Studies on the behaviour and control of phlebotomine sandflies using experimental houses.

Programmes for the control of phlebotomine sandflies (Diptera: Psychodidae), the vectors of leishmaniases, mainly target adults because larval breeding sites are generally unknown or inaccessible. To determine how blood-questing sandfly females enter homes and to develop means for their control, an experimental house (EH) was constructed in a village endemic for cutaneous leishmaniasis. Initially, carbon dioxide (CO2 )-baited suction traps were installed inside the EH to attract and capture sandflies. For other experiments, the windows of the EH were fitted with CO2 -baited window entrance traps (WETs) that allow each window to be considered as a separate unit. The majority of captures inside the EH and in WETs consisted of Phlebotomus sergenti, a species that enters inhabited houses relatively infrequently. Analyses of collections in WETs and in sticky traps on external walls showed that sandflies entered windows having landed previously on the wall below or either side of the window. Shelves constructed below windows significantly reduced the numbers of sandflies that entered both the EH and inhabited houses. The lining of internal walls with insecticide-impregnated fabric significantly increased mortality rates of sandflies captured inside the EH. To reduce the biting burden imposed by phlebotomine sandflies, several control measures must be integrated and sustained.

Force chains in monodisperse spherical particle assemblies: three-dimensional measurements using neutrons.

The full triaxial stress state within individual particles in a monodisperse spherical granular assembly has been measured. This was made possible by neutron imaging and computed tomography combined with neutron diffraction strain measurement techniques and associated stress reconstruction. The assembly in question consists of 549 precision steel ball bearings under an applied axial load of 85 MPa in a cylindrical die. Clear evidence of force chains was observed in terms of both the shape of the probability distribution function for normal stresses and the network formed by highly loaded particles. An extensive analysis of the source and magnitude of uncertainty in these measurements is also presented.

Exclusion of phlebotomine sand flies from inhabited areas by means of vertical mesh barriers.

Vector control constitutes an important component of integrated disease control campaigns. Source reduction is not an option for phlebotomine sand fly vectors of leishmaniasis, because larval breeding sites remain either unknown or inaccessible. Thus, all control efforts are directed against the adult sand flies, mostly attempting to limit their contact with humans. We describe experiments using an insecticide-treated vertical barrier to prevent sand flies from reaching inhabited areas of an agricultural settlement. A 400 meter long section of the peripheral fence of Kibbutz Sde Eliyahu, Jordan Valley, Israel was draped with a deltamethrin-impregnated net that is impenetrable to sand flies (polyester net, 450 holes/inch(2)). Sand flies were captured before and after construction of the barrier using CO(2)-baited CDC traps. Sand fly numbers, as monitored around three houses internal to the barrier, exhibited an 84.9% decrease once the barrier was erected (P=0.003). Concurrently, the neighboring control group of three houses, not protected by the barrier, exhibited a 15.9% increase in sand fly numbers (P=0.974). These results corroborate previous findings of field tests conducted on a smaller scale in an arid suburban setting. Campaigns for reducing the burden of sand fly bites and curtailing the transmission of leishmaniasis, should consider integrating vertical fine-mesh nets with other sand fly control measures.

Studies on the flight patterns of foraging sand flies.

Phlebotomine sand flies transmit Leishmania parasites that cause leishmaniasis in humans. We report experimental results that improve our understanding of how foraging sand flies proceed over flat or sloping ground and how they negotiate vertical obstacles. Three rows of traps were suspended at different heights on a wire fence. Those just above ground level captured 87% of all flies, traps set at one meter captured 11% while only 2% of the flies were captured in traps set two meters above ground. When traps were deployed on a vertical support wall, the mean catch per trap was much higher than for traps suspended on the fence. Traps suspended just above ground level captured 57% of all flies, traps set at one meter above ground captured 27% of the flies and even traps set at two meters captured 16% of the flies. Although, most flies were still captured close to the ground, a higher percentage reached the second and third rows of traps. Sticky traps on a vertical wall produced similar results with significantly more flies alighting on the lower sections of the trap closest to the ground. On a vertical sand fly-proof net the overall dispersal of the flies was more like on a wall than in open space. Traps suspended just above ground level captured 49%, traps set at one meter above ground captured 36% and traps set at two meters captured 15% of the flies. Following spraying of the net with deltamethrin (1%), fewer sand flies were captured but the reduction was not statistically significant. Our conclusions are that being small and frail, sand flies tend to fly close to the ground probably in order to avoid being swept away by gusts of wind. When they encounter a vertical obstacle, they proceed upwards close to the obstacle with intermittent stops. Therefore, insecticide-sprayed walls or vertical nets should be effective for controlling sand flies approaching human habitation.

Shear stiffness in nanolaminar Ti3SiC2 challenges ab initio calculations.

Nanolaminates such as the M(n + 1)AX(n) (MAX) phases are a material class with ab initio derived elasticity tensors published for over 250 compounds. We have for the first time experimentally determined the full elasticity tensor of the archetype MAX phase, Ti(3)SiC(2), using polycrystalline samples and in situ neutron diffraction. The experimental elastic constants show extreme shear stiffness, with c(44) more than five times greater than expected for an isotropic material. Such shear stiffness is quite rare in hexagonal materials and strongly contradicts the predictions of all published MAX phase elastic constants derived from ab initio calculations. It is concluded that second order properties such as elastic moduli derived from ab initio calculations require careful experimental verification. The diffraction technique used currently provides the only method of verification for the elasticity tensor for the majority of new materials where single crystals are not available.

Rotational dynamics and coupling of methyl group rotations in methyl fluoride studied by high resolution inelastic neutron scattering.

Methyl group rotations in methyl fluoride were studied using the high flux backscattering spectrometer SPHERES at FRM-II. The asymmetry and width of the low temperature tunneling peak was used to determine if coupled rotations between neighboring methyl fluoride molecules exist. The temperature dependent broadening of the tunneling peak was used to determine the first librational transition and compared to the temperature dependent shift of the position of the tunneling peak. The results obtained by using inelastic neutron scattering confirm previous models that assume rotational coupling. This is the first neutron backscattering experiment with sub-microeV resolution at energy transfers up to 31 microeV.

Quasielastic neutron scattering experiments including activation energies and mathematical modeling of methyl halide dynamics.

Quasielastic neutron scattering experiments were carried out using the multichopper time-of-flight spectrometer V3 at the Hahn-Meitner Institut, Germany and the backscattering spectrometer at Forschungszentrum Julich, Germany. Activation energies for CH(3)X, X=F, Cl, Br, and I, were obtained. In combination with results from previous inelastic neutron scattering experiments the data were taken to describe the dynamics of the halides in terms of two different models, the single particle model and the coupling model. Coupled motions of methyl groups seem to explain the dynamics of the methyl fluoride and chloride; however, the coupling vanishes with the increase of the mass of the halide atom in CH(3)Br and CH(3)I.

Rotational dynamics of methyl groups in m-xylene.

Methyl group dynamics of m-xylene was investigated by using incoherent inelastic and quasi-elastic neutron scattering. Inelastic measurements were carried out at the high flux backscattering spectrometer HFBS at the National Institute of Standards, quasi-elastic measurements at the time-of-flight spectrometer NEAT at the Hahn-Meitner-Institute. Rotational potentials are derived which describe the tunnel splittings, first librational, and activation energies of the two inequivalent CH(3) groups. Indications for coupling of the methyl rotation to low-energy phonons have been found. The finite width of one tunneling transition at He temperature is described by direct methyl-methyl coupling. The combined results of the experiments and the calculations allow a unique assignment of rotor excitations to crystallographic sites.

The lattice and rotational dynamics of the methyl halides described by pair potentials based on universal force fields.

A systematical computational study of the lattice and rotational dynamics of the methyl halides, which belong to the most simple organic molecules containing CH(3) groups, was done. Because of their simplicity there might be a chance to understand and model the dynamics of these systems by combining nonbonded pair interactions and crystallographic information. Based on the experimentally determined crystal structure, which was not relaxed during the calculations, interactions were modeled using the transferable parameters of the universal force fields. The lattice dynamical calculation can reproduce with reasonable accuracy the low-energy regime of the lattice excitations as well as the single-particle rotational potential of the CH(3) group of the respective halide.