Fs Laser Patterning of Amorphous As2S3 Thin Films.

This study investigates the morphological changes induced by femtosecond (fs) laser pulses in arsenic trisulfide (As2S3) thin films and gold-arsenic trisulfide (Au\As2S3) heterostructures, grown by pulsed laser deposition (PLD). By means of a direct laser writing experimental setup, the films were systematically irradiated at various laser power and irradiation times to observe their effects on surface modifications. AFM was employed for morphological and topological characterization. Our results reveal a clear transition threshold between photoexpansion and photoevaporation phenomena under different femtosecond laser power regimes, occurring between 1 and 1.5 mW, irrespective of exposure time. Notably, the presence of a gold layer in the heterostructure minimally influenced this threshold. A maximum photoexpansion of 5.2% was obtained in As2S3 films, while the Au\As2S3 heterostructure exhibited a peak photoexpansion of 0.8%. The study also includes a comparative analysis of continuous-wave (cw) laser irradiation, confirming the efficiency of fs laser pulses in inducing photoexpansion effects.

Effect of Emotional Valence on Emotion Recognition in Adolescents with Autism Spectrum Disorder.

This study investigated how emotional valence of a perceived emotional state impacted performance on the Reading the Mind in the Eyes task (RMET) in adolescents with autism spectrum disorder (ASD) and typically developing (TD) controls. Valence of items on the RMET, Adult (RMET-A) and Child (RMET-C) versions, was first classified in a survey of 113 medical students. Adolescents with ASD (N = 33) and TD adolescents (N = 30) were administered both RMET versions. Individuals with ASD made more errors than TD controls on positive and negative, but not neutral, valence items. The difference in performance was accentuated on the RMET-A compared to the RMET-C. Both emotional valence and complexity of language contribute to RMET performance in individuals with ASD.

Development and Evaluation of Copper Based Transparent Heat Reflectors Obtained by Magnetron Sputtering.

Within the next few years climate change is likely to become a major concern for mankind. In addition, the current electronic components shortage crisis has led to an urgent need for alternative solutions in the main industry sectors (the raw materials, manufacturing, and construction industries). The current trends of research are focused on developing smart materials with functional properties, using abundant raw materials. The energy saving efforts are sustained in the glazing industries by several approaches based on dielectric-metal-dielectric multilayer structures. The use of silver to achieve a high reflectivity in near-infrared spectral range has been proposed and is already adopted as a commercially available solution. This work is focused on developing a transparent heat reflector (THR) with prefigured optical properties, using copper as a reflective layer, a material that is more abundant and cheaper than silver. The conductive copper layers obtained by the High Power Impulse Magnetron Sputtering (HiPIMS) method were interposed between two silicon nitride layers deposited by the Radio-Frequency Magnetron Sputtering (RFMS) technique. The structural, optical, and elemental composition of monolayers was investigated, qualifying each individual material for use in the multilayer structure. The time stability of films deposited on microscope glass substrates was also investigated, as an important criterion for the selection of monolayers. The obtained results revealed that the SiNx/Cu/SiNx with the Cu layer deposited by using a negative substrate bias of -100 V showed the most stable behavior over time. Optical modeling was performed to design a THR multilayer structure, which was successfully obtained experimentally. A maximum optical transparency as high as 75% in the visible range and a reflectivity of ~ 85% in near infrared spectral interval was confirmed for the experimentally obtained multilayer structures.

Synthesis and Investigation of Antibacterial Activity of Thin Films Based on TiO2-Ag and SiO2-Ag with Potential Applications in Medical Environment.

Multiple antibiotic resistance has now become a major obstacle to the treatment of infectious diseases. In this context, the application of nanotechnology in medicine is a promising alternative for the prevention of infections with multidrug-resistant germs. The use of silver as a powerful antibacterial agent has attracted much interest. TiO2 and SiO2 thin films enhanced with Ag particles have been developed with the aim of maintaining the transparency of the polymer films. Antibacterial activity was evaluated for a Gram-negative species-Escherichia coli-in concentrations of 105 and 104 CFU/mL in different conditions-activation by UV irradiation, single layer and double layer. Increased antibacterial efficacy of TiO2-deposited foil was found for the tests that had been exposed to UV activation. In the case of bilayer tests, the efficiency was higher compared to those in a single layer, as the contact surface between the films and the bacterial suspension increased. Films can be used as a potential method to limit bacterial growth on hospital surfaces, such as telephone screens and medical equipment, given their optimized characteristics and proven antibacterial efficacy.

Current Limitations of Intraoperative Ultrasound in Brain Tumor Surgery.

While benefits of intraoperative ultrasound (IOUS) have been frequently described, data on IOUS limitations are relatively sparse. Suboptimal ultrasound imaging of some pathologies, various types of ultrasound artifacts, challenging patient positioning during some IOUS-guided surgeries, and absence of an optimal IOUS probe depicting the entire sellar region during transsphenoidal pituitary surgery are some of the most important pitfalls. This review aims to summarize prominent limitations of current IOUS systems, and to present possibilities to reduce them by using ultrasound technology suitable for a specific procedure and by proper scanning techniques. In addition, future trends of IOUS imaging optimization are described in this article.

Close-range vocal interaction in the common marmoset (Callithrix jacchus).

Vocal communication in animals often involves taking turns vocalizing. In humans, turn-taking is a fundamental rule in conversation. Among non-human primates, the common marmoset is known to engage in antiphonal calling using phee calls and trill calls. Calls of the trill type are the most common, yet difficult to study, because they are not very loud and uttered in conditions when animals are in close proximity to one another. Here we recorded trill calls in captive pair-housed marmosets using wearable microphones, while the animals were together with their partner or separated, but within trill call range. Trills were exchanged mainly with the partner and not with other animals in the room. Animals placed outside the home cage increased their trill call rate and uttered more trills in response to their partner compared to strangers. The fundamental frequency, F0, of trills increased when animals were placed outside the cage. Our results indicate that trill calls can be monitored using wearable audio equipment and that minor changes in social context affect trill call interactions and spectral properties of trill calls.

A Strategy for Alleviating Micro Arcing during HiPIMS Deposition of DLC Coatings.

In this work, we investigate the use of high power impulse magnetron sputtering (HiPIMS) for the deposition of micrometer thick diamond like carbon (DLC) coatings on Si and steel substrates. The adhesion on both types of substrates is ensured with a simple Ti interlayer, while the energy of impinging ions is adjusted by using RF (Radio Frequency) biasing on the substrate at -100 V DC self-bias. Addition of acetylene to the working Ar+Ne atmosphere is investigated as an alternative to Ar sputtering, to improve process stability and coatings quality. Peak current is maintained constant, providing reliable comparison between different deposition conditions used in this study. The main advantages of adding acetylene to the Ar+Ne gas mixture are an increase of deposition rate by a factor of 2, when comparing to the Ar+Ne process. Moreover, a decrease of the number of surface defects, from ~40% surface defects coverage to ~1% is obtained, due to reduced arcing. The mechanical and tribological properties of the deposited DLC films remain comparable for all investigated gas compositions. Nanoindentation hardness of all coatings is in the range of 25 to 30 GPa, friction coefficient is between 0.05 and 0.1 and wear rate is in the range of 0.47 to 0.77 × 10-6 mm3 N-1m-1.

Atypical behaviour and connectivity in SHANK3-mutant macaques.

Mutation or disruption of the SH3 and ankyrin repeat domains 3 (SHANK3) gene represents a highly penetrant, monogenic risk factor for autism spectrum disorder, and is a cause of Phelan-McDermid syndrome. Recent advances in gene editing have enabled the creation of genetically engineered non-human-primate models, which might better approximate the behavioural and neural phenotypes of autism spectrum disorder than do rodent models, and may lead to more effective treatments. Here we report CRISPR-Cas9-mediated generation of germline-transmissible mutations of SHANK3 in cynomolgus macaques (Macaca fascicularis) and their F1 offspring. Genotyping of somatic cells as well as brain biopsies confirmed mutations in the SHANK3 gene and reduced levels of SHANK3 protein in these macaques. Analysis of data from functional magnetic resonance imaging revealed altered local and global connectivity patterns that were indicative of circuit abnormalities. The founder mutants exhibited sleep disturbances, motor deficits and increased repetitive behaviours, as well as social and learning impairments. Together, these results parallel some aspects of the dysfunctions in the SHANK3 gene and circuits, as well as the behavioural phenotypes, that characterize autism spectrum disorder and Phelan-McDermid syndrome.

Deep convolutional network for animal sound classification and source attribution using dual audio recordings.

This paper introduces an end-to-end feedforward convolutional neural network that is able to reliably classify the source and type of animal calls in a noisy environment using two streams of audio data after being trained on a dataset of modest size and imperfect labels. The data consists of audio recordings from captive marmoset monkeys housed in pairs, with several other cages nearby. The network in this paper can classify both the call type and which animal made it with a single pass through a single network using raw spectrogram images as input. The network vastly increases data analysis capacity for researchers interested in studying marmoset vocalizations, and allows data collection in the home cage, in group housed animals.

Sputtered Si and Mg doped hydroxyapatite for biomedical applications.

Hydroxyapatite (HAP) coatings are applied on metallic implant materials to combine mechanical properties of metallic material with bioactivity abilities of HAP ceramic. In this study, HAP coatings with additions of Si and Mg are proposed to be deposited on Ti6Al4V substrates by RF magnetron sputtering. Chemical bonding, morphology, topography and corrosion resistance in simulated body fluids (SBF) of the coatings were investigated. Additionally, mechanical and biological properties of the coatings were evaluated. It was found that the addition of Si and Mg does not influence the formation of a HAP phase. All the coatings exhibited smooth surface and uniform growth, without defects or cracks. Both hardness and elastic modulus of the coated samples decrease with Mg addition in the HAP-Si structure. Both Mg and Si addition into HAP coatings were found to enhance the corrosion resistance of the Ti6Al4V alloy in the SBF solution. Coatings with low Mg content exhibited better corrosion performance. All the coatings investigated were biocompatible, as demonstrated by SaOS-2 bone cell attachment and growth. However, cell proliferation and morphology were inferior on samples with the highest Mg content.

Effect of SiC interlayer between Ti6Al4V alloy and hydroxyapatite films.

Bioactive coatings are frequently used to improve the osseointegration of the metallic implants used in dentistry or orthopaedics. Among different types of bioactive coatings, hydroxyapatite (Ca10(PO4)6(OH)2) is one of the most extensively used due to its chemical similarities to the components of bones and teeth. In this article, production and characterization of hydroxyapatite films deposited on Ti6Al4V alloy prepared by magnetron sputtering were reported. Besides, SiC was deposited on substrate surface to study the interlayer effect. Obtained coatings were annealed at 600 °C for 30 and 120 min in a mixed atmosphere of N2 + H2O vapours with the heating rate of 12 °C min(-1). The effects of SiC interlayer and heat treatment parameters on the structural, mechanical and corrosion properties were investigated. After heat treatment process, the crystalline hydroxyapatite was obtained. Additionally, cell viability tests were performed. The results show that the presence of the SiC interlayer contributes a decrease in surface roughness and improves the mechanical properties and corrosion performance of the hydroxyapatite coatings. Biological properties were not affected by the presence of the SiC interlayer.

Ten-year all-cause mortality in hospitalized non-surgical patients based on nutritional status screening.

OBJECTIVE: Malnutrition is common in patients admitted to hospital due to acute illness and contributes to negative patient outcomes. In Slovakia there is a lack of relevant data on malnutrition in hospitalized patients, particularly based on chronic co-morbidity and survival. The aim of the present study was to explore the prevalence of malnutrition in hospitalized chronic patients, its relationship to co-morbidity and its impact on 10-year survival. DESIGN: Retrospective cohort study. SETTING: Nutritional status was estimated by Subjective Global Assessment (SGA), BMI and serum albumin level. Survival was assessed from the National Insurance Registry over a 10-year period. The association between nutritional status measured by SGA and 10-year survival controlling for age, gender, BMI and serum albumin was analysed using Cox regression. SUBJECTS: Data were taken from the medical records of 202 consecutively admitted chronic patients. Results Median age was 63·5 years; 55·4 % were males; median BMI was 25·9 kg/m2; median serum albumin level was 39·0 g/l. Based on SGA evaluation, 38·1 % did not have sufficient nutritional status (SGA classification B and C). Malnutrition was more common in patients who were older (P=0·023), with lower BMI (P<0·001), who had gastrointestinal (P=0·049) and oncologic co-morbidity (P=0·021) and lower albumin level (P=0·049). In-hospital mortality was 3 %, but during the following 10 years 52 % died. Cox regression analysis controlling for age, gender, BMI and serum albumin showed that SGA was an independent predictor of death (hazard ratio=1·55; 95 % CI 1·04, 2·32; P=0·031). CONCLUSIONS: SGA is a simple screening tool that can be routinely used in hospitalized Slovak medical patients to predict the risk of death. Improving patient nutrition could thus reduce mortality.