 100 nm or less. In the present study, a "secondary particle" was defined as a complex aggregate of TiO(2) primary particles, proteins from FBS and other medium components. Secondary particle size did not influence the cell viability. The TiO(2)-DMEM-FBS dispersion introduced to the human keratinocyte HaCaT cells caused weak intracellular oxidative stress and apoptosis. The cellular influence of ultrafine TiO(2)in vitro is caused by the following mechanisms: (1) Secondary particles are formed. Ultrafine TiO(2) particles dispersed in medium immediately form secondary particles with proteins and salts. (2) "Ultrafine" secondary particles are taken up by the cells. The secondary particles reach the cells by diffusion and/or sedimentation and are taken up by the cells, through endocytosis. (3) Intracellular reactive oxygen species (ROS) level increases. Internalized secondary particles induce an increase in intracellular reactive oxygen species levels, although the secondary particles do not break up in the cell. In the case of ultrafine TiO(2), the increase of the intracellular ROS level was minimal. Moreover, the antioxidation system of cells such as glutathione was working. (4) Apoptotic cell death is induced. An accumulation of oxidative stress activates the apoptotic pathway (such as the caspase-3) and subsequently induces apoptotic cell death. After 24h of exposure to TiO(2), the percentage of apoptotic cells was only 6-7%. As a result, although the ultrafine TiO(2) particles induce some cellular responses, these cellular responses to ultrafine TiO(2) are weaker than those of other cytotoxic ultrafine metal oxide particles, such as nickel oxide.

Characterization of fullerene colloidal suspension in a cell culture medium for in vitro toxicity assessment.

To elucidate important parameters for in vitro toxicity assessment of C(60) and C(70) fullerene colloidal particles, experiments were carried out in culture medium using pulsed field gradient nuclear magnetic resonance (PFG-NMR), asymmetrical flow field-flow fractionation (AFFFF), and dynamic light scattering (DLS) methods. First, the amounts of total and bulk bovine serum albumin (BSA) molecules in C(60) and C(70) fullerene colloidal suspensions were determined using the PFG-NMR and AFFFF methods. Because the amount of bulk BSA molecules in the cell culture medium is a significant factor in inducing cell growth and because BSA can strongly adsorb onto the fullerene particles, this value is an important parameter for toxicological assessment. It was found that most of the BSA molecules are freely diffusing for both fullerene colloidal suspensions, at least in the range of fullerene concentration from 0.0025-0.15 mg mL(-1). Second, structural analysis of the fullerene colloidal nanoparticles was successfully performed using AFFFF-multi angle light scattering (MALS) and DLS methods. Based on the observed light scattering profiles obtained from a narrow size distribution of colloidal particles collected after AFFFF separation, it was estimated that the fullerene colloidal nanoparticles of both C(60) and C(70) did not adopt a hard spherical structure in the culture medium. The results from combined analysis using the AFFFF-MALS and DLS methods also supported this conclusion and indicated that the fullerene colloidal particles adopted a more flexible structure in culture medium. Since carbon nanomaterials with different geometric structures exhibit quite different cytotoxicity and bioactivity, these results are important for in vitro toxicity assessment.

Dispersion characteristics of various metal oxide secondary nanoparticles in culture medium for in vitro toxicology assessment.

The aim of this study is to characterize the dispersion characteristics of various metal oxide nanoparticles and secondary nanoparticle formation in culture medium. Many studies have already investigated the in vitro toxicities of various metal oxide nanoparticles; however, there have been few discussions about the particle transport mode to cells during a period of toxicity assessment. The particle transport mode would strongly affect the amount of uptake by cells; therefore, estimation of the transport mode for various metal oxide particles is important. Fourteen different metal oxide nanoparticle dispersions in a culture medium were examined. The sizes of the secondary nanoparticles were observed to be larger than 100 nm by dynamic light scattering (DLS). According to Stokes law and the Stokes-Einstein assumption, pure metal oxide particles with such sizes should gravitationally settle faster than diffusion processes; however, the secondary metal oxide particles examined in this study exhibited unexpectedly slower gravitational settling rates. The slow gravitational settling kinetics of particles was estimated to be caused by the inclusion of protein into the secondary nanoparticles, which resulted in lower densities than the pure metal oxide particles. The ratios of metal oxide to protein in secondary particles could be affected by the protein adsorption ability of the corresponding metal oxide primary particles. To the best of our knowledge, it was clarified for the first time that stably dispersed secondary metal oxide nanoparticles with slow gravitational settling kinetics are induced by secondary nanoparticles consisting of small amounts of metal oxide particles and large amounts of protein, which results in lower particle densities than the pure metal oxide particles. The estimation of particle dynamics in culture medium using this method would be significant to recognize the inherent toxicity of nanoparticles.