Investigating the hydration of C3A in the presence of the potentially toxic element chromium-a route to remediation?

Pollution by hexavalent chromium is a growing, global problem. Its presence in public water systems is often the result of industrial activities, both past and present. In this study, tricalcium aluminate (C3A, Ca3Al2O6) is added to solutions of varying concentrations of potassium chromate (K2CrO4) and samples of both the solid and liquid are taken at various time intervals to monitor the removal of chromium from the solutions. Solution concentrations of 0.2 M, 0.1 M, 0.02 M, and 0.01 M are used, and the chromium concentration is found to reduce in all cases. For the 0.02 M solution the chromium concentration is reduced from 1040 ppm to 3.1 ppm in 1 week, and the chromium concentration of the 0.01 M solution is reduced from 520 ppm to 0.26 ppm in only one day of reaction with the C3A. The chromium removed from solution is identified in the solid products, which were fully characterised as being a mixture of ettringite (Ca6[Al(OH)6]2(CrO4)3·26H2O) and monochromate (Ca4[Al(OH)6]2CrO4·8H2O) phases from analysis of Powder X-ray Diffraction and Fourier Transform Infrared Spectroscopy data. The work presented here is a proof of concept study to investigate C3A as a potential material for the removal of hexavalent chromium from solution. The results from this study are initial steps towards development of this as a technology for hexavalent chromium remediation.

Synthesis and spectroscopic identification of nickel and cobalt layered hydroxides and hydroxynitrates.

The formation of different nickel and cobalt layered hydroxide phases by a variety of solution and solid-state synthesis methods has been investigated. Initially, preparative methods were refined to generate single-phase products from metal(II) nitrate hexahydrate starting materials which were then characterised by powder X-ray diffraction, vibrational spectroscopy and thermogravimetric analysis. As well as the brucite type ß-M(OH)2 and the hydrotalcite-like [M(OH)2-x(H2O)x]x+ alpha-phases (where M = Ni, Co), two different hydroxynitrate phases were isolated with the generic formula M(OH)2-x(NO3)x with x = 0.67 and 1.0 (where M = Ni, Co). The reduction of symmetry of the nitrate anion from D3h to C2v allows the alpha-phases to be distinguished from the two different layered hydroxynitrate phases by both infrared and Raman spectroscopy through the loss of symmetry and concomitant splitting of the degenerate bands. The symmetric N-O stretch enables the two hydroxynitrate phases to be distinguished from one another through the sharp absorption bands at ca. 1000 cm-1 (x = 0.67) and ca. 1050 cm-1 (x = 1.0). The thermogravimetric analysis data of the phases showed key differences between the layered hydroxides, with anhydrous phases having singular weight losses over short temperature ranges and hydrated phases having multiple losses over more extended temperature ranges.

Locating hydrogen positions in the autunite mineral metatorbernite [Cu(UO2)2(PO4)2·8H2O]: a combined approach using neutron powder diffraction and computational modelling.

Metatorbernite [Cu(UO2)2(PO4)2·8H2O] is a promising remediation material for environmental uranium contamination. Previous X-ray diffraction studies have been unable to definitively locate hydrogen positions within metatorbernite, which are key to determining the hydrogen-bond network that helps to stabilize the structure. Here, hydrogen positions have been determined using a combination of neutron powder diffraction and the computational modelling technique ab initio random structure searching (AIRSS). Atomic coordinates determined through Rietveld analysis of neutron powder diffraction data are in excellent agreement with the minimum energy configuration predicted by AIRSS; thus, simulations confirm that our proposed model likely represents the global minimum configuration. Two groups of water molecules exist within the metatorbernite structure: free water and copper-coordinating water. Free water molecules are held within the structure by hydrogen bonding only, whilst the coordinating water molecules bond to copper in the equatorial positions to produce a 4 + 2 Jahn-Teller octahedra. The successful agreement between neutron powder diffraction data and AIRSS suggests that this combined approach has excellent potential for the study of other (trans)uranium materials in which hydrogen bonding plays a key role in phase stability.

Electrochromic and colorimetric properties of nickel(II) oxide thin films prepared by aerosol-assisted chemical vapor deposition.

Aerosol-assisted chemical vapor deposition (AACVD) was used for the first time in the preparation of thin-film electrochromic nickel(II) oxide (NiO). The as-deposited films were cubic NiO, with an octahedral-like grain structure, and an optical band gap that decreased from 3.61 to 3.48 eV on increase in film thickness (in the range 500-1000 nm). On oxidative voltammetric cycling in aqueous KOH (0.1 mol dm(-3)) electrolyte, the morphology gradually changed to an open porous NiO structure. The electrochromic properties of the films were investigated as a function of film thickness, following 50, 100, and 500 conditioning oxidative voltammetric cycles in aqueous KOH (0.1 mol dm(-3)). Light modulation of the films increased with the number of conditioning cycles. The maximum coloration efficiency (CE) for the NiO (transmissive light green, the "bleached" state) to NiOOH (deep brown, the colored state) electrochromic process was found to be 56.3 cm(2) C(-1) (at 450 nm) for films prepared by AACVD for 15 min followed by 100 "bleached"-to-colored conditioning oxidative voltammetric cycles. Electrochromic response times were <10 s and generally longer for the coloration than the bleaching process. The films showed good stability when tested for up to 10 000 color/bleach cycles. Using the CIE (Commission Internationale de l'Eclairage) system of colorimetry the color stimuli of the electrochromic NiO films and the changes that take place on reversibly oxidatively switching to the NiOOH form were calculated from in situ visible spectra recorded under electrochemical control. Reversible changes in the hue and saturation occur on oxidation of the NiO (transmissive light green) form to the NiOOH (deep brown) form, as shown by the track of the CIE 1931 xy chromaticity coordinates. As the NiO film is oxidized, a sharp decrease in luminance was observed. CIELAB L*a*b* coordinates were also used to quantify the electrochromic color states. A combination of a low L* and positive a* and b* values quantified the perceived deep brown colored state.

Li(+) ion conductivity in rock salt-structured nickel-doped Li(3)NbO(4).

Two mechanisms of doping Li(3)NbO(4), which has an ordered, rock salt superstructure, have been established. In the "stoichiometric mechanism", the overall cation-to-anion ratio is maintained at 1:1 by means of the substitution 3Li(+) + Nb(5+) --> 4Ni(2+). In the "vacancy mechanism", Li(+) ion vacancies are created by means of the substitution 2Li(+) --> Ni(2+). Solid solution ranges have been determined for both mechanisms and a partial phase diagram constructed for the stoichiometric join. On the vacancy join, the substitution mechanism has been confirmed by powder neutron diffraction; associated with lithium vacancy creation, a dramatic increase in Li(+) ion conductivity occurs with increasing Ni content, reaching a value of 5 x 10(-4) Omega(-1) cm(-1) at 300 degrees C for composition x= 0.1 in the formula Li(3-2x)Ni(x)NbO(4). This is the first example of high Li(+) ion conductivity in complex oxides with rock salt-related structures.