At Least 10-fold Higher Lubricity of Molecularly Thin D2O vs H2O Films at Single-Layer Graphene-Mica Interfaces.

Interfacial water is a widespread lubricant down to the nanometer scale. We investigate the lubricities of molecularly thin H2O and D2O films confined between mica and graphene, via the relaxation of initially applied strain in graphene employing Raman spectroscopy. Surprisingly, the D2O films are at least 1 order of magnitude more lubricant than H2O films, despite the similar bulk viscosities of the two liquids. We propose a mechanism based on the known selective permeation of protons vs deuterons through graphene. Permeated protons and left behind hydroxides may form ion pairs clamping across the graphene sheet and thereby hindering the graphene from sliding on the water layer. This explains the lower lubricity but also the hindering diffusivity of the water layer, which yields a high effective viscosity in accordance with findings in dewetting experiments. Our work elucidates an unexpected effect and provides clues to the behavior of graphene on hydrous surfaces.

Nucleation, growth, and dissolution of silver nanostructures formed in nanotubular J-aggregates of amphiphilic cyanine dyes.

Solution fabricated high aspect ratio silver nanowires are of interest because of their usability in plasmonic devices or transparent electrodes. Recently, silver nanowires with diameters of 6.5 nm and lengths exceeding tens or hundreds of microns were grown by reduction of silver ions within the inner volume of nanotubular J-aggregates of an amphiphilic cyanine dye. Unlike in other soft template systems, the anisotropic growth of the silver wires is not caused by different screening of the diverse facets of silver crystals. Instead, the shape of the wires replicates the inner space of the tubes without destroying the template. This effect is demonstrated by ex-situ observation of the growth of the silver wires via transmission electron microscopy. The wire growth is initiated by exposure to blue light and starts with small, isolated crystallites within the tubular aggregates. The crystallites grow into pieces of wires that finally coalesce into continuous wires. The growth is mediated by material transport through the membrane-like wall of the dye aggregates. This wall permeability is further demonstrated by dissolution of the silver wires via oxidative etching by addition of sodium chloride. It is concluded that the cyanine double layer wall is permeable for ions such as silver, sodium, chlorine, and water molecules. This permeability permits control of the wire length through the concentration of chlorine when oxygen is removed from the solvent.

Nanohybrids from nanotubular J-aggregates and transparent silica nanoshells.

Organic-inorganic nanohybrids have been synthesized by in situ coating supramolecular nanotubular J-aggregates with helically wound silica ribbons, reflecting the J-aggregates' superstructure. The J-aggregates retain their morphology and optical properties in the nanohybrids, and display improved stability against elevated temperatures, chemical ambient and photo-bleaching.

Nanotubular J-aggregates and quantum dots coupled for efficient resonance excitation energy transfer.

Resonant coupling between distinct excitons in organic supramolecular assemblies and inorganic semiconductors is supposed to offer an approach to optoelectronic devices. Here, we report on colloidal nanohybrids consisting of self-assembled tubular J-aggregates decorated with semiconductor quantum dots (QDs) via electrostatic self-assembly. The role of QDs in the energy transfer process can be switched from a donor to an acceptor by tuning its size and thereby the excitonic transition energy while keeping the chemistry unaltered. QDs are located within a close distance (<4 nm) to the J-aggregate surface, without harming the tubular structures and optical properties of J-aggregates. The close proximity of J-aggregates and QDs allows the strong excitation energy transfer coupling, which is around 92% in the case of energy transfer from the QD donor to the J-aggregate acceptor and approximately 20% in the reverse case. This system provides a model of an organic-inorganic light-harvesting complex using methods of self-assembly in aqueous solution, and it highlights a route toward hierarchical synthesis of structurally well-defined supramolecular objects with advanced functionality.

Site-dependence of van der Waals interaction explains exciton spectra of double-walled tubular J-aggregates.

The simulation of the optical properties of supramolecular aggregates requires the development of methods, which are able to treat a large number of coupled chromophores interacting with the environment. Since it is currently not possible to treat large systems by quantum chemistry, the Frenkel exciton model is a valuable alternative. In this work we show how the Frenkel exciton model can be extended in order to explain the excitonic spectra of a specific double-walled tubular dye aggregate explicitly taking into account dispersive energy shifts of ground and excited states due to van der Waals interaction with all surrounding molecules. The experimentally observed splitting is well explained by the site-dependent energy shift of molecules placed at the inner or outer side of the double-walled tube, respectively. Therefore we can conclude that inclusion of the site-dependent dispersive effect in the theoretical description of optical properties of nanoscaled dye aggregates is mandatory.

Photoinitiated growth of sub-7 nm silver nanowires within a chemically active organic nanotubular template.

Self-assembled supramolecular nanotubes of J-aggregated amphiphilic cyanine dye in aqueous solution are employed as chemically active templates for the photoinitiated formation of silver nanowires with a very small and homogeneous diameter of (6.4 +/- 0.5) nm. Key features of the template are (1) its small and well-defined diameter; (2) its photochemical activity, which allows photoinitiation of the structure formation; and (3) the processability in aqueous solution. The latter includes the potential to remove the template after the reaction, or to functionalize it further, e.g. with optoelectronically active polycations, providing access to quasi one-dimensional hybrid structures with well-defined metallic nanowires as a core.

Uniform exciton fluorescence from individual molecular nanotubes immobilized on solid substrates.

Self-assembled quasi one-dimensional nanostructures of pi-conjugated molecules may find a use in devices owing to their intriguing optoelectronic properties, which include sharp exciton transitions, strong circular dichroism, high exciton mobilities and photoconductivity. However, many applications require immobilization of these nanostructures on a solid substrate, which is a challenge to achieve without destroying their delicate supramolecular structure. Here, we use a drop-flow technique to immobilize double-walled tubular J-aggregates of amphiphilic cyanine dyes without affecting their morphological or optical properties. High-resolution images of the topography and exciton fluorescence of individual J-aggregates are obtained simultaneously with polarization-resolved near-field scanning optical microscopy. These images show remarkably uniform supramolecular structure, both along individual nanotubes and between nanotubes in an ensemble, demonstrating their potential for light harvesting and energy transport.

Modification of the nanoscale structure of the J-aggregate of a sulfonate-substituted amphiphilic carbocyanine dye through incorporation of surface-active additives.

The amphiphilic dye 3,3'-bis(2-sulfopropyl)-5,5',6,6'-tetrachloro-1,1'-dioctylbenzimidacarbocyanine (C8S3) self-aggregates in aqueous solution to form tubular J-aggregates with a diameter of 17.0 +/- 0.5 nm, a wall thickness of approximately 4 nm, and a length exceeding several hundred nanometers. The absorption spectrum shows the typical features expected for tubular J-aggregates with several sharp and red-shifted absorption bands. Morphological investigations using cryo-transmission electron microscopy (cryo-TEM) and spectroscopic investigations reveal a high stability of the tubular morphology but a tendency of the aggregates to assemble into ropelike bundles after several weeks of storage. It is found that aggregation in solutions containing additives such as alcohols or surfactants results in the formation of new types of aggregates. A second type of tubular aggregate with a diameter of 13.0 +/- 0.5 nm is observed when the solutions contain more than 10 wt % MeOH. On the time scale of days these tubular aggregates transform into ribbonlike structures characterized by a new absorption spectrum, and they convert after several weeks into giant tubes with diameters of up to 500 nm.

Engineering of layer-by-layer coated capsules with the prospect of materials for efficient and directed electron transfer.

Intermolecular electron transfer is investigated in a dye-doped polyelectrolyte (PE) multilayer film. Hollow PE capsules, with a mean diameter of 2 microm, were prepared by stepwise adsorption of a pyrene (PY)-labeled polyanion and various polycations onto charged colloids and subsequent dissolution of the colloidal core. The high concentration of dye molecules within the capsule wall and the control of the medium polarity on a nanometer length scale are proposed to facilitate light-induced charge separation over distances of a few nanometers. In particular, a PY-labeled poly(styrene sulfonate) (PSS-PY) has been synthesized and used as polyanion for the polyelectrolyte capsule preparation. A polarity gradient across the wall of the PE shells is assumed to be achieved by adsorbing diverse polycations at different film positions. The high effective film area followed by high optical density of the PE capsule solution enables time-resolved optical spectroscopy. Using pulsed excited state absorption (ESA) the transient absorption peaks of the radical anion and cation state of pyrene were measured, respectively. In the presence of additional electron donor (or acceptor) molecules in the capsule solution the pyrene anion (cation) is observed in the ESA spectra, while both transient states are seen if no additional molecules are present. These results are interpreted as an electron transfer from pyrene to the donor (acceptor) molecule or between two pyrene molecules. An asymmetry of the electron donor and electron acceptor efficiency was observed when multilayer shells were used that are supposed to carry an internal polarity gradient.