Carrier Extraction from Perovskite to Polymeric Charge Transport Layers Probed by Ultrafast Transient Absorption Spectroscopy.

The efficiency of state-of-the-art perovskite solar cells is limited by carrier recombination at defects and interfaces. Thus, understanding these losses and how to reduce them is the way forward toward the Shockley-Queisser limit. Here, we demonstrate that ultrafast transient absorption spectroscopy can directly probe hole extraction and recombination dynamics at perovskite/hole transport layer (HTL) interfaces. To illustrate this, we employed PDPP-3T as HTL because its ground-state absorption is at lower energy than the perovskite's photobleach, enabling direct monitoring of interfacial hole extraction and recombination. Moreover, by fitting the carrier dynamics using a diffusion model, we determined the carrier mobility. Afterwards, by varying the perovskite thickness, we distinguished between carrier diffusion and carrier extraction at the interface. Lastly, we prepared device-like structures, TiO2/perovskite/PDPP-3T stacks, and observed reduced carrier recombination in the perovskite. From PDPP-3T carrier dynamics, we deduced that hole extraction is one order faster than recombination of holes at the interface.

Dithiopheneindenofluorene (TIF) Semiconducting Polymers with Very High Mobility in Field-Effect Transistors.

The charge-carrier mobility of organic semiconducting polymers is known to be enhanced when the energetic disorder of the polymer is minimized. Fused, planar aromatic ring structures contribute to reducing the polymer conformational disorder, as demonstrated by polymers containing the indacenodithiophene (IDT) repeat unit, which have both a low Urbach energy and a high mobility in thin-film-transistor (TFT) devices. Expanding on this design motif, copolymers containing the dithiopheneindenofluorene repeat unit are synthesized, which extends the fused aromatic structure with two additional phenyl rings, further rigidifying the polymer backbone. A range of copolymers are prepared and their electrical properties and thin-film morphology evaluated, with the co-benzothiadiazole polymer having a twofold increase in hole mobility when compared to the IDT analog, reaching values of almost 3 cm2 V-1 s-1 in bottom-gate top-contact organic field-effect transistors.

Synthesis of a conjugated pyrrolopyridazinedione-benzodithiophene (PPD-BDT) copolymer and its application in organic and hybrid solar cells.

ABSTRACT: Herein, we describe the synthesis and characterization of a conjugated donor-acceptor copolymer consisting of a pyrrolopyridazinedione (PPD) acceptor unit, and a benzodithiophene (BDT) donor unit. The polymerization was done via a Stille cross-coupling polycondensation. The resulting PPD-BDT copolymer revealed an optical bandgap of 1.8 eV and good processability from chlorobenzene solutions. In an organic solar cell in combination with PC70BM, the polymer led to a power conversion efficiency of 4.5%. Moreover, the performance of the copolymer was evaluated in polymer/nanocrystal hybrid solar cells using non-toxic CuInS2 nanocrystals as inorganic phase, which were prepared from precursors directly in the polymer matrix without using additional capping ligands. The PPD-BDT/CuInS2 hybrid solar cells showed comparably high photovoltages and a power conversion efficiency of 2.2%.

A thieno[3,2-b][1]benzothiophene isoindigo building block for additive- and annealing-free high-performance polymer solar cells.

A novel photoactive polymer with two different molecular weights is reported, based on a new building block: thieno[3,2-b][1]benzothiophene isoindigo. Due to the improved crystallinity, optimal blend morphology, and higher charge mobility, solar-cell devices of the high-molecular-weight polymer exhibit a superior performance, affording efficiencies of 9.1% without the need for additives, annealing, or additional extraction layers during device fabrication.

Chalcogenophene comonomer comparison in small band gap diketopyrrolopyrrole-based conjugated polymers for high-performing field-effect transistors and organic solar cells.

The design, synthesis, and characterization of a series of diketopyrrolopyrrole-based copolymers with different chalcogenophene comonomers (thiophene, selenophene, and tellurophene) for use in field-effect transistors and organic photovoltaic devices are reported. The effect of the heteroatom substitution on the optical, electrochemical, and photovoltaic properties and charge carrier mobilities of these polymers is discussed. The results indicate that by increasing the size of the chalcogen atom (S < Se < Te), polymer band gaps are narrowed mainly due to LUMO energy level stabilization. In addition, the larger heteroatomic size also increases intermolecular heteroatom-heteroatom interactions facilitating the formation of polymer aggregates leading to enhanced field-effect mobilities of 1.6 cm(2)/(V s). Bulk heterojunction solar cells based on the chalcogenophene polymer series blended with fullerene derivatives show good photovoltaic properties, with power conversion efficiencies ranging from 7.1-8.8%. A high photoresponse in the near-infrared (NIR) region with excellent photocurrents above 20 mA cm(-2) was achieved for all polymers, making these highly efficient low band gap polymers promising candidates for use in tandem solar cells.

A rhodanine flanked nonfullerene acceptor for solution-processed organic photovoltaics.

A novel small molecule, FBR, bearing 3-ethylrhodanine flanking groups was synthesized as a nonfullerene electron acceptor for solution-processed bulk heterojunction organic photovoltaics (OPV). A straightforward synthesis route was employed, offering the potential for large scale preparation of this material. Inverted OPV devices employing poly(3-hexylthiophene) (P3HT) as the donor polymer and FBR as the acceptor gave power conversion efficiencies (PCE) up to 4.1%. Transient and steady state optical spectroscopies indicated efficient, ultrafast charge generation and efficient photocurrent generation from both donor and acceptor. Ultrafast transient absorption spectroscopy was used to investigate polaron generation efficiency as well as recombination dynamics. It was determined that the P3HT:FBR blend is highly intermixed, leading to increased charge generation relative to comparative devices with P3HT:PC60BM, but also faster recombination due to a nonideal morphology in which, in contrast to P3HT:PC60BM devices, the acceptor does not aggregate enough to create appropriate percolation pathways that prevent fast nongeminate recombination. Despite this nonoptimal morphology the P3HT:FBR devices exhibit better performance than P3HT:PC60BM devices, used as control, demonstrating that this acceptor shows great promise for further optimization.

Intramolecular excimer formation between 3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione chromophoric groups linked by a flexible alkyl spacer.

Bichromophoric molecules containing two 3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DPP) moieties linked via aliphatic spacers of different length are synthesized. Optical absorption spectroscopy indicates that the molecules adopt an extended conformation in solution. Fluorescence spectroscopy shows that photons are emitted from the locally excited singlet state in an extended conformation. In sufficiently polar solvents, quenching of fluorescence occurs and fluorescence quantum yield (ΦF) and fluorescence lifetime (τF) measurements indicate formation of an intramolecular excimer as the quenching mechanism. The redox potentials of the molecules and the solvent polarity dependence of the quenching are consistent with significant charge-transfer character of the excimer state. Photoinduced absorption measurements show enhanced intersystem crossing to the triplet state in polar solvents. Results indicate that in donor-acceptor π-conjugated materials involving the DPP moiety, excimer-like interchain polaron pair excited states could play an important role in the photophysics because of their close proximity in energy to the lowest singlet excited state.

Synthesis and optical properties of pyrrolo[3,2-b]pyrrole-2,5(1H,4H)-dione (iDPP)-based molecules.

We describe the synthesis and photophysical properties of a series of derivatives of pyrrolo[3,2-b]pyrrole-2,5(1H,4H)-dione-3,6-diyl (iDPP) linked to two oligothiophenes of variable length (nT). The iso-DPP-oligothiophenes (iDPPnTs) differ from the common pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione-3,6-diyl-oligothiophene analogues (DPPnTs) by a different orientation of the two lactam rings in the bicyclic iDPP unit compared to DPP. In contrast to the highly fluorescent DPPnTs, the new isomeric iDPPnTs exhibit only very weak fluorescence. We demonstrate with the help of quantum-chemical calculations that this can be attributed to a different symmetry of the lowest excited state in iDPPnT (A in C2 symmetry) compared to DPPnTs (B) and the corresponding loss in oscillator strength of the lowest energy transition. Upon extending the oligothiophene moiety in the iDPPnTs molecules, the charge transfer character of the lowest A excited state becomes more pronounced. This tends to preclude high fluorescence quantum yields even in extended iDPPnTs systems.

Photophysics of self-assembled monolayers of a π-conjugated quinquethiophene derivative.

The photophysics of fully and partially covered self-assembled monolayers (SAMs) of a quinquethiophene (5T) derivative have been investigated. The monolayers behave as H-aggregates. The fluorescence of fully covered SAMs is weak and red-shifted, and the extinction is blue-shifted as compared to that of single molecules. The fluorescence of partially covered SAMs is dominated by that of single molecules on the surface. The extinction spectra are similar for fully and partially covered monolayers, which show that even the smallest islands are H-aggregates. The extinction spectra furthermore closely resemble those for 5T single crystals, which demonstrates that in oligothiophene crystals the intermolecular interactions within one layer molecules are stronger than the interlayer electronic coupling.

Optical properties of oligothiophene substituted diketopyrrolopyrrole derivatives in the solid phase: joint J- and H-type aggregation.

Photophysical properties of diketopyrrolopyrrole derivatives substituted with oligothiophenes are investigated. All compounds are found to be fluorescent both in solution and in the solid phase. At low temperature in the solid, fluorescence originates from excimer-like excited states. Comparison of absorption and fluorescence excitation spectra taken under matrix isolated conditions and on solid films show the presence of both J- and H-type absorption bands in the solid phase. Quantum-chemical calculations, including exciton-phonon coupling to account for deviations from the Born-Oppenheimer approximation, are performed to simulate the band shape of the lowest absorption band in the molecular solid. The joint presence of J- and H-bands is explained by the presence of two molecules in the unit cell. The Davydov splitting is substantial for molecules with linear alkyl substituents on the nitrogen atom (on the order of 0.2 eV) but can be reduced to almost zero by introducing branching at the ß-carbon of the alkyl side chain.